Equilibrium and kinetics studies on adsorption of Cu(II) from aqueous solutions onto a graft copolymer of cross-linked starch/acrylonitrile (CLSAGCP)

A synthetic graft copolymer of cross-linked starch/acrylonitrile was used as an adsorbent for the removal of Cu(II) ions from an aqueous solution of copper nitrate hexahydrate Cu(NO₃)₂ · 6H₂O at different temperatures and fixed pH. The amount adsorbed increased with increasing concentration of Cu(II) ions and decreasing temperature. The length of time taken to reach equilibrium of the adsorption of Cu(II) ions was the same at all temperatures tested. Kinetics studies showed that the adsorption process obeyed first-order reversible kinetics and the adsorption isotherms followed the Freundlich model. Furthermore, the thermodynamic parameters, i.e. standard free energy (ΔG^∘), standard enthalpy (ΔH^∘), and standard entropy (ΔS^∘), of the adsorption process were calculated and the results are discussed in detail.     

Kinetics,isotherm and thermodynamics for Cr(III) and Cr(VI) adsorption from aqueous solutions by crystalline hydrous titanium oxide

The synthetic crystalline hydrous titanium(IV) oxide (CHTO), an anatase variety and thermally stable up to 300 °C, has been used for adsorption of Cr(III) and Cr(VI) from the aqueous solutions, the optimum pH-values of which are 5.0 and 1.5, respectively. The kinetic data correspond very well to the pseudo-second order equation. The rates of adsorption are controlled by the film (boundary layer) diffusion, and increase with increasing temperature. The equilibrium data describe very well the Langmuir, Redlich–Peterson, and Toth isotherms. The monolayer adsorption capacities are high, and increased with increasing temperature. The evaluated ΔG^° (kJ · mol^?1) and ΔH^° (kJ · mol^?1) indicate the spontaneous and endothermic nature of the reactions. The adsorptions occur with increase in entropy (ΔS^° = positive), and the mean free energy (E_DR) values obtained by analysis of equilibrium data with Dubinin–Radushkevick equation indicate the ion-exchange mechanism for Cr(III) and Cr(VI)-adsorptions.     

Thermodynamic analysis of sorption isotherms of chromium(VI) anionic species on reed biomass

A new sorbent material for removing Cr(VI) anionic species from aqueous solutions has been investigated. Adsorption equilibrium and thermodynamics of Cr(VI) anionic species onto reed biomass were studied at different initial concentrations, sorbent concentrations, pH levels, temperatures, and ionic strength. Equilibrium isotherm was analyzed by Langmuir model. The experimental sorption data fit the model very well. The maximum sorption capacity of Cr(VI) onto reed biomass was found to be 33 mg · g^?1. It was noted that the Cr(VI) adsorption by reed biomass decreased with increase in pH. An increase in temperature resulted in a higher Cr(VI) loading per unit weight of the adsorbent. Removal of Cr(VI) by reed biomass seems to be mainly by chemisorption. The change in entropy (ΔS^°) and heat of adsorption (ΔH^°) for Cr(VI) adsorption on reed biomass were estimated as 2205 kJ · kg^?1 · K^?1 and 822 kJ · kg^?1, respectively. The values of isosteric heat of adsorption varied with the surface loading of Cr(VI).     

Thermodynamics of the Cu(II) adsorption on thin vanillin-modified chitosan membranes

In this work, low-density vanillin-modified thin chitosan membranes were synthesized and characterized. The membranes were utilized as adsorbent for the removal of Cu(II) from aqueous solutions. The experimental data obtained in batch experiments at different temperatures were fitted to the Langmuir and Freundlich isotherms to obtain the characteristic parameters of each model. The adsorption equilibrium data fitted well with the Langmuir model (average R² > 0.99). Interactions thermodynamic parameters (Δ_intH, Δ_intG, and Δ_intS), as well as the interaction thermal effects (Q_int) were determined from T = (298 to 333) K. The thermodynamic parameters, the Dubinin–Radushkevick equation and the comparative values of Δ_intH for some Cu(II)–adsorbent interactions suggested that the adsorption of Cu(II) ions to vanillin-chitosan membranes show average results for both the diffusional (endothermic) and chemical bonding (exothermic) processes in relation to the temperature range studied.     

