Preparation and characterization of amino or carboxyl-functionalized ionic liquids

New functionalized ionic liquids,1-carboxylmethyl-3-methylimimidazolium hexafluorophosphate or fluoborate and 1-ami- noethyl-3-methylimimidazolium hexafluorophosphate or fluoborate have been synthesized and investigated.The obtained amino or carboxyl-functionalized ionic liquids were all characterized by FT-IR,~1H NMR and MS(ESI)and their properties such as freezing point,viscosity,solubility,specific gravity,surface tension,and interracial tension were also determined.     

Synthesis and Bio-activities of Pyrazolyl or Pyridinyl Substituted Tonghaosu Analogs

11 pyrazolyl or pyridinyl substituted tonghaosu analogs were synthesized. Structures of all the new compounds were confirmed by ^1H NMR, IR, MS, HREIMS or elemental analysis. Their antifeedant activity against larvae of large white butterfly （Pieris brassicae L.）, larvicidal activity toward mosquito （Culex quinquefasciatus Say） and growth control activity toward larvae of Spodoptera litura Fab were examined. Some of them exhibited antifeeding activities comparable to or stronger than tonghaosu Z-1. Based on the activity data, the preliminary structure-activity relationship was also discussed, which might be instructive for finding out lead compounds with better bioactivities in the future.     

Blend or copolymer? Spectroelectrochemical evidence of copolymerization and blending of two electrochromic monomers

A dipyrromethane functionalized monomer, 5-(4-tert-butylphenyl)dipyrromethane (DP), was synthesized to examine the spectral differences of its copolymer and blend with 3,4-ethylenedioxythiophene. Electrochemical polymerization, copolymerization, and blending of DP were achieved in LiClO₄/Acetonitrile. Spectral and electrochromic properties of products were investigated. Spectral properties of copolymer and blend revealed great differences from each other and also from their corresponding homopolymers. Effect of monomer feed ratio on the spectral properties of copolymer was also investigated.     

Promises and Problems of Mesoscale Materials Chemistry or Why Meso?

Manipulation and control of chemical structures on the mesoscale has recently developed to a very promising and also aesthetically appealing area of chemistry. This concept article tries to integrate the views of two experts to delineate the specific principles, approaches, and the novel opportunities for chemistry that arise from the rational control of matter and functionality on that scale.     

Synthesis and Spectra of Bichromophore Compounds Containing Oxazole or Oxadiazole Ring

Fifteen of the bichromophore compounds containing oxazole or oxidation ring have been synthesized. Their structures have been identified by IR, 1H NMR spectra and elemental analysis. The UV spectra, fluorescence spectra and the laser conversion efficiencies have been determined . The results of determination show that the absorption and emission spectra Pf the bichromophore compounds are different from those of the corresponding single chromophore compounds.     

Application of γ-cyclodextrin for the stabilization and/or dispersion of vegetable oils containing triglycerides of

To improve the storage stability of instable vegetable oils with a high content of polyunsaturated fatty acid triglycerides, these essential compounds can be complexed with native cyclodextrins. Only with -CD a nearly complete complexation of the oils was achieved as shown by complexation kinetics measurements. Storage trials of the insoluble CD-complexes followed by the determination of the peroxide value of the oils indicated that the best stabilization against autoxidation is obtained with -CD. An additional benefit of the complexation of triglycerides of polyunsaturated fatty acids with -cyclodextrin is the formation of stable dispersions of these oils in aqueous media.     

TDDFT Studies or Electronic Structure and First Hyperpolarizability of Tetra—nuc

The TDDFT method is first applied in a series of tetra-nuclear transition metal clusters studies for nonliear optical properties.The results indicate that the charge transfer inside the metal core[MCu3X4](M=W,Mo:X=S,O,Cl,Sc,Br)makes contribution to the optical nonlinearity.It is possible to enhance the hyperpolarizability by substituting the ligands of the clusters.     

