Structure and crystallization behavior of mixed potassium-lithium niobiosilicate glasses

Potassium-lithium niobiosilicate (KLiNS) glasses with a composition of (27 ? x)K₂O · xLi₂O · 27Nb₂O₅ · 46SiO₂ (x = 0, 3, 12 and 20) have been synthesized by a melt-quenching method. The glass structure and devitrification behavior have been studied by Raman spectroscopy, DTA, and XRD. By increasing the lithium content, less distorted niobium octahedra increase, indicating a niobium clustering. This change strongly affects the crystallization behavior. In the glasses x = 0 and x = 3, just above T_g, only nanocrystals of an unidentified phase are formed, while for x = 12 and x = 20 potassium lithium niobate (KLN) solid solutions with tetragonal tungsten–bronze structure crystallize by bulk nucleation. In these glasses, LiNbO₃ crystallizes at higher temperature by surface nuclei. Ultimately, it is possible to produce nanostructured glasses based on KLN nanocrystals, by partial replacement of K by Li.     

Electrooptical Kerr phenomenon and Raman spectroscopy of one lithium–niobium–silicate glass-forming system

Raman spectra and electrooptical Kerr coefficients of glasses belonging to one lithium–niobate–silicate glass-forming system xNb₂O₅ · (66 ? x)SiO₂ · 19Li₂O · 11K₂O · 2B₂O₃ · 2CdO are studied. It has been found that these glasses demonstrate a record value of electrooptical Kerr coefficient; the glass with x = 35 showed electrooptical Kerr coefficient equal to 266 × 10^?16 m/V². Using Raman spectroscopy combined with the concept of Constant Stoichiometric Groupings, a correlation of electrooptical Kerr coefficients of these glasses with the content of Li₂O · Nb₂O₅ (or 2LiNbO₃) groupings has been demonstrated. The hypothesis that electrooptical Kerr sensitivity of glasses is related to the ordered regions with composition and symmetry corresponding to some of known electrooptical crystals has been verified. These regions, which the authors called ‘Crystal Motifs’, are identified with the groupings found in studying Raman spectra of the glasses.     

Effects of modifier additions on the thermal properties,chemical durability,oxidation state and structure of iron phosphate glasses

Modified iron phosphate glasses have been prepared with nominal molar compositions [(1?x)·(0.6P₂O₅–0.4Fe₂O₃)]·xR_ySO₄, where x = 0–0.5 in increments of 0.1 and R = Li, Na, K, Mg, Ca, Ba, or Pb and y = 1 or 2. In most cases the vast majority or all of the sulfate volatalizes and quarternary P₂O₅–Fe₂O₃–FeO–R_yO_z glasses or partially crystalline materials are formed. Here we have characterized the structure, thermal properties, chemical durability and redox state of these materials. Raman spectroscopy indicates that increasing modifier oxide additions result in depolymerization of the phosphate network such that the average value of i, the number of bridging oxygens per –(PO₄)– tetrahedron, and expressed as Qⁱ, decreases. Differences have been observed between the structural effects of different modifier types but these are secondary to the amount of modifier added. Alkali additions have little effect on density; slightly increasing T_g and T_d; increasing α and T_liq; and promoting bulk crystallization at temperatures of 600–700 °C. Additions of divalent cations increase density, α, T_g, T_d, T_liq and promote bulk crystallization at temperatures of 700–800 °C. Overall the addition of divalent cations has a less deleterious effect on glass stability than alkali additions. ⁵⁷Fe Mössbauer spectroscopy confirms that iron is present as Fe²⁺ and Fe³⁺ ions which primarily occupy distorted octahedral sites. This is consistent with accepted structural models for iron phosphate glasses. The iron redox ratio, Fe²⁺/ΣFe, has a value of 0.13–0.29 for the glasses studied. The base glass exhibits a very low aqueous leach rate when measured by Product Consistency Test B, a standard durability test for nuclear waste glasses. The addition of high quantities of alkali oxide (30–40 mol% R₂O) to the base glass increases leach rates, but only to levels comparable with those measured for a commercial soda-lime-silica glass and for a surrogate nuclear waste-loaded borosilicate glass. Divalent cation additions decrease aqueous leach rates and large additions (30–50 mol% RO) provide exceptionally low leach rates that are 2–3 orders of magnitude lower than have been measured for the surrogate waste-loaded borosilicate glass. The P₂O₅–Fe₂O₃–FeO–BaO glasses reported here show particular promise as they are ultra-durable, thermally stable, low-melting glasses with a large glass-forming compositional range.     

