The anodic behavior of gold in phosphoric acid at elevated temperatures

Summary The anodic dissolution of gold in concentrated phosphoric acid was investigated at 145–200°C. Gold dissolves in a narrow potential region (150 mV) about 300 mV positive to the oxygen potential in the same electrolyte. At higher potentials it passivates. At very high overvoltages dissolution, which increased rapidly with temperature, was also observed in the transpassive region. The product of the dissolution is finely divided gold, probably formed by immediate decomposition of the oxydation product. At 200°C, at which temperature pyrophosphoric acid is formed, the gold dissolution also yields a clear yellow solution of gold pyrophosphate

---

Zusammenfassung Die anodische Auflösung von Gold in konzentrierter Phosphorsäure wurde im Temperaturbereich von 145–200° C untersucht. Gold geht in Lösung in einem engen Potentialintervall (150 mV) etwa 300 mV positiver als das Sauerstoffpotential im gleichen Elektrolyten. Bei höheren Potentialen wird es passiv. Bei sehr hohen Überspannungen wurde auch im transpassiven Bereich Auflösung beobachtet, deren Geschwindigkeit mit der Temperatur stark ansteigt. Bei der Auflösung entsteht fein verteiltes Gold, vermutlich durch unmittelbar folgende Zersetzung des Oxydationsproduktes. Bei 200° C, wo Pyrophosphorsäure gebildet wird, ergibt die Goldauflösung auch eine klare gelbe Lösung von Goldpyrophosphat.

---

---

Dedicated to Prof. Dr. M. v. Stackelberg on his 70th birthday.     

Electrocatalytic activity of three-dimensional monolayer of 3-mercaptopropionic acid assembled on gold nanoparticle arrays

3-Mercaptopropionic acid (MPA) was assembled on gold nanoparticle arrays to form three-dimensional monolayer. The electrochemical behavior of small biomolecules such as NADH, ascorbic acid (AA), uric acid (UA) and dopamine (DA) on the as-prepared three-dimensional monolayer was studied. The cyclic voltammetric results indicated that three-dimensional MPA monolayer promoted the electron transfer between NADH and electrode, which was similar to two-dimensional MPA monolayer assembled on planar gold electrode. However, to the electrooxidation of AA, although two-dimensional MPA monolayer exhibited a blocking effect, three-dimensional MPA monolayer showed an obvious promotion. The catalytic activity of three-dimensional MPA monolayer towards UA and DA was also observed, which was attributed to its three-dimensional structure that might effectively prevent the poison of the electrode surface by the oxidation products.     

DNA dissociation and degradation at gold nanoparticle surfaces

The instability of DNA-functionalized gold nanoparticles (Au-DNA conjugates) upon exposure to high temperatures is characterized using fluorescence spectroscopy, gel electrophoresis and ion-exchange chromatography. Above 70 °C, aqueous Au-DNA conjugates decompose within hours due to both desorption of thiol-terminated DNA from the gold nanoparticle surface and chemical degradation of DNA in the presence of colloidal gold. Although the chemical mechanism for DNA degradation was not identified in this study, the gold surface participates directly in the cleavage reaction. These results have important implications for the use of Au-DNA conjugates in biotechnological and clinical applications that require high temperatures, such as polymerase chain reaction (PCR).     

Photothermal patterning of microgel/gold nanoparticle composite colloidal crystals

We present a new method for laser direct writing in self-assembled hydrogel microparticle colloidal crystals via photothermal excitation of co-assembled colloidal Au particles. Close-packed colloidal crystals are assembled from approximately 224 nm diameter, thermoresponsive, poly-N-isopropylacrylamide hydrogel microparticles (microgels); these crystals display sharp Bragg diffraction peaks in the mid-visible region of the spectrum due to the periodic dielectric function of the assembly. Raising the temperature of the crystal above the characteristic volume phase transition temperature of the microgel particles results in a reversible melting of the crystalline material due to the particle-based deswelling event. This transition can be used either to anneal defects from the crystalline material or to controllably and reversibly convert the assembly from the colored, crystalline state to a nondiffracting glassy material. Crystal-to-glass transitions are similarly accomplished via photothermal excitation when 16 nm diameter colloidal Au particles are co-assembled with the responsive microgels. Excitation of the colloidal Au plasmon absorption with a frequency doubled Nd:YAG laser (lambda = 532 nm) results in optically directed conversion of either glasses to crystals or crystals to glasses, depending on the initial state of the assembly and the illumination time. These results represent a fundamentally new method for the patterning of self-assembled photonic materials.     

