Volumetric properties of ternary (IL + 2-propanol or 1-butanol or 2-butanol + ethyl acetate) systems and binary (IL + 2-propanol or 1-butanol or 2-butanol) and (1-butanol or 2-butanol + ethyl acetate) systems

The experimental densities for the binary or ternary systems were determined at T = (298.15, 303.15, and 313.15) K. The ionic liquid methyl trioctylammonium bis(trifluoromethylsulfonyl)imide ([MOA]⁺[Tf₂N]⁻) was used for three of the five binary systems studied. The binary systems were ([MOA]⁺[Tf₂N]⁻ + 2-propanol or 1-butanol or 2-butanol) and (1-butanol or 2-butanol + ethyl acetate). The ternary systems were {methyl trioctylammonium bis(trifluoromethylsulfonyl)imide + 2-propanol or 1-butanol or 2-butanol + ethyl acetate}. The binary and ternary excess molar volumes for the above systems were calculated from the experimental density values for each temperature. The Redlich–Kister smoothing polynomial was fitted to the binary excess molar volume data. Virial-Based Mixing Rules were used to correlate the binary excess molar volume data. The binary excess molar volume results showed both negative and positive values over the entire composition range for all the temperatures.The ternary excess molar volume data were successfully correlated with the Cibulka equation using the Redlich–Kister binary parameters.     

Excess molar volume and viscosity study for the ternary system tetrahydrofuran (1) + 1-chlorobutane (2) + 2-butanol (3) at 283.15, 298.15 and 313.15 K

This work reports the measured density, ρ, and viscosity, η, values of liquid mixtures of tetrahydrofuran (1) + 1-chlorobutane (2) + 2-butanol (3) at temperatures of 283.15, 298.15 and 313.15 K over a range of mole fractions and atmospheric pressure. Excess molar volume, V^E, viscosity deviations, Δη, and excess free energies of activation of viscous flow, ΔG^*E, have been calculated from experimental data and fitted to Cibulka, Singh et al. and Nagata and Sakura equations. The results were analyzed in terms of the molecular interaction between the components of the mixtures. Excess molar volumes and viscosity deviations were predicted from binary contributions using geometrical solution models, Tsao and Smith; Jacob and Fitzner; Kholer; Rastogi et al.; Radojkovic et al. Finally, experimental results are compared with those obtained by applying group-contribution method proposed by Wu.     

Isothermal (vapour + liquid) equilibrium at several temperatures of (1-chlorobutane + 1-butanol,or 2-methyl-2-propanol)

Vapour pressures of (1-chlorobutane  +  1-butanol, or 2-methyl-2-propanol) at several temperatures between T =  278.15 and T =  323.15 K were measured by a static method. Reduction of the vapour pressures to obtain activity coefficients and excess molar Gibbs energies was carried out by fitting the vapour pressure data to the Redlich–Kister equation according to Barker’s method. For (1-chlorobutane  +  2-methyl-2-propanol) azeotropic mixtures with a minimum boiling temperature were observed over the whole temperature range.     

Volumetric properties of binary mixtures of N-ethylformamide with tetrahydrofuran, 2-butanone,and ethylacetate from T = (293.15 to 313.15) K

Densities of binary liquid mixtures of N-ethylformamide (NEF) with tetrahydrofuran (THF), 2-butanone (B), and ethylacetate (EA) were measured at temperatures from (293.15 to 313.15) K and at atmospheric pressure over the whole composition range. Excess molar volumes, V^E, have been obtained from values of the experimental density and were fitted to the Redlich–Kister polynomial equation. The V^E values for all three mixtures are negative over the entire composition and temperature ranges. The V^E values become more negative as the temperature increases for all binary mixtures studied. Other volumetric properties, such as isobaric thermal expansion coefficients, partial molar volumes, apparent molar volumes, partial molar excess volumes and excess thermal expansions have been calculated.     

Excess molar volume of (linalool + an alkanol) atT = 303.15 K

In this paper, densities of (linalool  +  methanol, or ethanol, or n -propanol, or n -butanol) are determined at T =  303.15 K using a vibrating-tube densimeter. The excess molar volumes V_m^Evalues are negative in all the systems over the entire composition range and correlated by the Redlich–Kister equation. The effects of chain length of alkanols onV_m^E have been discussed.     

