Square-wave voltammetry and impedance spectroscopy in tin doped melts with the compositions xNa2O · 15Al2O3 · (85 − x)SiO2 (x = 8.5, 11 and 16)

Glasses with the base compositions xNa₂O · 15Al₂O₃ · (85 ? x)SiO₂ (x = 8.5, 11 and 16) doped with 0.5 mol% SnO₂ were investigated by both square-wave voltammetry and impedance spectroscopy in the temperature range from 1300 to 1600 °C. Each recorded square-wave voltammogram exhibits a well pronounced peak attributed to the Sn²⁺/Sn⁴⁺-redox pair. Impedance spectra were measured in a frequency range from 0.1 to 10⁵ s^?1 as a function of the superimposed dc-potential and were simulated using an equivalent circuit taking into account the resistivity of the melt, the electrochemical double layer, a resistor attributed to a kinetically hindered electron transfer and a Warburg parameter which accounts for the diffusion process of Sn⁴⁺ and Sn²⁺ to and from the electrode. Additionally, two impedance elements, a resistor and a capacitance both attributed to adsorption processes were necessary to fit the impedance spectra.     

Nanostructured Crystals of Fluorite Phases Sr1 – xRxF2 + x (R Are Rare-Earth Elements) and Their Ordering. 13: Crystal Structure of SrF2 and Concentration Dependence of the Defect Structure of Nonstoichiometric Phase Sr1 – xLaxF2 + x As Grown (x = 0.11, 0.20, 0.32, 0.37, 0.47)

Crystallography Reports - The defect structure of as-grown SrF2 and nonstoichiometric phases Sr1 – xLaxF2 + x (x = 0.11, 0.20, 0.32, 0.37, 0.47) single...     

Structure and properties of the 70Li2S · (30 − x)P2S5 · xP2O5 oxysulfide glasses and glass–ceramics

The 70Li₂S · (30 ? x)P₂S₅ · xP₂O₅ (mol%) oxysulfide glasses were prepared by the melt quenching method. The glasses were prepared in the composition range 0 ≦ x ≦ 10. The glass–ceramics were prepared by heating the glasses over crystallization temperatures. The PO_nS_3?n (n = 1–3) oxysulfide units were produced in the glasses and glass–ceramics by partial substituting P₂O₅ for P₂S₅. In particular, the P₂OS₆^4? unit would be produced by substituting a small amount of P₂O₅ for P₂S₅. The oxygen atoms were incorporated into the Li₇P₃S₁₁ crystal structure because the diffraction peaks of the oxysulfide glass–ceramic shifted to the higher angle side. The glass–ceramic with 3 mol% of P₂O₅ exhibited the highest conductivity of 3.0 × 10^?3 S cm^?1 and the lowest activation energy for conduction of 16 kJ mol^?1. The P₂OS₆^4? dimer units in the oxygen-incorporated Li₇P₃S₁₁ crystal would improve conductive behavior of the Li₂S–P₂S₅ glass–ceramics.     

Epitaxial lateral overgrowth of non-polar GaN(1 1̄ 0 0) on Si(1 1 2) patterned substrates by MOCVD

m-Plane GaN was grown selectively by metal–organic chemical vapor deposition (MOCVD) on patterned Si(1 1 2) substrates, where grooves aligned parallel to the Si〈1 1 0〉 direction were formed by anisotropic wet etching to expose the vertical Si{1 1 1} facets for growth initiation. The effect of growth conditions (substrate temperature, chamber pressure, and ammonia and trimethylgallium flow rates) on the growth habits of GaN was studied with the aim of achieving coalesced m-plane GaN films. The epitaxial relationship was found to be GaN(1 1? 0 0) || Si(1 1 2), GaN[0 0 0 1] || Si[1 1 –1], GaN[1? 1? 2 0] || Si[1 1? 0]. Among all growth parameters, the ammonia flow rate was revealed to be the critical factor determining the growth habits of GaN. The distribution of extended defects, such as stacking faults and dislocations, in the selectively grown GaN were studied by transmission electron microscopy in combination with spatially resolved cathodoluminescence and scanning electron microscopy. Basal-plane stacking faults were found in the nitrogen-wing regions of the laterally overgrown GaN, while gallium-wings were almost free of extended defects, except for the regions near the GaN/Si{1 1 1} vertical sidewall interface, where high dislocation density was observed.     

Nanostructured Crystals of Fluorite Phases Sr1 – xRxF2 + x (R Are Rare-Earth Elements) and Their Ordering. 15. Concentration Dependence of the Defect Structure of As Grown Nonstoichiometric Phases Sr1 – xRxF2 + x (R = Sm,Gd)

Crystallography Reports - The defect structure of as grown single crystals Sr1 – xSmxF2 + x (x = 0.14, 0.26) and...     

