Pitzer ion-interaction parameters for Fe(II) and Fe(III) in the quinary {Na + K + Mg + Cl + SO4 + H2O} system at T=298.15 K

This paper describes a chemical model that calculates (solid + liquid) equilibria in the {m₁FeCl₂ + m₂FeCl₃}(aq), {m₁FeSO₄ + m₂Fe₂(SO₄)₃}(aq), {m₁NaCl + m₂FeCl₃}(aq), {m₁Na₂SO₄ + m₂FeSO₄}(aq), {m₁NaCl + m₂FeCl₂}(aq), {m₁KCl + m₂FeCl₃}(aq), {m₁K₂SO₄ + m₂Fe₂(SO₄)₃}(aq), {m₁KCl + m₂FeCl₂}(aq), {m₁K₂SO₄ + m₂FeSO₄}(aq), and {m₁MgCl₂ + m₂FeCl₂}(aq) systems, where m denotes molality at T=298.15 K. The Pitzer ion-interaction model has been used for thermodynamic analysis of the experimental activity data in binary FeCl₂(aq) and FeCl₃(aq) solutions, and ternary solubility data, presented in the literature. The thermodynamic functions needed (binary and ternary parameters of ionic interaction, thermodynamic solubility products) have been calculated and the theoretical solubility isotherms have been plotted. The mixed solution model parameters {θ(MN) and ψ(MNX)} have been chosen on the basis of the compositions of saturated ternary solutions and data on the pure water solubility of the K₂SO₄ · FeSO₄ · 6H₂O double salt. The standard chemical potentials of four ferrous {FeCl₂ · 4H₂O, Na₂SO₄ · FeSO₄ · 4H₂O, K₂SO₄ · FeSO₄ · 6H₂O, and MgCl₂ · FeCl₂ · 8H₂O} and three ferric {FeCl₃ · 6H₂O, 2KCl · FeCl₃ · H₂O, and 2K₂SO₄ · Fe₂(SO₄)₃ · 14H₂O} solid phases have been determined. Comparison of solubility predictions with experimental data not used in model parameterization is given. The component activities of the saturated {m₁MgSO₄ + m₂FeSO₄}(aq) and in the mixed crystalline phase were determined and the change of the molar Gibbs free energy of mixing Δ_mixG^∘_m(s) of crystals was determined as a function of the solid phase composition. It is established that at T=298.15 K the mixed (Mg,Fe)SO₄ · 7H₂O and (Fe,Mg)SO₄ · 7H₂O crystals show small positive deviations from the ideal mixed crystals. Limitations of the {Fe(II) + Fe(III)} model due to data insufficiencies are discussed.     

(Liquid + solid) metastable equilibria in quinary system Li2CO3 + Na2CO3 + K2CO3 + Li2B4O7 + Na2B4O7 + K2B4O7 + H2O at T=288 K for Zhabuye salt lake

An experimental study on metastable equilibria at T=288 K in the quinary system Li₂CO₃ + Na₂CO₃ + K₂CO₃ + Li₂B₄O₇ + Na₂B₄O₇ + K₂B₄O₇ + H₂O was done by isothermal evaporation method. Metastable equilibrium solubilities and densities of the solution were determined experimentally. According to the experimental data, the metastable equilibrium phase diagram under the condition saturated with Li₂CO₃ was plotted, in which there are four invariant points; nine univariant curves; six fields of crystallization: K₂CO₃ · 3/2H₂O, K₂B₄O₇ · 5H₂O, Li₂B₂O₄ · 16H₂O, Na₂B₂O₄ · 8H₂O, Na₂CO₃ · 10H₂O, NaKCO₃ · 6H₂O. Some differences were found between the stable phase diagram at T=298 K and the metastable one at T=288 K.     

