Amphiphilic Hexylamine Modified Polysuccinimide: Synthesis,Characterization, and Formation of Nanoparticles in Aqueous Medium

A series of hexylamine modified polysuccinimide (PSI–HA) copolymers were synthesized by aminolysis of polysuccinimide (PSI) with hexylamine. FTIR and ¹H NMR measurements confirmed the structure of the copolymers and the substitution degree of the N-hexyl aspartamide units ranged from 7 to 92 mol%. Stable nanoparticles formed when the DMF solution of PSI–HA copolymers was dropped into excess water, and the particle size reduced as increasing the substitution degree. ¹H NMR analysis indicated that hexyl chain and succinimide units interacted to form the hydrophobic core, while, the nanoparticles were stabilized by the amide groups which formed hydrogen bonds with the surrounding water molecules. The nanoparticles became more compact at higher temperature due to the break of hydrogen bonds between amide groups and water molecules. Dynamic light scattering (DLS) and scanning electron microscopy (SEM) results showed that the nanoparticles were nearly spherical. Larger nanoparticles formed when the dispersion concentration increased from 0.1% to 1.0% according to the DLS and steady-state fluorescence measurements. After the nanoparticles formed in water, a sequential dilution can't influence the particles size of the nanoparticles any longer.     

Itaconic anhydride based amphiphilic copolymers: Synthesis, characterization and stabilization of carboxyl functionalized, PEGylated nanoparticles

N-Vinyl-2-pyrrolidone (NVP) and itaconic anhydride (IA) copolymers were synthesized via radical polymerization. The synthesized copolymers were grafted with MPEG chains of different average molecular weights (350, 550, 750 Da). The grafted copolymers were used as surfactants in the synthesis of poly(ε-caprolactone) (PCL) nanoparticles in water by solvent evaporation technique. In order to further test the synthesized surfactants, the miniemulsion polymerization of vinyl acetate was performed. Two methods of obtaining miniemulsion were implied: a sonicator and a static mixer. The synthesized surfactants performed well in both type of experiments while in the case of static mixer nanoparticles with a lower polydispersity were obtained. Droplets with a mean diameter of 160 nm were obtained when using the sonicator while in the case of static mixer the mean diameter was 280 nm.     

Clonazepam release from core-shell type nanoparticles composed of poly(γ-benzyl L-glutamate) as the hydrophobic part and poly(ethylene oxide) as the hydrophilic part

Block copolymers consisting of poly(γ-benzyl L -glutamate) (PBLG) as the hydrophobic part and poly(ethylene oxide) (PEO) as the hydrophilic part were synthesized and characterized. Core shell type nanoparticles of the block copolymers (abbreviated GEG) were prepared by the dialysis method. Under fluorescence spectroscopy measurement, the GEG block copolymers were associated in water to form core shell type nanoparticles as polymeric micelles and the critical micelle concentrations (CMC) values of the block copolymers decreased with increasing PBLG chain length in the block copolymers. Transmission electron microscopy (TEM) observations revealed nanoparticles of spherical shapes. From dynamic light scattering (DLS) study, sizes of nanoparticles of GEG-1 and GEG-2 copolymer were 64.3 ± 28.7 nm and 28.9 ± 7.0 nm. The drug-loading contents of GEG-1 and GEG-2 nanoparticles were 15.2 and 8.3 wt %, respectively. These results indicated that the drug-loading contents were dependent on PBLG chain length in the copolymer. Then, the longer the PBLG chain length, the more the drug-loading contents. Release of clonazepam (CNZ) from the nanoparticles was slower in higher loading contents of CNZ than lower loading contents due to the hydrophobic interaction between PBLG core and CNZ. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 415–423, 1998     

Block copolymers in the synthesis of gold nanoparticles. Two new approaches: Copolymer aggregates as reductants and stabilizers and simultaneous formation of copolymer aggregates and gold nanoparticles

