The effect of copper ions addition on structural and optical properties of zinc borate glasses

Glasses in the ternary system xCuO?(100 ? x)[55B₂O₃·45ZnO] (0 ≤ x ≤ 20 mol%) have been prepared by melting at 1200 °C and rapidly cooling at room temperature. The effect of copper ions addition in 55B₂O₃·45ZnO glass matrix together with the matrix effect on paramagentic behavior has been investigated using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, differential thermal analysis (DTA), electron paramagnetic resonance (EPR), ultraviolet–visible (UV–VIS) spectroscopy and density measurements. The increase of the number of non-bridging oxygen (NBO) atoms as a function of CuO content in these glasses leads to the decrease of glass polymerization which reduces the stability of the glasses and favors the association of copper ions in clusters. This leads to the major changes of structural and optical properties of the studied glasses as can be seen from the data obtained by FTIR and EPR spectroscopies.     

Thermal and optical properties of TeO2–BaO–SrO–Nb2O5 based glasses: New broadband Raman gain media

We systematically added WO₃ (up to 10 mol%) and P₂O₅ (up to 16 mol%) in TeO₂–BaO–SrO–Nb₂O₅ (TBSN) glass system and studied thermal and optical properties of the resultant glasses. The dependences of the additive concentration on glass transition (T_g) and crystallization (T_x) temperatures are presented. The TBSN glass added with ⩾4 mol% WO₃ and P₂O₅ showed high stability against crystallization. The changes in optical band gap energy due to WO₃ and P₂O₅ addition was studied using UV–VIS–NIR absorption spectrometry. The WO₃ addition shifted the optical band gap to longer wavelengths, whereas P₂O₅ addition shifted that to shorter wavelengths. Effects of the WO₃ and P₂O₅ addition on the Raman spectra of TBSN glass are clarified. New Raman bands due to WO₄ and PO₄ tetrahedra formed in the resultant glasses broadened their Raman spectra. Present glasses are characterized by higher thermal stability and wider Raman spectra, therefore, they are promising candidates for fiber Raman amplifiers in photonics systems.     

Short-range structure and in vitro behavior of ZnO–CaO–P2O5 bioglasses

Ternary zinc–calcium-phosphate glasses prepared by classical melting method were characterized through X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) along with energy dispersive X-ray analysis (EDAX), Fourier Transform InfraRed (FTIR) and Raman spectroscopy. The study of these glasses was done in order to supply information regarding their structural particularities since the zinc role in biological environment, especially in the bone, is still under debate.XRD analysis confirmed the vitreous character of the as-prepared samples, while SEM and EDAX measurements indicated the presence of some non-homogeneous domains on their surfaces with approximately similar elemental composition. According to FTIR and Raman spectroscopy, the local structure of glasses up to 10 mol% ZnO is mainly built by Q² tetrahedrons connected by P–O–P linkages. For 50 mol% ZnO, the modifier role of zinc ions is strongly reflected on the local structure dominated in this case by Q¹ pyrophosphate units.The surface reactivity of the samples has been analyzed in vitro by immersion in simulated body fluid (SBF) at 37 °C. XRD, SEM–EDAX, FTIR and Raman methods were employed to characterize the structural changes that occurred on the surface of ZnO–CaO–P₂O₅ samples reacting with SBF. The X-ray diffraction patterns demonstrated the formation of a hydroxyapatite layer on the samples surface while the other used methods didn't reveal concisely that phenomenon. Based on X-ray measurements, the influence of zinc concentration on the hydroxyapatite layer development was followed.     

Effect of iron oxide addition on structural properties of calcium silico phosphate glass/glass-ceramics

Glasses with nominal composition 34SiO₂–(45 ? x) CaO–16 P₂O₅–4.5 MgO–0.5 CaF₂–x Fe₂O₃ (where x = 5, 10, 15, 20 wt.%) have been synthesized by melt quench technique. These have been investigated for structural features by using Fourier transform infra-red (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). Results have shown an increase in fraction of non‐bridging oxygen in glasses with an increase in iron oxide content up to 15 wt.% and subsequently decreases with further increase in iron oxide content to 20 wt.%. These effects are originated by the incorporation of Fe₂O₃ into the silica network. Iron oxide behaves as a network modifier at low concentration and stabilizes the glass network at higher content. The glass-ceramics exhibit an increase in the formation of magnetite phase with an increase in iron oxide. The glass phase in the glass-ceramics matrix, controls the surface dissolution, which in turn decides the response of the material in-vitro. The glass-ceramics with 15 wt.% iron oxide has shown optimum response in simulated body fluid.     

