Kinetics and mechanism of the reaction of manganese(III) octaethylporphine with hydrogen peroxide

A spectroscopic and kinetic study of the oxidation of (chloro)(octaethylporphinato)manganese(III) (Cl)MnOEP with hydrogen peroxide in an aqueous-organic medium at 288–308 K was made. The nature and composition of the reaction products differ depending on the reaction conditions (H₂O₂ concentration). Based on the data on reaction rates, thermodynamic parameters of activation, and form of the rate equations of the (C1)MnOEP oxidation, a multistep reaction mechanism is suggested and substantiated, in which the decisive role is played by the limiting step, two-electron oxidation of the metal porphyrin with the coordinated peroxide or partial reduction of the oxidized form of the manganese porphyrin with the second peroxide molecule (in the form of HO ₂ ^? ), and by acid-base equilibria of the peroxide.     

Synthesis,characterization, electrochemical behaviour and catalytic activity of manganese(II) complexes with linear and tripodal tetradentate ligands derived from Schiff bases

New manganese(II) complexes, [Mn(H₂L)(H₂O)₂]Cl₂· xH₂O, with linear and tripodal tetradentate ligands have been synthesized and characterized by elemental analysis, molar conductance, i.r. spectra, magnetic measurements and electronic and e.s.r. spectra. The data show that the ligands are neutral and coordinate to manganese in a tetradentate manner; the other axial sites are occupied by the water molecules. Magnetic and e.s.r. data show that manganese(II) adopts a high-spin configuration in the complexes. The electrochemical behaviour of the complexes, determined by cyclic voltammetry, shows that the chelate structure, ligand geometry and electron donating effect of the ligand substituents are among the factors influencing the redox potentials of the complexes. In addition, we note that linear ligands stabilize the manganese(III) state to a greater extent than tripodal ligands and their complexes vigorously catalyse the disproportionation of hydrogen peroxide in the presence of added imidazole.     

Kinetics and mechanism of decomposition of hydrogen peroxide in the presence of manganese(III) porphyrins

The kinetics of homogeneous decomposition of hydrogen peroxide in the presence of manganese complexes with anionic ligands and various aromatic macrocycles were studied by the volumetric method. Ionmolecular mechanism was proposed on the basis of spectrophotometric data for catalytic decomposition of hydrogen peroxide with participation of manganese(III) porphyrins. The catalytic activity of the porphyrin complexes was higher by a factor of 1.5–3 than the activity of the corresponding solvate complexes with anionic ligands. The catalytic activity of porphyrin manganese complexes can be controlled by variation of the electronic structure of the macroring and the nature of anionic ligand coordinated at the apical position.     

A novel manganese(III)-peroxo complex bearing a proline-derived pentadentate aminobenzimidazole ligand

A novel nonheme manganese(III)-peroxo complex bearing a proline-derived pentadentate aminobenzimidazole ligand was synthesized and spectroscopically characterized, and its reactivity in aldehyde deformylation was investigated.     

Synthesis and structural characterization of manganese(III,IV) and ruthenium(III) complexes derived from 2-hydroxy-1-naphthaldehydebenzoylhydrazone

Reaction of 2-hydroxy-1-naphthaldehydebenzoylhydrazone(napbhH₂) with manganese(II) acetate tetrahydrate and manganese(III) acetate dihydrate in methanol followed by addition of methanolic KOH in molar ratio (2 : 1 : 10) results in [Mn(IV)(napbh)₂] and [Mn(III)(napbh)(OH)(H₂O)], respectively. Activated ruthenium(III) chloride reacts with napbhH₂ in methanolic medium yielding [Ru(III)(napbhH)Cl(H₂O)]Cl. Replacement of aquo ligand by heterocyclic nitrogen donor in this complex has been observed when the reaction is carried out in presence of pyridine(py), 3-picoline(3-pic) or 4-picoline(4-pic). The molar conductance values in DMF (N,N-dimethyl formamide) of these complexes suggest non-electrolytic and 1 : 1 electrolytic nature for manganese and ruthenium complexes, respectively. Magnetic moment values of manganese complexes suggest Mn(III) and Mn(IV), however, ruthenium complexes are paramagnetic with one unpaired electron suggesting Ru(III). Electronic spectral studies suggest six coordinate metal ions in these complexes. IR spectra reveal that napbhH₂ coordinates in enol-form and keto-form to manganese and ruthenium metal ions in its complexes, respectively. ESR studies of the complexes are also reported.     