Volumetric and viscometric properties of aqueous solutions of N-(2-hydroxyethyl)morpholine at T = (293.15, 303.15, 313.15, 323.15, 333.15) K

Densities, ρ, and viscosities, η, of aqueous solutions of N-(2-hydroxyethyl)morpholine were measured over the entire composition range at T = (293.15, 303.15, 313.15, 323.15, 333.15) K and at atmospheric pressure. The excess molar volumes V^E and viscosity deviations η^E of aqueous solutions were calculated from the experimental results of density and viscosity measurements and fitted to the Redlich–Kister polynomial equation. Apparent molar volumes V?, partial molar volume at infinite dilution V^∞, and the thermal expansion coefficient α were also calculated. The V^E values were found to be negative over the entire composition range at all temperatures studied and become less negative with increasing temperature, whereas the viscosity data η^E exhibited positive deviations from ideal behaviour.     

Physico-chemical and excess properties of the binary mixtures of methylcyclohexane + ethanol, + propan-1-ol, + propan-2-ol, + butan-1-ol, + 2-methyl-1-propanol,or 3-methyl-1-butanol at T = (298.15, 303.15, and 308.15) K

Physico-chemical properties viz., density, viscosity, and refractive index at temperatures = (298.15, 303.15, and 308.15) K and the speed of sound at T = 298.15 K are measured for the binary mixtures of methylcyclohexane with ethanol, propan1-ol, propan-2-ol, butan-1-ol, 2-methyl-1-propanol, and 3-methyl-1-butanol over the entire range of mixture composition. From these data, excess molar volume, deviations in viscosity, molar refraction, speed of sound, and isentropic compressibility have been calculated. These results are fitted to the polynomial equation to derive the coefficients and standard errors. The experimental and calculated quantities are used to study the nature of mixing behaviours between the mixture components.     

Investigation of the isothermal (vapour + liquid) equilibria of aqueous 2-amino-2-methyl-1-propanol (AMP), N-benzylethanolamine,or 3-dimethylamino-1-propanol solutions at several temperatures

The vapour pressures of (2-amino-2-methyl-1-propanol (AMP) + water), (N-benzylethanolamine + water), or (3-dimethylamino-1-propanol + water) binary mixtures, and of pure AMP and 3-dimethylamino-1-propanol components were measured by means of two static devices at temperatures between 283 K and 363 K. The data were correlated with the Antoine equation. From these data, excess Gibbs functions (G^E) were calculated for several constant temperatures and fitted to a fourth-order Redlich–Kister equation using the Barker’s method. The {2-amino-2-methyl-1-propanol (AMP) + water} binary mixture exhibits negative deviations in G^E (at T < 353.15 K) and a sinusoidal shape for G^E for the higher temperatures over the whole composition range. For the aqueous N-benzylethanolamine solution, a S shape is observed for the G^E for all investigated temperatures over the whole composition range. The (3-dimethylamino-1-propanol + water) binary mixture exhibits negative deviations in G^E (at T < 293.15 K), positive deviations in G^E (for 293.15 K < T < 353.15 K) and a sinusoidal shape for G^E for the higher temperatures over the whole composition range.     

Volumetric study of (2-methoxyethanol + tetrahydrofuran + cyclohexane) at T=298.15 K

The excess molar volumes V_m^E at T=298.15 have been determined in the whole composition domain for (2-methoxyethanol + tetrahydrofuran + cyclohexane) and for the parent binary mixtures. Data on V_m^E are also reported for (2-ethoxyethanol + cyclohexane). All binaries showed positive V_m^E values, small for (methoxyethanol + tetrahydrofuran) and large for the other ones. The ternary V_m^E surface is always positive and exhibits a smooth trend with a maximum corresponding to the binary (2-methoxyethanol + cyclohexane). The capabilities of various models of either predicting or reproducing the ternary data have been compared. The behaviour of V_m^E and of the excess apparent molar volume of the components is discussed in both binary and ternary mixtures. The results suggest that hydrogen bonding decreases with alcohol dilution and increases with the tetrahydrofuran content in the ternary solutions.     

Application of the PFV EoS correlation to excess molar volumes of (1-ethyl-3-methylimidazolium ethylsulfate + alkanols) at different temperatures

The experimental densities for the binary systems of an ionic liquid and an alkanol {1-ethyl-3-methylimidazolium ethylsulfate [EMIM]⁺ [EtSO₄]^? + methanol or 1-propanol or 2-propanol} were determined at T = (298.15, 303.15, and 313.15) K. The excess molar volumes for the above systems were then calculated from the experimental density values for each temperature. The Redlich–Kister smoothing polynomial was used to fit the experimental results and the partial molar volumes were determined from the Redlich–Kister coefficients. For all the systems studied, the excess molar volume results were negative over the entire composition range for all the temperatures. The excess molar volumes were correlated with the pentic four parameter virial (PFV) equation of state (EoS) model.     

