Effects of anti-symmetric nonlinear viscous damping on the force transmissibility of multi-degree of freedom structures

In the present study, the concept of the output frequency response function is applied to theoretically investigate the force transmissibility of multi-degree of freedom (MDOF) structures with a nonlinear anti-symmetric viscous damping. The results reveal that an anti-symmetric nonlinear viscous damping can significantly reduce the transmissibility over all resonance regions for MDOF structures while it has almost no effect on the transmissibility over non-resonant and isolation regions. The results indicate that the vibration isolators with an anti-symmetric damping characteristic have great potential to overcome the dilemma in the design of linear viscously damped vibration isolators where an increase of the damping level reduces the force transmissibility over resonant region but increases the transmissibility over non-resonant regions.     

Reducing force transmissibility in multiple degrees of freedom structures through anti-symmetric nonlinear viscous damping

In the present study, the Volterra series theory is adopted to theoretically investigate the force transmissibility of multiple degrees of freedom (MDOF) structures, in which an isolator with nonlinear anti-symmetric viscous damping is assembled. The results reveal that the anti-symmetric nonlinear viscous damping can significantly reduce the force transmissibility over all resonance regions for MDOF structures with little effect on the transmissibility over non-resonant and isolation regions. The results indicate that the vibration isolators with an anti-symmetric damping characteristic have great potential to solve the dilemma occurring in the design of linear viscously damped vibration isolators where an increase of the damping level reduces the force transmissibility over resonant frequencies but increases the transmissibility over non-resonant frequency regions. This work is an extension of a previous study in which MDOF structures installed on the mount through an isolator with cubic nonlinear damping are considered. The theoretical analysis results are also verified by simulation studies.     

Dynamic analysis and performance evaluation of nonlinear inerter-based vibration isolators

This paper investigates a nonlinear inertance mechanism (NIM) for vibration mitigation and evaluates the performance of nonlinear vibration isolators employing such mechanism. The NIM comprises a pair of oblique inerters with one common hinged terminal and the other terminals fixed. The addition of the NIM to a linear spring-damper isolator and to nonlinear quasi-zero-stiffness (QZS) isolators is considered. The harmonic balance method is used to derive the steady-state frequency response relationship and force transmissibility of the isolators subjected to harmonic force excitations. Different performance indices associated with the dynamic displacement response and force transmissibility are employed to evaluate the performance of the resulting isolators. It is found that the frequency response curve of the inerter-based nonlinear isolation system with the NIM and a linear stiffness bends towards the low-frequency range, similar to the characteristics of the Duffing oscillator with softening stiffness. It is shown that the addition of NIM to a QZS isolator enhances vibration isolation performance by providing a wider frequency band of low amplitude response and force transmissibility. These findings provide a better understanding of the functionality of the NIM and assist in better designs of nonlinear passive vibration mitigation systems with inerters.     

几何非线性摩擦阻尼隔振系统动力学行为研究

非线性隔振系统由于具有较线性系统更优的隔振性能,因此在工程中应用广泛.本文通过配置与被隔振对象的运动方向相垂直的库伦摩擦阻尼器,构建了几何非线性摩擦阻尼模型.由于引入了几何非线性,因此其摩擦力与位移正相关,这与传统与位移无关摩擦力模型有显著不同.首先,建立了具有几何非线性摩擦阻尼的数学模型以及隔振系统的受迫振动方程;然后,使用谐波平衡法求解了动力学方程,并使用数值仿真方法验证了谐波平衡法求解的准确性;最后,研究了几何非线性摩擦阻尼隔振器的绝对位移传递率和相对位移传递率.研究结果表明,在库伦摩擦阻尼选择适当,非线性摩擦阻尼系统可以在保持高频振动衰减效果的前提下,显著降低系统共振峰,其性能优于传统的恒定摩擦阻尼隔振模型.同时,几何非线性摩擦阻尼系统能够避免传统摩擦阻尼系统中的“锁定”现象,从传递率角度来说,不利于共振峰控制;但从激励环境改变引发隔振系统失效的角度来看,几何非线性摩擦阻尼系统可以拓宽系统对激励幅值的适应范围,避免隔振系统失效.本文的研究结果对此类隔振系统的设计和摩擦阻尼参数的选择具有通用的指导意义.      

