Microphase separation in a mixture of ionic and nonionic liquids

We use a Flory-Huggins type approach and the random phase approximation (RPA) to describe a microphase separation in the mixture of ionic and nonionic liquids. The mixture is modeled as a "three-component" system including anions, cations, and neutral molecules. Each ion is considered to consist of a charged group surrounded by a neutral "bulky" shell. The shells of the anion and cation are assumed to have different affinities to the neutral molecules. We show that, if the difference of the Flory-Huggins parameters describing affinities of the anions and cations to the neutral molecules is higher than a certain value, the microphase separation can occur. The physical reason for the separation is a delicate balance between the short-range segregating interactions and the long-range Coulomb interactions.     

Interface between ionic and nonionic liquids: theoretical study

We use a Flory-Huggins type approach to calculate the structure and the surface tension coefficient of the boundary between ionic and nonionic liquids. The mixture of ionic and nonionic liquids is treated as a "three-component" system including anions, cations, and neutral molecules. We show that if the affinities of the cations and the anions to the neutral molecules are different, the interface comprises an electric double layer. The presence of this layer (uncompensated electric field) stabilizes the interface: the field inhibits the ions segregation at the interface and increases the surface tension. On the other hand, the short-range volume interactions promote the segregation and decrease the surface tension. Furthermore, the surface tension coefficient can be negative, if the difference of the affinities is high enough. It implies a possibility of microphase separation of the system.     

Alkali cation extraction by calix[4]crown-6 to room-temperature ionic liquids. The effect of solvent anion and humidity investigated by molecular dynamics simulations

We report a molecular dynamics study on the solvation of M+ (Na+ to Cs+) alkali cations and of their LM+ complexes with a calix[4]arene host (L = 1,3-dimethoxy-calix[4]arene-crown-6 in the 1,3-alternate conformation) in the [BMI][PF6] and [BMI][Tf2N] room-temperature ionic liquids "ILs" based on the BMI+ (1-butyl-3-methylimidazolium) cation. The comparison of the two liquids and the dry versus humid form of the former one (with a 1:1 ratio of H2O and BMI+PF6- species) reveals the importance of humidity: in [BMI][PF6]-dry as in the [BMI][Tf2N] liquid, the first solvation shell of the "naked" M+ ions is composed of solvent anions only (four PF6- anions, and from four to five Tf2N- anions, respectively, quasi-neutralized by a surrounding cage of BMI+ cations), while in the [BMI][PF6]-humid IL, it comprises from one to three solvent anions and about four H2O molecules. In the LM+ complexes, the cation is shielded from solvent, but still somewhat interacts with a solvent anion in the dry ILs and with water in the humid IL. We also report tests on M+ interactions with solvent anions PF6- and Tf2N- in the gas phase, showing that the AMBER results are in satisfactory agreement with QM results obtained at different levels of theory. The question of ion recognition by L is then examined by free energy perturbation studies in the three liquids, predicting a high Cs+/Na+ selectivity upon liquid extraction from an aqueous phase, in agreement with experimental results on a parent calixarene host. A similar Cs+/Na+ selectivity is predicted upon complexation in a homogeneous IL phase, mainly due to the desolvation energy of the free cations. Thus, despite their polar character, ionic liquids qualitatively behave as classical weakly polar organic liquids (e.g., choroform) as far as liquid-liquid extraction is concerned but more like polar liquids (water, alcohols) as far as complexation in a single phase is concerned.     

Toward electron encapsulation: polynitrile approach

This study seeks an answer to the following question: Is it possible to design a supramolecular cage that would "solvate" the excess electron in the same fashion in which several solvent molecules do that cooperatively in polar liquids? Two general strategies are outlined for this "electron encapsulation", viz. electron localization using polar groups arranged on the (i) inside of the cage or (ii) outside of the cage. The second approach is more convenient from the synthetic standpoint, but it is limited to polynitriles. We demonstrate, experimentally and theoretically, that this second approach faces a problem: the electron attaches to the nitrile groups, forming molecular anions with bent C-C-N fragments. Because the energy cost of this bending is high, for dinitrile anions in n-hexane, the binding energies for the electron are low and, for mononitriles, these binding energies are lower still, and the entropy of electron attachment is anomalously small. Density functional theory modeling of electron trapping by mononitriles in n-hexane suggests that the solute molecules substitute for the solvent molecules at the electron cavity, "solvating" the electron by their methyl groups. We argue that such species would be more correctly viewed as multimer radical anions in which the electron density is shared (mainly) between C 2p orbitals in the solute/solvent molecules, rather than cavity electrons. The way in which the excess electron density is shared by such molecules is similar to the way in which this sharing occurs in large di- and polynitrile anions, such as 1,2,4,5,7,8,10,11-octacyanocyclododecane(-). Only in this sense is the electron encapsulation possible. The work thus reveals limitations of the concept of "solvated electron" for organic liquids: it is impossible to draw a clear line between such species and a certain class of radical anions.     

