Synthesis and structure of N-heterocyclic carbene complexes of rhodium and iridium derived from an imidazolium-linked cyclophane

This paper describes the synthesis, spectroscopic and structural characterisation, and electrochemical behaviour of some rhodium and iridium complexes of the form LM(X₁)(X₂)⁺, where L is a chelating bis(carbene) derived from an imidazolium-linked ortho-cyclophane. The complexes where X₁/X₂ = 1,5-cycooctadiene or norbornadiene were prepared from the imidazolium-linked cyclophane and the appropriate metal source. In these complexes, the M-L bonding was quite robust, but the diene could be displaced by CO to give the dicarbonyl complexes , from which one or both carbonyl ligands could be displaced by monodentate or bidentate phosphines, respectively. Structural studies revealed only minor variations in the cyclophane unit upon exchange of the ancillary ligands, in each case the rhodium complex being isomorphous with its iridium analogue. In cyclovoltammetric studies of LRh(dppe)⁺, reversible Rh(I/II) and Rh(II/III) redox couples were observed. The other rhodium complexes displayed more complex electrochemical behaviours and did not undergo simple reversible redox reactions.     

Quinoline-functionalized N-heterocyclic carbene complexes of iridium: Synthesis, structures and catalytic activities in transfer hydrogenation

Iridium complexes containing quinoline-functionalized N-heterocyclic carbene (NHC) ligands have been synthesized by the transmetalation route from silver carbene precursors. The silver complexes undergo a facile reaction with [Ir(COD)Cl]₂ (COD = 1,5-cyclooctadiene) to yield a series of carbene complexes [(NHC)Ir(COD)Cl] (NHC = 3-methyl-1-(8-quinolylmethyl)imidazole-2-ylidene (2a); 3-n-butyl-1-(8-quinolylmethyl)imidazole-2-ylidene (2b); 3-benzyl-1-(8-quinolylmethyl)imidazole-2-ylidene (2c); 1,3-di(8-quinolylmethyl)imidazole-2-ylidene (2d). The coordinated COD was replaced by carbon monoxide to yield the corresponding carbonyl species [(NHC)Ir(CO)₂Cl] (3). Complexes 2 and 3 have been characterized by IR, ESI-MS, ¹H and ¹³C NMR and elemental analyses. The molecular structures of complexes 2b and 2c have been confirmed by single-crystal X-ray diffraction. Two analogous Ir(I) complexes 5 and 6 with naphthalene-containing NHC have also been synthesized and characterized. These Ir(I) complexes in the current work have been proved to be active catalysts in the transfer hydrogenation of ketones to alcohols using 2-propanol as the hydrogen source.     

Rhodium N-heterocyclic carbene complexes: Synthesis,structure, NMR studies and catalytic activity

The solid state structure, phosphine dissociation rates and catalytic activity of several Rh-N-heterocyclic carbene complexes were studied. Catalytic activity for the hydrogenation of β-methylstyrene was improved by up to two orders of magnitude upon the addition of copper chloride. The catalyst with the highest inherent activity was found to be [Rh(IMes)(P-p-FC₆H₄)₃], although the p-methoxy derivative benefited the most from the addition of CuCl, giving turnover numbers of over 400 h⁻¹.     

Zinc N-heterocyclic carbene complexes and their polymerization of d,l-lactide

A series of zinc complexes of monodentate N-heterocyclic carbenes (NHCs) and a new sterically bulky bidentate pyridyl-NHC ligand have been synthesized and characterized by spectroscopic and X-ray crystallographic methods. Dinuclear alkoxide complexes of monodentate NHC complexes with 2,4,6-trimethylphenyl substituents appear to form monomeric species in solution and show good control and activity for lactide polymerization, including mild stereoelectivity as indicated by formation of heterotactic-enriched polylactide in d,l-lactide polymerizations. Kinetics studies revealed an overall second order rate law, first order in [LA] and [catalyst]. Efforts to obtain Zn–alkoxide complexes of a more sterically hindered NHC with 2,6-diisopropylphenyl groups were unsuccessful due to Zn–NHC bond scission. Ligand dissociation was also observed in attempts to prepare Zn–alkoxide complexes of the bidentate pyridyl-NHC system, despite its chelating nature.     