Electrooptical Kerr phenomenon and Raman spectroscopy of one lithium–niobium–silicate glass-forming system

Raman spectra and electrooptical Kerr coefficients of glasses belonging to one lithium–niobate–silicate glass-forming system xNb₂O₅ · (66 ? x)SiO₂ · 19Li₂O · 11K₂O · 2B₂O₃ · 2CdO are studied. It has been found that these glasses demonstrate a record value of electrooptical Kerr coefficient; the glass with x = 35 showed electrooptical Kerr coefficient equal to 266 × 10^?16 m/V². Using Raman spectroscopy combined with the concept of Constant Stoichiometric Groupings, a correlation of electrooptical Kerr coefficients of these glasses with the content of Li₂O · Nb₂O₅ (or 2LiNbO₃) groupings has been demonstrated. The hypothesis that electrooptical Kerr sensitivity of glasses is related to the ordered regions with composition and symmetry corresponding to some of known electrooptical crystals has been verified. These regions, which the authors called ‘Crystal Motifs’, are identified with the groupings found in studying Raman spectra of the glasses.     

Electronic states of SnO-ZnO–P2O5 glasses and photoluminescence properties

SnO–ZnO–P₂O₅ glasses with 30 and 40 mol% P₂O₅ were prepared by a melting process in an air atmosphere. The glass transition temperature, refractive index, and photoluminescence of the glasses were investigated. The electronic states of Sn(II) and Sn(IV) were determined by Mössbauer spectroscopy. The PO₄ units were investigated by Raman spectroscopy. The glass transition temperature was lower than 450 °C, and decreased as the Sn concentrations increased, so that the minimum was about 250 °C. The refractive index increased as the Sn concentration increased. The emission spectra of the glasses peaked at around 2.0–3.0 eV and depended on the glass compositions.     

Studies of lead–iron phosphate glasses by Raman,Mössbauer and impedance spectroscopy

The effect of Fe₂O₃ content on electrical conductivity and glass stability against crystallization in the system PbO–Fe₂O₃–P₂O₅ has been investigated using Raman, XRD, Mössbauer and impedance spectroscopy. Glasses of the molar composition (43.3 − x)PbO–(13.7 + x)Fe₂O₃–43P₂O₅ (0 ⩽ x ⩽ 30), were prepared by quenching melts in the air. With increasing Fe₂O₃ content and molar O/P ratio there is corresponding reduction in the length of phosphate units and an increase in the Fe(II) ion concentration, which causes a higher tendency for crystallization. Raman spectra of the glasses show that the interaction between Fe sites, which is essential for electron hopping, strongly depends on the cross-linking of the glass network. The electronic conduction of these glasses depends not only on the Fe(II)/Fe_tot ratio, but also on easy pathways for electron hopping in a non-disrupted pyrophosphate network. The Raman spectra of crystallized glasses indicate a much lower degree of cross-linking since more non-bridging oxygen atoms are present in the network. Despite the significant increase in the Fe₂O₃ content and Fe(II) ion concentration, there is a considerable weakening in the interactions between Fe sites in crystalline glasses. The impedance spectra reveal a decrease in conductivity, caused by poorly defined conduction pathways, which are result of the disruption and inhomogeneity of the crystalline phases that are formed during melting.     

Characterization of B2O3 and/or WO3 containing tellurite glasses

Characterization of B₂O₃ and/or WO₃ containing tellurite glasses was realized in the 0.80TeO₂–(0.20 ? x)WO₃ ? xB₂O₃ system (0 ≤ x ≤ 0.20 in molar ratio) by using differential scanning calorimetry, Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectrometry techniques. Glasses were prepared with a conventional melt-quenching technique at 750 °C. To recognize the thermal behavior of the glasses, glass transition and crystallization temperatures, glass stability value, glass transition activation energy, fragility parameter were calculated from the thermal analyses. Density, molar volume, oxygen molar volume and oxygen packing density values were determined to investigate the physical properties of glasses. Fourier transform infrared spectra were interpreted in terms of the structural transformations on the glass network, according to the changing B₂O₃ and/or WO₃ content. Crystallization behavior of the glasses was investigated by in situ X-ray diffraction measurements and microstructural characterization was realized by scanning electron microscopy and energy dispersive X-ray spectrometry analyses.     