墨鱼骨有机质与纳米金复合膜光学传感器的构建及其应用

利用纳米金种法制备墨鱼骨有机质纳米金复合膜(CDMS/AuNPs),构建一种有机质复合纳米材料的光学传感器。采用扫描电镜(SEM)和紫外-可见吸收光谱对复合膜的结构和光学性质进行表征。根据金纳米颗粒(AuNPs)的局域表面等离子体共振(LSPR)效应,利用亚硝酸盐还原氯金酸诱导纳米金种生长,进而应用于亚硝酸盐的检测。在优化实验条件下,CDMS/AuNPs传感器的吸光度与亚硝酸盐的浓度在2.5×10-6～5.0×10-5mol/L范围内呈良好的线性关系(R=0.9950),检出限为8.0×10-7 mol/L(S/N=3)。     

Dynamic response of gold nanoparticle chemiresistors to organic analytes in aqueous solution

We investigate the response dynamics of 1-hexanethiol-functionalized gold nanoparticle chemiresistors exposed to the analyte octane in aqueous solution. The dynamic response is studied as a function of the analyte-water flow velocity, the thickness of the gold nanoparticle film and the analyte concentration. A theoretical model for analyte limited mass-transport is used to model the analyte diffusion into the film, the partitioning of the analyte into the 1-hexanethiol capping layers and the subsequent swelling of the film. The degree of swelling is then used to calculate the increase of the electron tunnel resistance between adjacent nanoparticles which determines the resistance change of the film. In particular, the effect of the nonlinear relationship between resistance and swelling on the dynamic response is investigated at high analyte concentration. Good agreement between experiment and the theoretical model is achieved.     

The uptake of strontium by calcium phosphate phase formed at an elevated pH

The sorption of radioactive strontium by poorly crystalline hydroxyapatite (HA) obtained by the transformation of amorphous calcium phosphate (ACP) at initial pH 10.8, was investigated. Morphological analysis, performed by transmission electron microscopy, has demonstrated that the solid phase consists of nanometer size ultra-micro particles connected into spherical aggregates. A maximum sorption capacity, determined as the asymptote of the sorption isotherm was =(3.8±0.3)·10^–2mol Sr/mol P. Based on this result and the structural conditions, a possible theoretical explanation for the incorporation of a strontium ion into the apatite lattice has been proposed.     

Adsorption of organic acids on TiO2 nanoparticles: effects of pH, nanoparticle size, and nanoparticle aggregation

In this study, the adsorption of two organic acids, oxalic acid and adipic acid, on TiO2 nanoparticles was investigated at room temperature, 298 K. Solution-phase measurements were used to quantify the extent and reversibility of oxalic acid and adipic acid adsorption on anatase nanoparticles with primary particle sizes of 5 and 32 nm. At all pH values considered, there were minimal differences in measured Langmuir adsorption constants, K ads, or surface-area-normalized maximum adsorbate-surface coverages, Gamma max, between 5 and 32 nm particles. Although macroscopic differences in the reactivity of these organic acids as a function of nanoparticle size were not observed, ATR-FTIR spectroscopy showed some distinct differences in the absorption bands present for oxalic acid adsorbed on 5 nm particles compared to 32 nm particles, suggesting different adsorption sites or a different distribution of adsorption sites for oxalic acid on the 5 nm particles. These results illustrate that molecular-level differences in nanoparticle reactivity can still exist even when macroscopic differences are not observed from solution phase measurements. Our results also allowed the impact of nanoparticle aggregation on acid uptake to be assessed. It is clear that particle aggregation occurs at all pH values and that organic acids can destabilize nanoparticle suspensions. Furthermore, 5 nm particles can form larger aggregates compared to 32 nm particles under the same conditions of pH and solid concentrations. The relative reactivity of 5 and 32 nm particles as determined from Langmuir adsorption parameters did not appear to vary greatly despite differences that occur in nanoparticle aggregation for these two different size nanoparticles. Although this potentially suggests that aggregation does not impact organic acid uptake on anatase particles, these data clearly show that challenges remain in assessing the available surface area for adsorption in nanoparticle aqueous suspensions because of aggregation.     