Influence of excitation amplitude on the characteristics of nonlinear butyl rubber isolators

The purpose of this study is to explore the advantages and characteristics of nonlinear butyl rubber (type IIR) isolators in vibratory shear by comparison with linear isolators. It is known that the mechanical properties of viscoelastic materials exhibit significant frequency and temperature dependence, and in some cases, nonlinear dynamic behavior as well. Nonlinear characteristics in shear deformation are reflected in mechanical properties such as stiffness and damping. Furthermore, even when the excitation amplitude is small the response amplitude may often be large enough that nonlinearities cannot be ignored. The treatment involves developing phenomenological models of the effective storage modulus and effective loss factor of a rubber isolator material as a function of excitation amplitude. The transmissibility of a nonlinear viscoelastic isolator is compared with that of a linear isolator using an equivalent linear damping coefficient. Forced resonance vibration and impedance tests are used to characterize nonlinear parameters and to measure the normalized transmissibility. It is found that as the excitation amplitude of the nonlinear viscoelastic isolator increases, the response amplitude decreases and the transmissibility is improved over that of the linear isolator for excitation frequency that exceeds a particular value governed by the temperature and excitation amplitude. The method of multiple scales and numerical simulations are used to predict the response characteristics of the isolator based on the phenomenological modeling under different values of system parameters.     

Force and displacement transmissibility of a quasi-zero stiffness vibration isolator with geometric nonlinear damping

A geometric nonlinear damping is proposed and applied to a quasi-zero stiffness (QZS) vibration isolator with the purpose of improving the performance of low-frequency vibration isolation. The force, stiffness and damping characteristics of the system are presented first. The steady-state solutions of the QZS system are obtained based on the averaging method for both force and base excitations and further verified by numerical simulation. The force and displacement transmissibility of the QZS vibration isolator are then analysed. The results indicate that increasing the nonlinear damping can effectively suppress the force transmissibility in resonant region with the isolation performance in higher frequencies unaffected. In addition, the application of the nonlinear damping in the QZS vibration isolator can essentially eliminate the unbounded response for the base excitation. Finally, the equivalent damping ratio is defined and discussed from the viewpoint of vibration control.     

Study on the force transmissibility of vibration isolators with geometric nonlinear damping

By a special layout of the damper in a vibration isolation system, the velocity-nth power damping of the damper can be transformed into the velocity-displacement dependent damping in the moving direction due to geometric nonlinearity. This study is mainly concerned with the mechanism of this geometric nonlinear damping and tries to find some guidelines for designing isolators with high performance, regardless of the isolator is passive or active. The model used in this study is an unconstrained two-degree-of-freedom isolation system, which is suitable for investigating vibration isolation in space vehicles. The motion equation is solved by the averaging method to obtain the amplitude–frequency equation. The influence of damping coefficients on the force transmissibility is analyzed. Results show that this kind of damping has some advantages in improving isolation performance at both the resonance and higher frequencies. Meanwhile, it can also degrade the isolation performance if unreasonable parameters are chosen.     

Vibration of two beams connected by nonlinear isolators: analytical and experimental study

To study the coupling vibration of nonlinear isolators and flexible bodies, test rigs of two flexible beams connected by wire mesh isolators are constructed and investigated both experimentally and analytically. A five-parameter polynomial model of wire mesh isolators is derived by identifying parameters in the frequency domain with the sine-sweep test. For obtaining the parameters that are valid in a wide range of frequency, a numerically assisted identification method is developed. With this model, the vibration of two flexible beams connected by wire mesh isolators is studied. The frequency response is obtained analytically by employing the Green’s function method and harmonic balance method. Sine-sweep test results with three test rigs show good coherence with the corresponding numerical results. With obtained experimental results and numerical results, effect of connection parameters is studied in detail. It is found that traditional design rules for isolators are no longer effective and the coupling vibration must be investigated in the design phase. Another phenomenon is that the damping has a function of weakening the effect of nonlinear stiffness. Nonlinear stiffness and nonlinear damping can decrease the transmissibility along with the increase of the excitation level.     

A quasi-zero-stiffness isolator with a shear-thinning viscous damper

Quasi-zero-stiffness(QZS) vibration isolators have been widely studied,because they show excellent high static and low dynamic stiffnesses and can effectively solve low-frequency and ultralow-frequency vibration. However, traditional QZS(T-QZS)vibration isolators usually adopt linear damping, owing to which achieving good isolation performance at both low and high frequencies is difficult. T-QZS isolators exhibit hardening stiffness characteristics, and their vibration isolation performance is e...     