Molar volume,glass-transition temperature,and ionic conductivity of Na- and Rb-borate glasses in comparison with mixed Na–Rb borate glasses

Mass densities, molar volumes, glass-transition temperatures, and ionic conductivities are measured in series of YNa₂O · (1 − Y)B₂O₃ glasses, with Y = 0.00, 0.04, 0.08, 0.12, 0.16, 0.20, 0.25, 0.30 and YRb₂O · (1 − Y)B₂O₃ glasses, with Y = 0.00, 0.12, 0.16, 0.20, 0.25, 0.30. Measurements of the molar volumes indicate that the incorporation of rubidium ions leads to a considerable expansion of the network, which is not observed for sodium ions. The glass-transition temperature increases with increasing alkali content and reaches a maximum near Y = 0.25 for both glass systems. These trends are attributed to changes in the glass network. For each glass composition an Arrhenius-activated increase of the product of dc conductivity and temperature is observed. The activation enthalpy decreases with increasing number density of ions. A comparison between the binary sodium- and rubidium-borate glasses from this work, with the ternary sodium–rubidium borate glasses studied earlier in our laboratory, provides interesting insights in the influence of the glass structure on ionic transport processes and the mixed-alkali effect.     

An X-ray absorption spectroscopy study of the local environment of iron in degradable iron–phosphate glasses

Degradable iron–phosphate glasses with the composition of (CaO)_0.30–(Na₂O)_0.20?x–(Fe₂O₃)_x–(P₂O₅)_0.50, x = 0.01–0.05, were studied by Fe K-edge X-ray absorption spectroscopy (both near-edge, XANES, and extended, EXAFS). The addition of up to 5 mol% iron oxide is known to enhance the durability of the phosphate glass while maintaining biocompatibility. The results from the two techniques used here both show that iron is in the Fe(III) oxidation state and has octahedral coordination. This suggests that Fe is cross-linking the phosphate chains and therefore strengthening the network structure, resulting improved chemical durability of the glasses.     

IR absorption spectra of lithium and silver vanadium–tellurite based glasses

The aim of the present paper is to give structural information in order to set a correlation between the electrical conductivity behavior and structures of lithium and silver vanadium–tellurite based glasses. We report our structural studies and compare the effect of the nature of the metallic cation on glasses of the form XM₂O · (1 − X)V₂O₅ · 2TeO₂ (where 0 ⩽ X < 1 and M = Li or Ag). Fourier transform infra-red (FTIR) spectra were recorded for all compositions and complementary differential scanning calorimetry (DSC) measurements and X-ray diffraction (XRD) measurements were also carried out. This paper should be considered as complementary to a previous article reporting the conductive behavior of theses glasses. In the latter we reported the obtained results on electrical conductivity studies. The results confirm the existence of a transition from a typically electronic (polaronic) conductive regimen when the molar fraction (X) of M₂O is equal to 0, to an ionic conductive regimen when X tends to 1. The evidence for the independent migration path for both electrons and ions was put into evidence by studying the electrical conductivity behavior in a complementary system of the form X M₂O · (1 − X)[0.5V₂O₅–0.5MoO₃] · 2TeO₂. In this system vanadium was partially replaced by molybdenum which acts as a ‘diluting’ agent of the active centers involved in the electronic transport.     