Binary Mixtures of Aprotic and Protic Ionic Liquids Demonstrate Synergistic Polarity Effect: An Unusual Observation

In this communication, we demonstrate the solute–solvent and solvent–solvent interactions in the binary mixtures of two aprotic ionic liquids, namely 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide and 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, with the protic ionic liquid 1-methylimidazolium acetate. The synergistic effects as expressed by the solvatochromic parameter are noted. This observation is in contrast to the mixing of protic ionic liquids 1-methylpyrrolidium acetate and 4-methylmorpholine acetate with 1-methylimidazolium acetate, respectively. It appears that the synergistic effects in the binary mixtures of aprotic and protic ionic liquids are caused by the formation of hydrogen bonds, since cations are dominant H-bond donors while anions are dominant H-bond acceptors. Preferential solvation models are used to describe the solute–solvent interactions in the binary ionic liquid mixtures.     

Unique spatial heterogeneity in ionic liquids

A multiscale coarse-graining model for ionic liquids has been extended to investigate the unique aggregation of cations in ionic liquids through computer simulation. It has been found that, with sufficiently long side chains, the tail groups of cations aggregate to form spatially heterogeneous domains, while headgroups of the cations and the anions distribute as uniformly as possible. This is understood as the result of competition between the charged electrostatic interactions between headgroups and anions and the collective short-range interactions between the neutral tail groups. This aggregation can help to explain a number of experimentally observed physical phenomena in ionic liquids.     

A molecular dynamics computer simulation study of room-temperature ionic liquids. I. Equilibrium solvation structure and free energetics

Solvation in 1-ethyl-3-methylmidazolium chloride and in 1-ethyl-3-methylimidazolium hexafluorophosphate near equilibrium is investigated via molecular dynamics computer simulations with diatomic and benzenelike molecules employed as probe solutes. It is found that electrostriction plays an important role in both solvation structure and free energetics. The angular and radial distributions of cations and anions become more structured and their densities near the solute become enhanced as the solute charge separation grows. Due to the enhancement in structural rigidity induced by electrostriction, the force constant associated with solvent configuration fluctuations relevant to charge shift and transfer processes is also found to increase. The effective polarity and reorganization free energies of these ionic liquids are analyzed and compared with those of highly polar acetonitrile. Their screening behavior of electric charges is also investigated.     

The study of structure formation in a polymer-containing ionic liquid in terms of the integral equation theory

The structural properties of a polymer-containing ionic liquid under the conditions of good solubility of a flexible polymer are studied theoretically. Two systems are discussed: In one, polymer solubility is due to the presence of specific interaction between polymer chains and solvent cations; in the other, polymer solubility is due to the presence of specific interactions between the polymer and solvent anions. The dependences of the structural characteristics of a solution on the polymer concentration and the energy of attraction between polymer chains and solvent ions are calculated. In a semidilute polymer solution, long-range correlations of polymer chains with a power dependence of the characteristic scale of ordering on the polymer density appear. The conditions under which, along with the intermediate ordering typical of a pure ionic liquid, the long-range ordering of the solvent cations and anions occur after addition of a polymer to the ionic liquid are studied.     

The influence of hydrogen bonding on the physical properties of ionic liquids

Potential applications of ionic liquids depend on the properties of this class of liquid material. To a large extent the structure and properties of these Coulomb systems are determined by the intermolecular interactions among anions and cations. In particular the subtle balance between Coulomb forces, hydrogen bonds and dispersion forces is of great importance for the understanding of ionic liquids. The purpose of the present paper is to answer three questions: Do hydrogen bonds exist in these Coulomb fluids? To what extent do hydrogen bonds contribute to the overall interaction between anions and cations? And finally, are hydrogen bonds important for the physical properties of ionic liquids? All these questions are addressed by using a suitable combination of experimental and theoretical methods including newly synthesized imidazolium-based ionic liquids, far infrared spectroscopy, terahertz spectroscopy, DFT calculations, differential scanning calorimetry (DSC), viscometry and quartz-crystal-microbalance measurements. The key statement is that although ionic liquids consist solely of anions and cations and Coulomb forces are the dominating interaction, local and directional interaction such as hydrogen bonding has significant influence on the structure and properties of ionic liquids. This is demonstrated for the case of melting points, viscosities and enthalpies of vaporization. As a consequence, a variety of important properties can be tuned towards a larger working temperature range, finally expanding the range of potential applications.     