Kinetics and mechanisms of decomposition reaction of hydrogen peroxide in presence of metal complexes

Hydrogen peroxide was discovered in 1818 and has been used in bleaching for over a century [ 1 ]. H₂O₂ on its own is a relatively weak oxidant under mild conditions: It can achieve some oxidations unaided, but for the majority of applications it requires activation in one way or another. Some activation methods, e.g., Fenton's reagent, are almost as old [ 2 ]. However, by far the bulk of useful chemistry has been discovered in the last 50 years, and many catalytic methods are much more recent. Although the decomposition of hydrogen peroxide is often employed as a standard reaction to determine the catalytic activity of metal complexes and metal oxides [ 3 , 4 ], it has recently been extensively used in intrinsically clean processes and in end‐of‐pipe treatment of effluent of chemical industries [ 5 , 6 ]. Furthermore, the adoption of H₂O₂ as an alternative of current industrial oxidation processes offer environmental advantages, some of which are (1) replacement of stoichiometric metal oxidants, (2) replacement of halogens, (3) replacement or reduction of solvent usage, and (4) avoidance of salt by‐products. On the other hand, wasteful decomposition of hydrogen peroxide due to trace transition metals in wash water in the fabric bleach industry, was also recognized [ 7 ]. The low intrinsic reactivity of H₂O₂ is actually an advantage, in that a method can be chosen which selectively activates it to perform a given oxidation. There are three main active oxidants derived from hydrogen peroxide, depending on the nature of the activator; they are (1) inorganic oxidant systems, (2) active oxygen species, and (3) per oxygen intermediates. Two general types of mechanisms have been postulated for the decomposition of hydrogen peroxide in the presence of transition metal complexes. The first is the radical mechanism (outer sphere), which was proposed by Haber and Weiss for the Fe(III)‐H₂O₂ system [ 8 ]. The key features of this mechanism were the discrete formation of hydroxyl and hydroperoxy radicals, which can form a redox cycle with the Fe(II)/Fe(III) couple. The second is the peroxide complex mechanism, which was proposed by Kremer and Stein [ 9 ]. The significant difference in the peroxide complex mechanism is the two‐electron oxidation of Fe(III) to Fe(V) with the resulting breaking of the peroxide oxygen‐oxygen bond. It is our intention in this article to briefly summarize the kinetics as well as the mechanisms of the decomposition of hydrogen peroxide, homogeneously and heterogeneously, in the presence of transition metal complexes. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 643–666, 2000     

Albumin-conjugated corrole metal complexes: extremely simple yet very efficient biomimetic oxidation systems

An extremely simple biomimetic oxidation system, consisting of mixing metal complexes of amphiphilic corroles with serum albumins, utilizes hydrogen peroxide for asymmetric sulfoxidation in up to 74% ee. The albumin-conjugated manganese corroles also display catalase-like activity, and mechanistic evidence points toward oxidant-coordinated manganese(III) as the prime reaction intermediate.     

Synthesis and Investigation of Geometrical Isomerism of Trinitro(aminoacidato)amminecobaltate(III) Complex Salts

Synthesis of a new class of coordination compounds of cobalt(III) with amino acids (glycine, alanine, α-amino-butyric acid and norvaline), i.e., trinitro(aminoacidato)-amminecobaltate(III) salts, M[CoNH₃Am(NO₂)₃], is described. The synthesis consists in the action of amino acid alkali salts on the Erdmann salt or peripheral isomer of trinitrotriamminecobalt(III). The same compounds were also obtained by direct synthesis, i.e., by hydrogen peroxide oxidation of cobalt(II) to cobalt(III) in the presence of the corresponding ligands. The peripheral configuration of the complexes obtained was determined by chemical and physical methods (electronic and PMR spectroscopy). The compounds are intermediates formed in obtaining of dinitrobis(aminoacidato)cobaltate(III) salts by the reaction of amino acids with the Erdmann salt or peripheral isomer of trinitrotriamminecobalt(III).     