Cyclization and halogenation of substituted o-allylphenols with diacetoxyiodobenzene in the presence of iodine or bromine

Substituted 2-halomethyl-2,3-dihydrobenzofurans were synthesized in one pot and in mild yield from substituted o-allylphenols with diacetoxyiodobenzene in the presence of 12 or Br2 in dry CH2Cl2 under reflux.     

Formation of inclusion complexes and controlled release of atrazine using free or silica-anchored β-cyclodextrin

Immobilization of cyclodextrin on the surface of silica was performed using citric acid as the bonding agent. Inclusion complexes of atrazine with free (CD) or anchored (CDSI) β-cyclodextrin were prepared and then characterized using infrared spectroscopy, X-ray diffraction and differential scanning calorimetry. The complexation reaction showed first order kinetics, with a rate constant (k) of 8.72?×?10^?3 min^?1. There was a rapid increase of absorbance in the first 40?min, followed by attainment of equilibrium after ~2?h. The stoichiometry of the reaction was 1:1, with both free and anchored β-cyclodextrin increasing the solubilization of atrazine in an aqueous medium (by around 1.5 and 3.4 times, respectively). The association constant (K _a) of the complex was 28.93?L?mol^?1 using CD and 130.68?L?mol^?1 using CDSI. In release tests, 62% of the atrazine complexed with CDSI or β-CD was released after 40?h, while 83% of free atrazine was released during the same period.     

Synthesis of functional derivatives ofN-carboxamidomethyl- andN-phthalimidomethyl-a-amino acids and peptides by reaction of amides and nitriles of α-amino acids with formaldehyde and primary amides or phthalimide

A direct method for the synthesis of functional derivatives ofN-carboxatnidomethyl- and N-phthalimidomethyl-a-amino acids by the reaction of nitriles and amides of -amino acids (including peptides) with formaldehyde and NH-compounds (amides and imides) in DMF in the presence of TsOH was developed. The reactions of the compounds synthesized with acetic anhydride, tosyl chloride, and phcnylalanine benzylamide in the presence of dicyclohexylcarbodiimide affording the corresponding N-acyl and N-sulfonyl derivatives or peptides containing carboxamido- and phthalimidomethyl substituents at the terminal N-atom of the peptide chain, were studied.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1480–1488, June, 1996.     

Solubilization of naproxen using N-methyl-2-pyrrolidone or ethanol and β-cyclodextrin

Solubility trend of naproxen in the presence of 5 and 10 mM of β-CD was measured at 298.2 K and compared with solubility profiles in the absence of β-CD for water + cosolvent mixtures. The saturated solutions of the given volume fractions were reached using shake-flask method, and then the solubility values were measured by UV spectrophotometric method at 256 nm. Afterwards, the experimental solubility data points of naproxen in water + ethanol (EtOH) and water + N-methyl-2-pyrrolidone with and without β-cyclodextrin (β-CD) were correlated with Jouyban–Acree model. Calculation results revealed that the back-calculated solubilities were in good agreement with the corresponding experimental values. By applying the correlated equations, one can rapidly predict the solubility of naproxen in all solvent compositions.     

Excess molar volumes of binary mixtures of 2,2,2-trifluoroethanol with water,or acetone,or 1,4-difluorobenzene,or 4-fluorotoluene,or α,α,α, trifluorotoluene or 1-alcohols at a temperature of 298.15 K and pressure of 101 kPa

