The role of modifier’s cation valence in structural properties of TeO2-based glasses

The compositional invariance of the Raman spectra of (1 ? x)TeO₂–xM_nO_m glasses (M = Ti, Nb) is analyzed and interpreted as evidence for the conservatism of a framework-type constitution inherent to such glasses. This is assigned to the chemical similarity of cations in the X–O–Y bridges (X, Y = Te⁴⁺, Ti⁴⁺, Nb⁵⁺) considered as the framework building blocks. It is concluded that the atoms of metals having valence IV and V can be placed into the category of such cations, to which certain of the atoms with valence III can be added.     

Photoinduced redox-reactions and transmission changes in glasses doped with 4d- and 5d-ions

(Fluoride)phosphate and borosilicate glasses of high intrinsic transparency in the deep ultraviolet (UV), were doped with 50–5000 ppm of the 4d- and 5d-ions Zr, Nb, Ta, Mo, or W. All of these ions absorb strongly in the UV. Samples plates were irradiated by UV lasers and the as a consequence generated various extrinsic and intrinsic defects were characterized by optical and EPR spectroscopy. The laser induced transmission changes depend not only on the glass matrix, but also on the valence of the dopants. Only fully oxidized d⁰-ions are observed in fluoroaluminate glasses. Laser irradiation photoreduces the d⁰-ions to extrinsic electron-centers (EC). Laser induced transmission changes extend from the UV up to 600 nm in the visible. The dopants are easily reduced to lower valences in metaphosphate glasses. Extrinsic hole centers (HC) replace intrinsic HC in samples containing the reduced transition metal ions. The strong transmission changes seen below 300 nm arise from intrinsic EC and extrinsic HC. The few remaining intrinsic HC (300–600 nm) recombine rapidly with EC or transform into more stable extrinsic HC. Borosilicate glasses show the formation of intrinsic boron oxygen hole center in the EPR spectra and of intrinsic HC and EC in the optical spectra. The d¹-ion Mo⁵⁺ is the only identified reduced dopant species in the borosilicate glasses. The band intensity of intrinsic EC in relation to intrinsic HC is correspondingly highest for the Mo-doped samples, in which extrinsic HC are generated.     

Spectral investigations on VO2+ ion doped in CaO–SrO–Na2O–B2O3 glass systems

Glasses of the (20 ? x)CaO–xSrO–(20 ? y)Na₂O–60B₂O₃ ? y (CSNB) system with (5 ≤ x ≤ 15) mol% and y = 0.1 mol% of V₂O₅ were characterized by X-ray diffraction (XRD), EPR (Electron Paramagnetic Resonance), Optical absorption Spectra and FT-IR (Fourier transform Infrared Spectroscopy) studies. EPR spectra of all the glass samples exhibit resonance signals characterstic of VO²⁺ ions. The values of spin-Hamiltonian parameters indicate that the VO²⁺ ions in CSNB glasses were present in octahedral sites with tetragonal compression and belong to C_4v symmetry. Spin-Hamiltonian parameters ‘g’ and ‘A’ were evaluated. The Optical band energy (E_opt) and Urbach energy (ΔE) were calculated from their ultra violet edges. By correlating EPR and Optical data the molecular orbital coefficients have been evaluated. IR spectra of these glasses were analyzed in order to identify the contribution of each component to the local structure that determines the physical properties of these glasses.     

X-ray absorption spectroscopy and high-energy XRD study of the local environment of copper in antibacterial copper-releasing degradable phosphate glasses

Phosphate-based glasses of the general formula Na₂O–CaO–P₂O₅ are degradable in an aqueous environment, and therefore can act as antibacterial materials through the inclusion of ions such as copper. In this study, CuO and Cu₂O were added to Na₂O–CaO–P₂O₅ glasses (1–20 mol% Cu) and X-ray absorption spectroscopy (XAS) and high-energy X-ray diffraction (HEXRD) used to probe the local environment of the copper ions. Copper K-edge X-ray absorption near-edge structure (XANES) spectra confirm the oxidation state of copper to be predominantly 2+ in all samples regardless of which copper oxide was used in the preparation. The XANES results suggest the structural environment of copper to be octahedral with respect to oxygen in all samples. The HEXRD results yield a Cu–O nearest-neighbour distance of 1.98 Å and associated coordination number of approximately six, both consistent with octahedral coordination. Analysis of the extended X-ray absorption fine structure (EXAFS) data also yields structural parameters consistent with copper in an octahedral environment. The HEXRD and EXAFS results reveal a Cu–P distance of 3.13 Å, which confirms that the copper ions are coordinated within the phosphate glass network and not phase-separated in domains of copper oxide.     

