Sorption of transition metal cations on natural heulandite

The cation exchange equilibrium in the systems of natural heulandite-binary aqueous solutions of NaCl, NiCl₂, CuCl₂, ZnCl₂, and MnCl₂ was studied. The corrected coefficients of the selectivity (k ^a _M/Na) and thermodynamic constants (K _M/Na) of the cation exchange of Na⁺ cations for transition metal cations were determined. The selectivity of the cation exchange on natural heulandite increases in the following order: Ni²⁺ < Cu²⁺ < Zn²⁺ < Na²⁺ < Mn²⁺.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1101–1103, May, 1996.     

Control of site-specific substitution of aminoglycosides by transition metal cations

The site of transition metal-directed acylations of apramycin and related aminoglycosides can be altered simply by changing the metal cation employed in the reaction.     

Ion mobility of ground and excited states of laser-generated transition metal cations

The application of ion mobility to separate the electronic states of first-, second-, and third-row transition metal cations generated by the laser vaporization/ionization (LVI) technique is presented. The mobility measurements for most of the laser-generated transition metal cations reveal the presence of two or three mobility peaks that correspond to ground and excited states of different electronic configurations. The similarity of the measured reduced mobilities for the metal cations generated by LVI, electron impact, and glow discharge ion sources indicates that the same electronic configurations are produced regardless of the ion source. However, in comparison with electron impact of volatile organometallic compounds, the LVI populates fewer excited states due to the thermal nature of the process. Significant contributions to the production and populations of excited states of Ni+, Nb+, and Pt+ cations have been observed in the presence of argon during the LVI process and attributed to the Penning ionization mechanism. The origin of the mobility difference between the ground and the excited states is mainly due to the different interaction with helium. The ratio of the reduced mobilities of the excited and ground states decreases as one goes from the first- to the second- to the third-row transition metal cations. This trend is attributed to the ion size, which increases in the order 6sd(n-1) > 5sd(n-1) > 4sd(n-1). This work helps to understand the mechanisms by which transition metal cations react in the gas phase by identifying the ground and excited states that can be responsible for their reactivity.     

Solvothermal synthesis and characterization of polyselenidoarsenate salts of transition metal complex cations

The polyselenidoarsenates [Fe(phen)(3)][As(2)Se(6)] (1), [Zn(phen)(dien)][As(2)Se(6)]·2phen (2), [{Mn(phen)(2)}(2)(μ-η(2),η(2)-AsSe(4))](2)[As(2)Se(6)]·H(2)O (3), and [Ni(phen)(3)][As(2)Se(2)(μ-Se(3))(μ-Se(5))] (4) (dien = diethylenetriamine and phen = 1,10-phenanthroline) were prepared by the reaction of As(2)O(3), Se, dien, and phen in the presence of transition metals in a methanol solvent under solvothermal conditions. Compounds 1-3 consist of [As(2)Se(6)](2-) anions with [Fe(phen)(3)](2+), [Zn(phen)(dien)](2+), and [{Mn(phen)(2)}(2)(μ-η(2),η(2)-AsSe(4))](+) complex counter cations, respectively. The [As(2)Se(6)](2-) anion is formed from two As(III)Se(3) trigonal pyramids linked through two Se-Se bonds. Compound 3 is the first example of a mixed-valent selenidoarsenate(III,V) and exhibits the coexistence of As(III)Se(3) trigonal pyramidal and As(V)Se(4) tetrahedral units. Compound 4 is composed of a helical chain of [As(2)Se(2)(μ-Se(3))(μ-Se(5))(2-)](∞) and octahedral [Ni(phen)(3)](2+) cations. The [As(2)Se(2)(μ-Se(3))(μ-Se(5))(2-)](∞) chain is constructed from AsSe(+) units alternatively linked by μ-Se(3)(2-) and μ-Se(5)(2-) bridging ligands. When the structures of compounds 1-4 are compared, the transition metal ions show different structural directing effects during the synthesis of arsenic polyselenides in methanol. Compounds 1, 2, 3, and 4 exhibit semiconducting properties with band gaps of 1.88, 2.29, 1.82, and 2.01 eV, respectively.     

Molecular clips based on diphenylglycoluril and benzocrown ethers: promising complexing agents for the alkali metal cations

The interaction of new molecular clips containing diphenylglycoluril and benzocrown ethers moieties with alkali metals ions was studied. Stability constants were determined by spectrophotometric titrations with chloride salts in methanol. Complex stability and cation binding selectivity were shown to be dependent on the size of the crown ether moiety. The “sandwich-type” 1:1 (clip to cation) complexes and the “classical” 1:2 complexes were found. Their ratio varies depending on the molecular clips nature and on the cation type. It was found an unexpected selectivity of the molecular clip with benzo-15-crown-5 moieties toward K⁺ and Rb⁺ cations. The molecular structure of the clip complex with benzo-15-crown-5 fragments and sodium picrate was determined by X-ray crystallography. The crystal structure and solution-state structure were proven to be similar.     

