Activity coefficients of CaCl2 in (serine or proline + water) mixtures at T = 298.15 K

Activity coefficients for the (CaCl₂ + amino acid + water) system were determined at a temperature of 298.15 K using ion-selective electrodes. The range of molalities of CaCl₂ is (0.01 to 0.20) mol · kg^?1, and that of amino acids is (0.10 to 0.40) mol · kg^?1. The activity coefficients obtained from the Debye–Hückel extended equation and the Pitzer equation are in good agreement with each other. Results show that the interactions between CaCl₂ and amino acid are controlled mainly by the electrostatic interactions (attraction). Gibbs free energy interaction parameters (g_EA) and salting constants (k_S) are positive, indicating that these amino acids are salted out by CaCl₂. These results are discussed based on group additivity model.     

Activity coefficients of electrolyte and amino acid in the systems (water + potassium chloride + dl -valine) at T = 298.15 K and (water + sodium chloride + l -valine) at T = 308.15 K

The activity coefficient data were reported for (water  +  potassium chloride  + dl -valine) at T =  298.15 K and (water  +  sodium chloride  + l -valine) at T =  308.15 K. The measurements were performed in an electrochemical cell using ion-selective electrodes. The maximum concentrations of the electrolytes and the amino acids studied were 1.0 molality and 0.4 molality, respectively. The results of the activity coefficients of dl -valine are compared with the activity coefficients of dl -valine in (water  +  sodium chloride  + dl -valine) system obtained from the previous study. The results show that the presence of an electrolyte and the nature of its cation have a significant effect on the activity coefficient of dl -valine in aqueous electrolyte solutions.     

Isopiestic measurement and solubility evaluation of the ternary system (CaCl2 + SrCl2 + H2O) at T = 298.15 K

Water activities in the ternary system (CaCl₂ + SrCl₂ + H₂O) and its sub-binary system (CaCl₂ + H₂O) at T = 298.15 K have been elaborately measured by an isopiestic method. The data of the measured water activity were used to justify the reliability of solubility isotherms reported in the literature by correlating them with a thermodynamic Pitzer–Simonson–Clegg (PSC) model. The model parameters for representing the thermodynamic properties of the (CaCl₂ + H₂O) system from (0 to 11) mol ⋅ kg⁻¹ at T = 298.15 K were determined, and the experimental water activity data in the ternary system were compared with those predicted by the parameters determined in the binary systems. Their agreement indicates that the PSC model parameters can reliably represent the properties of the ternary system. Under the assumption that the equilibrium solid phases are the pure solid phases (SrCl₂ ⋅ 6H₂O and CaCl₂ ⋅ 6H₂O)_(s) or the ideal solid solution consisting of CaCl₂ ⋅ 6H₂O_(s) and SrCl₂ ⋅ 6H₂O_(s), the solubility isotherms were predicted and compared with experimental data from the literature. It was found that the predicted solubility isotherm agrees with experimental data over the entire concentration range at T = 298.15 K under the second assumption described above; however, it does not under the first assumption. The modeling results reveal that the solid phase in equilibrium with the aqueous solution in the ternary system is an ideal solid solution consisting of SrCl₂ ⋅ 6H₂O_(s) and CaCl₂ ⋅ 6H₂O_(s). Based on the theoretical calculation, the possibility of the co-saturated points between SrCl₂ ⋅ 6H₂O_(s) and the solid solution (CaCl₂ ⋅ 6H₂O + SrCl₂ ⋅ 6H₂O)_(s) and between CaCl₂ ⋅ 6H₂O_(s) and the solid solution (CaCl₂ ⋅ 6H₂O + SrCl₂ ⋅ 6H₂O)_(s), which were reported by experimental researchers, has been discussed, and the Lippann diagram of this system has been presented.     