The removal of uranium (VI) from aqueous solutions onto natural sepiolite

The adsorption of uranium (VI) from aqueous solutions onto natural sepiolite has been studied using a batch adsorber. The parameters that affect the uranium (VI) sorption, such as contact time, solution pH, initial uranium(VI) concentration, and temperature, have been investigated and optimized conditions determined. Equilibrium isotherm studies were used to evaluate the maximum sorption capacity of sepiolite and experimental results showed this to be 34.61 mg · g^?1. The experimental results were correlated reasonably well by the Langmuir adsorption isotherm and the isotherm parameters (Q_o and b) were calculated. Thermodynamic parameters (ΔH° = ?126.64 kJ · mol^?1, ΔS° = ?353.84 J · mol^?1 · K^?1, ΔG° = ?21.14 kJ · mol^?1) showed the exothermic heat of adsorption and the feasibility of the process. The results suggested that sepiolite was suitable as sorbent material for recovery and adsorption of uranium (VI) ions from aqueous solutions.     

Conductivity and fluorescence studies on the micellization properties of sodium cholate and sodium deoxycholate in aqueous medium at different temperatures: Effect of selected amino acids

In order to add to the existing knowledge of aqueous solution behavior of bile salts in presence of amino acids, the micellization properties of sodium cholate (NaC) (1 to 20) mmol · kg⁻¹, and sodium deoxycholate (NaDC) (0.5 to 10) mmol · kg⁻¹ in 0.1 mol · kg⁻¹ aqueous solution of glycine, leucine, methionine, and histidine have been investigated at different temperatures (293.15 to 318.15) K at intervals of T = 5 K by using conductivity and fluorescence probe studies. The critical micelle concentration (CMC) values have been determined and elucidated in terms of hydrophobicity as well as hydrophilicity of NaC and NaDC in aqueous solution of these additives. Thermodynamic parameters of micellization viz. standard Gibbs free energy (Δ_micG^o), standard enthalpy (Δ_micH^o), and standard entropy (Δ_micS^o) have also been calculated to extract information regarding the nature of micellization of bile salts in aqueous solutions. The (enthalpy + entropy) compensation plots have been interpreted to the contribution of chemical part towards micellization or stability of the micelle formed.     

Thermodynamic and isotherm studies of the biosorption of Cu(II), Pb(II), and Zn(II) by leaves of saltbush (Atriplex canescens)

The Freundlich and Langmuir isotherms were used to describe the biosorption of Cu(II), Pb(II), and Zn(II) onto the saltbush leaves biomass at 297 K and pH 5.0. The correlation coefficients (R²) obtained from the Freundlich model were 0.9798, 0.9575, and 0.9963 for Cu, Pb, and Zn, respectively, while for the Langmuir model the R² values for the same metals were 0.0001, 0.1380, and 0.0088, respectively. This suggests that saltbush leaves biomass sorbed the three metals following the Freundlich model (R² > 0.9575). The K_F values obtained from the Freundlich model (175.5 · 10⁻², 10.5 · 10⁻², and 6.32 · 10⁻² mol · g⁻¹ for Pb, Zn, and Cu, respectively), suggest that the metal binding affinity was in the order Pb > Zn > Cu. The experimental values of the maximal adsorption capacities of saltbush leaves biomass were 0.13 · 10⁻², 0.05 · 10⁻², and 0.107 · 10⁻² mol · g⁻¹ for Pb, Zn, and Cu, respectively. The negative ΔG^∘ values for Pb and the positive values for Cu and Zn indicate that the Pb biosorption by saltbush biomass was a spontaneous process.     