Synthesis and structure–property relations in xCuO–(1 − x)Bi2O3 (0.5 ⩽ x ⩽ 0.9) (C1–C5: x = 0.5, 0.6, 0.7, 0.8, 0.9) glasses

Synthesis of the xCuO–(1 ? x)Bi₂O₃ (0.5 ? x ? 0.9) (C1–C5: x = 0.5, 0.6, 0.7, 0.8, 0.9) glasses was done via nitrate–citrate gel route. Glassy phase is ascertained by XRD studies. Magnetic susceptibility results in the range 4.2–400 K show weak paramagnetic nature with exchange integrals ～0.024–0.13 eV in the glasses. The electron paramagnetic resonance (EPR) in the range 4.2–363 K shows g ≈ 2.0 and the trend of the g-matrix elements g_|| > g_⊥ > g_e for the glasses C1–C5 at 4.2 K are due to the Cu²⁺ (3d⁹) paramagnetic site in the glasses which is in a tetragonally elongated octahedron [O_1/2–CuO_4/2–O_1/2] having D_4h symmetry. IR spectroscopic results show the presence of octahedron [BiO_6/2]^3? and [CuO_6/2]^4? units and pyramidal [BiO_2/2O]^? unit in the glasses.     

Magnetic behavior,transport properties and nanocrystallization of melt-spun YxCe50 − xCu42Al8 (0 ≤ x ≤ 50) amorphous system

Amorphous Y_xCe_50 ? xCu₄₂Al₈ (0 ≤ x ≤ 50) ribbons prepared by melt-spinning on the Cu wheel were subjected to X-ray diffractometry (XRD), differential scanning calorimetry (DSC) and to the measurements of magnetization and resistivity in the temperature range from 1.7 to 300 K. Effective activation energies, characteristic crystallization temperatures and enthalpies of as-quenched alloys have been determined. Two stages of crystallization have been observed in most samples (except shallow effects in Ce₅₀Cu₄₂Al₈). The activation energies have been calculated from the Kissinger relation to be 247 ± 18 and 570 ± 56 kJ/mol for Y₂₅Ce₂₅Cu₄₂Al₈ and Y₅₀Cu₄₂Al₈, respectively. The absence of the endothermic effect for x = 50, usually associated with a glass transition, below the primary crystallization event, indicates the presence of dispersed polyamorphous packing with a wide range of local glass transitions. The magnetization versus temperature plot for Y₂₅Ce₂₅Cu₄₂Al₈ points to a magnetic ordering at temperatures considerably below 50 K. This observation has been confirmed by the temperature dependence of resistivity, which exhibits a singularity at the same temperature. Moreover, a negative temperature coefficient of resistivity, characteristic of disordered systems, was observed. The electrical resistivity in the Y₂₅Ce₂₅Cu₄₂Al₈ amorphous alloy is governed by the weak localization of electrons.     

Optimization of the Compositions of Solid Electrolytes Pb1 – xRxF2 + x with Fluorite-Type Structure in Conductivity and Thermal Stability

Crystallography Reports - The compositions of nonstoichiometric phases Pb1 – xRxF2 + x (CaF2 type, R is a rare-earth element) have been optimized with...     

Structure of TeO2 · B2O3 glasses inferred from infrared spectroscopy and DFT calculations

Glasses in the system (1 ? x)TeO₂ · xB₂O₃ glasses (with x = 0.3 and 0.4) have been prepared from melt quenching method. The structural changes were studied by FTIR spectroscopy and DFT calculations. From the analysis of the FTIR spectra it is reasonable to assume that when increasing boron ions content the tetrahedral [BO₄] units are gradually replaced by trigonal [BO₃] units. The increase in the number of non-bridging oxygen atoms would decrease the connectivity of the glass network, would depolymerize of borate chains and would necessite quite a radical rearrangement of the network formed by the [TeO₆] octahedral. This is possible considering that tellurium dioxide brings stoichiometrically two oxygen atoms in [TeO₄] and needs an additional oxygen atom for the formation of [TeO₆] octahedra. This additional oxygen atom is evidently taken off from the boron co-ordination and thus boron atoms transfer their [BO₄] co-ordination into [BO₃] co-ordination. We used the FTIR spectroscopic data in order to compute two possible models of the glasses matrix. We propose two possible structural models of building blocks for the formation of continuous random network glasses used by density functional theory (DFT) calculations.     

The glass transition temperature of mixed glass former 0.35Na2O + 0.65[xB2O3 + (1 − x)P2O5] glasses

The mixed glass former effect (MGFE) is defined as the non-linear and non-additive change in the ionic conductivity with changing glass former fraction at constant modifier composition between two binary glass former compositions. In this study, sodium borophosphate glasses, 0.35Na₂O + 0.65[xB₂O₃ + (1 ? x)P₂O₅] with 0 ≤ x ≤ 1, have been prepared and their glass transition temperatures (T_g) have been examined as an alternative indicator of the MGFE and as an indicator of changes in the short range order (SRO) structural network units that could cause or contribute to the MGFE. The changes in T_g show a positive non-additive and non-linear trend over the changing glass former fraction, x. The increase in T_g is related to the increasing number of bridging oxygens (BO) in the glass samples, which is caused by the increase in the number of tetrahedral boron, B⁴, units in the SRO structure.     