EPR and magnetic susceptibility studies of B2O3–Bi2O3–Gd2O3 glasses

Glasses of the xGd₂O₃ · (100 − x)[B₂O₃ · Bi₂O₃] system with 0.5 ⩽ x ⩽ 10 mol% were studied by electron paramagnetic resonance (EPR) and magnetic susceptibility measurements. Data obtained show that for low gadolinium oxide contents of the samples (x ⩽ 3 mol%) the Gd³⁺ ions are randomly distributed in the host glass matrix and are present as isolated and dipole–dipole coupled species. For higher gadolinium oxide contents of the samples (x > 3 mol%) the Gd³⁺ ions appear as both isolated and antiferromagnetically coupled species. The EPR spectra of the glasses reveal resonance sites with an unexpected high crystalline field in addition to the ‘U’ spectrum, typical for Gd³⁺ ions in disordered systems. This absorption line is due to Gd³⁺ ions that replace Bi³⁺ ions from the host glass matrix and could play the network unconventional former role in the studied glasses.     

Compositional effects on fluorescence lifetime of Dy3+ ions embedded in chalcogenide Ge–As–S glasses containing very small amount of Ga and CsBr

We have investigated the fluorescence lifetimes of Dy³⁺: 1.3 μm emission in the chalcogenide Ge–As–S glasses with different compositions but identically containing 0.5 mol% Ga and 0.5 mol% CsBr. The measured lifetimes turn out to be sensitive not only to the concentrations of Ga and CsBr but also to compositional variations in the Ge–As–S host glasses. The lifetime is enhanced conspicuously in glass of the S-sufficient compositions, relative to the stoichiometric GeS₂–As₂S₃ composition, while this effect is not significant in the S-exact and S-deficient compositions. We employ Ga K-edge EXAFS analysis to support that the local structural environments of Ga in the modified chalcogenide glasses are closely correlated with the lifetime enhancement effect.     

Optical properties and valence state of Sm ions in aluminoborosilicate glass under β-irradiation

Sm-doped borosilicate glasses exposed to β-irradiation with doses from 8 × 10⁵ up to 4 × 10⁹ Gy have been studied by luminescence, Raman and electron paramagnetic resonance (EPR) spectroscopies. The luminescence spectra for pristine and irradiated glasses reveal that the β-irradiation process affects valence state of samarium ions. Intense emission at 684 and 727 nm excited by Ar+ laser (514.5 nm) due to the transition of Sm²⁺ ion was observed after irradiation. Relative proportion of Sm²⁺ ions estimated as a function of both Sm₂O₃ content and irradiation dose has the tendency to increase with increasing irradiation dose. In contrast, the EPR spectra of the studied samples reveal a decrease of the defect content, which are mostly hole defects, produced during irradiation, as a function of Sm₂O₃ content. Finally, the addition of Sm₂O₃ leads to a decrease of the Si–O–Si bending vibration modes shift and polymerisation changes under irradiation.     

Alkaline earth zinc borate glasses doped with Cu2+ ions studied by EPR,optical and IR techniques

Copper ions incorporated into alkaline earth zinc borate glasses 10RO + 30ZnO + 60B₂O₃ (R = Mg, Ca and Sr) and 10SrO + (30 ? x)ZnO + 60B₂O₃ + xCuO (x = 0, 0.1, 0.3, 0.5, and 0.7 wt.%) were characterized by electron paramagnetic resonance (EPR), optical absorption and FTIR techniques. The EPR spectra of all the glass samples exhibit resonance signals characteristic of Cu²⁺ ions. The values of spin-Hamiltonian parameters indicate that the Cu²⁺ ions in alkaline earth zinc borate glasses were present in octahedral sites with tetragonal distortion. The spin concentration (N) participating in resonance was calculated as a function of temperature for strontium zinc borate (SrZB) glass sample containing 0.7 wt.% of Cu²⁺ ions and the activation energy was calculated. From the EPR data, the paramagnetic susceptibility (χ) was calculated at different temperatures and the Curie constant was evaluated from the 1/χ-T graph. The optical absorption spectra of these samples show only one absorption band. The optical band gap energies (E_g) and Urbach energy (ΔE) are calculated from their ultraviolet edges. The FTIR studies show different stretching and bending vibrations of alkaline earth zinc borate glasses.     