Thermochemistry of Cu(II) and Ni(II) complexes with N,N-di-n-butyl-N′-thenoylthiourea and N,N-di-iso-butyl-N′-thenoylthiourea

Two substituted N-acylthioureas and the respective Ni(II) and Cu(II) complexes were synthesized, namely: N,N-di-n-butyl-N′-thenoylthiourea (Hnbtu); N,N-di-iso-butyl-N′-thenoylthiourea (Hibtu); bis[N,N-di-n-butyl-N′-thenoylthioureato]nickel(II), [Ni(nbtu)₂]; bis[N,N-di-n-butyl-N′-thenoylthioureato]copper(II), [Cu(nbtu)₂]; bis[N,N-di-iso-butyl-N′-thenoylthioureato]nickel(II), [Ni(ibtu)₂]; bis[N,N-di-iso-butyl-N′-thenoylthioureato]copper(II), [Cu(ibtu)₂]. The standard (p^° = 0.1 MPa) molar enthalpies of formation and sublimation of the two N-acylthioureas were measured, at T = 298.15 K, by rotating-bomb combustion calorimetry and Calvet microcalorimetry, respectively. The standard (p^° = 0.1 MPa) molar enthalpies of formation of the Ni(II) and Cu(II) complexes were determined, at T = 298.15 K, by high precision solution–reaction calorimetry. From the results obtained, the enthalpies of hypothetical metal–ligand and metal–metal exchange reactions, in the gaseous phase, were derived, thus allowing a discussion of the gaseous phase energetic difference between the complexation of Ni(II) and Cu(II) to 1,3-ligand systems with (S,O) ligator atoms.     

The low-temperature heat capacity and standard entropy of synthetic huttonite ThSiO4

The low-temperature heat capacity of synthetic huttonite ThSiO₄ has been measured from T = (2 to 300) K. The sample was synthesised successfully from SiO₂ and ThO₂ by solid-state reaction at T = 1873 K at atmospheric pressure. From the calorimetric results, the value for the standard entropy $S_{\text{m}}^{°}$ (ThSiO₄, huttonite, 298.15 K) = (104.3 ± 2.0) J · K^?1 · mol^?1 has been obtained. This value indicates that the entropy of reaction from SiO₂ and ThO₂ is negative, giving a positive entropy term (?T · Δ_rS) of the Gibbs free energy of reaction. The implications of this finding are discussed extensively.     

The thermodynamic properties of DyBr3(s) and DyI3(s) from T=5 K to their melting temperatures

Low-temperature calorimetric measurements have been performed on DyBr₃(s) in the temperature range (5.5 to 420 K ) and on DyI₃(s) from T=4 K to T=420 K. The data reveal enhanced heat capacities below T=10 K, consisting of a magnetic and an electronic contribution. From the experimental data on DyBr₃(s) a C⁰_p,m (298.15 K) of (102.2±0.2) J·K⁻¹·mol⁻¹ and a value for {S⁰_m (298.15 K) − S⁰_m (5.5 K)} of (205.5±0.5) J·K⁻¹·mol⁻¹, have been obtained. For DyI₃(s), {S⁰_m (298.15 K) − S⁰_m (4 K)} and C⁰_p,m (298.15 K) have been determined as (226.9±0.5) J·K⁻¹·mol⁻¹ and (103.4±0.2) J·K⁻¹·mol⁻¹, respectively. The values for {S⁰_m (5.5 K) − S⁰_m (0)} for DyBr₃(s) and {S⁰_m (4 K) − S⁰_m (0)} for DyI₃(s) have been calculated, giving S⁰_m (298.15 K)=(212.3±0.9) J·K⁻¹·mol⁻¹ in case of DyBr₃(s) and S⁰_m (298.15 K) =(233.1±0.7) J·K⁻¹·mol⁻¹ for DyI₃(s). The high-temperature enthalpy increment has been measured for DyBr₃(s) in the temperature range (525 to 799 K) and for DyI₃(s) in the temperature range (525 to 627 K). From the results obtained and enthalpies of formation from the literature, thermodynamic functions for DyBr₃(s) and DyI₃(s) have been calculated from T→0 to their melting temperatures at 1151.0 K and 1251.5 K, respectively.     