Activity coefficients of NaF in aqueous mixtures with ɛ-increasing co-solvent: formamide–water mixtures at 298.15 K

The electromotive force E, of the cell containing the ion-selective electrodes Na-ISE | NaF(m), formamide (Y), H₂O(100 − Y) | F-ISE has been measured at 298.15 K as a percentage of the weight of the amide in the mixed solvent. The percentage (Y) was varied from 0 to 90% in 10-unit steps, and the molality of the electrolyte (m) from approximately 0.005 to saturation. The corresponding standard electromotive forces, E⁰ (molal scale), were determined using traditional methods of extrapolation (Debye–Hückel and Pitzer equations). The results obtained by application of both equations show experimental errors of the same sort as those for this type of measurements. Once the E⁰ was obtained, we determined the mean ionic activity coefficients for NaF, the transfer free energy from water to the water–formamide mixture, and the NaF primary hydration number. The variation of these parameters, with the composition of this ɛ-increasing solvent, is discussed in comparison with that previously obtained for the ɛ-decreasing methanol–water and ethanol–water systems, in terms of both ion–solvent and ion–ion interactions and of the effect of the medium dielectric constant change.     

Thermodynamic study of the mixed system (CsCl + CaCl2 + H2O) by EMF Measurements at T = 298.15 K

This work reports the results of a thermodynamic investigation of the ternary mixed-electrolyte system (CsCl + CaCl₂ + H₂O). The activity coefficients of this mixed aqueous electrolyte system have been studied with the electromotive force measurement (EMF) of the cell: Cs ion-selective electrode (ISE)|CsCl(m_A), CaCl₂(m_B), H₂O|Ag/AgCl at T = 298.15 K and over total ionic strengths from (0.01 to 1.50) mol · kg^?1 for different ionic strength fractions y_B of CaCl₂ with y_B = (0, 0.2, 0.4, 0.6, and 0.8). The cesium ion-selective electrode (Cs-ISE) and the Ag/AgCl electrode used in this work were made in our laboratory and had a good Nernst response. The experimental results obey the Harned rule, and the Pitzer model can be used to describe this ternary system satisfactorily. The osmotic coefficients, excess Gibbs free energies and activities of water of the mixtures were also calculated.     

Phase equilibria for liquid mixtures of (benzonitrile + a carboxylic acid + water) atT = 298.15 K

(Liquid  +  liquid) equilibrium data are presented for mixtures of {benzonitrile(1)  +  acetic acid or propanoic acid or butanoic acid or 2-methylpropanoic acid or pentanoic acid or 3-methylbutanoic acid(2)  +  water(3)} atT =  298.15 K. The relative mutual solubility of each of the carboxylic acids is higher in the benzonitrile layer than in the aqueous layer. The influence of 3-methylbutanoic acid, pentanoic acid, 2-methylpropanoic acid, and butanoic acid on the solubility of the hydrocarbons in benzonitrile is greater than that of the acetic and propanoic acids. Three three-parameter equations have been fitted to the binodal curve data. These equations are compared and discussed in terms of statistical consistency. The NRTL and UNIQUAC models were used to correlate the experimental tie lines and to calculate the phase compositions of the ternary systems. The NRTL equation fitted the experimental data far better than the UNIQUAC equation. Selectivity values for solvent separation efficiency were derived from the tie line data.     

Volumetric study of (2-methoxyethanol + tetrahydrofuran + cyclohexane) at T=298.15 K

The excess molar volumes V_m^E at T=298.15 have been determined in the whole composition domain for (2-methoxyethanol + tetrahydrofuran + cyclohexane) and for the parent binary mixtures. Data on V_m^E are also reported for (2-ethoxyethanol + cyclohexane). All binaries showed positive V_m^E values, small for (methoxyethanol + tetrahydrofuran) and large for the other ones. The ternary V_m^E surface is always positive and exhibits a smooth trend with a maximum corresponding to the binary (2-methoxyethanol + cyclohexane). The capabilities of various models of either predicting or reproducing the ternary data have been compared. The behaviour of V_m^E and of the excess apparent molar volume of the components is discussed in both binary and ternary mixtures. The results suggest that hydrogen bonding decreases with alcohol dilution and increases with the tetrahydrofuran content in the ternary solutions.     