Modification of gold nanoparticle composite nanostructures using thermosensitive core-shell particles as a template

We report the formation of novel thermosensitive hybrid core-shell particles via in situ synthesis of gold nanoparticles using thermosensitive core-shell particles as a template. The template core-shell particles, with cores composed mainly of poly(glycidyl methacrylate) (GMA) and shells composed mainly of poly(N-isopropylacrylamide) (PNIPAM), were synthesized in aqueous medium, and functional groups such as thiol groups were incorporated into each particle. We found that these particles containing thiol groups were effective for the in situ synthesis of gold nanoparticles in long-term storage. The obtained hybrid particles exhibited a reversible color change from red to purple, which originated from the surface plasmon resonance of gold nanoparticles and which was temperature-dependent in the range of 25-40 degrees C. In addition to their thermosensitive property, the hybrid particles exhibited the unique characteristic of uniform distribution on a solid substrate. The particles obtained by this approach have potential thermosensitive applications such as in sensors and photonic or electronic devices.     

Responsive polymer/gold nanoparticle composite thin films fabricated by solvent-induced self-assembly and spin-coating

Self-assembled poly(4-vinylpyridine)-grafted gold (Au) nanoparticles (NPs) and polystyrene-b-poly(4-vinylpyridine) block copolymers were fabricated by the introduction of a selective solvent to a common solution. The assembled mixtures were spin-coated onto solid substrates to fabricate composite gold/polymer thin films composed of copolymer-hybridized Au NPs and independent copolymer micelles. The obtained composite Au thin films had variable localized surface plasmon resonance (LSPR) bands and microscopic morphologies upon vapor annealing with selective solvents because the adsorption and dissolving of solvent molecules into the films could rearrange the copolymer block. The hybrid nanostructured Au thin films may have potential in vapor sensing and organic assays.     

Simultaneous voltammetric determination of ascorbic acid and dopamine at the surface of electrodes modified with self-assembled gold nanoparticle films

Gold nanoparticles (GNs) could be efficiently immobilized on binary mixed self-assembled monolayers (SAMs) on a gold surface composed of 1,6-hexanedithiol and 1-octanethiol (nano-Au/SAMs gold electrode). This GN chemically modified electrode was used for electrochemical determination of ascorbic acid (AA) and dopamine (DA) in aqueous media. The result showed that the GN-modified electrode could clearly resolve the oxidation peaks of AA and DA, with a peak-to-peak separation (∆E _p) of 110 mV enabling determination of AA and DA in the presence of each other. The linear analytical curves were obtained in the ranges of 0.3–1.4 mM for AA and 0.2–1.2 mM for DA concentrations using differential pulse voltammetry. The detection limits (3σ) were 9.0 × 10⁻⁵ M for AA and 9.0 × 10⁻⁵ M for DA.     

Retention of enzymatic activity of alpha-amylase in the reductive synthesis of gold nanoparticles

In this paper, we report the generation of Au nanoparticles (NPs), using a pure enzyme for the reduction of AuCl4(-), with the retention of enzymatic activity in the complex. As a model system, alpha-amylase was used to readily synthesize and stabilize Au NPs in aqueous solution. Although several other enzymes were also pursued for the synthesis, it was interesting to observe that only alpha-amylase and EcoRI could produce Au NPs. Following NP synthesis, the activity of the enzyme was retained in the Au NP-alpha-amylase complex. The presence of Au NPs and alpha-amylase in the complex was established by UV-visible and FT-IR spectroscopy, X-ray diffraction (XRD) and transmission electron microscopic (TEM) measurements. Our observations suggest that the presence of free and exposed S-H groups is essential in the reduction of AuCl4(-) to Au NPs. Structural analysis of the enzymes showed that both alpha-amylase and EcoRI enzymes have free and exposed S-H groups in their native form and thus are suitable for the generation of NPs, whereas the other ones used here do not have such groups. Fortuitously, the enzymatic functional group of alpha-amylase is positioned opposite to that of the free and exposed S-H group, which makes it ideal for the production of Au NPs; binding of the enzyme to Au NPs via Au-S bond and also retention of the biological activity of the enzyme.     