Adsorptive removal of phenol by bagasse fly ash and activated carbon: Equilibrium,kinetics and thermodynamics

Present study deals with the adsorption of phenol on carbon rich bagasse fly ash (BFA) and activated carbon-commercial grade (ACC) and laboratory grade (ACL). BFA is a solid waste obtained from the particulate collection equipment attached to the flue gas line of the bagasse-fired boilers of cane sugar mills. Batch studies were performed to evaluate the influences of various experimental parameters like initial pH (pH₀), contact time, adsorbent dose and initial concentration (C₀) on the removal of phenol. C₀ varied from 75 to 300 mg/l for the adsorption isotherm studies and the effect of temperature on adsorption. Optimum conditions for phenol removal were found to be pH₀ ≈ 6.5, adsorbent dose ≈10 g/l of solution and equilibrium time ≈5 h. Adsorption of phenol followed pseudo-second order kinetics with the initial sorption rate for adsorption on ACL being the highest followed by those on BFA and ACC. The effective diffusion coefficient of phenol is of the order of 10⁻¹⁰ m²/s. Equilibrium isotherms for the adsorption of phenol on BFA, ACC and ACL were analysed by Freundlich, Langmuir, Temkin, Redlich–Peterson, Radke–Prausnitz and Toth isotherm models using non-linear regression technique. Redlich–Peterson isotherm was found to best represent the data for phenol adsorption on all the adsorbents. The change in entropy (ΔS°) and heat of adsorption (ΔH°) for phenol adsorption on BFA were estimated as 1.8 MJ/kg K and 0.5 MJ/kg, respectively. The high negative value of change in Gibbs free energy (ΔG°) indicates the feasible and spontaneous adsorption of phenol on BFA. The values of isosteric heat of adsorption varied with the surface loading of phenol.     

The solubility measurements of sodium dicarboxylate salts; sodium oxalate,malonate, succinate,glutarate, and adipate in water from T = (279.15 to 358.15) K

The solubility measurements of sodium dicarboxylate salts; sodium oxalate, malonate, succinate, glutarate, and adipate in water at temperatures from (278.15 to 358.15 K) were determined. The molar enthalpies of solution at T = 298.15 K were derived: Δ_solH_m (m = 2.11 mol · kg^?1) = 13.86 kJ · mol^?1 for sodium oxalate; Δ_solH_m (m = 3.99 mol · kg^?1) = 14.83 kJ · mol^?1 for sodium malonate; Δ_solH_m (m = 2.45 mol · kg^?1) = 14.83 kJ · mol^?1 for sodium succinate; Δ_solH_m (m = 4.53 mol · kg^?1) = 16.55 kJ · mol^?1 for sodium glutarate, and Δ_solH_m (m = 3.52 mol · kg^?1) = 15.70 kJ · mol^?1 for sodium adipate. The solubility value exhibits a prominent odd–even effect with respect to terms with odd number of sodium dicarboxylate carbon numbers showing much higher solubility. This odd–even effect may have implications for the relative abundance of these compounds in industrial applications and also in the atmospheric aerosols.     

Extraction thermodynamics of Th(IV) in various aqueous organic systems

Thermodynamic studies on solvent extraction of Th(IV) have been carried out using TBP and HDEHP as extractants in toluene from aqueous bromide and iodide media containing Arsenazo-III as a colouring reagent. This reagent was used for the spectrophotometric determination of Th(IV). The study was carried out at T = {(283, 298, 313) ± 1} K to evaluate lg K_ex as well as the thermodynamic functions ΔG^°, ΔH^°, and ΔS^° of the extraction reactions. The extracted species and the overall extraction mechanisms are postulated.     