Glasses in the SbPO4–WO3 system

Glasses in the binary system (100 − x)SbPO₄–xWO₃ (20 ⩽ x ⩽ 60, x in mol%) have been prepared and characterized. Differential thermal analysis (DTA) shows that the glass transition temperature, T_g, increases from 412 °C, for samples containing 20 mol% of WO₃, to 481 °C observed for glass containing 60 mol%. Sample containing 40 mol% in WO₃ were observed to be the most stable against devitrification. The structural organization of the glasses has been studied by using Fourier transform infra-red (FTIR), Raman, ³¹P Magic angle spinning (MAS) and spin echo nuclear magnetic resonance (NMR) spectroscopies. Results suggest two distinct networks comprising the glass structure, one with high SbPO₄ content and the other characteristic of the highest WO₃ content samples. The glasses present photochromic properties. Colour changes are observed for samples after exposure to ultraviolet or visible laser light. XANES, at L₁ absorption edge of tungsten, suggests partial reduction from W⁶⁺ to W⁵⁺ species during the laser irradiation. The photochromic effects and the colour changes, promoted by laser excitation, are reversible and easily removed by heat for during 1 h at 150 °C. Subsequent ‘write/erase’ cycles can be done without degradation of the glasses.     

Iron environment in calcium-soda-phosphate glasses and vitroceramics

The structure of calcium-soda-phosphate glasses and vitroceramics with relatively high iron content was investigated by X-ray diffraction, electron paramagnetic resonance (EPR) and Mössbauer spectroscopy. The X-ray diffraction analysis proves the vitreous state of the as prepared samples and the development of crystalline phases in the annealed samples. The ferric ions disposed in sites that give rise to the absorption line with g_ef ≈ 4.3 in the EPR spectra of vitreous samples are not more evidenced in the spectra of the annealed samples, from which only of a symmetric and narrowed line with g_ef ≈ 2 is recorded. The room temperature ⁵⁷Fe Mössbauer spectra both of glass and vitroceramic samples consist of two quadrupole doublets characteristic for octahedral sites of Fe²⁺ and Fe³⁺ ions. The isomer shift for glass samples decreases and for vitroceramic samples increases with the iron oxide content.     

Lightweight Ti–Zr–Be–Al bulk metallic glasses with improved glass-forming ability and compressive plasticity

A series of lightweight Ti–Zr–Be–Al bulk metallic glasses (BMGs) have been developed through the addition of Al to Ti–Zr–Be ternary glassy alloy. By replacing Be with Al, the critical size of the glassy rod has been increased from 5 mm for Ti₄₁Zr₂₅Be₃₄ alloy to 7 mm for Ti₄₁Zr₂₅Be₂₉Al₅ alloy, while the yield strength of Ti₄₁Zr₂₅Be_34 ? xAl_x (x = 2–10) has been greatly enhanced, resulting in a significant increase of the specific strength which is defined as yield strength/density. Among these newly developed Ti–Zr–Be–Al BMGs, Ti₄₁Zr₂₅Be₂₆Al₈ glassy alloy exhibits a high specific strength of 4.33 × 10⁵ Nm/kg and a very large compressive plastic strain of 47.0%, which are much larger than those (3.69 × 10⁵ Nm/kg and 2.9%, respectively) for Ti₄₁Zr₂₅Be₃₄ glassy alloy. The present results show that Al is an effective alloying element for improving the glass-forming ability (GFA) and mechanical properties of Ti-Zr-Be glassy alloy.     