(Solid + liquid) metastable equilibria in quaternary system (Li2SO4 + K2SO4 + Li2B4O7 + K2B4O7 + H2O) at T = 288 K

Metastable equilibrium solubilities and properties such as densities, conductivity, pH, refractive index, and viscosity of the solution were determined experimentally. According to the experimental data, the metastable equilibrium phase diagram was plotted. In the phase diagram, there are three invariant points, seven univariant curves, five fields of crystallization: Li₂SO₄ · H₂O, K₂SO₄, Li₂B₄O₇ · 3H₂O, K₂B₄O₇ · 4H₂O, and K₂SO₄ · Li₂SO₄. The double salt K₂SO₄ · Li₂SO₄ was found in the quaternary system metastable equilibria. Lithium sulfate (Li₂SO₄) has the highest concentration and strong salting-out effects on other salts.Also, the relationship diagram between the properties and the ion concentration of solution was constructed. It can be seen from the relationship diagram that the equilibrium solution density values, viscosity values, and refractive index values are increased apparently with the rise of sulfate ion concentration, reaching the maximum values at eutonic point F3. Electrical conductivity values and pH values, however, fall down with the rise of ion concentration on the whole.     

Thermodynamic study of the system (LiCl + CaCl2 + H2O)

Solubility isotherms of the ternary system (LiCl + CaCl₂ + H₂O) were elaborately determined at T = (283.15 and 323.15) K. Several thermodynamic models were applied to represent the thermodynamic properties of this system. By comparing the predicted and experimental water activities in the ternary system, an empirical modified BET model was selected to represent the thermodynamic properties of this system. The solubility data determined in this work at T = (283.15 and 323.15) K, as well as those from the literature at other temperatures, were used for the model parameterization. A complete phase diagram of the ternary system was predicted over the temperature range from (273.15 to 323.15) K. Subsequently, the Gibbs free energy of formation of the solid phases CaCl₂ · 4 H₂O_(s), CaCl₂ · 2 H₂O_(s), LiCl · 2H₂O_(s), and LiCl · CaCl₂ · 5H₂O_(s) was estimated and compared with the literature data.     

Thermodynamic study of the system (LiCl + LiNO3 + H2O)

The solubility of the binary system (LiNO₃ + H₂O) from T = 273.15 K to T = 333.15 K and solubility isotherms of the ternary system (LiCl + LiNO₃ + H₂O) were elaborately measured at T = 273.15 K and T = 323.15 K. These solubility data, as well as water activities in the binary systems from the literature, were treated by an empirically modified BET model. The isotherms of the ternary system (LiCl + LiNO₃ + H₂O) were reproduced and a complete phase diagram of the ternary system in the temperature range from 273.15 K to 323.15 K predicted. It is shown that the solubility data for the binary system (LiNO₃ + H₂O) measured in this work are slightly different from the literature data. Simulated results showed that the saturated salt solution of (2.8LiCl + LiNO₃) is in equilibrium with the stable solid phase LiNO₃(s) over the temperature range from 283.15 K to 323.15 K, other than the solid phases LiNO₃ · 3H₂O(s) and LiClH₂O(s) as reported by Iyoki et al. [S. Iwasaki, Y. Kuriyama. T. Uemura, J. Chem. Eng. Data 38 (1993) 396–398].     

Study of bromide salts solubility in the (m1NaBr + m2MgBr2)(aq) system at T = 323.15 K. Thermodynamic model of solution behavior and (solid + liquid) equilibria in the (Na + K + Mg + Br + H2O) system to high concentration and temperature

The bromide minerals solubility in the mixed system (m₁NaBr + m₂MgBr₂)(aq) have been investigated at T = 323.15 K by the physico-chemical analysis method. The equilibrium crystallization of NaBr·2H₂O(cr), NaBr(cr), and MgBr₂·6H₂O(cr) has been established. The solubility-measurements results obtained have been combined with all other experimental equilibrium solubility data available in literature at T = (273.15 and 298.15) K to construct a chemical model that calculates (solid + liquid) equilibria in the mixed system (m₁NaBr + m₂MgBr₂)(aq). The solubility modeling approach based on fundamental Pitzer specific interaction equations is employed. The model gives a very good agreement with bromide salts equilibrium solubility data. Temperature extrapolation of the mixed system model provides reasonable mineral solubility at high temperature (up to 100 °C). This model expands the previously published temperature variable sodium–potassium–bromide and potassium–magnesium–bromide models by evaluating sodium–magnesium mixing parameters. The resulting model for quaternary system (Na + K + Mg + Br + H₂O) is validated by comparing solubility predictions with those given in literature, and not used in the parameterization process. Limitations of the mixed solution models due to data insufficiencies at high temperature are discussed.     