Solution states of cellulose in selected direct dissolution agents

Properties of cellulose solutions in different direct dissolving liquids such as N-methylmorpholine-N-oxide and ionic liquids with varied cations and anions were investigated. The effects of different cations and anions of the used ionic liquids on the solution state were studied on the basis of the rheological characteristics of the resulting polymer solutions. The influence of these components is discussed in terms of zero shear viscosities, master curves with storage and loss moduli as well as complex viscosities using comparable molar ratios between cellulose and solvent and comparable polymer concentrations. Furthermore anisotropic properties of highly concentrated cellulose solutions were determined by means of polarised light microscopy and rheological methods subjected to the used solvent and variation of the polymer concentration as well as the temperature.     

Effect of ionic solutes on the hydrogen bond network dynamics of water: power spectral analysis of aqueous NaCl solutions

To understand the modifications of the hydrogen bond network of water by ionic solutes, power spectra as well as static distributions of the potential energies of tagged solvent molecules and solute ions have been computed from molecular dynamics simulations of aqueous NaCl solutions. The key power spectral features of interest are the presence of high-frequency peaks due to localized vibrational modes, the existence of a multiple time scale or 1/falpha frequency regime characteristic of networked liquids, and the frequency of crossover from 1/falpha type behavior to white noise. Hydrophilic solutes, such as the sodium cation and the chloride anion, are shown to mirror the multiple time scale behavior of the hydrogen bond network fluctuations, unlike hydrophobic solutes which display essentially white noise spectra. While the power spectra associated with tagged H2O molecules are not very sensitive to concentration in the intermediate frequency 1/falpha regime, the crossover to white noise is shifted to lower frequencies on going from pure solvent to aqueous alkali halide solutions. This suggests that new and relatively slow time scales enter the picture, possibly associated with processes such as migration of water molecules from the hydration shell to the bulk or conversion of contact ion pairs into solvent-separated ion pairs which translate into variations in equilibrium transport properties of salt solutions with concentration. For anions, cations, and solvent molecules, the trends in the alpha exponents of the multiple time scale region and the self-diffusivities are found to be strongly correlated.     

核磁共振波谱技术在室温离子液体研究中的应用*

室温离子液体作为一种绿色溶剂和功能材料,越来越引起人们的重视,其研究手段也越来越多。本文着重概述了核磁共振方法在测定离子液体的结构、纯度及性质,研究离子液体阴阳离子间的相互作用、离子液体与其他化合物的相互作用、离子液体及其在混合体系中的动力学特征、离子液体在溶液中的聚集行为,以及测定离子液体的热力学参数中的应用。     

Dispersion and Hydrogen Bonding Rule: Why the Vaporization Enthalpies of Aprotic Ionic Liquids Are Significantly Larger than those of Protic Ionic liquids

It is well known that gas‐phase experiments and computational methods point to the dominance of dispersion forces in the molecular association of hydrocarbons. Estimates or even quantification of these weak forces are complicated due to solvent effects in solution. The dissection of interaction energies and quantification of dispersion interactions is particularly challenging for polar systems such as ionic liquids (ILs) which are characterized by a subtle balance between Coulomb interactions, hydrogen bonding, and dispersion forces. Here, we have used vaporization enthalpies, far‐infrared spectroscopy, and dispersion‐corrected calculations to dissect the interaction energies between cations and anions in aprotic (AILs), and protic (PILs) ionic liquids. It was found that the higher total interaction energy in PILs results from the strong and directional hydrogen bonds between cation and anion, whereas the larger vaporization enthalpies of AILs clearly arise from increasing dispersion forces between ion pairs.     

Stability of ion triplets in ionic liquid/lithium salt solutions: Insights from implicit and explicit solvent models and molecular dynamics simulations

Binding energies of ion triplets formed in ionic liquids by Li⁺ with two anions have been studied using quantum‐chemical calculations with implicit and explicit solvent supplemented by molecular dynamics (MD) simulations. Explicit solvent approach confirms variation of solute‐ionic liquid interactions at distances up to 2 nm, resulting from structure of solvation shells induced by electric field of the solute. Binding energies computed in explicit solvent and from the polarizable continuum model approach differ largely, even in sign, but relative values generally agree between these two models. Stabilities of ion triplets obtained in quantum‐chemical calculations for some systems disagree with MD results; the discrepancy is attributed to the difference between static optimized geometries used in quantum chemical modeling and dynamic structures of triplets in MD simulations. © 2015 Wiley Periodicals, Inc.     