SYNTHESIS AND CHARACTERIZATION OF MANGANESE(III) HYDROXYL-CONTAINING SCHIFF-BASE COMPLEXES: [Mn(III)(Hvanpa)2(NCS)] AND [Mn(III)(Hvanpa)2]Cl · H2O (H2vanpa ˭ 1-(3-METHOXYSALICYLALDENEAMINO)-3-HYDROXYPROPANE)

Abstract

The manganese complexes, [Mn(III)(Hvanpa)₂(NCS)] (1) and [Mn(III)(Hvanpa)₂]Cl · H₂O (2), have been prepared and the crystal structure of complex 2 determined using X-ray crystallography. The monomeric complex has a six-coordinate octahedral geometry. The complex crystallizes in the triclinic space group P-1 with a = 11.446(5) Å, b = 12.782(6) Å, c = 9.023(3) Å, α = 93.92(3)°, β = 97.05(3)°, γ = 65.42(2)°, V = 1169.0(9) ų and Z = 2. The Mn-O and Mn-N distances in the equatorial plane are in agreement with those found for other manganese (III) Schiff-base complexes. In the axial direction, the Mn-O distances of 2.256(3) and 2.236(3) Å, respectively, are about 0.4 Å longer than those in the equatorial plane due to Jahn-Teller distortion at the d ⁴ manganese(III) center. In the crystal, each chloride ion is linked through hydrogen bonding with two hydrogen atoms from the coordinated hydroxyl groups at the apical site. The lattice water molecules also interact with the phenolic oxygen atoms through hydrogen bonding.     

Alkene epoxidation catalysed by binuclear manganese complexes

Binuclear manganese(II) complexes with macrocyclic ligands have been synthesized by template Schiff base condensation of diethylenetriamine and pentane-2,4-dione or 1,3-diphenyl-propane-1,3-dione. Catalytic epoxidation of simple olefins with hydrogen peroxide and t-BHP were studied using the above manganese complexes in the presence of a base. The influence of reaction temperature, the additive methanol and the cocatalyst had been investigated. The major products of the oxidations were the epoxides. The new manganese complexes showed significant catalytic activities for the epoxidation of alkenes using hydrogen peroxide as oxidant and ammonium acetate as cocatalyst.     

Functional zinc(II) phthalocyanines bearing Schiff base complexes as oxidation catalysts for bleaching systems

Oxidation catalysis is used to increase the performance of hydrogen peroxide in laundry bleach applications. Bleach catalysts provide cost‐effective, energy‐saving and environmentally friendly bleach systems yielding perfect stain removal at lower temperatures. This comparative study is based on the synthesis of bis[bis(salicylhydrazonephenoxy)manganese(III)] phthalocyaninatozinc(II) ( 2 ), bis[bis(salicylhydrazonephenoxy)cobalt(III)] phthalocyaninatozinc(II) ( 3 ) and bis[bis(salicylhydrazonephenoxy)iron(III)] phthalocyaninatozinc(II) ( 4 ) as tri‐nuclear complexes consisting of two Schiff base complexes substituting a zinc phthalocyanine. Complexion on the periphery to obtain complexes 2 , 3 , 4 was performed through the reaction of a Schiff base‐substituted phthalocyanine using MnCl₂?4H₂O, CoCl₂?6H₂O or FeCl₃?6H₂O salts in basic condition in dimethylformamide. Fourier transform infrared, ¹H NMR, ¹³C NMR, UV–visible, inductively coupled plasma optical emission and mass spectra were applied to characterize the prepared compounds. The bleach performances of the three phthalocyanine compounds 2 , 3 , 4 were examined by the degradation of morin as hydrophilic dye. The degradation progress in the presence of catalysts 2 , 3 , 4 /H₂O₂ combination in aqueous solution was investigated using an online spectrophotometric method. It was found that the catalysts 2 , 3 , 4 exhibited better bleaching performance at 25 °C than tetraactylethylethylenediamine as bleach activator used in powder detergent formulations for stain removal. Copyright © 2015 John Wiley & Sons, Ltd.     

Application of low-temperature rapid-scan techniques in the elucidation of inorganic reaction mechanisms

Reactions that occur too rapidly to be monitored by rapid reaction methods at temperatures at or close to ambient can be investigated kinetically by retarding their reaction rates employing very low temperatures. A selection of reactions studied by this approach (low-temperature stopped-flow spectrophotometry) is reported. Details of the reaction mechanisms have been revealed for peroxide activation involving iron(III) porphyrins and cytochrome P450, superoxide activation involving manganese(II) complexes and iron porphyrin complexes, and dioxygen activation and binding by model mono-, and dinuclear copper(I) complexes and dioxygen activation at mono-, and dinuclear non-heme iron complexes. A final section covers progress in unravelling the mechanism of carbon–hydrogen bond activation by platinum complexes.     