Effects of modifier additions on the thermal properties,chemical durability,oxidation state and structure of iron phosphate glasses

Modified iron phosphate glasses have been prepared with nominal molar compositions [(1?x)·(0.6P₂O₅–0.4Fe₂O₃)]·xR_ySO₄, where x = 0–0.5 in increments of 0.1 and R = Li, Na, K, Mg, Ca, Ba, or Pb and y = 1 or 2. In most cases the vast majority or all of the sulfate volatalizes and quarternary P₂O₅–Fe₂O₃–FeO–R_yO_z glasses or partially crystalline materials are formed. Here we have characterized the structure, thermal properties, chemical durability and redox state of these materials. Raman spectroscopy indicates that increasing modifier oxide additions result in depolymerization of the phosphate network such that the average value of i, the number of bridging oxygens per –(PO₄)– tetrahedron, and expressed as Qⁱ, decreases. Differences have been observed between the structural effects of different modifier types but these are secondary to the amount of modifier added. Alkali additions have little effect on density; slightly increasing T_g and T_d; increasing α and T_liq; and promoting bulk crystallization at temperatures of 600–700 °C. Additions of divalent cations increase density, α, T_g, T_d, T_liq and promote bulk crystallization at temperatures of 700–800 °C. Overall the addition of divalent cations has a less deleterious effect on glass stability than alkali additions. ⁵⁷Fe Mössbauer spectroscopy confirms that iron is present as Fe²⁺ and Fe³⁺ ions which primarily occupy distorted octahedral sites. This is consistent with accepted structural models for iron phosphate glasses. The iron redox ratio, Fe²⁺/ΣFe, has a value of 0.13–0.29 for the glasses studied. The base glass exhibits a very low aqueous leach rate when measured by Product Consistency Test B, a standard durability test for nuclear waste glasses. The addition of high quantities of alkali oxide (30–40 mol% R₂O) to the base glass increases leach rates, but only to levels comparable with those measured for a commercial soda-lime-silica glass and for a surrogate nuclear waste-loaded borosilicate glass. Divalent cation additions decrease aqueous leach rates and large additions (30–50 mol% RO) provide exceptionally low leach rates that are 2–3 orders of magnitude lower than have been measured for the surrogate waste-loaded borosilicate glass. The P₂O₅–Fe₂O₃–FeO–BaO glasses reported here show particular promise as they are ultra-durable, thermally stable, low-melting glasses with a large glass-forming compositional range.     

Quantitation of sulfate solubility in borosilicate glasses using Raman spectroscopy

Raman spectroscopy is used here as an innovative technique to investigate sulfate content in borosilicate glasses. Using Raman spectroscopy after having heated the material, the evolution of sulfate amounts can be followed as a function of temperature, time and chemical composition of the starting matrix. The accuracy of this technique was verified using electron probe micro analysis (EPMA), on two systems of glasses (SiO₂–B₂O₃–Na₂O (SBNa) and SiO₂–B₂O₃–BaO (SBBa)) in order to compare the effect of alkaline or alkaline-earth elements on sulfur speciation and incorporation. To quantitate sulfate content with Raman spectroscopy, the integrated intensity of the sulfate band at 990 cm^?1 was scaled to the sum of the integrated bands between 850 and 1250 cm^?1, bands that are assigned to Qⁿ silica units. Calibration curves were then determined for different samples. The determination of sulfate contents with Raman spectroscopy analysis is possible with an accuracy of approximately 0.1 wt% depending on the composition of the glass. It mainly allows us to follow sulfate removal during the elaboration process and to establish kinetic curves of sulfate release as a function of the viscosity of the borosilicate glass.     

Dielectric properties,conductivity, UV–visible and infrared spectroscopy of PbO P2O5 NaF glasses containing WO3

Homogeneous (50P₂O₅–(30 ? x)PbO–20NaF–xWO₃ where x = 0.0, 5, 10 and 15 mol%) glasses were synthesized using a melt-quenching method. The short range structures of the phosphate samples were examined by Fourier transform infrared spectroscopy. The infrared spectral studies have pointed out the existence of conventional PO₄, WO₄ and WO₆ structural units in the glass network, the number of WO₄ tetrahedra decreases as WO₃ concentration increases. The optical transmittance and reflectance spectrum of the glasses have been recorded in the wavelength range of 190–1100 nm. The values of the optical band gap E_op for all types of electronic transitions and refractive index have been determined and discussed. The real and imaginary parts ε₁ and ε₂ of the dielectric constant have been determined. The type of electronic transitions in the present glass system is indirectly allowed and the high values for the refractive index and dispersion are recorded due to the high polarizability of tungsten ions. The results of refractive indices as determined reveal the homogeneity of samples and were found to depend on the glass composition. The electrical properties of the glasses were investigated by ac conductivity from 0.12 to 100 kHz for temperatures ranging from room temperature to 600 K. The study of dielectric properties suggested increase in the insulating character of the glass system with increase in the content of WO₃. The ac conductivity in the high temperature region seems to be connected mainly with the polarons involved in the process of transfer from W⁴⁺ to W⁵⁺ ions.     