(Liquid + liquid) equilibrium of (NaClO4 + PEG 4000 + H2O) ternary system at different temperatures

Phase diagram and (liquid + liquid) equilibrium (LLE) results for {NaClO₄ + polyethylene glycol 4000 (PEG 4000) + H₂O} have been determined experimentally at T = (288.15, 298.15, and 308.15) K. The Chen-NRTL, modified Wilson and UNIQUAC models were used to correlate the values for the experimental tie-lines. The results show that the quality of fitting is better with the modified Wilson model.     

(Liquid + liquid) equilibria for ternary mixtures of (polyvinylpyrrolidone + MgSO4 + water) at different temperatures

Experimental (liquid + liquid) equilibrium (LLE) data were determined for a ternary system (polyvinylpyrrolidone + MgSO₄ + water) at various temperatures of (298.15, 303.15, and 308.15) K. The UNIQAC, modified regular solution, modified Wilson and Chen-NRTL models were used to correlate the experimental tie-line data. The results show that at each temperature, the quality of fitting is better with the Chen-NRTL model.     

Isopiestic measurement and solubility evaluation of the ternary system (CaCl2 + SrCl2 + H2O) at T = 298.15 K

Water activities in the ternary system (CaCl₂ + SrCl₂ + H₂O) and its sub-binary system (CaCl₂ + H₂O) at T = 298.15 K have been elaborately measured by an isopiestic method. The data of the measured water activity were used to justify the reliability of solubility isotherms reported in the literature by correlating them with a thermodynamic Pitzer–Simonson–Clegg (PSC) model. The model parameters for representing the thermodynamic properties of the (CaCl₂ + H₂O) system from (0 to 11) mol ⋅ kg⁻¹ at T = 298.15 K were determined, and the experimental water activity data in the ternary system were compared with those predicted by the parameters determined in the binary systems. Their agreement indicates that the PSC model parameters can reliably represent the properties of the ternary system. Under the assumption that the equilibrium solid phases are the pure solid phases (SrCl₂ ⋅ 6H₂O and CaCl₂ ⋅ 6H₂O)_(s) or the ideal solid solution consisting of CaCl₂ ⋅ 6H₂O_(s) and SrCl₂ ⋅ 6H₂O_(s), the solubility isotherms were predicted and compared with experimental data from the literature. It was found that the predicted solubility isotherm agrees with experimental data over the entire concentration range at T = 298.15 K under the second assumption described above; however, it does not under the first assumption. The modeling results reveal that the solid phase in equilibrium with the aqueous solution in the ternary system is an ideal solid solution consisting of SrCl₂ ⋅ 6H₂O_(s) and CaCl₂ ⋅ 6H₂O_(s). Based on the theoretical calculation, the possibility of the co-saturated points between SrCl₂ ⋅ 6H₂O_(s) and the solid solution (CaCl₂ ⋅ 6H₂O + SrCl₂ ⋅ 6H₂O)_(s) and between CaCl₂ ⋅ 6H₂O_(s) and the solid solution (CaCl₂ ⋅ 6H₂O + SrCl₂ ⋅ 6H₂O)_(s), which were reported by experimental researchers, has been discussed, and the Lippann diagram of this system has been presented.     