Synthesis of iridium pyridinyl N-heterocyclic carbene complexes and their catalytic activities on reduction of nitroarenes

Coordination of iridium(I) metal ions with a pyridinyl imidazol-2-ylidene ligand (pyNwedgeC-R) [R=Me, mesityl(2,4,6-trimethylphenyl)] that processes bulky substituents has been investigated. The iridium carbene complexes [(C-pyNwedgeC-R)IrCl(COD)] (COD=1,5-cyclooctadiene) are prepared via transmetalation from the corresponding silver carbene complexes. Upon the abstraction of chloride, the chelation of pyNwedgeC becomes feasible, resulting in the formation of [C,N-(pyNwedgeC-R)Ir(COD)](BF4) (4). The coordinated COD of complex 4 can be replaced by carbon monoxide to yield the corresponding carbonyl species [C,N-(pyNwedgeC-R)Ir(CO)2](BF4). The labile nature of the pyridinyl nitrogen donor is readily replaced by acetonitrile, as is evidenced by the NMR study. All iridium complexes show catalytic activity on the hydrogen-transfer reduction of carbonyl and nitro functionalities. By manipulation of the reaction conditions, the iridium-catalyzed reduction of nitroarenes can selectively provide aniline or azo compounds as the desired product.     

Synthesis and reactivity of alkyl-palladium N-heterocyclic carbene complexes

The transamination of alkyl-palladium halide N-heterocyclic carbene complexes has enabled the isolation of products that reveal interesting insights into the factors which might be barriers to the development of a palladium-catalysed alkyl-amination reaction.     

Synthesis, structure, and olefin polymerization with nickel(II) N-heterocyclic carbene enolates

Two novel N-heterocylic carbene enolate nickel complexes have been prepared and shown to be active for ethylene and propylene polymerization to yield linear polymers.     

Synthesis of monodentate bis(N-heterocyclic carbene) complexes of iridium: Mixed complexes of abnormal NHCs, normal NHCs, and triazole NHCs

A stepwise synthesis of mixed monodentate bis-NHC complexes of Ir(I), employing Ag(I)NHC complexes as transfer agents, yields complexes with two monodentate NHCs having different steric and electronic characteristics. The crystal structure of the mixed complex (5) with both a triazole-derived NHC ligand and an imidazole-derived NHC ligand is reported and both the NHC ring geometry and the M-NHC bond lengths are similar to related complexes. The complexes maintain their integrity over time and do not disproportionate, consistent with the NHC ligands not being labile.     

Synthesis and reactivity of triethylborane adduct of N-heterocyclic carbene: versatile synthons for synthesis of N-heterocyclic carbene complexes

The reaction of an imidazolium salt with LiBEt(3)H afforded triethylborane adduct of imidazol-2-ylidene, which can act as a carbene precursor for the synthesis of a transition metal complex as well as a main group element complex.     

Synthesis and catalytic activity of pyrazolyl-functionalized N-heterocyclic carbene palladium complexes

Three pyrazolyl-functionalized N-heterocyclic carbene (NHC) palladium complexes based on 1-[2-(pyrazol-1-yl)phenyl]imidazole have been synthesized and characterized by physico-chemical and spectroscopic methods, and the structures of two of the complexes have been confirmed by single-crystal X-ray diffraction. The pyrazolyl-functionalized NHCs act as chelating N,C-bidentate ligands in these three complexes. Catalytic tests have proved that these complexes exhibit highly effective catalytic activity for the Suzuki–Miyaura and Mizoroki–Heck coupling reactions in water or aqueous/organic media under air. The substituents on the pyrazolyl ring exert different influences on the catalytic activity of the complexes in these coupling reactions.     

Carbene complexes of rhodium and iridium from tripodal N-heterocyclic carbene ligands: synthesis and catalytic properties

Two tripodal trisimidazolium ligand precursors have been tested in the synthesis of new N-heterocyclic carbene rhodium and iridium complexes. [Tris(3-methylbenzimidazolium-1-yl)]methane sulfate gave products with coordination of the decomposed precursor. [1,1,1-Tris(3-butylimidazolium-1-yl)methyl]ethane trichloride (TIMEH(3)(Bu)) coordinated to the metal in a chelate and bridged-chelate form, depending on the reaction conditions. The crystal structures of two of the products are described. The compounds resulting from the coordination with TIME(Bu) were tested in the catalytic hydrosilylation of terminal alkynes.     