Structure and bonding in first-row transition metal dicarbide cations MC2+

A theoretical study of the first-row transition metal dicarbide cations MC2+ (M=Sc-Zn) has been carried out. Predictions for different molecular properties that could help in their eventual experimental detection have been made. Most MC2+ compounds prefer a C2v symmetric arrangement over the linear geometry. In particular, the C2v isomer is specially favored for early transition metals. Only for CuC2+ is the linear isomer predicted to be the global minimum, although by only 1 kcal/mol. In all cases the isomerization barrier between cyclic and linear species seems to be very small (below 2 kcal/mol). The topological analysis of the electronic density shows that most C2v isomers are T-shaped structures. In general, MC2+ compounds for early transition metals have larger dissociation energies than those formed by late transition metals. In most cases the dissociation energies for MC2+ compounds are much smaller than those obtained for their neutral analogues. An analysis of the bonding in MC2+ compounds in terms of the interactions between the valence orbitals of the fragments helps to interpret their main features.     

On the bonding of first-row transition metal cations to guanine and adenine nucleobases

The binding of first-row transition metal monocations (Sc+-Cu+) to N7 of guanine and N7 or N3 of adenine nucleobases has been analyzed using the hybrid B3LYP density functional theory (DFT) method. The nature of the bonding is mainly electrostatic, the electronic ground state being mainly determined by metal-ligand repulsion. M+-guanine binding energies are 18-27 kcal/mol larger than those of M+-adenine, the difference decreasing along the row. Decomposition analysis shows that differences between guanine and adenine mainly arise from Pauli repulsion and the deformation terms, which are larger for adenine. Metal cation affinity values at this level of calculation are in very good agreement with experimental data obtained by Rodgers et al. (J. Am. Chem. Soc. 2002, 124, 2678) for adenine nucleobases.     

A new rhodamine-based fluorescent chemosensor for transition metal cations synthesized by one-step facile condensation

A new rhodamine-based fluorescent chemosensor (1) for transition metal cations was synthesized by one-step facile condensation of rhodamine B and 2-aminopyridine. Without metal cations, 1 is colorless and nonfluorescent, whereas addition of metal cations (Fe³⁺, Hg²⁺, Pb²⁺, and Fe²⁺) leads to an obvious color change to pink and an appearance of orange fluorescence.     

Density functional study of ammonia activation by late first-row transition metal cations

Density functional theory (DFT) in its B3LYP implementation is used to investigate the reaction of ammonia with the late (Co(+), Ni(+), and Cu(+)) first-row transition metal cations in both high- and low-spin states. The potential energy surfaces (PES's) leading to three different exit channels are closely examined. The binding energies for the reaction products are calculated and compared with the corresponding experimental values. A comparison with our earlier works covering the reactivity of the Sc-Fe series of cations is made in order to underline similarities and differences of the reaction mechanisms as well as to establish trends along the row.     

High affinity DNAzyme-based ligands for transition metal cations - a prototype sensor for Hg2+

Inspired by recent interest in DNAzymes as transition metal ion sensors, a survey of the effects of various transition metals on the intramolecular cleavage rate of an imidazole modified, M(2+)-independent, self-cleaving "9(25)-11" DNA is reported. In particular, 9(25)-11 activity was strongly inhibited by Hg(2+)(K(d)(APP)= 110 +/- 9 nM). It is postulated that the affinity and selectivity of 9(25)-11 for Hg(2+) stems from the fact that this synthetically modified DNAzyme contains imidazoles. This study demonstrates the utility of modified nucleotides in developing DNAzyme sensors for metals ions, especially those for which unmodified nucleic acids might not serve as inherently good ligands.     

Organometallic ionophore for alkali metal cations

Complexes of a novel synthetic organometallic ionophore with lithium and sodium cations have been characterized by single-crystal X-ray diffraction. The crystal structure of the lithium complex consists of cation-liganddimers with a tetrahedral coordination around Li. The sodium complex reveals a different structure type consisting of cation-ligandtrimers, with water molecules being included between the trimeric entities. The coordination sphere around the Na ions has a distorted octahedral symmetry. It is anticipated that the observed structures of dinuclear Li and trinuclear Na complexes represent possible modes of aggregation of the cation-ligand entities in lipophilic media.     