Thermodynamic evaluation and optimization of the (NaNO3 + KNO3 + Na2SO4 + K2SO4) system

A complete critical evaluation of all available phase diagram and thermodynamic data has been performed for all condensed phases of the (NaNO₃ + KNO₃ + Na₂SO₄ + K₂SO₄) ternary reciprocal system, and optimised model parameters have been found. The model parameters obtained for the four binary common-ion subsystems (i.e. (NaNO₃ + Na₂SO₄), (KNO₃ + K₂SO₄), (NaNO₃ + KNO₃) and (Na₂SO₄ + K₂SO₄)) are used to predict thermodynamic properties and phase equilibria for the entire system. The Modified Quasichemical Model in the Quadruplet Approximation for short-range ordering was used for the molten salt phase, and the Compound Energy Formalism was used for the various solid solutions.     

Thermodynamic study of the mixed system (CsCl + CaCl2 + H2O) by EMF Measurements at T = 298.15 K

This work reports the results of a thermodynamic investigation of the ternary mixed-electrolyte system (CsCl + CaCl₂ + H₂O). The activity coefficients of this mixed aqueous electrolyte system have been studied with the electromotive force measurement (EMF) of the cell: Cs ion-selective electrode (ISE)|CsCl(m_A), CaCl₂(m_B), H₂O|Ag/AgCl at T = 298.15 K and over total ionic strengths from (0.01 to 1.50) mol · kg^?1 for different ionic strength fractions y_B of CaCl₂ with y_B = (0, 0.2, 0.4, 0.6, and 0.8). The cesium ion-selective electrode (Cs-ISE) and the Ag/AgCl electrode used in this work were made in our laboratory and had a good Nernst response. The experimental results obey the Harned rule, and the Pitzer model can be used to describe this ternary system satisfactorily. The osmotic coefficients, excess Gibbs free energies and activities of water of the mixtures were also calculated.     

(Liquid + liquid) equilibrium of (NaNO3 + PEG 4000 + H2O) ternary system at different temperatures

Phase diagram and (liquid + liquid) equilibrium (LLE) data for the (NaNO₃ + polyethylene glycol 4000 (PEG 4000) + H₂O) system have been determined experimentally at T = (288.15 and 308.15) K. The effects of temperature on the binodal curves and tie-lines have been studied and it was found that an increasing in temperature caused the expansion of two-phase region. The Chen-NRTL, modified Wilson and UNIQUAC models were used to correlate the experimental tie-line data. The results show that the quality of fitting is better with the UNIQUAC model.     

Measurement and correlation of the solubility of MnSO4·H2O with MgSO4·7H2O in MeOH + H2O solution

Data on the solubility of manganese sulphate monohydrate in water, and in aqueous alcohols is essential for salting-out crystallization studies. The solubilities for the quaternary system MnSO₄·H₂O + MgSO₄·7H₂O + H₂O + MeOH solution were determined in the temperature ranges 293.2–308.2 K over the mole fraction methanol ranges of 0.00–0.16. The solubility data were used for modelling with the modified extended electrolyte non-random two-liquid (NRTL) equation. The present extension uses ion-specific parameters instead of the electrolyte-specific NRTL binary interaction parameters. This approach has feasibility for many electrolytes and mixed aqueous solution systems principally. The model was found to correlate the solubility data satisfactory.     

(Solid + solute) phase equilibria in aqueous solution. XIII. Thermodynamic properties of hydrozincite and predominance diagrams for (Zn2 + + H2O + CO2)