Interaction between peroxide ion and phenol group which are coordinated to the same iron(III) ion

We have prepared several new iron(III) complexes with ligands which contain a phenol group; these are tetradentate [(X-phpy)H, X and H(phpy) represent the substituents on the phenol ring and N,N-bis(2-pyridylmethyl)-N-(2-hydroxybenzyl)amine, respectively] and pentadentate ligands [(R-enph-X)H; R=ethyl(Et) or methyl(Me) derivative and H(Me-enph) denotes N,N-bis(2-pyridylmethyl)-N″-methyl-N″-(2″-hydroxyl-benzylamine)ethylenediamine] and have determined the crystal structures of Fe(phpy)Cl₂, Fe(5-NO₂-phpy)Cl₂, and Fe(Me-enph)ClPF₆, which are of a mononuclear six-coordinate iron(III) complex with coordination of one or two chloride ion(s). These compounds are highly colored (dark violet) due to the coordination of phenol group to an iron(III) atom. When hydrogen peroxide was added to the solution of the iron(III) complex, a color change occurs with bleaching of the violet color, indicating that oxidative degradation of the phenol moiety occurred in the ligand system. The bleaching of the violet color was also observed by the addition of t-butylhydroperoxide. The rate of the disappearance of the violet color is highly dependent on the substituent on the phenol ring; introduction of an electron-withdrawing group in the phenol ring decreases the rate of bleaching, suggesting that disappearance of the violet band should be due to a chemical reaction between the phenol group and a peroxide adduct of the iron(III) species with an η¹-coordination mode and that in this reaction the peroxide adduct acts as an electrophile towards phenol ring. The intramolecular interaction between the phenol moiety and an iron(III)-peroxide adduct may induce activation of the peroxide ion, and this was supported by several facts that the solution containing an iron(III) complex and hydrogen peroxide exhibits high activities for degradation of nucleosides and albumin.     

Study of the mimetic peroxidase-catalysed chemiluminescence reaction

The chemiluminescence behaviour of the reaction in which the Mn-TPPS₄ complex the mimetic enzyme of peroxidase [manganese tetrakis(sulphophenyl)porphine] acts as a catalyst for the oxidation of luminol by hydrogen peroxide was studied. The reaction product luminesces at 427 nm. Trace amounts of hydrogen peroxide and glucose can be determined with detection limits of 5.5 × 10^?9 and 2.7 × 10^?9 M, respectively. The characteristics of Mn-TPPS₄ were compared with those of horseradish peroxidase.     

Synthesis and characterization of manganese(IV) and ruthenium(III) complexes derived from bis (2-hydroxy-1-naphthaldehyde)oxaloyldihydrazone

Bis(2-hydroxy-1-naphthaldehyde)oxaloyldihydrazone(naohH₄) interacts with manganese(II) acetate in methanol followed by addition of KOH giving [Mn^IV(naoh)(H₂O)₂]. Activated ruthenium(III) chloride reacts with naohH₄ in methanol yielding [Ru^III(naohH₄)Cl(H₂O)Cl₂]. The replacement of aquo by heterocyclic nitrogen donor in these complexes has been observed when the reaction is carried out in presence of heterocyclic nitrogen donors such as pyridine(py), 3-picoline(3-pic) or 4-picoline(4-pic). The molar conductance values in DMF for these complexes suggest non-electrolytic nature. Magnetic moment values suggest +4 oxidation state for manganese in its complexes, however, ruthenium(III) complexes are paramagnetic with one unpaired electron. Electronic spectral studies suggest six coordinate metal ions. IR spectra reveal that naohH₄ coordinates in enol-form and keto-form to manganese and ruthenium, respectively. ESR and cyclic voltammetric studies of the complexes have also been reported.     

Kinetics of hydrogen peroxide decomposition with complexed and “free” iron catalysts