Thermodynamic properties of (tetradecane + benzene, + toluene, + chlorobenzene, + bromobenzene, + anisole) binary mixtures at T = (298.15, 303.15, and 308.15) K

Density ρ, viscosity η, and refractive index n_D, values for (tetradecane + benzene, + toluene, + chlorobenzene, + bromobenzene, + anisole) binary mixtures over the entire range of mole fraction have been measured at temperatures (298.15, 303.15, and 308.15) K at atmospheric pressure. The speed of sound u has been measured at T = 298.15 K only. Using these data, excess molar volume V^E, deviations in viscosity Δη, Lorentz–Lorenz molar refraction ΔR, speed of sound Δu, and isentropic compressibility Δk_s have been calculated. These results have been fitted to the Redlich and Kister polynomial equation to estimate the binary interaction parameters and standard deviations. Excess molar volumes have exhibited both positive and negative trends in many mixtures, depending upon the nature of the second component of the mixture. For the (tetradecane + chlorobenzene) binary mixture, an incipient inversion has been observed. Calculated thermodynamic quantities have been discussed in terms of intermolecular interactions between mixing components.     

Henry’s law constants and infinite dilution activity coefficients of cis-2-butene,dimethylether, chloroethane,and 1,1-difluoroethane in methanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol,isobutanol, tert-butanol, 1-pentanol, 2-pentanol, 3-pentanol, 2-methyl-1-butanol, 3-methyl-1-butanol,and 2-methyl-2-butanol

Henry’s law constants and infinite dilution activity coefficients of cis-2-butene, dimethylether, chloroethane, and 1,1-difluoroethane in methanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, isobutanol, tert-butanol, 1-pentanol, 2-pentanol, 3-pentanol, 2-methyl-1-butanol, 3-methyl-1-butanol, and 2-methyl-2-butanol in the temperature range of 250 K to 330 K were measured by a gas stripping method and partial molar excess enthalpies were calculated from the activity coefficients. A rigorous formula for evaluating the Henry’s law constants from the gas stripping measurements was used for the data reduction of these highly volatile mixtures. The uncertainty is about 2% for the Henry’s law constants and 3% for the estimated infinite dilution activity coefficients. In the evaluation of the infinite dilution activity coefficients, the nonideality of the solute such as the fugacity coefficient and Poynting correction factor cannot be neglected, especially at higher temperatures. The estimated uncertainty of the infinite dilution activity coefficients includes 1% for nonideality.     

Excess molar volumes and viscosities of (1,1,2,2-tetrabromoethane + 1-alkanols) at T = (293.15 and 303.15) K

Density and viscosity measurements for binary mixtures of (1,1,2,2-tetrabromoethane + 1-pentanol, or + 1-hexanol, or + 1-heptanol, or + 1-octanol, or + 1-decanol) at T = (293.15 and 303.15) K, have been conducted at atmospheric pressure. The excess molar volumes V^E, have been calculated from the experimental measurements, and the results were fitted to Redlich–Kister equation. The viscosity data were correlated with the model of Grunberg and Nissan, and McAllister four-body model. The excess molar volumes of (1,1,2,2-tetrabromoethane + 1-pentanol, or + 1-haxanol, or + 1-heptanol, or + 1-octanol) had a sigmoidal shape and the values varied from negative to positive with the increase in the molar fraction of 1,1,2,2-tetrabromoethane. The remaining binary mixture of (1,1,2,2-tetrabromoethane + 1-decanol) was positive over the entire composition range. The effects of the 1-alkanol chain length as well as the temperature on the excess molar volume have been studied. The results have been qualitatively used to explain the molecular interaction between the components of these mixtures.     

Isothermal and isobaric (vapour + liquid) equilibria of (N,N- dimethylformamide + 2-propanol + 1-butanol)

The isothermal and isobaric (vapour  +  liquid) equilibria (v.l.e.) for (N, N - dimethylformamide  +  2-propanol  +  1-butanol) and the binary constituent mixtures were measured with an inclined ebulliometer. The experimental results are analyzed using the UNIQUAC equation with temperature-dependent binary parameters. The comparison between the experimental and literature results for binary systems is given. The ternary v.l.e. values are predicted from the binary results.     

Properties of pure 1-methylimidazolium acetate ionic liquid and its binary mixtures with alcohols

Densities and viscosities of the pure ionic liquid 1-methylimidazolium acetate ([Mim]Ac) and its binary mixtures with methanol, ethanol, 1-propanol, and 1-butanol were measured at temperature ranging from T = (293.15 to 313.15) K. The thermal expansion coefficient, molecular volume, standard entropy, and lattice energy of [Mim]Ac were deduced from the experimental density results. A simple linear equation was used to correlate the variation of viscosity of [Mim]Ac with temperature. Excess molar volumes V^E and viscosity deviations Δη for the binary mixtures at above mentioned temperature were calculated and fitted to the Redlich–Kister equation with satisfactory results. Excess molar volumes for {[Mim]Ac + 1-butanol} mixture have an S shape, while those for other mixtures have a negative deviation from ideal behaviour over the entire mole fraction range. Viscosity deviations are all negative deviation for {[Mim]Ac + alcohol} mixtures. The results were interpreted in terms of interactions and structural factors of binary mixtures.     