The thermodynamic properties ofZn₅(OH)₆(CO₃)₂ , hydrozincite, have been determined by performing solubility and d.s.c. measurements. The solubility constant in aqueous NaClO₄media has been measured at temperatures ranging from 288.15 K to 338.15 K at constant ionic strength (I =  1.00 mol · kg ^− 1). Additionally, the dependence of the solubility constant on the ionic strength has been investigated up to I =  3.00 mol · kg ^− 1NaClO₄at T =  298.15 K. The standard molar heat capacity C_{p, m}^ofunction fromT =  318.15 K to T =  418.15 K, as well as the heat of decomposition of hydrozincite, have been obtained from d.s.c. measurements. All experimental results have been simultaneously evaluated by means of the optimization routine of ChemSage yielding an internally consistent set of thermodynamic data (T =  298.15 K): solubility constant log ^* K_{ps 0}⁰ =  (9.0  ±  0.1), standard molar Gibbs energy of formationΔ_fG_m^o {Zn₅(OH)₆(CO₃)₂ }  =  ( − 3164.6  ±  3.0)kJ · mol ^− 1, standard molar enthalpy of formation Δ_fH_m^o{Zn₅(OH)₆(CO₃)₂ }  =  ( − 3584  ±  15)kJ · mol ^− 1, standard molar entropy S_m^o{Zn₅(OH)₆(CO₃)₂ }  =  (436  ±  50)J · mol ^− 1· K ^− 1and C_p,m^o / (J · mol ^− 1· K ^− 1)  =  (119  ±  11)  +  (0.834  ±  0.033)T / K. A three-dimensional predominance diagram is introduced which allows a comprehensive thermodynamic interpretation of phase relations in(Zn^2 +  +  H₂O  +  CO₂) . The axes of this phase diagram correspond to the potential quantities: temperature, partial pressure of carbon dioxide and pH of the aqueous solution. Moreover, it is shown how the stoichiometric composition{n(CO₃) / n(Zn)} of the solid compoundsZnCO₃ and Zn₅(OH)₆(CO₃)₂can be checked by thermodynamically analysing the measured solubility data.     

Activity coefficients of glycine in aqueous electrolyte solutions: experimental data for (H2O + KCl + glycine) atT = 298.15 K and (H2O + NaCl + glycine) atT = 308.15 K

Electrochemical cells with two ion-selective electrodes against a single-junction reference electrode were used to obtain the activity coefficients of glycine in aqueous electrolyte solutions. Activity coefficient data were presented for {H₂O  +  KCl (m_S)  +  glycine (m_A)}, and {H₂O  +  NaCl (m_S)  +  glycine (m_A)} atT =  298.15 K and T =  308.15 K, respectively. The results show that the presence of an electrolyte and the nature of its cation have a significant effect on the activity coefficient of glycine in aqueous electrolyte solutions and, in turn, on the method of separation from its culture media. The results of the mean ionic activity coefficients of KCl were compared with those values reported in the literature, which were obtained by the isopiestic method. It was found that the method applied in this study provides accurate activity coefficient data. The effect of temperature on the mean ionic activity coefficient of NaCl in presence of glycine was also investigated.     

(Liquid + liquid) equilibria of the (water + butyric acid + dodecanol) ternary system

(Liquid + liquid) equilibrium (LLE) data for the (water + butyric acid + dodecanol) ternary system have been determined experimentally at T = (298.2, 308.2 and 318.2) K. Complete phase diagrams were obtained by determining binodal curves and tie lines. The reliability of the experimental tie lines was confirmed by using the Othmer–Tobias correlation. The UNIFAC method was used to predict the phase equilibrium in the ternary system using the interaction parameters determined from experimental data of CH₃, CH₂, COOH, OH and H₂O functional groups. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

Thermodynamic study of (m1Cs2SeO4 + m2NiSeO4)(aq)wheremdenotes molality atT = 298.15 K

The isopiestic method has been used to determine the osmotic coefficients of the binary solutions Cs₂SeO₄(aq) at T =  298.15 K from (1.090 to 4.591)mol · kg ^− 1. The molalities m of (m₁Cs₂SeO₄ + m₂NiSeO₄)(aq) have been investigated by physicochemical analysis. The crystallization of a new double salt Cs₂SeO₄· NiSeO₄· 6H₂O has been established. The Pitzer ion-interaction model has been used for thermodynamic analysis of the results obtained. The thermodynamic data needed (binary and ternary parameters of ionic interaction, thermodynamic solubility products) have been calculated and the theoretical solubility isotherm has been plotted. The experimentally obtained and the calculated solubilities are in very good agreement. The standard molar Gibbs energy of the synthesis reaction Δ_rG_m^oof the double salt Cs₂SeO₄· NiSeO₄· 6H₂O from the corresponding simple salts Cs₂SeO₄and NiSeO₄· 6H₂O, as well as the standard molar Gibbs energy of formation Δ_rG_m^ohave been determined.     

