若干杂环模型化合物的热氧化稳定性

<正> 自五十年代以来,耐热的杂环高分子取得了很多进展。曾报道聚酰亚胺、聚苯并咪唑、聚苯并噻唑、聚苯并噁唑、聚喹噁林及聚苯并噁嗪酮等都是性能较好的耐热高分子,而有些在工业上已得到应用。我们在进行芳杂环二腈聚合的工作中,曾将上述杂环结构引入二腈,以期获得性能优良的耐热高分子,所得结果已陆续报道。     

含氟芳杂环高分子及其在微电子工业中的研究进展

综述了近年来国内外在含氟芳杂环高分子方面的研究及应用进展情况。主要介绍了含氟聚苯并睬咪唑(PBI)、聚苯并喏唑(PBO)、聚芳醚(PAE)及其衍生物等材料。从含氟单体的合成、聚合物的合成及其应用等几个方面进行了阐述。     

磷酸掺杂的聚苯并咪唑复合膜在高温质子交换膜燃料电池中的应用

磷酸掺杂的聚苯并咪唑复合膜在高温质子交换膜燃料电池中的应用     

聚苯并咪唑的合成、性能及在燃料电池膜材料中的应用

讨论了聚苯并咪唑（PBI）的制备、种类及其性能，综述了围绕PBI用作质子导电材料的改性、掺杂及质子输送机理的研究进展，评述了PBI在质子交换膜中应用的进展。     

非氟质子传导聚合物膜的制备与性能

综述了燃料电池非氟聚合物质子传导膜的研究进展，主要包括聚苯并咪唑、聚芳醚酮、聚酰亚胺、聚喹啉和聚砜体系的制备、性能及在燃料电池中的应用，并预测了今后研究的发展方向。     

聚苯并咪唑可以溶解金

徐光宪等发现,单质金在温和条件下可溶于聚苯并咪唑之中,形成一种聚合物凝胶。金在中性无腐蚀性介质中,如在加有聚苯并咪唑的 DMF 溶液中,于室     

新型砜基聚苯并咪唑的合成

采用新的合成路线,以多聚磷酸催化4,4′-二羧基二苯砜与邻苯二胺反应制得双苯并咪唑二苯砜(3);以3和4,4′-二氟二苯砜为单体,环丁砜为溶剂,在无水碳酸钾存在下合成了新型砜基聚苯并咪唑,其结构经1H NMR,IR,MS和元素分析表征.     

高通量聚苯并咪唑纳滤膜的结构调控及性能

聚苯并咪唑(PBI)是一种类杂环聚合物,具有独特的耐高温性、化学稳定性和机械稳定性,因而被广泛用作膜材料.PBI膜具有很高的选择性,在耐溶剂纳滤领域具有较好的应用前景.本文在PBI铸膜液中引入亲水性添加剂聚乙烯吡咯烷酮(PVP-K30),通过调节PVP的含量来改变成膜过程中的动力学过程,继而对PBI膜的结构进行进一步调控,从而改善其渗透通量.研究表明,随着制膜液中PVP含量的增加,通量不断升高,对染料的截留保持稳定.当PVP质量分数为15%时,PBI膜对亚甲基蓝的截留率达到99.18%,表现出优异的分离性能.     

支化型聚苯并咪唑高温质子交换膜的制备与性能研究

通过引入1,3,5-苯三酸作为支化结构,制备了一种新型的支化型聚醚聚苯并咪唑(OPBI)高温燃料电池质子交换膜,并对支化OPBI质子交换膜的磷酸掺杂率、抗氧化稳定性、机械性能以及质子传导率等一系列性质进行了深入研究.与线型聚苯并咪唑(PBI)相比,支化OPBI具有独特的三维空间结构,极大地提高了磷酸掺杂量,随着支化度的提高,磷酸掺杂率和质子传导率随之提高.支化度为9%时,聚合物的磷酸掺杂率高达9.2 PRU?1,质子传导率达到0.0314 S/cm.此外,支化OPBI膜的溶解性较线型PBI也有较大的改善,进一步提高了聚合物的可加工性.同时,支化OPBI膜的热稳定性和抗氧化稳定性也得到了一定程度的提高,虽然机械性能略有下降,但仍能满足高温燃料电池的使用要求.     

几种芳杂环高分子膜对气体分离性能的研究

聚苯基-1,2,4-三嗪(PPT)、聚苯基单醚喹嗯啉(PPQ(E))、聚苯基喹哑心啉(PPQ(B))、聚酰亚胺(PI)和聚苯并咪唑吡咯酮(PY)均是耐高温高分子。本文制备了这些高聚物的均质膜(除PI外),研完了它们对O_2、N_2和H_2、N_2、CO、CH_4的分离性。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.