Volumetric and viscometric behaviour of binary systems: (1-hexanol + hydrocarbons)

Densities and viscosities of binary liquid mixtures of (1-hexanol  + n -hexane, or cyclohexane, or benzene) have been measured at a number of mole fractions at T =  (303, 313, and 323) K. The excess molar volume V_m^Eand apparent molar volume V_φhave been calculated from the density data. TheV_m^E anddV_m^E / dT for the system, (1-hexanol  + n -hexane) have been found negative, while those for the systems, (1-hexanol  +  cyclohexane) and (1-hexanol  +  benzene), were found to be positive. Excess viscosities η^Ecalculated from viscosity data, have been found to be negative over the whole composition range at the temperatures studied for all the three systems. Volumetric and viscometric behaviours indicate that dispersion is the major force of interaction between the components in (1-hexanol  +  cyclohexane, or benzene), while inclusion of hydrocarbon chains into the interstices of polymolecular ring structures of alcohol formed by hydrogen bonding has been assumed to play a significant role apart from dispersion in the system (1-hexanol  + n -hexane). Thermodynamic parameters of activation for viscous flow have been calculated from the viscosity data at different temperatures and a possible explanation suggested.     

Excess molar volumes and isentropic compressibility of binary systems {trioctylmethylammonium bis(trifluoromethysulfonyl)imide + methanol or ethanol or 1-propanol} at different temperatures

This paper reports measurements of densities for the binary systems of an ionic liquid and an alkanol at T = (298.15, 303.15, and 313.15) K. The IL is trioctylmethylammonium bis(trifluoromethylsulfonyl)imide [OMA]⁺[Tf₂N]^? and the alkanols are methanol, or ethanol, or 1-propanol. The speed of sound at T = 298.15 K for the same binary systems was also measured. The excess molar volumes and the isentropic compressibilities for the above systems were then calculated from the experimental densities and the speed of sound, respectively. Redlich–Kister smoothing polynomial equation was used to fit the excess molar volume and the deviation in isentropic compressibility data. The partial molar volumes were determined from the Redlich–Kister coefficients. For all the systems studied, the excess molar volumes have both negative and positive values, while the deviations in isentropic compressibility are negative over the entire composition range.     

Excess enthalpies and excess volumes of (2-methoxyethanol + 1,4-dioxane) and (1,2-dimethoxyethane + benzene) at temperatures between 283.15 K and 313.15 K

The measurement of excess enthalpies, H^E, at T=298.15 K and densities at temperatures between 283.15 K and 313.15 K are reported for the (2-methoxyethanol + 1,4-dioxane) and (1,2-dimethoxyethane + benzene) systems. The values of H^E and the excess volumes, V^E, are positive, and the temperature dependence of V^E is quite small for (2-methoxyethanol + 1,4-dioxane). The (1,2-dimethoxyethane + benzene) system shows a negative H^E and sigmoid curves in V^E, which change sign from positive to negative with an increase in 1,2-dimethoxyethane. The temperature dependence of V^E for this system is negative.     

Thermodynamic study of (heptane + amine) mixtures. II. Excess and partial molar volumes at 298.15 K

Excess molar volumes V^E at 298.15 K were determined by means of a vibrating tube densimeter for binary mixtures of heptane + primary n-alkyl (C₃ to C₁₀) and branched amines (iso-propyl-, iso-, sec-, and tert-butyl-, iso-, tert-pentyl-, and pentan-3-amine) in the whole composition range. The apparent molar volumes of solid dodecyl- and tetradecylamine in heptane dilute solution were also determined. The V^E values were found positive for mixtures involving C₃ to C₈ linear amines, with V^E decreasing with chain lengthening. Heptane + nonyl and decylamine showed s-shaped, markedly asymmetric, curves. Mixtures with branched C₃ to C₅ amines displayed positive V^E’s larger than those observed in the mixtures of the corresponding linear isomers. Partial molar volumes V° at infinite dilution in heptane were evaluated for the examined amines and compared with those of alkanes and alkanols taken from the literature. An additivity scheme, based on the intrinsic volume approach, was applied to estimate group (CH₃, CH₂, CH, C, NH₂, and OH) contributions to V°. The effect of branching on V° and the limiting slope of the apparent excess molar volumes were evaluated and discussed in terms of solute–solvent and solute–solute interactions.