Ternary (liquid + liquid) equilibria for mixtures of (methanol + aniline + n-octane or n-dodecane) at T = 298.15 K

(Liquid + liquid) equilibrium (LLE) data for the ternary mixtures of (methanol + aniline + n-octane) and (methanol + aniline + n-dodecane) at T = 298.15 K and ambient pressure are reported. The compositions of liquid phases at equilibrium were determined and the results were correlated with the UNIQUAC and NRTL activity coefficient models. The partition coefficients and the selectivity factor of methanol for the extraction of aniline from the (aniline + n-octane or n-dodecane) mixtures are calculated and compared. Based on these comparisons, the efficiency of methanol for the extraction of aniline from (aniline + n-dodecane) mixtures is higher than that for the extraction of aniline from (aniline + n-octane) mixtures. The phase diagrams for the ternary mixtures including both the experimental and correlated tie lines are presented. From the phase diagrams and the selectivity factors, it is concluded that methanol may be used as a suitable solvent in extraction of aniline from (aniline + n-octane or n-dodecane) mixtures.     

Activity coefficients of glycine in aqueous electrolyte solutions: experimental data for (H2O + KCl + glycine) atT = 298.15 K and (H2O + NaCl + glycine) atT = 308.15 K

Electrochemical cells with two ion-selective electrodes against a single-junction reference electrode were used to obtain the activity coefficients of glycine in aqueous electrolyte solutions. Activity coefficient data were presented for {H₂O  +  KCl (m_S)  +  glycine (m_A)}, and {H₂O  +  NaCl (m_S)  +  glycine (m_A)} atT =  298.15 K and T =  308.15 K, respectively. The results show that the presence of an electrolyte and the nature of its cation have a significant effect on the activity coefficient of glycine in aqueous electrolyte solutions and, in turn, on the method of separation from its culture media. The results of the mean ionic activity coefficients of KCl were compared with those values reported in the literature, which were obtained by the isopiestic method. It was found that the method applied in this study provides accurate activity coefficient data. The effect of temperature on the mean ionic activity coefficient of NaCl in presence of glycine was also investigated.     

Physical properties of (propyl propanoate + hexane + toluene) at 298.15 K

The aim of this paper is to report experimental densities, excess molar enthalpies and refractive indexes of the ternary system (propyl propanoate + hexane + toluene) and of the corresponding binary mixtures (propyl propanoate + toluene) and (hexane + toluene) at the temperature 298.15 K and atmospheric pressure, over the whole composition range. Also, the excess molar volumes and the changes in the refractive index on mixing have been calculated from the measured data for all mixtures.     

(Liquid + liquid) equilibria for mixtures of (ethylene glycol + benzene + cyclohexane) at temperatures (298.15, 308.15, and 318.15) K

Experimental (liquid + liquid) equilibrium (LLE) data for a ternary system containing (ethylene glycol + benzene + cyclohexane) were determined at temperatures (298.15, 308.15, and 318.15) K and at atmospheric pressure. The experimental distribution coefficients and selectivity factors are presented to evaluate the efficiency of the solvent for extraction of benzene from cyclohexane. The effect of temperature in extraction of benzene from the (benzene + cyclohexane) mixture indicated that at lower temperatures the selectivity (S) is higher, but the distribution coefficient (K) is rather lower. The LLE results for the system studied were used to obtain binary interaction parameters in the UNIQUAC and NRTL models by minimizing the root mean square deviations (RMSD) between the experimental results and calculated results. Using the interaction parameters obtained, the phase equilibria in the systems were calculated and plotted. The NRTL model fits the (liquid + liquid) equilibrium data of the mixture studied slightly better. The root mean square deviations (RMSDs) obtained comparing calculated and experimental two-phase compositions are 0.92% for the NRTL model and 0.95% for the UNIQUAC model.     

Excess molar enthalpies of (methanol + 1-propanol) + oxane or 1,4-dioxane mixtures at the temperature 298.15 K

Experimental excess molar enthalpies H_m^E at the temperature 298.15 K and atmospheric pressure in a flow microcalorimeter are reported for the ternary mixtures: {x₁CH₃OH+x₂C₂H₅OH+(1−x₁−x₂)C₅H₁₀O} and {x₁CH₃OH+x₂C₂H₅OH+(1−x₁−x₂)C₄H₈O₂}. The results have been correlated by means of a polynomial equation and used to construct constant excess enthalpy contours. Further, the results have been compared with those calculated from a UNIQUAC associated-solution model taking into consideration the molecular association of like alcohols, solvation between unlike alcohols and alcohols with oxane (tetrahydropyran) or 1,4-dioxane using only binary information.     