Excess molar volumes V_m^E of binary mixtures of 2,2,2-trifluoroethanol with water, or acetone, or methanol, or ethanol, or 1-alcholos, or 1,4-difluorobenzene, or 4-fluorotoluene or α,α,α-trifluorotoluene were measured in a vibrating tube densimeter at temperature 298.15 K and pressure of 101 kPa. The V_m^E extrema are: 1.540 cm³ · mol⁻¹ for (2,2,2-trifluoroethanol + 1-heptanol); 1.452 cm³ · mol⁻¹ for (2,2,2-trifluoroethanol + 1-hexanol); 1.238 cm³ · mol⁻¹ for (2,2,2-trifluoroethanol + 1-butanol); 0.821 cm³ · mol⁻¹ for (2,2,2-trifluoroethanol + 4-fluorotoluene); 0.817 cm³ · mol⁻¹ for (2,2,2-trifluoroethanol + ethanol); 0.647 cm³ · mol⁻¹ for (2,2,2-trifluoroethanol + methanol); 0.618 cm³ · mol⁻¹ for (2,2,2-trifluoroethanol + acetone); 0.605 cm³ · mol⁻¹ for (2,2,2-trifluoroethanol + α,α,α-trifluorotoluene); 0.485 cm³ · mol⁻¹ for (2,2,2-trifluoroethanol + 1,4-difluorobenzene); and −0.656 cm³ · mol⁻¹ for (2,2,2-trifluoroethanol + water). The limiting excess partial molar volumes are estimated.     

Coordination behaviour and thermolysis of some rare-earth complexes with 4,4′-bipyridine and di- or trichloroacetates

A novel mixed-ligand complexes with empirical formulae: Dy(4-bpy)(CCl₂HCOO)₃ · H₂O and Ln(4-bpy)_1.5(CCl₃COO)₃ · 2H₂O (where Ln(III) = Ce, Nd) were prepared and characterized by chemical and elemental analysis and IR spectroscopy, conductivity (in methanol, dimethyloformamide and dimethylsulfoxide). Analysis of the diffractograms showed that the obtained complexes are crystalline. Way of metal-ligand coordination discussed. The thermal properties of complexes in the solid state were studied under non-isothermal conditions in air atmosphere. During heating the complexes decompose via intermediate products to the oxides: Ln₂O₃ (Nd, Dy) and CeO₂. TG-MS system was used to analyse principal volatile thermal decomposition and fragmentation products evolved during pyrolysis of Dy(4-bpy)(CCl₂HCOO)₃ · H₂O in air.     

New preparation of alkyl- and aryl-mono-η5-cyclopentadienylphosphine compounds or iron,cobalt and nickel

Tertiary phosphine stabilized homoleptic alkyl and aryl compounds of Fe, Co and Ni undergo protonolysis of their MC bonds with cyclopentadiene to produce the corresponding mono-η⁵-cyclopentadienyl complexes. Initial low reaction temperatures and the presence of phosphine ligands prevent the formation of metallocenes. This method allows the easy introduction of various achiral and chiral ligands into complexes of this class.     

Detection and Determination of Released Ions in the Presence of Nanoparticles: Selectivity or Strategy?

Metallic nanoparticles can release ionic species, but also both species can occur in the same samples. Therefore, there is a need of efficient and cost‐effective methods to determine these ionic species in the presence of the corresponding nanoparticles. Electroanalytical techniques open the door to this selective detection of NPs and their ions. In this work, a methodology that allows the direct determination of ionic silver (Ag⁺) in the presence of silver nanoparticles based on anodic stripping voltammetry was implemented. Silver nanoparticles were determined, after acidic digestion of the sample, by difference with respect to the total content of silver. The method was validated in terms of specific identification of silver ions, linearity, working range, limit of detection, limit of quantification, recovery, repeatability and ruggedness. All parameters are adequate for an analytical method following Eurachem recommendations. The validated method was used to determine the concentration of Ag⁺ and total silver in two commercial products of colloidal silver. The results were compared with those obtained by atomic absorption spectrometry in combination with an ultrafiltration step for isolation of ionic silver. There were no significant differences in the results. The proposed methodology benefits from the intrinsic selectivity of the electroanalysis methods, allowing to eliminate the steps of pretreatments of the samples, which are necessary in other techniques. The novelty of the article lies in the direct determination of Ag (I) ions in the presence of AgNPs, without the use of previous separation steps.     