Ion conducting phosphate glassy materials

Fast ion conducting (FIC) phosphate glasses have become very important due to a wide range of applications in solid-state devices. We present an overview on silver based fast ion conducting phosphate glasses. Silver phosphate glasses containing chlorides of some metals viz; Li, Na, Mg, Pb and Cu [Ag₂O–P₂O₅–xMCl_y, where x = 0, 1, 5, 10 and 15 wt% and y = 1 when M = Li or Na and y = 2 when M = Mg, Pb or Cu] have been synthesized by melt quenching technique. Studies on these glassy materials characterized by X-ray diffraction, Fourier transform infrared spectroscopy, differential scanning calorimetric techniques and ion transport measurements are presented. The FT-IR studies support the formation of P–O–M linkages. The values of glass transition temperature (T_g) of the glassy materials containing lithium or sodium chloride have been found to decrease with increasing dopant concentrations indicating expansion of the glassy network. On the other hand, the T_g values increase with increasing magnesium, lead or copper chloride concentrations in silver phosphate glasses. This indicates an increase in cross–link density and enhanced chemical durability of these glassy materials. Ion transport studies suggest that the values of electrical conductivities of the metal chloride doped glassy materials are higher than those of the undoped ones and, at a particular dopant concentration, the following trend is observed.σ (–LiCl) ≥ σ (–NaCl) > σ (–MgCl₂) > σ (–PbCl₂) > σ (–CuCl₂)These results are supported by the experimental results of FT-IR spectral and thermal studies.     

Structure and properties of potassium niobato-borophosphate glasses

Bulk glasses of the series (1 ? x)[0.5K₂O–0.1B₂O₃–0.4P₂O₅]–xNb₂O₅ with x = 0–45.7 mol% Nb₂O₅ were prepared by slow cooling in air and investigated by Raman, ³¹P, and ¹¹B MAS NMR spectroscopy. The incorporation of Nb₂O₅ into the parent borophosphate glass results in a substantial increase in the glass transition temperature and chemical durability of glasses. Raman spectra showed that Nb atoms form distorted NbO₆ octahedra, which are isolated at low Nb₂O₅ content, whereas at higher Nb₂O₅ content they form clusters. ¹¹B NMR spectra of the glasses revealed the interaction between Nb₂O₅ and BO₄ tetrahedral units, which results in a partial transformation of tetrahedral BO₄ units to trigonal BO₃ units and the formation of mixed B(OP)_4?n(ONb)_n units.     

Structure and properties of the 70Li2S · (30 − x)P2S5 · xP2O5 oxysulfide glasses and glass–ceramics

The 70Li₂S · (30 ? x)P₂S₅ · xP₂O₅ (mol%) oxysulfide glasses were prepared by the melt quenching method. The glasses were prepared in the composition range 0 ≦ x ≦ 10. The glass–ceramics were prepared by heating the glasses over crystallization temperatures. The PO_nS_3?n (n = 1–3) oxysulfide units were produced in the glasses and glass–ceramics by partial substituting P₂O₅ for P₂S₅. In particular, the P₂OS₆^4? unit would be produced by substituting a small amount of P₂O₅ for P₂S₅. The oxygen atoms were incorporated into the Li₇P₃S₁₁ crystal structure because the diffraction peaks of the oxysulfide glass–ceramic shifted to the higher angle side. The glass–ceramic with 3 mol% of P₂O₅ exhibited the highest conductivity of 3.0 × 10^?3 S cm^?1 and the lowest activation energy for conduction of 16 kJ mol^?1. The P₂OS₆^4? dimer units in the oxygen-incorporated Li₇P₃S₁₁ crystal would improve conductive behavior of the Li₂S–P₂S₅ glass–ceramics.     

Thermal properties and glass formation in the SiO2–B2O3–Bi2O3–ZnO quaternary system