Structure and properties of NaPO3–ZnO–Nb2O5–Al2O3 glasses

In an effort to design low-melting, durable, transparent glasses, two series of glasses have been prepared in the NaPO₃–ZnO–Nb₂O₅–Al₂O₃ system with ZnO/Nb₂O₅ ratio of 2 and 1. The addition of ZnO and Nb₂O₅ to the sodium aluminophosphate matrix yields a linear increase of properties such as glass transition temperature, density, refractive index and elastic moduli. The chemical durability is also significantly, but nonlinearly, improved. The glass with the highest niobium concentration, 55NaPO₃–20ZnO–20Nb₂O₅–5Al₂O₃ was found to have a dissolution rate of 4.5 × 10^? 8 g cm^? 2 min^? 1, comparable to window glass. Structural models of the glasses were developed using Raman spectroscopy and nuclear magnetic resonance spectroscopy, and the models were correlated with the compositional dependence of the properties.     

Synthesis and characterization of M2O–MgO–WO3–P2O5 (M = K, Rb, Cs) glass system

Transparent glasses of the composition M₂O–MgO–WO₃–P₂O₅ (M = K, Rb, Cs), corresponding to the crystalline phases of M₂MgWO₂(PO₄)₂, have been prepared and studied by Raman and IR spectroscopy as well as DTA. Moreover, the thermally stimulated depolarization and dc conductivity have been measured. The glass transition temperature is 797, 795 and 773 K for the K-, Rb- and Cs-containing glass, respectively. Raman and IR studies have shown that these glasses have very similar structure. The main building blocks are pyrophosphate groups, WO₆ octahedra and magnesium–oxygen polyhedra. The dc conduction in these glasses is controlled by hopping of small polarons. The potassium containing glass was shown to be very stable whereas the rubidium and cesium glasses have significantly higher tendency for crystallization and phase separation. It seems, therefore, that the potassium containing glass is a suitable material for the preparation of samples containing non-linear and ferroelectric nanocrystals of the K₂MgWO₂(PO₄)₂ phosphate.     

The preparation and structural studies in the (80 − x)TeO2–20ZnO–(x)Er2O3 glass system

Er³⁺-doped tellurite glasses of the (80 ? x)TeO₂–20ZnO–(x)Er₂O₃ system (0.5 mol% ? x ? 2.5 mol%) have successfully been made by melt-quenching technique and their structure has been investigated by means of DTA and Raman spectroscopy. The DTA results show the thermal parameters; such as the glass transition temperature (T_g) and crystallization temperature (T_c) were determined. It is found that this system provides a stable and wide glass formation range in which the glass stability around 99–140 °C may be obtained. The Raman spectroscopy used the structural studies in the glass system. Two Raman shift peaks were observed around 640–670 cm^?1 and 720–740 cm^?1, which correspond to the stretching vibration mode of TeO₄ tbp and TeO₃ tp, respectively. It is found that the spectral shift in Raman spectra is depending on the Er₂O₃ content. This evolution is an indication of the changes in the basic unit of the glass structure.     

Structure-property correlation in (50 − x)Na2O–50P2O5–xCoCl2 glassy systems

Ternary sodium–cobalt–phosphate glasses of the composition (50 − x)Na₂O–50P₂O₅–xCoCl₂ with x varying between 0 and 15 mol% prepared by melt quenching have been characterized by Fourier transform infrared (FT-IR) spectroscopy and X-ray diffraction (XRD) techniques. Thermal (T_g, T_c) and electrical properties have been investigated. Infrared spectra reveal the formation of metaphosphate glasses (Q² tetrahedral units) with symmetric bridging oxygen (P–O–P) and non-bridging oxygen (P–O⁻). The spectra also indicate the formation of P–O–Co bonds in the metaphosphate glasses that replace P–O⁻–Na⁺ bonds. The results of thermal studies correlate with these FT-IR findings and support the formation of P–O–Co bonds and an increased cross-link density with increasing CoCl₂. This results in enhanced chemical durability and increased T_g and T_c of the glasses. The electrical conductivity parameters upon changing the composition have been correlated with structural changes in the glass matrix.     

Raman spectroscopic study of some lead phosphate glasses with tungsten ions

The structure of xWO₃ · (100 − x)[2P₂O₅ · PbO] glass system with 0 ⩽ x ⩽ 50 mol% was investigated by Raman spectroscopy. The characteristic bands of these glasses due to the stretching and bending vibrations were identified and analyzed by the increasing of WO₃ content. This fact allowed us to identify the specific structural units which appear in these glasses and thus to point out the network modifier role of tungsten oxide for low concentrations and its former role at high concentrations.     