In this article, innovative applications of amphiphilic triblock and pentablock copolymers in the synthesis of gold nanoparticles are reported. The synthesis of gold nanoparticles is performed using two methods. In the first method, micellar aggregates of block copolymers and AuCl₄^? ions directly react in water; the nanoparticles obtained by this method are variable in size and are associated with copolymer aggregates. In the second method, two processes take place simultaneously: the aggregation of block copolymers and the reduction of Au (III) by the copolymers to form nanoparticles. In contrast with the first method, in this case, the nanoparticles obtained are located inside the copolymer aggregates. In both methods of synthesis, the block copolymers act simultaneously as reducing and stabilizing agents. To understand the role of copolymer aggregates in the synthesis of nanoparticles, molecular simulation methods are used. The gold nanoparticles, copolymer aggregates, and nanocomposite systems are characterized using transmission electron microscopy and dynamic light scattering. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3069–3079     

Synthesis and characterization of water‐soluble gold nanoparticles stabilized by comb‐shaped copolymers

The water‐soluble gold nanoparticles stabilized by well‐defined comb‐shaped copolymers have been synthesized successfully. The hybrid nanoparticles consist of gold core and poly[poly(ethylene oxide) methyl ether acrylate]‐block‐poly(N‐isopropylacrylamide) [P(A‐MPEO)‐block‐PNIPAM] shell. The water‐soluble comb‐shaped copolymers, P(A‐MPEO)‐block‐PNIPAM with PNIPAM as a handle, were successfully synthesized via a macromonomer technique using reversible addition fragmentation chain transfer (RAFT) polymerization method. The terminal dithioester group of the comb‐shaped copolymer was reduced to a thiol end group forming SH‐terminated copolymers, P(A‐MPEO)‐block‐PNIPAM‐SH. Successively they were used to stabilize gold nanoparticles by the “grafting‐to” approach. The hybrid nanoparticles were characterized by TEM, UV–vis, and HRTEM. Because of the thermosensitive property of PNIPAM in aqueous solution, the comblike copolymer‐tethered gold nanoparticles show a sharp and reversible phase transition at 30 °C in aqueous solution, which was determined by microdifferential scanning calorimetry. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 341–352, 2008     

Poly(ethylene oxide)–poly(ethylene imine) block copolymers as templates and catalysts for the in situ formation of monodisperse silica nanospheres

Block copolymers based on poly(ethylene oxide) (PEO) and poly(ethylene imine) (PEI) are efficient catalysts/templates for the formation of uniform silica nanoparticles. Addition of tetraethylorthosilicate to a solution of PEO–PEI or PEI–PEO–PEI block copolymers results in the formation of silica particles with a diameter of ca. 30 nm and narrow size distribution. The particles precipitated with the diblock copolymers can be redispersed in water after isolation as individual nanoparticles. Evidently, block copolymers based on PEO and PEI serve as excellent templates for the biomimetic and “soft” synthesis of silica nanoparticles.

A Simple Protocol to Stabilize Gold Nanoparticles using Amphiphilic Block Copolymers: Stability Studies and Viable Cellular Uptake

Di‐ and triblock non‐ionic copolymers based on poly(ethylene oxide) and poly(propylene oxide) were studied for the stabilization of nanoparticles in water at high ionic strength. The effect of the molecular architecture (di‐ vs. triblock) of these amphiphilic copolymers was investigated by using gold nanoparticles (AuNPs) as probes for colloidal stability. The results demonstrate that both di‐ and triblock copolymers can provide long term stability, and that in both cases AuNPs are individually embedded within globules of polymers. However, in the case of diblock copolymers, the colloidal stability was related to the formation of micelles, in contrast with the case of triblock copolymers, which were previously shown to provide good stability even at concentrations at which micelles do not form. Quartz crystal microbalance (QCM) experiments showed that the presence of the hydrophobic block in the structure of the polymer is important to ensure quantitative adsorption upon a gold surface and to limit desorption. We demonstrate that with an appropriate choice of polymer, the polymer/AuNP hybrids can also undergo filtration and freeze‐drying without noticeable aggregation, which can be very convenient for further applications. Finally, preliminary studies of the cytotoxicity effect on fibroblast cells show that the polymer/AuNP hybrids were not cytotoxic. TEM micrographs on ultrathin sections of cells after incubation with the colloidal solutions show that the nanoparticles were internalized into the cells, conserving their initial size and shape.     