Identification of 1,3-dialkylimidazolium salt supramolecular aggregates in solution

The nature of the interactions between 1,3-dialkylimidazolium cations and noncoordinating anions such as tetrafluoroborate, hexafluorophosphate, and tetraphenylborate has been studied in the solid state by X-ray diffraction analysis and in solution by (1)H NMR spectroscopy, conductivity, and microcalorimetry. In the solid state, these compounds show an extended network of hydrogen-bonded cations and anions in which one cation is surrounded by at least three anions and one anion is surrounded by at least three imidazolium cations. In the pure form, imidazolium salts are better described as polymeric supramolecules of the type {[(DAI)(3)(X)](2+)[(DAI)(X)(3)](2-)}(n) (where DAI is the dialkylimidazolium cation and X is the anion) formed through hydrogen bonds of the imidazolium cation with the anion. In solution, this supramolecular structural organization is maintained to a great extent, at least in solvents of low dielectric constant, indicating that mixtures of imidazolium ionic liquids with other molecules can be considered as nanostructured materials. This model is very useful for the rationalization of the majority of the unusual behavior of the ionic liquids.     

Properties of Apolar Solutes in Alkyl Imidazolium‐Based Ionic Liquids: The Importance of Local Interactions

The solvation and the dynamic properties of apolar model solutes in alkyl imidazolium‐based ionic liquids (IL) are studied by using all‐atom molecular dynamics simulations. In regards to specific IL effects, we focused on the often used 1‐ethyl‐3‐methyl imidazolium cation in combination with the anions tetrafluoroborate, acetate, and bis(trifluoromethanesulfonyl)imide. Our findings reveal that the size of the anion crucially influences the accumulation behavior of the cations, which results in modified IL solvation properties. Deviations between the different alkyl imidazolium‐based IL combinations can be also observed with regard to the results for the radial distribution functions, the number of surrounding molecules, and the molecular orientation. The analysis of the van Hove function further shows pronounced differences in the dynamic behavior of the solutes. The simulations verify that the solute mobilities are mainly influenced by the composition of the local solvent shell and the properties of the underlying Lennard–Jones interactions. Additional simulations with regard to modified short‐range dispersion energies for alkyl imidazolium‐based ILs validate our conclusions.     

On the different roles of anions and cations in the solvation of enzymes in ionic liquids

The solvation of the enzyme Candida antarctica lipase B (CAL-B) was studied in eight different ionic liquids (ILs). The influence of enzyme-ion interactions on the solvation of CAL-B and the structure of the enzyme-IL interface are analyzed. CAL-B and ILs are described with molecular dynamics (MD) simulations in combination with an atomistic empirical force field. The considered cations are based on imidazolium or guanidinium that are paired with nitrate, tetrafluoroborate or hexafluorophosphate anions. The interactions of CAL-B with ILs are dominated by Coulomb interactions with anions, while the second largest contribution stems from van der Waals interactions with cations. The enzyme-ion interaction strength is determined by the ion size and the magnitude of the ion surface charge. The solvation of CAL-B in ILs is unfavorable compared to water because of large formation energies for the CAL-B solute cages in ILs. The internal energy in the IL and of CAL-B increases linearly with the enzyme-ion interaction strength. The average electrostatic potential on the surface of CAL-B is larger in ILs than in water, due to a weaker screening of charged enzyme residues. Ion densities increased moderately in the vicinity of charged residues and decreased close to non-polar residues. An aggregation of long alkyl chains close to non-polar regions and the active site entrance of CAL-B are observed in one IL that involved long non-polar decyl groups. In ILs that contain 1-butyl-3-methylimidazolium cations, the diffusion of one or two cations into the active site of CAL-B occurs during MD simulations. This suggests a possible obstruction of the active site in these ILs. Overall, the results indicate that small ions lead to a stronger electrostatic screening within the solvent and stronger interactions with the enzyme. Also a large ion surface charge, when more hydrophilic ions are used, increases enzyme-IL interactions. An increase of these interactions destabilizes the enzyme and impedes enzyme solvation due to an increase in solute cage formation energies.