A high-static–low-dynamic-stiffness vibration isolator with the auxiliary system

High-static–low-dynamic-stiffness (HSLDS) vibration isolators seek to widen the frequency range of isolation by decreasing the dynamic stiffness so as to reduce the natural frequency, while maintaining the same static displacement as equivalent linear isolators. However, in many cases especially under light damping or large excitations, the peak transmissibility is very large and the hardening nonlinearity causes the transmissibility curve to bend to the right seriously or in other words causes the jump phenomenon, resulting in a greatly reduced isolation region. In this paper, an auxiliary system is added to the HSLDS isolator to overcome these disadvantages, with the static displacement of the isolation object remaining unchanged. Coefficient-varying harmonic balance method is proposed in this paper to find the dynamic response and most importantly analyze the stability of the steady-state response. The isolation performance of the HSLDS-AS isolator, which is evaluated by displacement transmissibility, is compared with that of the equivalent HSLDS isolator. The effects of system parameters on the isolation performance are investigated. It is shown that the auxiliary system can lower the peak transmissibility and eliminate the jump phenomenon, resulting in a wide isolation region, and the HSLDS-AS isolator has strong designability with many parameters tunable.     

The force transmissibility of MDOF structures with a non-linear viscous damping device

In the present study, the concept of the Output Frequency Response Function (OFRF), recently proposed by the authors, is applied to theoretically investigate the force transmissibility of MDOF structures with a cubic non-linear viscous damping device. The results analytically show that the introduction of cubic non-linear damping can significantly reduce the transmissibility over all resonance regions for a Multiple Degree of Freedom (MDOF) structure and at the same time leave the transmissibility over the isolation region virtually unaffected. The analysis also indicates that a strong linear damping may shift the system resonances and compromise the beneficial effects of cubic non-linear viscous damping on the force transmissibility of MDOF structures. This suggests that a less significant linear damping together with a strong cubic non-linear damping can be used in MDOF structures to achieve a desired vibration isolation performance. This research work has a significant implication for the design of viscously damped MDOF structures for a wide range of practical applications.     

带非线性弹簧的两自由度准零刚度隔振系统力传递率特性

基于多自由度系统中的反共振特性,分别在传统线性隔振系统的上、下两层引入非线性倾斜弹簧负刚度机构,构成两自由度准零刚度隔振器。通过静态特性分析,推导出系统满足零刚度条件时,各参数之间的关系,分析了力学参数及结构参数对系统刚度特性的影响。建立两自由度准零刚度隔振系统的非线性动力学方程,利用平均法求解,推导出力传递率表达式,结合数值分析方法,探讨系统在不同的上、下层隔振器阻尼比、竖直刚度比及质量比情况下的力传递率特性,并与单自由度准零刚度隔振系统及线性斜弹簧两自由度准零刚度隔振系统进行对比研究。结果表明：当结构参数 （即：倾斜弹簧处于静平衡位置的长度与倾斜弹簧原长的比值）较小且倾斜弹簧为软化弹簧时,可在平衡位置附近获得较小的系统刚度及较大的低刚度区间;通过选择适当的上、下层隔振器阻尼比、竖直刚度比与质量比,可减小系统的起始隔振频率,增宽隔振频带,加快系统力传递率在特定频段内的衰减速率,改善系统的低频隔振性能。     

Application of non-linear damping to vibration isolation: an experimental study

In a previous study, the authors have proved that in theory the introduction of a cubic non-linear damping can produce ideal vibration isolation such that the system force transmissibility over the resonant frequency region is modified, but the transmissibility over the non-resonant regions remain unaffected. The present study is concerned with both an experimental verification of this theoretical finding and the selection of the cubic damping characteristic parameter required to achieve a desired performance for a single degree of freedom vibration isolation system. These results provide an important basis for the design and practical application of non-linearly damped vibration isolation systems in engineering practice.     

含机械调频式动力吸振器的准零刚度隔振系统隔振性能分析

基于动力吸振器原理,在单自由度准零刚度隔振器基础上耦合可调频动力吸振器构成两自由度隔振系统。首先,对动力吸振器工作原理进行理论分析并提出其力学模型;其次,通过静力学分析,推导出系统满足零刚度条件时,各参数间的关系并分析其对系统刚度特性的影响;然后,建立两自由度隔振系统非线性动力学方程,利用谐波平衡法进行幅频响应解析分析,得到力传递率表达式;最后,数值分析动力吸振器阻尼、刚度、质量、激励力幅值和弹簧片有效长度对力传递率的影响规律,并与单自由度准零刚度隔振系统及两自由度线性隔振系统对比分析。结果表明：通过选择适当的动力吸振器参数不仅可以减小系统的起始隔振频率,增宽隔振频带,且还能加快系统力传递率在特定频段内的衰减速率,改善系统的低频隔振性能,实现激励频率的可适应性。     

Analysis and design of the force and displacement transmissibility of nonlinear viscous damper based vibration isolation systems

This study is concerned with the analysis and design of the force and displacement transmissibility of nonlinear viscous damper based vibration isolation systems. Analytical algorithms are derived using the Ritz–Galerkin method to evaluate the transmissibility of SDOF displacement vibration isolation and force vibration isolation systems where a nonlinear viscous damper is used as an energy dissipating device. The results reveal that compared to linear dampers, nonlinear viscous dampers can more significantly improve the system vibration isolation performance in a wider frequency range. A procedure is then proposed based on the analysis results to facilitate the design of nonlinear viscous dampers for system vibration isolation purposes. These results have significant implications for the design of vibration isolation systems in many engineering applications.     