Star-block copolymers as templates for the preparation of stable gold nanoparticles

Gold nanoparticles of improved stability against aggregation were prepared using poly(ethylene oxide)-block-poly(epsilon-caprolactone) (PEO-b-PCL) star-block copolymers. A five-arm star-shaped macroinitiator (PEO) was utilized for the automated parallel controlled ring-opening polymerization of epsilon-caprolactone to prepare a series of PEO-b-PCL star-block copolymers with a constant PEO core linked to PCL blocks of variable length. The PEO core was swelled with KAuCl4 in N,N-dimethylformamide (DMF), and gold nanoparticles were subsequently obtained by reduction with NaBH4. Since the process was always templated by the same PEO core for all investigated polymers, the average dimension of the formed gold nanoparticles was in the same range for all star-block copolymers. In sharp contrast, the size distribution and long-term stability against aggregation of the gold nanoparticles dispersed in DMF were strongly dependent on the PCL block length, confirming the role of PCL blocks as stabilizing blocks for these nanoparticles.     

由嵌段共聚物制备有形状的核壳结构聚合物纳米颗粒

嵌段共聚物可自发组装形成形貌丰富的纳米粒子和有序纳米结构的材料,为纳米材料和纳米技术领域提供了很重要的新材料和新手段.该领域的进一步发展提出了对嵌段共聚物的自组装体赋予功能性的要求,即需要通过可控聚合反应合成反应性嵌段共聚物,并且对其自组装的纳米粒子进行结构、形状及功能性的调控.本文针对以上研究目标,结合本课题组在该领...     

Water-dispersible, uniform nanospheres by heating-enabled micellization of amphiphilic block copolymers in polar solvents

Uniform nanospheres with tunable size down to 30 nm were prepared simply by heating amphiphilic block copolymers in polar solvents. Unlike reverse micelles prepared in nonpolar, oily solvents, these nanospheres have a hydrophilic surface, giving them good dispersibility in water. Furthermore, they are present as individual, separated, rigid particles upon casting from the solution other than continuous thin films of merged micelles cast from micellar solution in nonpolar solvents. These nanospheres were generated by a heating-enabled micellization process in which the affinity between the solvent and the polymer chains as well as the segmental mobility of both hydrophilic and hydrophobic blocks was enhanced, triggering the micellization of the glassy copolymers in polar solvents. This heating-enabled micellization produces purely well-defined nanospheres without interference of other morphologies. The micelle sizes and corona thickness are tunable mainly by changing the lengths of the hydrophobic and hydrophilic blocks, respectively. The heating-enabled micellization route for the preparation of polymeric nanospheres is extremely simple, and is particularly advantageous in producing rigid, micellar nanospheres from block copolymers with long glassy, hydrophobic blocks which are otherwise difficult to prepare with high efficiency and purity. Furthermore, encapsulation of hydrophobic molecules (e.g., dyes) into micelle cores could be integrated into the heating-enabled micellization, leading to a simple and effective process for dye-labeled nanoparticles and drug carriers.     

Novel core-shell type thermo-sensitive nanoparticles composed of poly(γ-benzyl L-glutamate) as the core and poly(N-isopropylacrylamide) as the shell

AB diblock copolymers consisting of PBLG as the hydrophobic part and PNIPAAm as the hydrophilic one were prepared by polymerization of BLG-NCA with semitelechelic PNIPAAm with amino end group as initiator. The core-shell type nanoparticles of the block copolymers were obtained by the diafiltration method. The sizes of the nanoparticles were from about 73 to 359 nm and the shapes of them were spherical. The release for indomethacin (IN) from the nanoparticles was faster at 28°C than at 34°C due to the conformational change of PNIPAAm by temperature.     

Fusiform micelles from nonlinear poly(ethylene glycol)/polylactide copolymers as biodegradable drug carriers

PEG-PLA copolymers with dumbbell- and Y-shaped structures are prepared. They can self-assemble from nanoparticles to micro-sized fusiform micellar particles in aqueous solution. In particular the micelles formed by the (PLA)2-PEG-(PLA)2 particles show a better drug loading capacity and encapsulation efficiency than those formed by linear MPEG-PLA. In vitro studies show that the particles formed by Y-shaped copolymers show a particularly quick drug release. The copolymers have good biocompatibility with low cytotoxicity. These unique self-assembled systems thus have many possible biomedical applications, such as a sustained delivery of high-dosed water insoluble drugs, quick effective drugs for trauma, controlled delivery of the oral-administration drugs, and so forth.     