Lead-free glasses in the SiO₂–B₂O₃–Bi₂O₃–ZnO quaternary system were studied. The glass formation region, as determined by XRD patterns of bulk samples, was limited to glasses having more than 40 mol% of the glass-forming oxides SiO₂ and B₂O₃. Crystalline phases of Zn₂SiO₄ (willemite) were detected in compositions of 30SiO₂ · 10B₂O₃ · 20Bi₂O₃ · 40ZnO and 20SiO₂ · 10B₂O₃ · 25Bi₂O₃ · 45ZnO. Glass transition temperatures (T_g), dilatometric softening points (T_d) and linear coefficients of expansion in the temperatures range of 25–300 °C (α_25–300) were measured for subsystems along the B₂O₃ join of 10, 20 and 30 mol%. For these subsystems, T_g ranged from 411 to 522 °C, and T_d ranged from 453 to 563 °C, both decreasing with increasing Bi₂O₃ content. The measured α_25–300 ranged from 53 to 95 × 10⁻⁷ °C⁻¹, with values increasing with increasing Bi₂O₃ content. The ZnO content had the opposite effect to the Bi₂O₃ content. It appears that Bi³⁺ acts as a glass-modifier in this quaternary system.     

Spectral studies of Sm3+ and Dy3+ doped lithium cesium mixed alkali borate glasses

The effect of host glass composition on the optical absorption and fluorescence spectra of Sm³⁺ and Dy³⁺ has been studied in mixed alkali borate glasses of the type 67B₂O₃ · xLi₂O · (32 − x)Cs₂O (x = 8, 12, 16, 20 and 24). The Judd–Ofelt intensity parameters (Ω₂, Ω₄ and Ω₆) are calculated. The radiative transition probabilities (A), radiative lifetimes (τ_R), branching ratios (β) and integrated absorption cross-sections (Σ) are computed for certain excited states of Sm³⁺ and Dy³⁺ ions for different x values in the glass matrix. Stimulated emission cross-sections (σ_p) are obtained for certain emission transitions of two ions in these mixed alkali borate glasses. These parameters are compared for different x values in the glass matrix. Variation of these parameters with x in the glass matrix has been studied.     

Neutron diffraction study of sodium borosilicate waste glasses containing uranium

The effect of uranium oxide on the structure of sodium borosilicate host glasses has been studied by neutron diffraction. The samples were prepared by quenching the melted mixtures of composition 70 wt% [(65 − x)SiO₂ · xB₂O₃ · 25Na₂O · 5BaO · 5ZrO₂] + 30 wt% UO₃ with x = 5, 10 and 15 mol%. It was found, that the U-loaded glasses posses good glass and hydrolytic stability. An enhanced probability for inter-mediate atomic correlations at around 4.8 Å has been established. The RMC simulation of the neutron diffraction data is consistent with a model where the uranium ions are incorporated into interstitial voids in the essentially unmodified network structure of the starting host glass. The U–O atomic pair correlation functions show a sharp peak at around 1.7 Å, and several farther distinct peaks are at 2.8, 3.6 and 4.1 Å. The uranium ions are coordinated by six oxygen atoms in the 1.6–3.4 Å interval.     

Thermal conductivity of mixed alkali silicate glasses at low temperature

Thermal conductivity of glass is one of the fundamental properties of it. However, that has not been studied enough. That of only less than 20 compositions has been measured below the room temperature. In this study, we measured the thermal conductivity of xNa₂O · (100 ? x)SiO₂ and (33 ? y)Na₂O · yCs₂O · 67SiO₂ glasses by a transient heating method in the temperature range from about 150 K to room temperature. The conductivity of xNa₂O · (100 ? x)SiO₂ is found to decrease with the increase in alkali content. The dominant factor of this behavior is the decrease in phonon mean free path, which is due to the increase of non-bridge oxygen. Thermal conductivity of (33 ? y)Cs₂O · yNa₂O · 67SiO₂ is decreased with the increase in Cs₂O/(Na₂O + Cs₂O) ratio. The dominant factor of this behavior is the decrease of sound velocity. However, composition dependence of the phonon mean free path also affects the thermal conductivity. Phonon mean free path of 33Cs₂O · 67SiO₂ glass is longer than that of 33Na₂O · 67SiO₂ glass, and should be related to the change in distribution of structural unit in glass. In addition, phonon mean free path of mixed alkali glasses are shorter than that of single alkali glasses.     