Synthesis,characterization and catalytic properties of cationic N-heterocyclic carbene silver complexes

Three new dibenzimidazolium salts bridged by 2-methylenepropane-1,3-diyl group were synthesized. Their dinuclear N-heterocyclic carbene Ag(I) complexes were prepared by the reactions of these salts with Ag₂O. The structures of the synthesized compounds were defined by nuclear magnetic resonance (NMR), Fourier-transform infrared spectroscopy (FT-IR), elemental analysis, and LC-MSMS (for complexes) techniques. Stability of the silver complexes was confirmed by ¹H NMR spectroscopy. Catalytic activities of Ag(I) compounds were tested for three-component coupling reaction of some aldehydes, amines, and phenylacetylene.     

Blue and near-UV phosphorescence from iridium complexes with cyclometalated pyrazolyl or N-heterocyclic carbene ligands

Two approaches are reported to achieve efficient blue to near-UV emission from triscyclometalated iridium(III) materials related to the previously reported complex, fac-Ir(ppz)(3) (ppz = 1-phenylpyrazolyl-N,C(2)'). The first involves replacement of the phenyl group of the ppz ligand with a 9,9-dimethyl-2-fluorenyl group, i.e., fac-tris(1-[(9,9-dimethyl-2-fluorenyl)]pyrazolyl-N,C(2)')iridium(III), abbreviated as fac-Ir(flz)(3). Crystallographic analysis reveals that both fac-Ir(flz)(3) and fac-Ir(ppz)(3) have a similar coordination environment around the Ir center. The absorption and emission spectra of fac-Ir(flz)(3) are red shifted from those of fac-Ir(ppz)(3). The fac-Ir(flz)(3) complex gives blue photoluminescence (PL) with a high efficiency (lambda(max) = 480 nm, phi(PL) = 0.38) at room temperature. The lifetime and quantum efficiency were used to determine the radiative and nonradiative rates (1.0 x 10(4) and 2.0 x 10(4) s(-1), respectively). The second approach utilizes N-heterocyclic carbene (NHC) ligands to form triscyclometalated Ir complexes. Complexes with two different NHC ligands, i.e., iridium tris(1-phenyl-3-methylimidazolin-2-ylidene-C,C(2)'), abbreviated as Ir(pmi)(3), and iridium tris(1-phenyl-3-methylbenzimidazolin-2-ylidene-C,C(2)'), abbreviated as Ir(pmb)(3), were both isolated as facial and meridianal isomers. Comparison of the crystallographic structures of the fac- and mer-isomers of Ir(pmb)(3) with the corresponding Ir(ppz)(3) isomers indicates that the imidazolyl-carbene ligand has a stronger trans influence than pyrazolyl and, thus, imparts a greater ligand field strength. Both fac-Ir(pmi)(3) and fac-Ir(pmb)(3) complexes display strong metal-to-ligand-charge-transfer absorption transitions in the UV (lambda = 270-350 nm) and phosphoresce in the near-UV region (E(0)(-)(0) = 380 nm) at room temperature with phi(PL) values of 0.02 and 0.04, respectively. The radiative decay rates for fac-Ir(pmi)(3) and fac-Ir(pmb)(3) (5 x 10(4) s(-1) and 18 x 10(4) s(-1), respectively) are somewhat higher than that of fac-Ir(flz)(3), but the nonradiative rates are two orders of magnitude faster (i.e., (2-4) x 10(6) s(-1)).     

Pyridinium-derived N-heterocyclic carbene complexes of platinum: synthesis, structure and ligand substitution kinetics