Nonlinear-forced vibrations of piezoelectrically actuated viscoelastic cantilevers

This paper aims to study the nonlinear-forced vibrations of a viscoelastic cantilever with a piecewise piezoelectric actuator layer on its top surface using the method of Multiple Scales. The governing equation of motion is a second-order nonlinear ordinary differential equation with quadratic and cubic nonlinearities which appear in stiffness, inertia, and damping terms. The nonlinear terms are due to the piezoelectricity, viscoelasticity, and geometry of the system. Forced vibrations of the system are investigated in the cases of primary resonance and non-resonance hard excitation including subharmonic and superharmonic resonances. Analytical expressions for frequency responses are derived, and the effects of different parameters including damping coefficient, thickness to width ratio of the beam, length and position of the piezoelectric layer, density of the beam, and the piezoelectric coefficient on the frequency-response curves are discussed for each case. It is shown that in all these cases, the response of the system follows a softening behavior due to the existence of the piezoelectric layer. The piezoelectric layer provides an effective tool for active control of vibration. In addition, the effect of the viscoelasticity of the beam on passive control of amplitude of vibration is illustrated.     

A kind of nonlinear oscillations of single degree of non-autonomy system

In this paper we use the method of derivative expansion of multiple scales of singularperturbations and we have solve the forced vibration equation of a particle attached to anonlinear spring under the influence of slight viscous damping.The problem is of the fourthorder nonlinearity.Tle four cases discussed are: the soft excitation of non-resonance,thehard excitation of non-resonance,the soft excitation of resonance,the hard excitation ofresonance.     

On some performance characteristics of base excited vibration isolation systems with a purely nonlinear restoring force

Base excited vibration isolation systems with a purely nonlinear restoring force and a velocity nth power damper are considered. The restoring force has a single-term power form with the exponent that can be any non-negative real number. Approximations for the steady-state response at the frequency of excitation are obtained by using the Jacobi elliptic function with a changeable elliptic parameter and by applying an elliptic averaging method. The relative and absolute displacement transmissibility of this system are analysed. These performance characteristics are expressed in terms of the damping parameters, but they are also determined for an arbitrary non-negative real power of geometric nonlinearity, which represent new and so far unknown results. Some examples illustrating the effect of the system parameters on these performance characteristics are also presented.     

Nonlinear vibration of fluid-conveying single-walled carbon nanotubes under harmonic excitation

In this paper, the nonlinear vibration of a single-walled carbon nanotube conveying fluid is investigated utilizing a multidimensional Lindstedt–Poincaré method. Considering the geometric large deformation of the single-walled carbon nanotube and external harmonic excitation force, based on nonlocal elastic theory and Euler–Bernoulli beam theory, the nonlinear vibration equation of a fluid-conveying single-walled carbon nanotube is established. Analyzing the equation through the multidimensional Lindstedt–Poincaré method, and from the solvability condition of the nonlinear vibration equation, the cubic algebraic equation which indicates the amplitude–frequency relation is obtained. Based on the root discriminant of the cubic equation, the first order primary response of the pinned–pinned carbon nanotube is discussed. The relations among internal resonance, the amplitude and frequency of the external excitation force are analyzed in detail. When the external excite force frequency is around the first mode natural frequency, the first mode primary resonance occurs. If simultaneously the first two modes natural frequency ratio is around 3, internal resonance occurs and the internal resonance region depends on the amplitude of external excitation force.     

Vibration reduction evaluation of a linear system with a nonlinear energy sink under a harmonic and random excitation

The nonlinear behaviors and vibration reduction of a linear system with a nonlinear energy sink(NES) are investigated. The linear system is excited by a harmonic and random base excitation, consisting of a mass block, a linear spring, and a linear viscous damper. The NES is composed of a mass block, a linear viscous damper, and a spring with ideal cubic nonlinear stiffness. Based on the generalized harmonic function method,the steady-state Fokker-Planck-Kolmogorov equation is presented to reveal...