Glass formation of Ti–Ni–Sn ternary alloys correlated with TiNi–Ti3Sn pseudo binary eutectics

Glass-forming ability (GFA) of Ti–Ni–Sn ternary alloys was investigated. Applying recent models based on atomic size ratio and efficient packing, the composition favoring the glass formation is predicted. Our experiments indicate that the optimized glass-forming composition is located at Ti₅₆Ni₃₈Sn₆, with the critical thickness of complete glass formation approaching 100 μm for the melt-spun ribbons. The Ti₅₆Ni₃₈Sn₆ metallic glass exhibits a sizable supercooled liquid region (ΔT_x) of about 35 K and a reduced glass transition temperature (T_rg) of 0.52. We demonstrate that the glass formation of the Ti₅₆Ni₃₈Sn₆ alloy correlates with the (L → TiNi + Ti₃Sn) pseudo binary eutectic reaction in Ti–Ni–Sn ternary system, which has an invariant temperature and composition at ～1370 K and ～Ti₅₈Ni₃₄Sn₈, respectively. With respect to Sn-free Ti–Ni binary alloys, the GFA is enhanced for the Ti–Ni–Sn ternary alloys, but the improvement is limited possibly due to changes in the crystalline phases competing with glass formation.     

Silver valence and local environments in borosilicate and calcium aluminoborate waste glasses as determined from X-ray absorption spectroscopy

Silver K-edge X-ray absorption near edge structure (XANES) and extended X-ray absorption fine structure (EXAFS) data were collected and analyzed to characterize silver (Ag) environments in borosilicate and Ca-aluminoborate glass formulations developed as potential candidates for the immobilization of certain nuclear wastes. Silver is found in some nuclear waste streams and must be encapsulated in glass during waste vitrification processes. A related concern deals with phase separation within these glasses and whether colloidal silver would be present in the glass melt, which could present processing issues, or in the waste glass product. Characterization of the silver environments provides useful information for optimizing the silver incorporation ability of such glasses. Data were also gathered on four crystalline standards: Ag-foil, Ag₂O, argentojarosite (AgFe₃(SO₄)₂(OH)₆), and AgO. XANES data indicate Ag⁺ as the dominant species in the glasses. XANES and EXAFS data show that the average Ag environment in the Ca-aluminoborate glass is different compared with those in the two borosilicate glasses investigated. EXAFS analyses show that Ag in the borosilicate glasses is coordinated by two oxygens in a similar environment to that in crystalline Ag₂O, except that the associated Ag–O distances are approximately 0.10 Å longer in the glass. Silver in the Ca-aluminoborate glass may be within one highly disordered site, or possibly, several different sites, where the average Ag–O distance, coordination number, and Debye–Waller factor are larger than those determined for the borosilicate glasses. Despite their relatively high silver contents, there is no evidence from XANES or EXAFS of colloidal silver in the glasses investigated.     

Bismuth-activated luminescent materials for broadband optical amplifier in WDM system

New broadband near infrared luminescence covering the whole work windows (1260–1625 nm) of the current wavelength division multiplexing (WDM) system was found from bismuth-activated M₂O–Al₂O₃–SiO₂ (M = Li, Na) and Li₂O–Ta₂O₅–SiO₂ glasses at room temperature in the case of 808 nm-laser excitation. But the near infrared luminescence mechanism of the bismuth-activated glasses is not well understood up to now. The figure-of-merits of bandwidth and gain of the glasses are better than those of Er³⁺-doped silicate glasses and Ti³⁺ doped sapphire, implying they are the promising gain-medium candidates for the broadband amplifiers and the widely tunable laser sources.     

An X-ray absorption spectroscopy study of the local environment of iron in degradable iron–phosphate glasses

Degradable iron–phosphate glasses with the composition of (CaO)_0.30–(Na₂O)_0.20?x–(Fe₂O₃)_x–(P₂O₅)_0.50, x = 0.01–0.05, were studied by Fe K-edge X-ray absorption spectroscopy (both near-edge, XANES, and extended, EXAFS). The addition of up to 5 mol% iron oxide is known to enhance the durability of the phosphate glass while maintaining biocompatibility. The results from the two techniques used here both show that iron is in the Fe(III) oxidation state and has octahedral coordination. This suggests that Fe is cross-linking the phosphate chains and therefore strengthening the network structure, resulting improved chemical durability of the glasses.     