A series of [(R-iso-BIPY)Pt(CH(3))L ](+)X(-) complexes [R-iso-BIPY = N-(2-pyridyl)-R-pyridine-2-ylidene; (R = 4-H, 1; 4-tert-butyl, 2; 4-dimethylamino, 3; 5-dimethylamino, 4); L = SMe(2), b; dimethyl sulfoxide (DMSO), c; carbon monoxide (CO), d; X = OTf(-) = trifluoromethanesulfonate and/or [BPh(4)](-)] were synthesized by cyclometalation of the [R-iso-BIPY-H](+)[OTF](-) salts 1a-4a ([R-iso-BIPY-H](+) = N-(2-pyridyl)-R-pyridinium) with dimethylplatinum-micro-dimethyl sulfide dimer. X-ray crystal structures for 1b, 2c-4c as well as complexes having bipyridyl and cyclometalated phenylpyridine ligands, [(bipy)Pt(CH(3))(DMSO)](+) (5c) and (C(11)H(8)N)Pt(CH(3))(DMSO) (6c), have been determined. The pyridinium-derived N-heterocyclic carbene complexes display localized C-C and C-N bonds within the pyridinium ligand that are indicative of carbene pi-acidity. The significantly shortened platinum-carbon distance, for "parent" complex 1b, together with NMR parameters and the nu(CO) values for carbonyl cations 1d-4d support a degree of Pt-C10 multiple bonding, increasing in the order 3 < 4 < 2 < 1. Degenerate DMSO exchange kinetics have been determined to establish the nature and magnitude of the trans-labilizing ability of these new N-heterocyclic carbene ligands. Exceptionally large second-order rate constants (k(2) = 6.5 +/- 0.4 M(-1).s(-1) (3c) to 2300 +/- 500 M(-1).s(-1) (1c)) were measured at 25 degrees C using (1)H NMR magnetization transfer kinetics and variable temperature line shape analysis. These rate constants are as much as 4 orders of magnitude greater than those of a series of structurally similar cationic bis(nitrogen)-donor complexes [(N-N)Pt(CH(3))(DMSO)](+) reported earlier, and a factor of 32 to 1800 faster than an analogous charge neutral complex derived from cyclometalated 2-phenylpyridine, (C(11)H(8)N)Pt(CH(3))(DMSO) (k(2) = 0.21 +/- 0.02 M(-1).s(-1) (6c)). The differences in rate constant are discussed in terms of ground state versus transition state energies. Comparison of the platinum-sulfur distances with second order rate constants suggests that differences in the transition-state energy are largely responsible for the range of rate constants measured. The pi-accepting ability and trans-influence of the carbene donor are proposed as the origin of the large acceleration in associative ligand substitution rate.     

Synthesis of N-heterocyclic carbene rhenium(I) carbonyl complexes

Reaction of aminophosphinimine [RHN(CH(2))(2)N[double bond, length as m-dash]PPh(3)] (R = H, Et) with Re(2)(CO)(10) provided the NH-functionalized carbene rhenium complex [Re(2)(CNHCH(2)CH(2)NR)(CO)(9)] (3a, R = H, 3b, R = Et). Treatment of 3 with Br(2) provided the mono nuclear [Re(CNHCH(2)CH(2)NR)(CO)(4)Br] (1, R = H, 2, R = Et). However, NH-functionalized carbene complexes 1-3 did not undergo N-alkylation with alkyl halides to yield the N-substituted NHC complexes. The direct ligand substitution of [Re(CO)(5)Br] with a carbene donor was employed to prepare [Re(IMes(2))(CO)(4)Br] (6a, IMes(2) = 1,3-di-mesitylimidazol-2-ylidene; 6b, IMes(2) = 1,3-dimesityl-4,5-dihydroimidazol-2-ylidene). Analyses of spectroscopic and crystal data of 6a and 6b show similar corresponding data among these complexes, suggesting the saturated and unsaturated NHCs have similar bonding with Re(I) metal centers. Reduction of 6a and 6b with LiEt(3)BH yielded the corresponding hydrido complexes 7a-b [ReH(CO)(4)(IMes(2))], but not 1 and 2. Ligand substitution of 1, 6a and 6b toward 2,2'-bipyridine (bipy) was investigated. Crystal structures of 1, 3a-b, 6a-b and 7b were determined for characterization and comparison.     

Nickel N‐heterocyclic carbene complexes in the vinyl polymerization of norbornene

Vinyl polymerized norbornene has some useful properties such as good mechanical strength, optical transparency and heat resistance. Several transition metal complexes have been described in the literature as active catalysts for the vinyl polymerization of norbornene. We now report the use of three types of nickel(II) complexes with N‐heterocyclic carbene (NHC) ligands in the catalytic vinyl polymerization of norbornene under a range of conditions. Specifically, two nickel complexes bearing a chelating bis(NHC) ligand, two nickel complexes bearing two chelating anionic N‐donor functionalized NHC ligands as well as one diiodidonickel(II) complex with two monodentate NHC ligands were tested. The solid‐state structure of bis(1,3‐dimethylimidazol‐2‐ylidene)diiodidonickel(II), as determined by X‐ray crystallography, is presented. The highest polymerization activity of 2.6 × 10⁷ g (mol cat)^?1 h^?1 was observed using the latter nickel complex as catalyst, activated by methylaluminoxane. The norbornene polymers thus obtained are of high molecular weight but with rather low polydispersity. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis,structure and catalytic polymerization activity of half‐sandwich cyclometallated iridium complexes