Polarons in boron doped iron phosphate glasses

The electrical conductivity and dielectric properties of xB₂O₃–(40 ? x)Fe₂O₃–60P₂O₅ (x = 6–20, mol%) glasses were investigated in the frequency range from 0.01 Hz to 1 MHz and the temperature range from 303 K to 523 K. At temperatures below 523 K an ac conductivity and the dielectric constant follow the universal dielectric response (UDR), being typical for hopping or tunneling of localized charge carriers. A detailed analysis of the temperature dependence of the UDR parameter s in terms of the theoretical model for tunneling of small polarons revealed that below 523 K this mechanism governs the charge transport in these glasses. The comparison of the values of characteristic coefficients W_∞ and α determined by two different methods confirms the polaronic behavior of boron doped iron phosphate glasses.     

Synthesis and structure–property relations in xCuO–(1 − x)Bi2O3 (0.5 ⩽ x ⩽ 0.9) (C1–C5: x = 0.5, 0.6, 0.7, 0.8, 0.9) glasses

Synthesis of the xCuO–(1 ? x)Bi₂O₃ (0.5 ? x ? 0.9) (C1–C5: x = 0.5, 0.6, 0.7, 0.8, 0.9) glasses was done via nitrate–citrate gel route. Glassy phase is ascertained by XRD studies. Magnetic susceptibility results in the range 4.2–400 K show weak paramagnetic nature with exchange integrals ～0.024–0.13 eV in the glasses. The electron paramagnetic resonance (EPR) in the range 4.2–363 K shows g ≈ 2.0 and the trend of the g-matrix elements g_|| > g_⊥ > g_e for the glasses C1–C5 at 4.2 K are due to the Cu²⁺ (3d⁹) paramagnetic site in the glasses which is in a tetragonally elongated octahedron [O_1/2–CuO_4/2–O_1/2] having D_4h symmetry. IR spectroscopic results show the presence of octahedron [BiO_6/2]^3? and [CuO_6/2]^4? units and pyramidal [BiO_2/2O]^? unit in the glasses.     

Network structure of multi-component sodium borosilicate glasses by neutron diffraction

Neutron diffraction structure study has been performed on multi-component sodium borosilicate based waste glasses with the composition of (65 − x)SiO_2. · xB₂O₃ · 25Na₂O · 5BaO · 5ZrO₂, x = 5–15 mol%. The maximum momentum transfer of the experimental structure factor was 30 Å⁻¹, which made available to determine the distribution function with high r-space resolution. Reverse Monte Carlo modelling was applied to calculate several partial atomic pair correlation functions, nearest neighbor distances and coordination numbers have been revealed. The characteristic features of Si–O and Si–Si distributions are similar for all glassy samples, suggesting that the Si–O network consisting of tetrahedral SiO₄ units is highly stable even in the multi-component glasses. The B–O correlations proved to be fairly complex, two distinct first neighbor distances are present at 1.40 Å and 1.60 Å, the latter equals the Si–O distance. Coordination number distribution analyzes has revealed 3 and four-coordinated boron atoms. The O–O distribution suggests a network configuration consisting of boron rich and silicon rich regions. Our findings are consistent with a structure model where the boron rich network contains mostly trigonal BO₃ units, and the silicon rich network is formed by a mixed continuous network of ^[4]Si–O–Si^[4] with several different ^[4]B–O–Si^[4] and ^[3]B–O–Si^[4] linkages.     

The effect of fluoride on the Fe2+/Fe3+-redox equilibrium in glass melts in the system Na2O/NaF/CaO/Al2O3/SiO2

Liquids with the base compositions (16 − x/2)Na₂O · xNaF · 10CaO · 74SiO₂ (x = 0, 1, 3, and 4) and (10 − x/2) · Na₂O · xNaF · 10CaO · yAl₂O₃ · (80 − y)SiO₂ (x = 0, 1, 3, 5 and y = 5 and 15) doped with 0.25 mol% Fe₂O₃ were studied by means of square-wave voltammetry in the temperature range from 1000 to 1500 °C. With increasing temperature, the redox equilibria were shifted to the reduced state. Also while increasing the alumina concentration, the Fe²⁺/Fe³⁺-redox equilibrium is shifted to the reduced state. In the soda-lime–silica melt the addition of fluoride shifts the equilibrium to the oxidized state, while in the aluminosilicate melts with 15 mol% Al₂O₃, the equilibrium is shifted to the reduced state. In the aluminosilicate melts with 5 mol% Al₂O₃, the equilibrium was not affected by the fluoride concentration. This is explained by the structure of the respective glass compositions.     