Biocompatible,Hemocompatible and Antibacterial Acylated Dextran-g-polyisobutylene Graft Copolymers with Silver Nanoparticles

The novel amphiphilic acylated dextran-g-polyisobutylene(AcyDex-g-PIB) graft copolymers with different branch lengths(M_n,PIB,2600–5800 g/mol) and grafting numbers(G_N, 5–28 per 1000 Dex monosaccharide) were successfully synthesized via the nucleophilic substitution of the hydroxyl(―OH) side groups along AcyDex backbone by the living PIB-THF₄⁺ chains prepared through cationic polymerization. The crystallization of AcyDex backbone in AcyDex-g-PIB graft co...     

Amphiphilic block copolymer self‐assemblies of poly(NVP)‐b‐poly(MDO‐co‐vinyl esters): Tunable dimensions and functionalities

Functional, degradable polymers were synthesized via the copolymerization of vinyl acetate (VAc) and 2‐methylene‐1,3‐dioxepane (MDO) using a macro‐xanthate CTA, poly(N‐vinylpyrrolidone), resulting in the formation of amphiphilic block copolymers of poly(NVP)‐b‐poly(MDO‐co‐VAc). The behavior of the block copolymers in water was investigated and resulted in the formation of self‐assembled nanoparticles containing a hydrophobic core and a hydrophilic corona. The size of the resultant nanoparticles was able to be tuned with variation of the hydrophilic and hydrophobic segments of the core and corona by changing the incorporation of the macro‐CTA as well as the monomer composition in the copolymers, as observed by Dynamic Light Scattering, Static Light Scattering, and Transmission Electron Microscopy analyses. The concept was further applied to a VAc derivative monomer, vinyl bromobutanoate, to incorporate further functionalities such as fluorescent dithiomaleimide groups throughout the polymer backbone using azidation and “click” chemistry as postpolymerization tools to create fluorescently labeled nanoparticles. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2699–2710     

Preparation of stable gold nanoparticles by using diblock copolymer mixture as encapsulating agent

Gold nanoparticles by using the mixture of polystyrene-block-poly(2-vinyl pyridine)/poly(2-vinyl pyridine)-block-poly(ethylene oxide) (PS-b-P2VP/P2VP-b-PEO) block copolymers as encapsulating agent was prepared. The prepared nanoparticles were characterized by transmission electron microscopy, UV-Vis spectroscopy and contact angle. It is demonstrated that the obtained gold nanoparticles are covered with mixed block copolymer shells. The hydrophilic property of the nanoparticles can be varied by the change of the dispersion medium. The obtained gold nanoparticles with mixed block copolymer shells are stable in organic solvents (such as tetrahydrofuran and toluene) and water.     

Self-assembly of pH-sensitive random copolymers: poly(styrene-co-4-vinylpyridine)

A series of pH-sensitive random copolymers, poly(styrene-co-4-vinylpyridine) (PSVP), with molecular weight about 10,000 and 4-vinylpyridine molar contents of 19-53%, were conveniently synthesized by free radical polymerization. The copolymers experience the formation, swell, and dissociation of multichain nanoparticles when the pH of the aqueous solutions/dispersions changes from 5.1 to 1.0. The nanoparticles have hydrodynamic diameters around 100 nm, a spherical shape, and a relatively uniform structure in a pH range of about 5-3 and a multicore structure at lower pH. The random distribution of the building units causes some of the hydrophilic units, protonated 4-vinylpyridine groups, to be trapped inside the nanoparticles. So the hydrophobicity of the nanoparticles is tunable by changing the 4-vinylpyridine content in the copolymers. For the copolymers with higher 4-vinylpyridine molar content, the pH range in which the multichain nanoparticles form shifts to higher values, the multichain nanoparticles dissociate, and the copolymers form single-chain hydrophobic domains at low pH.     