Excess molar enthalpies of the ternary mixtures: (tetrahydrofuran or 2-methyltetrahydrofuran + methyl tert-butyl ether + n-octane) at the temperature 298.15 K

Microcalorimetric measurements of excess enthalpies at the temperature T = 298.15 K are reported for the two ternary mixtures {x₁(C₄H₈O or C₅H₁₀O) + x₂C₅H₁₂O + x₃C₈H₁₈}. Smooth representations of the results are presented and used to construct constant excess molar enthalpy contours on Roozeboom diagrams. It is shown that good estimates of the ternary enthalpies can be obtained from the Liebermann and Fried model, using only the physical properties of the components and their binary mixtures.     

A calorimetric and thermodynamic investigation of A2[(UO2)2(MoO4)O2] compounds with A = K and Rb and calculated phase relations in the system (K2MoO4 + UO3 + H2O)

A calorimetric and thermodynamic investigation of two alkali-metal uranyl molybdates with general composition A₂[(UO₂)₂(MoO₄)O₂], where A = K and Rb, was performed. Both phases were synthesized by solid-state sintering of a mixture of potassium or rubidium nitrate, molybdenum (VI) oxide and gamma-uranium (VI) oxide at high temperatures. The synthetic products were characterised by X-ray powder diffraction and X-ray fluorescence methods. The enthalpy of formation of K₂[(UO₂)₂(MoO₄)O₂] was determined using HF-solution calorimetry giving Δ_fH° (T = 298 K, K₂[(UO₂)₂(MoO₄)O₂], cr) = −(4018 ± 8) kJ · mol⁻¹. The low-temperature heat capacity, С_р°, was measured using adiabatic calorimetry from T = (7 to 335) K for K₂[(UO₂)₂(MoO₄)O₂] and from T = (7 to 326) K for Rb₂[(UO₂)₂(MoO₄)O₂]. Using these С_р° values, the third law entropy at T = 298.15 K, S°, is calculated as (374 ± 1) J · K⁻¹ · mol⁻¹ for K₂[(UO₂)₂(MoO₄)O₂] and (390 ± 1) J · K⁻¹ · mol⁻¹ for Rb₂[(UO₂)₂(MoO₄)O₂]. These new experimental results, together with literature data, are used to calculate the Gibbs energy of formation, Δ_fG°, for both phases giving: Δ_fG° (T = 298 K, K₂[(UO₂)₂(MoO₄)O₂], cr) = (−3747 ± 8) kJ · mol⁻¹ and Δ_fG° (T = 298 K, Rb₂[(UO₂)₂(MoO₄)], cr) = −3736 ± 5 kJ · mol⁻¹. Smoothed С_р°(Т) values between 0 K and 320 K are presented, along with values for S° and the functions [H°(T) − H°(0)] and [G°(T) − H°(0)], for both phases. The stability behaviour of various solid phases and solution complexes in the (K₂MoO₄ + UO₃ + H₂O) system with and without CO₂ at T = 298 K was investigated by thermodynamic model calculations using the Gibbs energy minimisation approach.     

Thermodynamic properties of (NaCl + KCl + LiCl + H2O) at T = 298.15 K: Water activities,osmotic and activity coefficients

The water activities of aqueous electrolyte mixture (NaCl + KCl + LiCl + H₂O) were experimentally determined at T = 298.15 K by the hygrometric method at total ionic-strength from 0.4 mol · kg⁻¹ to 6 mol · kg⁻¹ for different ionic-strength fractions y of NaCl with y = 1/3, 1/2, and 2/3. The data allow the deduction of new osmotic coefficients. The results obtained were correlated by Pitzer’s model and Dinane’s mixing rules ECA I and ECA II for calculations of the water activity in mixed aqueous electrolytes. A new Dinane–Pitzer model is proposed for the calculation of osmotic coefficients in quaternary aqueous mixtures using the newly ternary and quaternary ionic mixing parameters of this studied system. The solute activity coefficients of component in the mixture are also determined for different ionic-strength fractions y of NaCl.