The hydrogen peroxide decomposition kinetics were investigated for both “free” iron catalyst [Fe(II) and Fe(III)] and complexed iron catalyst [Fe(II) and Fe(III)] complexed with DTPA, EDTA, EGTA, and NTA as ligands (L). A kinetic model for free iron catalyst was derived assuming the formation of a reversible complex (Fe–HO₂), followed by an irreversible decomposition and using the pseudo‐steady‐state hypothesis (PSSH). This resulted in a first‐order rate at low H₂O₂ concentrations and a zero order rate at high H₂O₂ concentrations. The rate constants were determined using the method of initial rates of hydrogen peroxide decomposition. Complexed iron catalysts extend the region of significant activity to pH 2–10 vs. 2–4 for Fenton's reagent (free iron catalyst). A rate expression for Fe(III) complexes was derived using a mechanism similar to that of free iron, except that a L–Fe–HO₂ complex was reversibly formed, and subsequently decayed irreversibly into products. The pH plays a major role in the decomposition rate and was incorporated into the rate law by considering the metal complex specie, that is, EDTA–Fe–H, EDTA–Fe–(H₂O), EDTA–Fe–(OH), or EDTA–Fe–(OH)₂, as a separate complex with its unique kinetic coefficients. A model was then developed to describe the decomposition of H₂O₂ from pH 2–10 (initial rates = 1 × 10⁻⁴ to 1 × 10⁻⁷ M/s). In the neutral pH range (pH 6–9), the complexed iron catalyzed reactions still exhibited significant rates of reaction. At low pH, the Fe(II) was mostly uncomplexed and in the free form. The rate constants for the Fe(III)–L complexes are strongly dependent on the stability constant, K_ML, for the Fe(III)–L complex. The rates of reaction were in descending order NTA > EGTA > EDTA > DTPA, which are consistent with the respective log K_MLs for the Fe(III) complexes. Because the method of initial rates was used, the mechanism does not include the subsequent reactions, which may occur. For the complexed iron systems, the peroxide also attacks the chelating agent and by‐product‐complexing reactions occur. Accordingly, the model is valid only in the initial stages of reaction for the complexed system. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 24–35, 2000     

Direct carboxylation reaction of methane with CO by a Yb(OAc)3/Mn(OAc)2/NaClO/H2O catalytic system under very mild conditions

A new method of synthesis of acetic acid in water has been developed from the carboxylation of methane with carbon monoxide using lanthanide catalysts. Ytterbium(III) acetate has been found to be the most active catalyst among the compounds of the lanthanide series in the carboxylation reaction of methane with carbon monoxide. Sodium hypochlorite or hydrogen peroxide was used as the oxidant in this reaction. Sodium hypochlorite exhibited more favorable activity than hydrogen peroxide in the reaction. The catalytic activity was improved by the addition of transition-metal salts such as manganese(II) acetate. The best result has been found at a ratio of manganese(II) acetate to ytterbium(III) acetate of 1:10. The optimum reaction conditions (reaction temperature, 40 °C; time, 20 h; methane, 20 atm; carbon monoxide, 5 atm) have been obtained. © 1998 John Wiley & Sons, Ltd.     

2.2 Organic industrial products

Summary Highly sensitive and selective spectrofluoriphotometric determinations of iron(III) with fluorescein(Fl)-hydrogen peroxide-triethylenetetramine (TETA), and manganese(II) with Fl-hydrogen peroxide-TETA-tiron are proposed. The methods are based on the inhibition of the oxidizing decomposition of Fl-hydrogen peroxide solution in the presence of iron(III)-TETA or manganese(II)-TETA-tiron combination. The calibration graphs are linear in the ranges of up to 220 ng iron(III) and up to 270 ng manganese(II) per 25 ml at an emission wavelength of 510 nm with excitation at 490 nm. By measuring the difference of relative fluorescence intensities (F) between Fl-TETA-hydrogen peroxide and its iron(III) solutions or Fl-TETA-tiron-hydrogen peroxide and its manganese(II) solutions, the concentrations of iron(III) or manganese(II) are determined. The application of these methods to the analysis of iron(III) or manganese(II) in waste water was investigated with satisfactory results.

---

Hochempfindliche und selektive fluorimetrische Bestimmungsmethoden für Eisen(III) und Mangan(II) mit Fluorescein/H₂O₂/Triethylentetramin bzw. Fluorescein/H₂O₂/Triethylentetramin/Tiron

---

Application of xanthene derivatives in analytical chemistry. Part LXXVIII. Part LXXVII see ref. [1]     

Epoxidation of cyclohexene with molecular oxygen by electrolysis combined with chemical catalysis

This paper describes an electrochemical coupling epoxidation of cyclohexene by molecular oxygen (O₂) under mild reaction conditions. Herein, the electroreduction of O₂ to hydrogen peroxide (H₂O₂) efficiently proceeds in a relatively environmentally friendly acetone/water medium containing electrolytes at 25–30 °C on a self-assembled H type of electrolysis cell with tree electrodes system, providing ca. 44.3 mM concentration of H₂O₂ under the optimal electrolysis conditions. The epoxidation of cyclohexene with in situ generated H₂O₂ simultaneously occurs upon catalysis by metal complexes, giving ca. 19.8 % of cyclohexene conversion with 78 % of epoxidative selectivity over the best catalyst 5-Cl-7-I-8-quinolinolato manganese(III) complex (Q₃Mn^III (e)). The present electrochemical coupling epoxidation result is nearly equivalent to the epoxidation of cyclohexene with adscititious H₂O₂ catalyzed by the Q₃Mn^III (e).