Kinetics and mechanism of the reduction of colloidal MnO2 by glycyl-leucine in the absence and presence of surfactants

The kinetics of the reduction of water-soluble colloidal manganese dioxide by glycyl-leucine (Gly-Leu) has been investigated in the presence of perchloric acid both in aqueous as well as micellar media at 35 °C. The study was carried out as functions of [MnO₂], [Gly-Leu] and [HClO₄]. The first-order-rate is observed with respect to [MnO₂], whereas fractional-order-rates are determined in both [Gly-Leu] and [HClO₄]. Addition of sodium pyrophosphate and sodium fluoride enhanced the rate of the reaction. Further, the use of surfactant micelles is highlighted as, in favourable cases, the micelles help the redox reactions by bringing the reactants into a close proximity due to hydrogen bonding. While the ionic surfactants SDS and CTAB have not shown any effect on the reaction rate, the nonionic surfactant TX-100 has catalytic effect which is explained in terms of the mathematical model proposed by Tuncay et al. (1999). The Arrhenius and Eyring equations are valid for the reaction over the range of temperatures used and different activation parameters (E_a, ΔH^#, ΔS^# and ΔG^#) have been evaluated. Kinetic studies show that the redox reaction between MnO₂ and Gly-Leu proceeds through a mechanism combining one- and two-electron pathways: Mn(IV) → Mn(III) → Mn(II) and Mn(IV) → Mn(II). On the basis of the observed results, a possible mechanism has been proposed and discussed.     

Evaluation of Acacia nilotica as a non conventional low cost biosorbent for the elimination of Pb(II) and Cd(II) ions from aqueous solutions

In the present study a biomass derived from the leaves of Acacia nilotica was used as an adsorbent material for the removal of cadmium and lead from aqueous solution. The effect of various operating variables, viz., adsorbent dosage, contact time, pH and temperature on the removal of cadmium and lead has been studied. Maximum adsorption of cadmium and lead arises at a concentration of 2 g/50 ml and 3 g/50 ml and at a pH value of 5 and 4, respectively. The sorption data favored the pseudo-second-order kinetic model. Langmuir, Freundlich and Dubinin–Radushkevich (D–R) models were applied to describe the biosorption isotherm of the metal ions by A. nilotica biomass. Based on regression coefficient, the equilibrium data found were fitted well to the Langmuir equilibrium model than other models. Thermodynamic parameters such as free energy change (ΔG°), enthalpy change (ΔH°) and entropy change (ΔS°) have been calculated, respectively revealed the spontaneous, endothermic and feasible nature of adsorption process. The activation energy of the biosorption (Ea) was estimated as 9.34 kJ mol⁻¹ for Pb and 3.47 kJ mol⁻¹ for Cd from Arrhenius plot at different temperatures.     

Solubilities of l-glutamic acid, 3-nitrobenzoic acid,p-toluic acid,calcium-l-lactate,calcium gluconate,magnesium-dl-aspartate,and magnesium-l-lactate in water

Solubilities of l -glutamic acid, 3-nitrobenzoic acid, p -toluic acid, calcium-l -lactate, calcium gluconate, magnesium- dl -aspartate, and magnesium- l -lactate in water were determined in the temperature range 278 K to 343 K. The apparent molar enthalpies of solution at T =  298.15 K as derived from these solubilities areΔ_solH_m (l -glutamic acid,m_sat =  0.0565 mol · kg ^− 1)  =  30.2 kJ · mol ^− 1,Δ_solH_m (3-nitrobenzoic acid, m =  0.0188 mol · kg ^− 1)  =  28.1 kJ · mol ^− 1, Δ_solH_m( p - toluic acid, m =  0.00267 mol · kg ^− 1)  =  23.9 kJ · mol ^− 1,Δ_solH_m (calcium- l -lactate tetrahydrate,m =  0.2902 mol · kg ^− 1)  =  25.8 kJ · mol ^− 1,Δ_solH_m (calcium gluconate, m =  0.0806 mol · kg ^− 1)  =  22.1 kJ · mol ^− 1, Δ_solH_m(magnesium-dl -aspartate tetrahydrate, m =  0.1469 mol · kg ^− 1)  =  11.5 kJ · mol ^− 1, andΔ_solH_m (magnesium- l -lactate trihydrate,m =  0.3462 mol · kg ^− 1)  =  3.81 kJ · mol ^− 1.     