Catalysis and proton-conduction of novel phosphate glasses

The performance of phosphate glasses as a catalyst for water decomposition and a proton conductor was investigated. Glasses with a composition of 30Na₂O–10BaO–30P₂O₅–(30?x)WO₃–xNb₂O₅ (5 < x < 25) decompose water vapor and generate hydrogen at 500 °C. The best decomposition performance was observed on a specimen with the Nb₂O₅ composition of x = 15. A part of hydrogen produced on the glass surface changes to protons by reducing W⁶⁺ ions and penetrates into the glass. The electron is the dominant charge carrier in the electric conduction of W-rich glasses, whereas proton conduction is predominant in Nb-rich glasses in hydrogen atmosphere. A Raman scattering experiment revealed that Nb contributes to depolymerize the –P–O–P– chains in the phosphate glass producing non-bridging oxygen. A possible model was proposed for the water decomposition and proton conduction processes.     

Effect of mixed transition-metal ions in glasses. Part III: The P2O5–V2O5–MnO system

Electrical and optical properties of phosphate glasses containing vanadium and manganese ions in the xP₂O₅–[(100 − x)(V₂O₅ + MnO)] (PVM) system have been investigated. This is the last article of a III-part series devoted to the electronic properties of phosphate glasses containing a mixture of transition ions. The first article was devoted to the electrical conductivity of glasses having the general composition: xP₂O₅–[(100 − x)(V₂O₅ + Fe₂O₃)] (PVF). Competitive transport of small polarons on V and Fe ion sites was found to contribute to a mixed transition-ion effect (MTE) in PVF glasses. Several features of MTE were found to be similar to the well known mixed alkali effect, observed in glasses containing two alkali ions. In the second article, optical absorption and electronic conduction of xP₂O₅–[(100 − x)(Fe₂O₃ + MnO)] (PFM) glasses were reported. In the absence of competitive transport between the two transition ions (since Mn ions were determined not to contribute to dc conduction), MTE was not observed. The most important feature of PFM glasses was a sharp increase in resistivity at a critical concentration of iron ions, similar to ‘metal–insulator transition’ (MIT). In the present article, we report a resistivity transition in PVM glasses which is similar to that exhibited by the glasses of the PFM series. While Fe ions contributed the carriers in the PFM glasses, V ions serve the same purpose in the PVM compositions. As the concentration of vanadium ions, n_V, is decreased in the composition range 0.82 > n_V > 0.40, resistivity (ρ) increases marginally. For glasses with 0.2 < n_V < 0.40, resistivity and the activation energy for dc conduction (W) increase sharply with decreasing n_V, marking the incidence of an MIT-type transition. As in the PFM glasses, the observation of MIT coincides with the transformation of small polarons to small bipolarons, which is confirmed by the shifting of the small polaron optical absorption band to higher energies with decreasing V concentration.     

The effect of copper ions addition on structural and optical properties of zinc borate glasses

Glasses in the ternary system xCuO?(100 ? x)[55B₂O₃·45ZnO] (0 ≤ x ≤ 20 mol%) have been prepared by melting at 1200 °C and rapidly cooling at room temperature. The effect of copper ions addition in 55B₂O₃·45ZnO glass matrix together with the matrix effect on paramagentic behavior has been investigated using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, differential thermal analysis (DTA), electron paramagnetic resonance (EPR), ultraviolet–visible (UV–VIS) spectroscopy and density measurements. The increase of the number of non-bridging oxygen (NBO) atoms as a function of CuO content in these glasses leads to the decrease of glass polymerization which reduces the stability of the glasses and favors the association of copper ions in clusters. This leads to the major changes of structural and optical properties of the studied glasses as can be seen from the data obtained by FTIR and EPR spectroscopies.