Luminescent properties and applications of Tb3+ doped silicate glasses with industrial scales

Tb³⁺ doped X-ray conversion glassy screen with an industrial scale (50 mm × 50 mm × 12 mm) was successfully fabricated, and its luminescent properties and applications in CCD imaging system were investigated. Results showed that Tb³⁺ doped silicate glasses mainly emit weak blue (400–460 nm) and strong green (480–570 nm) fluorescence. With the increase of Tb³⁺ ion concentration, the intensity of green emission increases, but that of blue emission decreases. Gd³⁺ ions can sensitize the luminescence of Tb³⁺ ions among silicate glasses. With the increase of CeO₂ concentration, the luminescent intensity of Tb³⁺ doped silicate glasses at 550 nm quickly decreases. However, the irradiation resistance of Tb³⁺ doped silicate glasses can be effectively improved by CeO₂ addition. The imaging quality of the luminescent glass screen is more excellent than that of Gd₂O₂S polycrystalline screens.     

Electrical conductivity of silicate glasses with tetravalent cations substituting Si

The effects of substituting Si by M^4 + cations in soda-lime silica glasses were analyzed by impedance spectroscopy in the frequency range of 1 Hz–1 MHz. The glass composition was (mol%) 22Na₂O·8CaO·65SiO₂·5MO₂, M = Si, Ti, Ge, Zr, Sn, and Ce. Although the Na⁺ concentration in the glasses is constant, the Zr-containing glass exhibits the highest dc conductivity and the lowest activation energy, while the Ce-containing glass exhibits the lowest conductivity. The activation energies obtained experimentally agree with those obtained by a theoretical equation proposed by Anderson and Stuart. The differences in electrical conductivity presented by the several M-containing glasses are attributed to the effect that the M^4 + ion has on the mobility of the diffusing Na⁺ ion.     

High-iron ferric glass

Iron commonly exists as an equilibrium mixture of ferrous ions, Fe²⁺, and ferric ions, Fe³⁺, in glass. Fe³⁺ is a strong absorber of ultraviolet light and imparts a yellow color to glass, while Fe²⁺ has an absorption band in the near-infrared, resulting in a blue coloration. This study synthesized soda-lime-silicate glasses with high iron contents (1–3 wt%) in which virtually all the iron was fully oxidized to the ferric redox state, resulting in a UV-absorbing, yellow glass. The effectiveness of three common oxidizing agents (cerium, manganese, and antimony) to react with Fe²⁺ in these high-iron glasses was determined as a function of the processing temperature (1200–1400 °C). Cerium was the best oxidizer at the highest iron contents (3 wt%), while manganese was more effective at the lowest iron contents (1 wt%).     

2 μm spectroscopic investigation of Tm3+-doped tellurite glass fiber

TmF₃ doped TeO₂–ZnO–La₂O₃ (TZL) glasses and fibers have been prepared by the conventional melt-quenching and suction casting methods, respectively. 2 μm emission properties and energy transfer mechanisms of the TZL glasses and fibers have been analyzed and discussed. The oscillator strength, Judd–Ofelt parameters, radiative transition probability and radiative lifetime of Tm³⁺ have been calculated based on the absorption spectra and Judd–Ofelt theory. The maximum emission cross-section of Tm³⁺ is 6.9 × 10^?21 cm² near 2 μm. Emission spectra have been obtained from both TZL fibers and bulk glass when excited with a 794 nm pump. The results of 2 μm emission spectra indicate that the line width of Tm³⁺ measured in fibers is narrower than that in the bulk glass sample. The peak position of the emission spectra shifts to longer wavelength with increment of the fiber length.     

Visible to near-infrared down-conversion luminescence in Tb3 + and Yb3 + co-doped lithium–lanthanum–aluminosilicate oxyfluoride glass and glass-ceramics

Tb^3 + and Yb^3 + co-doped oxyfluoride glasses were fabricated in a lithium–lanthanum–aluminosilicate matrix (LLAS) by a melt-quench technique. Glass-ceramics were obtained by appropriate heat treatment of the as-prepared glasses. Visible to near-infrared down-conversion luminescence was studied for glass and glass-ceramic samples with different Yb^3 + concentrations. It has been found that the luminescence intensity at 940–1020 nm from Yb^3 + ions increases while the emission lifetime of Tb^3 + ions decreases in the glass-ceramic compared to that in the as-prepared glass, which indicates that the energy transfer efficiency increases in the glass-ceramics compared to that in the as-prepared glass. The down-conversion luminescence also increased for increasing Yb^3 + concentration from 1 mol% to 2 mol%, but decreased for the sample with a high Yb^3 + co-doping concentration of 8 mol%, which is attributed to the concentration quenching.