A series of mononuclear half‐sandwich cyclometallated iridium complexes with Schiff base ligands were synthesized in good yields. Five air‐stable C,N‐chelate mode complexes were obtained smoothly through metal‐mediated C─H bond activation. Treatments of dimeric metal complexes [Cp*IrCl₂]₂ with ligands L1–L5 afforded the corresponding C,N‐chelate mononuclear half‐sandwich iridium(III) complexes 1 – 5 . These iridium complexes exhibit high catalytic activity for norbornene polymerization. Both steric and electronic effects of the substituted groups have influences on the behaviors of the polymerization process. All complexes were characterized using infrared and NMR spectroscopies and elemental analysis. Molecular structures of complexes 1 , 2 and 5 were further confirmed using single‐crystal X‐ray analysis.     

Synthesis and characterization of half-sandwich N-heterocyclic carbene complexes of cobalt and rhodium

A series of novel half-sandwich M(I) and M(III) complexes (M = Co, Rh) bearing the N-heterocyclic carbene ligand 1,3-dimesitylimidazol-2-ylidene (IMes) have been prepared and characterized. Thus, (eta5-C(5)R(5))M(IMes)(C(2)H(4))(M = Co, Rh; R = H, Me) were obtained from the corresponding bis(ethene) complexes (eta5-C(5)R(5))M(C(2)H(4))(2), except for CpRh(IMes)(C(2)H(4)) which was prepared via the novel 16-electron Rh(I) compound Rh(IMes)(C(2)H(4))(2)Cl. The carbonyl compounds (eta5-C(5)R(5))Co(IMes)(CO)(R = H, Me) were synthesized by thermal CO substitution of (eta5-C(5)R(5))Co(CO)(2). A diamagnetic, apparently 16-electron Co(III) compound [CpCo(IMes)I](+)[I(3)(-)] was obtained from CpCo(IMes)(CO) and I(2). Finally, Co(III) and Rh(III) complexes CpCo(IMes)Me(2) and Cp*Rh(IMes)Me(2) were prepared by methylation of [CpCo(IMes)I](+)[I(3)(-)], and ligand exchange at Cp*Rh(Me(2)SO)Me(2), respectively. The molecular structures of CpCo(IMes)(CO), CpRh(IMes)(C(2)H(4)), Cp*Rh(IMes)(C(2)H(4)), and Cp*Rh(IMes)Me(2) were determined by single crystal X-ray diffraction. Steric and electronic factors imposed by the strongly donating and sterically demanding IMes ligand are discussed on the basis of X-ray crystallographic, NMR, and IR spectroscopic analyses. Very poor correlations are found between values for (1)J(Rh-C(carbene)) and dRh-C(carbene) data for Rh(i) N,N-heterocyclic carbene complexes including literature data and this work.     

Electronic structure and ionization energies of palladium and platinum N-heterocyclic carbene complexes

Density functional methods have been used to calculate the geometries, electronic structure and ionization energies (IE) of N-heterocyclic carbene complexes of palladium and platinum, [M(CN2R2C2H2)2](M = Pd, Pt; R = H, Me, Bu t). Agreement with X-ray structures (R = Bu t) was good. Calculated IE agreed well with the photoelectron (PE) spectra (R = Bu t); metal bands were calculated to be within 0.25 eV of the experimental values, whereas the higher lying ligand bands deviated by up to 0.9 eV. Spin-orbit methods were needed to achieve this level of agreement for the Pt complex, but the calculations were found to underestimate the spin-orbit splitting somewhat. The principal metal-ligand bonding is between the carbene lone pair HOMO and a (d(z2)+ s) hybrid on the metal. The metal p(z) orbital contributes very little to the bonding. The metal d(xz,yz) orbitals mix primarily with the filled pi3 orbitals on the ligands and secondarily with the empty pi5 orbitals. Consequently they are little stabilized in comparison to the metal d(xy,x2- y2) orbitals, which are non-bonding in the complex. The first PE band for both the Pd and Pt complexes is from ionization of a (s - d(z2)) hybrid orbital. The IE is greater for Pt than for Pd on account of the post-lanthanide relativistic stabilization of the Pt 6s orbital.