Thermodynamic properties of (NaCl + KCl + LiCl + H2O) at T = 298.15 K: Water activities,osmotic and activity coefficients

The water activities of aqueous electrolyte mixture (NaCl + KCl + LiCl + H₂O) were experimentally determined at T = 298.15 K by the hygrometric method at total ionic-strength from 0.4 mol · kg⁻¹ to 6 mol · kg⁻¹ for different ionic-strength fractions y of NaCl with y = 1/3, 1/2, and 2/3. The data allow the deduction of new osmotic coefficients. The results obtained were correlated by Pitzer’s model and Dinane’s mixing rules ECA I and ECA II for calculations of the water activity in mixed aqueous electrolytes. A new Dinane–Pitzer model is proposed for the calculation of osmotic coefficients in quaternary aqueous mixtures using the newly ternary and quaternary ionic mixing parameters of this studied system. The solute activity coefficients of component in the mixture are also determined for different ionic-strength fractions y of NaCl.     

Hygrometric determination of the water activities and the osmotic and activity coefficients of (ammonium chloride + sodium chloride + water) atT = 298.15 K

The mixed aqueous electrolyte system of ammonium and sodium chlorides has been studied by the hygrometric method at the temperature 298.15 K. The relative humidities of this system were measured at total molalities from 0.3mol · kg ^− 1 to 6 mol · kg ^− 1for different ionic-strength fractions of NH ₄Cl with y =  (0.33, 0.50, and 0.67). The data obtained allow the deduction of new water activities and osmotic coefficients. The experimental results are compared with the predictions of the extended composed additivity model proposed in our previous work, the Robinson–Stokes, Reilly–Wood–Robinson, and Lietzke–Stoughton models. From these measurements, the new Pitzer mixing ionic parameters were determined and used to predict the solute activity coefficients in the mixture.     

Isothermal (vapour + liquid) equilibria and excess Gibbs free energies in some binary (cyclopentanone + chloroalkane) mixtures at temperatures from 298.15 K to 318.15 K

The vapour pressures of binary (cyclopentanone + 1-chlorobutane, +1,3-dichloropropane, and +1,4-dichlorobutane) mixtures, were measured at the temperatures of (298.15, 308.15, and 318.15) K. The vapour pressures vs. liquid phase composition data have been used to calculate the excess molar Gibbs free energies G^E of the investigated systems, using Barker’s method. Redlich–Kister, Wilson and NRTL equations, taking into account the vapor phase imperfection in terms of the second virial coefficient, have represented the G^E values. No significant difference between G^E values obtained with these equations has been observed.     

Thermodynamics of transfer of naphthalene and 2-naphthoic acid from water to (water + ethanol) mixtures at T=298.15 K

Standard thermodynamic functions of transfer of naphthalene and 2-naphthoic acid from water to (water + ethanol) mixtures at T=298.15 K have been determined from solubility measurements at different temperatures. Standard free energies of transfer of both naphthalene and 2-naphthoic acid showed decreasing tendency with the increasing x(EtOH), and the standard entropy and enthalpy of transfer exhibited a change of double peaks with x(EtOH). The Δ_trG⁰ of 2-naphthoic acid decreased more rapidly than that of naphthalene when x(EtOH) < 0.746 and lower than that of naphthalene when x(EtOH) >0.746 at T=298.15 K. The double peaks in the curves of standard entropy and enthalpy of transfer illustrated that the microstructure of the series of mixed solvents of (water + ethanol) underwent a variable process from ordered to disordered and then from disordered to ordered. The results mean that there is a relatively ordered structure near x(EtOH)=0.13 in the (water + ethanol) solutions besides the existence of a clathrate structure in the water-rich region.