Development of a new fluorescent probe for transition metal cations based upon fluorescence resonance energy transfer

A novel fluorescent probe for metal cations, which has a large Stokes shift, was synthesized from the reaction of N-(3-carboxy-2-naphthyl)-ethylenediamine-N,N′,N′-triacetic acid (CNEDTA) with 4-(N,N-dimethylaminosulfonyl)-7-(2-aminoethylamino)-2,1,3-benzoxadiazole (DBD-ED). The large Stokes shift is due to the FRET phenomenon between a donor (CNEDTA) and an acceptor (DBD-ED) fluorophore. When the fluorescent probe, DBD-ED-CNEDTA, was excited at 240, 340 and 440 nm, an emission maximum was observed only at 560 nm. However, the fluorescence (FL) at 480 nm, based upon the CNEDTA moiety, was not detected with excitation at 340 nm. The FL intensity of DBD-ED-CNEDTA was dependent upon the acidity of the medium and highest at pH 4.1. DBD-ED-CNEDTA reacted with metal cations, i.e., Zn, Cd, Al, Y, and La, in aqueous medium to form chelates. The spectral change of FL excitation and emission was small before and after the addition of the metal ions. However, the FL intensity was dependent upon the concentrations of the metal ions. In the case of Zn²⁺, the molar ratio bound with DBD-ED-CNEDTA was calculated as 1:1. The FL intensities after chelate formation of Zn/DBD-ED-CNEDTA (1:1) were enhanced by 3.8-fold (excitation at 340 nm, emission at 560 nm), 4.2-fold (excitation at 440 nm, emission at 560 nm), and 5.9-fold (excitation at 240 nm, emission at 560 nm), respectively. The FL probe was applied to the determination of Zn in a food supplement.     

A new fluorescent chemosensor for transition metal cations and on/off molecular switch controlled by pH

A new fluorescent chemosensor with imidazole as ionophore was synthesized by the selective derivation of calixarene, which can effectively recognize Cu²⁺ and Zn²⁺ leading to different fluoroscopic behaviors in CH₃OH-H₂O. This system could be considered as a molecular switch. By modulating the pH of the solution, on-off-on fluorescent switching is carried out upon combinatory addition of acid, base and Cu²⁺.     

Extensive computational study on coordination of transition metal cations and water molecules to glutamic acid

On the basis of the conformations of glutamic acid (Glu) and analysis of possible metal cation coordination and hydration modes, conformations of Glu metalated with transition metal cations (TMCs), Cu(+/2+), Zn(+/2+), and Fe(+/2+/3+) and hydrations of Glu-Cu(+/2+) and Glu-Zn(+/2+) complexes by up to three water molecules are determined by extensive computational searches. The BHandHLYP functional is chosen as the main computational method as its overall performance for treating the spin multiplicity of TMCs is similar to that of CCSD(T) and better than that of MP2 and B3LYP. All mono- and divalent TMCs prefer tridentate coordination to canonical Glu, while Fe(3+) favors a bidentate coordination to zwitterionic Glu. The ground state of Glu-Fe(+) is found to be a spin sextet. Metal ion affinities of Glu for the TMCs are determined, and an excellent agreement with the experiment for Cu(+) may be obtained if the entropic effect is properly accounted for. Effects of hydration on the stabilities of different Glu-Cu(+/2+)/Zn(+/2+) structures are discussed, and the hydration energies for up to three water molecules are obtained. For the global minimum to take the zwitterionic form, Glu-Zn(+) requires only monohydration, Glu-Zn(2+) needs to be trihydrated, while Glu-Cu(+/2) should be hydrated with four or more water molecules.     

Interaction studies between photochromic spiropyrans and transition metal cations: the curious case of copper

A series of four spiropyrans bearing different substituents on the indolic nitrogen were synthesized and their capability of binding mono and bivalent transition metal cations in solution was assessed via UV-visible absorption spectroscopy. All the compounds responded selectively to the presence of Cu(ii) ions producing intense absorption bands in the visible region of their spectra. Bidimensional (1)H-NMR and MALDI-TOF MS spectroscopies revealed the formation of SP dimers mediated by Cu(ii). This is the first example of cross-coupling mediated by copper(ii) in mild conditions causing the symmetric dimerization of spiropyran dyes.     

Complexation of crown ethers and heteroanalogs of 18-crown-6 with alkali and alkaline earth metal cations in dichloroethane

Data on the complexing ability of a series of crown ethers and heteroanalogs of 18-crown-6, containing S-, SO-, SO₂- and SONH fragments at the 1- and 10-positions of the macrocyclic ring, with Li, Na, K, Mg and Ba picrates in dichloroethane were obtained from the solubility of the salts in the presence of the crown compounds. It was found that 18-crown-6 is the best but the least selective ligand of all the picrates, while polyethers with SO- and SONH fragments show an appreciable selectivity toward Li⁺, and to a lesser extent, toward Mg⁺. The complexing ability of the disulfone ligand is inappreciable under the conditions studied. A 11 stoichiometry of the complexes has been found for the individual crown-picrate pairs.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 24, No. 2, pp. 191–196, March–April, 1988.     

Complexation of anion exchangers based on polyimines and allyl and epoxy compounds with transition metal cations

Complexation of polymeric anion exchangers with transition metals was studied by polarographic and potentiometric titration techniques.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 10, 2004, pp. 1693–1698.Original Russian Text Copyright © 2004 by Ergozhin, Chalov, Kovrigina, Iskakova, Nikitina.