Strong intramolecular ferromagnetic couplings in nickel(II) and copper(II) complexes chelated with tert-butyl 5-methoxy-2-pyridyl nitroxide

We successfully isolated a new paramagnetic bidentate ligand tert-butyl 5-methoxy-2-pyridyl nitroxide (meopyNO). Complexation of nickel(II) and copper(II) perchlorates with meopyNO gave the corresponding ML₂-type bis-chelated compounds. The magnetic studies showed that they were ground high-spin molecules with 2J/k_B = +288(5) and +178(3) K for [M(meopyNO)₂(H₂O)₂] · (ClO₄)₂ (M = Ni and Cu, respectively), where the spin Hamiltonian is defined as H = ?2J(S₁ · S₂ + S₂ · S₃). From the crystallographic analysis, the torsion angles (?) around M–O–N–C_2py were 4.2(3)° and 6.87(19)°, respectively, being so small that the orthogonality between the magnetic radical π1 and the metal dσ orbitals would be guaranteed.     

Thermochemistry of some barium compounds

The molar enthalpies of reaction of metallic barium with 0.047 mol·dm⁻³ HClO₄ as well as the molar enthalpies of dissolution of BaCl₂ in 1.01 mol·dm⁻³ HCl and in water have been measured at T=298.15 K in a sealed swinging calorimeter with an isothermal jacket. From these results the standard molar enthalpy of formation of the barium ion in an aqueous solution at infinite dilution, as well as the enthalpies of formation of barium chloride and barium perchlorate, are calculated to be: Δ_fH⁰_m(Ba²⁺,aq)=−(535.83±1.25) kJ · mol⁻¹; Δ_fH⁰_m(BaCl₂,cr)=−(855.66±1.28) kJ · mol⁻¹; and Δ_fH⁰_m(BaClO₄,cr)=−(796.26±1.35) kJ · mol⁻¹. The results obtained are discussed and compared with previous experimental values.     

Synthesis and spectroscopic characterization of new tetradentate Schiff base and its coordination compounds of NOON donor atoms and their antibacterial and antifungal activity

New Schiff base (H₂L) ligand is prepared via condensation of o-phthaldehyde and 2-aminobenzoic acid in 1:2 ratio. Metal complexes are prepared and characterized using elemental analyses, IR, solid reflectance, magnetic moment, molar conductance, ¹H NMR, ESR and thermal analysis (TGA). From the elemental analyses data, the complexes were proposed to have the general formulae [MCl(L)(H₂O)]·2H₂O (where M = Cr(III) and Fe(III)); [M(L)]·yH₂O (where M = Mn(II), Ni(II), Cu(II) and Zn(II), y = 1–2) and [M(L)(H₂O)_n]·yH₂O (where M = Co(II) (n = y = 2), Co(II) (n = y = 1), Ni(II) (n = 2, y = 1). The molar conductance data reveal that all the metal chelates were non-electrolytes. IR spectra show that H₂L is coordinated to the metal ions in a bi-negative tetradentate manner with NOON donor sites of the azomethine-N and carboxylate-O. The ¹H NMR spectral data indicate that the two carboxylate protons are also displaced during complexation. From the magnetic and solid reflectance spectra, it was found that the geometrical structure of these complexes are octahedral (Cr(III), Fe(III), Co(II) and Ni(II)), square planar (Cu(II)), trigonal bipyramidal (Co(II)) and tetrahedral (Mn(II), Ni(II) and Zn(II)). The thermal behaviour of these chelates showed that the hydrated complexes losses water molecules of hydration in the first step followed immediately by decomposition of the ligand molecule in the subsequent steps. The biological activity data show that the metal complexes to be more potent/antibacterial than the parent Shciff base ligand against one or more bacterial species.