Comparative Analysis of the Methods for Obtaining Superconducting Fe1 + ySexTe1 – x Single Crystals

Crystallography Reports - The Fe1 + ySexTe1 – x single crystals grown by the KCl flux and Bridgman methods have been compared using the same investigation...     

Optimization of the Compositions of Solid Electrolytes Cd1 – xRxF2 + x (R = La–Lu,Y) with a Fluorite-Type Structure for Conductivity and Thermal Stability

Crystallography Reports - Optimization of the compositions of Cd1–xRxF2+x nonstoichiometric phases (CaF2 type, R is a rare-earth element) for the ionic conductivity and thermal stability is...     

Role of interfacial crystallites in the crystallization of α-Fe2O3/α-Al2O3(0 0 0 1) thin films

In situ crystallization of α-Fe₂O₃/α-Al₂O₃(0 0 0 1) thin films was studied in real-time synchrotron X-ray scattering experiments. We find the coexistence of α-Fe₂O₃ (hexagonal) and Fe₃O₄ (cubic) interfacial crystallites (∼50-Å-thick), well aligned [0.02° full-width at half-maximum (FWHM)] to the α-Al₂O₃[0 0 0 1] direction, in the sputter-grown amorphous films. As the annealing temperature increases up to 750°C, the cubic stacking of the Fe₃O₄ crystallites gradually changes to the hexagonal α-Fe₂O₃ stacking, together with the growth of the well-aligned (WA) (0.02° FWHM) grains from the α-Fe₂O₃ crystallites. In the meanwhile, heterogeneous nucleation starts to occur on the substrate at ∼600°C, resulting in the formation of misaligned (1.39° FWHM) α-Fe₂O₃ grains. Our study reveals that the interfacial crystallites act as a template for the growth of the WA α-Fe₂O₃ grains.     

Growth of Sm1 – ySryF3 – y (0 < y ≤ 0.31) Crystals and Investigation of Their Properties

Crystallography Reports - Sm1&nbsp;–&nbsp;ySryF3&nbsp;–&nbsp;y (0 &lt; y ≤ 0.31) crystals have been grown from melt by directional solidification in a...     

Mössbauer and Magnetic Study of Lanthanum Manganite La1 – xCaxMn0.98Fe0.02O3 + δ (x = 0.05, 0.10, 0.20): Nonstoichiometric and Stoichiometric Composition

Crystallography Reports - Mössbauer and magnetic study of calcium-doped lanthanum manganites La1&nbsp;–&nbsp;xCaxMn0.98Fe0.02O3&nbsp;+&nbsp;δ (x = 0.05, 0.10, 0.20)...     

Crystallization kinetics of a-Se75Te25 − xGax (x = 0, 5, 10 and 15 at wt %) glassy system

Bulk glasses of a-Se₇₅Te_25 ? xGa_x (x = 0, 5, 10 and 15 at wt %) have been prepared by melt quenching technique. These samples were structurally characterized by using X-ray diffraction. Kinetic of crystallization in these glasses was studied under non-isothermal conditions using differential thermal analysis (DTA). DTA is performed at different heating rates of 5, 10, 15, 20 and 30 °C/min. The values of glass transition (T_g) and crystallization peak temperature (T_p) are found to be composition and heating-rate dependent. The obtained results have been analyzed in terms of activation energy of glass transition (E_g) using Kissinger's and Mahadevan et al. relations. Values of E_g obtained by the two relations are in agreement with each other. The results indicate that the crystallization process is a three-dimensional growth.     

Electronic properties calculation of Ge1 − x − ySixSny ternary alloy and nanostructure

The band structure of Ge_{1 ? x ? y}Si_xSn_y ternary alloys, which are easier to grow than binary Ge_1-xSn_x alloys, and clearly offer a wider tunability of their direct band-gap and other properties, was calculated and investigated by using the empirical pseudo-potential plane wave method with modified Falicov pseudo-potential formfunction. The virtual crystal approximation (VCA) and 2 × 2 × 2 super-cell (mixed atoms) method were adopted to model the alloy. In order to calculate all of these properties, the empirical pseudo-potential code was developed. The lattice constant of the alloy varies between 0.543 to 0.649 nm. The regions in the parameter space that corresponds to a direct or indirect band gap semiconductor are identified. The Ge_{1 ? x ? y}Si_xSn_y ternary alloy shows the direct band gap for appropriate composition of Si, Ge and Sn. The direct energy gap is in the range 0–1.4 eV (from the VCA calculation), and 0–0.8 eV (from the super-cell calculation), depending on the alloy composition. Therefore, this alloy is a promising material for optoelectronic applications in both visible and infrared range, such as interband lasers or, solar cells. Furthermore, strain-free heterostructures based on such alloys are designed and, using the effective-mass Hamiltonian model, the electronic structure of GeSiSn quantum wells with arbitrary composition is investigated, in order to understand their properties and the potential of their use in devices.