Formation of Polymeric Nanocubes by Self‐Assembly and Crystallization of Dithiolane‐Containing Triblock Copolymers

Template‐free fabrication of non‐spherical polymeric nanoparticles is desirable for various applications, but has had limited success owing to thermodynamic favorability of sphere formation. Herein we present a simple way to prepare cubic nanoparticles of block copolymers by self‐assembly from aqueous solutions at room temperature. Nanocubes with edges of 40–200 nm are formed spontaneously on different surfaces upon water evaporation from micellar solutions of triblock copolymers containing a central poly(ethylene oxide) block and terminal trimethylene carbonate/dithiolane blocks. These polymers self‐assemble into 28±5 nm micelles in water. Upon drying, micelle aggregation and a kinetically controlled crystallization of central blocks evidently induce solid cubic particle formation. An approach for preserving the structures of these cubes in water by thiol‐ or photo‐induced crosslinking was developed. The ability to solubilize a model hydrophobic drug, curcumin, was also explored.     

Biocompatible poly(ethylene glycol)‐poly(γ‐cholesterol‐L‐glutamate) copolymers: Synthesis,characterization, and in vitro studies

A novel amphiphilic poly(ethylene glycol)‐block‐poly(γ‐cholesterol‐L ‐glutamate) (mPEG–PCHLG) diblock copolymer has been synthesized. The mPEG–PCHLG copolymer has good biocompatibility and low toxicity. The mPEG–PCHLG copolymers could aggregate into nanoparticles with PCHLG blocks as the hydrophobic core and PEG blocks as the hydrophilic shell through emulsion solvent evaporation method. The copolymers were characterized by nuclear magnetic resonance spectroscopy, mass spectrum, Fourier transform infrared spectroscopy, and gel permeation chromatography. The particle sizes, size distributions, and zeta potentials of nanoparticles can also be determined by dynamic light scattering and transmission electron microscopy. This work provides a new and facile approach to prepare amphiphilic block copolymer nanoparticles with controllable performances. This novel copolymer may have potential applications in drug delivery and bioimaging applications.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Methoxy poly(ethylene glycol)-b-poly(valerolactone) diblock polymeric micelles for enhanced encapsulation and protection of camptothecin

Amphiphilic block copolymers, methoxy poly(ethylene glycol)-b-poly(valerolactone) (mPEG-b-PVL), were synthesized via ring opening polymerization of δ-valerolactone in the presence of methoxy poly(ethylene glycol) (mPEG). The copolymers form micelle-like nanoparticles by their amphiphilic characteristics and their structures were examined by Nuclear Magnetic Resonance (NMR). The sizes of nanoparticles ranged from 60 to 120 nm as measured by dynamic light scattering detection, and were larger with higher molecular weight of the copolymers. The Critical Micelle Concentration (CMC) of these nanoparticles in water decreased with increasing molecular weight of hydrophobic segment. Stability analysis showed that the micellar solutions maintain their sizes at 37 °C for six weeks without aggregation or dissociation. The lyophilization method was better than the evaporation method when camptothecin (CPT) was incorporated to the micelles. The former method yielded higher CPT loading efficiency and lower aggregation. The loading efficiency of CPT could be more than 96% and a steady release rate of CPT was kept for twenty six days. Moreover, the mPEG-b-PVL polymeric micelles offered good protection of CPT lactone form at 37 °C for sixteen days. The copolymers showed no cytotoxicity towards L929 mouse muscular cells when incubated for one day. Taken together, the mPEG-b-PVL copolymer has potential to be used for the delivery of CPT or other similar drugs.     

Amphiphilic poly(ethylene glycol)-b-poly(ethylene brassylate) copolymers: One-pot synthesis,self-assembly,and controlled drug release

A set of amphiphilic poly(ethylene glycol)-b-poly(ethylene brassylate) (PEG-b-PEB) copolymers based on the PEB hydrophobic block was first synthesized by ring-opening polymerization of ethylene brassylate with an organic catalyst. The EB/PEGmolar ratios and reaction times were adjusted to achieve different chain lengths of PEB. Block copolymers that were characterized by ¹H NMR and GPC could selfassemble into multimorphological aggregates in aqueous solution, which were characterized by DLS and TEM. The hydrophobic doxorubicin (DOX) was chosen as a drug model and successfully encapsulated into the nanoparticles. The release kinetics of DOX were investigated.