Heterogeneous or homogeneous catalysis? Mechanistic studies of the rhodium-catalyzed dehydrocoupling of amine-borane and phosphine-borane adducts

In depth, comparative studies on the catalytic dehydrocoupling of the amine-borane adduct Me(2)NH.BH(3) (to form [Me(2)N-BH(2)](2)) and the phosphine-borane adduct Ph(2)PH.BH(3) (to form Ph(2)PH-BH(2)-PPh(2)-BH(3)) with a variety of Rh (pre)catalysts such as [[Rh(1,5-cod)(micro-Cl)](2)], Rh/Al(2)O(3), Rh(colloid)/[Oct(4)N]Cl, and [Rh(1,5-cod)(2)]OTf have been performed in order to determine whether the dehydrocoupling proceeds by a homogeneous or heterogeneous mechanism. The results obtained suggest that the catalytic dehydrocoupling of Me(2)NH.BH(3) is heterogeneous in nature involving Rh(0) colloids, while that of Ph(2)PH.BH(3) proceeds by a homogeneous mechanism even when starting with Rh(0) precursors such as Rh/Al(2)O(3). The catalytic dehydrocoupling reactions are thought to proceed by different mechanisms due to a combination of factors such as (i) the greater reducing strength of amine-borane adducts, (ii) the increased ease of dissociation of phosphine-borane adducts, and (iii) phosphine ligation and/or poisoning of active catalytic sites on metal colloids.     

Structure and reaction pathway of TMP-Zincate: amido base or alkyl base?

The novel directed ortho metalation (DoM) reagents for functionalized aromatic rings, TMP-Zn-ates (R2Zn(TMP)Li (R = Me, 1; tBu, 2)), have been reported to be synthetically useful for the chemo- and regioselective construction of multi-functionalized aromatic compounds. Here, we present the first comprehensive structural and mechanistic investigation by means of X-ray, NMR, and DFT studies on the DoM reaction employing our original TMP-Zn-ate base. The structures of TMP-Zn-ates in solution and in the solid state were determined. The DFT study strongly suggested that the deprotonation involving the TMP ligand on the TMP-Zn-ate is kinetically more favorable than that involving the alkyl ligand, and this view was supported by monitoring of the 13C NMR spectrum of the reaction mixture.     

Coupling of Methyl Ketones and Primary or Secondary Amines Leading to α-Ketoamides

A metal-free oxidative coupling of methyl ketones and primary or secondary amines to α-ketoamides has been developed. Four intermediates, α-iodoketone, α-aminoketone, iminium intermediate, and α-hydroxy amine have been identified through a series of control experiments. The atom-economic methodology can be scaled-up, tolerates a variety of functional groups, and is operationally simple.     

Site of protonation of nicotine and nornicotine in the gas phase: pyridine or pyrrolidine nitrogen?

The gas-phase basicities (GBs) of nornicotine, nicotine, and model pyrrolidines have been measured by FT-ICR. These experimental GBs are compared with those calculated (for the two sites of protonation in the case of nicotine and nornicotine) at the B3LYP/6-311+G(3df,2p)//B3LYP/6-31G(d,p) level, or those estimated from substituent effects on the GBs of 2-substituted pyrrolidines, 2-substituted N-methylpyrrolidines, and 3-substituted pyridines. It is found that, in contrast to the Nsp(3) protonation in water, in the gas phase nornicotine is protonated on the pyridine nitrogen, because the effects of an intramolecular CH.Nsp(3) hydrogen bond and of the polarizability of the 3-(pyrrolidin-2-yl) substituent add up on the Nsp(2) basicity, while the polarizability effect of the 2-(3-pyridyl) substituent on the Nsp(3) basicity is canceled by its field/inductive electron-withdrawing effect. The same structural effects operate on the Nsp(3) and Nsp(2) basicities of nicotine, but here, the polarizability effect of the methyl group puts the pyrrolidine nitrogen basicity very close to that of pyridine. Consequently, protonated nicotine is a mixture of the Nsp(3) and Nsp(2) protonated forms.