Temperature and pH studies of short tandem repeat systems using capillary electrophoresis at elevated pH

The DNA secondary structure can affect the migration time and precision of DNA separations in the physical gels used in capillary electrophoresis (CE). To counteract these effects, DNA typing is performed using elevated temperatures (60 degrees C) and high concentrations (7 M) of urea. These conditions affect the precision and lifetime of the analysis. To better understand the effects of these conditions on the reproducibility of DNA migration, we examined the effects of temperature and pH on short tandem repeat (STR) analysis using the PE/ABI 310 Genetic Analyzer. Separations were performed using the Profiler + multiplex system, a set of coamplified STRs with a 4-base repeat motif, labeled at the 5'-end using fluorescent dyes. The analytical separations were obtained using a commercial buffer at pH 8 and an experimental buffer consisting of 3% hydroxyethylcellulose at pH settings ranging from 8-12. Multichannel laser-induced fluorescence detection was used. Temperatures were examined from 30-70 degrees C. The results demonstrate the fact that highly efficient separations can be carried out at alkaline pH. In addition, improvements in temperature stability were seen when compared to results at lower pH. However, high concentrations of urea were found to be necessary to achieve optimal resolution.     

Blue emitting gold nanoclusters templated by poly-cytosine DNA at low pH and poly-adenine DNA at neutral pH

Blue fluorescent gold nanoclusters were prepared in the presence of poly-cytosine DNAs at low pH and poly-adenine at neutral pH using citrate as the reducing agent; various buffer conditions affecting the synthesis have been explored.     

Molecular ordering and 2D conductivity in ultrathin poly(3-hexylthiophene)/gold nanoparticle composite films

This paper reports the first comparison of the structure and electrical conductivity properties of spin cast (SC) and Langmuir-Schaeffer (LS) films of regioregular poly(3-hexylthiophene) (P3HT). In addition, the effect of incorporating highly monodisperse Au nanoparticles (NPs), with a core diameter of approximately 5 nm, into SC and LS P3HT films is described. A detailed picture of molecular organization in the films has been obtained using ultraviolet-visible absorption spectroscopy, atomic force microscopy, field-emission scanning electron microscopy, X-ray diffraction, and X-ray reflectivity. Film morphology was correlated with pseudo-two-dimensional conductivity measured using scanning electrochemical microscopy, with P3HT in the semiconducting regime. It was found that SC films, which were slightly thicker than those formed with the LS technique, exhibited greater organization. This resulted in an order of magnitude higher lateral conductivity for the SC films. Inclusion of Au NPs (50 wt %) into both SC and LS films resulted in the formation of uniform and relatively flat (rms roughness approximately 1 nm) composite films. Surprisingly, the addition of NPs did not disrupt the characteristic crystal structure found for the native P3HT films. The effect of Au NPs on film lateral conductivity was found to be determined by the distribution of Au NPs within the polymer, which varied significantly between SC and LS films. Whereas Au NPs aggregated into hexagonally packed clusters in SC films, NPs in LS films were predominantly uniformly distributed between the lamella bilayer. It was found that, while the inclusion of Au NPs caused the lateral conductivity to decrease in SC films, in LS films, the lateral conductivity increased by a factor of 2.     

Core-satellites assembly of silver nanoparticles on a single gold nanoparticle via metal ion-mediated complex

We report core-satellites (Au-Ag) coupled plasmonic nanoassemblies based on bottom-up, high-density assembly of molecular-scale silver nanoparticles on a single gold nanoparticle surface, and demonstrate direct observation and quantification of enhanced plasmon coupling (i.e., intensity amplification and apparent spectra shift) in a single particle level. We also explore metal ion sensing capability based on our coupled plasmonic core-satellites, which enabled at least 1000 times better detection limit as compared to that of a single plasmonic nanoparticle. Our results demonstrate and suggest substantial promise for the development of coupled plasmonic nanostructures for ultrasensitive detection of various biological and chemical analytes.