Structure and properties of potassium niobato-borophosphate glasses

Bulk glasses of the series (1 ? x)[0.5K₂O–0.1B₂O₃–0.4P₂O₅]–xNb₂O₅ with x = 0–45.7 mol% Nb₂O₅ were prepared by slow cooling in air and investigated by Raman, ³¹P, and ¹¹B MAS NMR spectroscopy. The incorporation of Nb₂O₅ into the parent borophosphate glass results in a substantial increase in the glass transition temperature and chemical durability of glasses. Raman spectra showed that Nb atoms form distorted NbO₆ octahedra, which are isolated at low Nb₂O₅ content, whereas at higher Nb₂O₅ content they form clusters. ¹¹B NMR spectra of the glasses revealed the interaction between Nb₂O₅ and BO₄ tetrahedral units, which results in a partial transformation of tetrahedral BO₄ units to trigonal BO₃ units and the formation of mixed B(OP)_4?n(ONb)_n units.     

Thermal and optical properties of TeO2–ZnO–BaO glasses

We report the results of a systematic study of the thermal and optical properties of a new family of tellurite glasses, TeO₂–ZnO–BaO (TZBa), as a function of the barium oxide mole fraction and compare them with those of TeO₂–ZnO–Na₂O (TZN). The characteristic temperatures of this new glass family (glass transition, T_g, crystallization, T_x, and melting, T_m) increase significantly with BaO content and the glasses are more thermally stable (greater ΔT = T_x ? T_g) than TZN glasses. Relative to these, Raman gain coefficient of the TZBa glasses also increases by approximately 40% as well as the Raman shift from ~ 680 cm^? 1 to ~ 770 cm^? 1. The latter shift is due to the modification of the glass with the creation of non-bridging oxygen ions in the glass network. Raman spectroscopy allows us to monitor the changes in the glass network resulting from the introduction of BaO.     

Dielectric behavior and impedance spectroscopy of bismuth iron phosphate glasses

The electrical and dielectrical properties of Bi₂O₃–Fe₂O₃–P₂O₅ glasses were measured by impedance spectroscopy in the frequency range from 0.01 Hz to 4 MHz and over the temperature range from 303 to 473 K. It was shown that the dc conductivity strongly depends on the Fe₂O₃ content and Fe(II)/Fe_tot ratio. With increasing Fe(II) ion content from 17% to 34% in the bismuth-free 39.4Fe₂O₃–59.6P₂O₅ and 9.8Bi₂O₃–31.7Fe₂O₃–58.5P₂O₅ glasses, the dc conductivity increases. On the other hand, the decrease in dc conductivity for the glasses with 18.9 mol% Bi₂O₃ is attributed to the decrease in Fe₂O₃ content from 31.7 to 23.5 mol%, which indicates that the conductivity for these glasses depends on Fe₂O₃ content. The conductivity for these glasses is independent of the Bi₂O₃ content and arises mainly from polaron hopping between Fe(II) and Fe(III) ions suggesting an electronic conduction. The evolution of the complex permittivity as a function of frequency and temperature was investigated. At low frequency the dispersion was investigated in terms of dielectric loss. The thermal activated relaxation mechanism dominates the observed relaxation behavior. The relationship between relaxation parameters and electrical conductivity indicates the electronic conductivity controlled by polaron hopping between iron ions. The Raman spectra show that the addition of up to 18.9 mol% of Bi₂O₃ does not produce any changes in the glass structure which consists predominantly of pyrophosphate units.     

Synthesis and structural characterization of P2O5–CaO–Na2O sol–gel materials

Ternary phosphate-based glasses in the system P₂O₅–CaO–Na₂O were synthesized using the sol–gel approach. Glasses in this system have the potential for use as bioactive materials. A mixture of mono- and dialkyl phosphate PO(OH)_3−x(OC₂H₅)_x (x = 1, 2) and alkoxides of sodium and calcium in an ethylene glycol solution were used as precursors. One of the compositions has also been synthesized by sonocatalysis (application of ultrasonic vibration to the sol). The systems synthesized, which remain fully amorphous even after calcination at 400 °C given the appropriate composition, have been characterized using X-ray diffraction (XRD). Thermal properties have been examined by means of thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The structure of the phosphate network has been studied as a function of composition using Fourier transform infrared spectroscopy (FT-IR) and ³¹P MAS NMR.