Crystallization and morphology of star-shaped polyethylenoxyde-b-polycaprolactone under high pressure carbon dioxide

Atomic force microscopy（AFM）,wide-angle X-ray diffraction（WAXD） and differential scanning calorimetry are used to analyze the crystallization morphology and melting behavior of 4-arm PEO-b-PCL under high-pressure CO₂.It is demonstrated that CO₂ has certain effect on the melting and crystallization behavior of the samples.After crystallization under CO₂ at 4 MPa,spherulites with concentric ring-banded structure are formed which are composed of crystals with periodic thickness variation,and the band distance decreases with increasing treatment pressure.Due to the plasticization effect of CO₂,depression of the melting temperature is observed with sorption of CO₂ in polymers.     

Influence of graphene nanosheets on stereocomplex crystallization behaviors of star‐shaped poly (D(L)‐lactide) stereoblock copolymer

The nanocompsites of star‐shaped poly(D‐lactide)‐co‐poly(L‐lactide) stereoblock copolymers (s‐PDLA‐PLLA) with two‐dimensional graphene nanosheets (GNSs) were prepared by solution mixing method. Crystallization behaviors were investigated using differential scanning calorimetry, polarized optical microscopy, and wide angle X‐ray diffraction. The results of isothermal crystallization behaviors of the nanocompsites clearly indicated that the GNS could remarkably accelerate the overall crystallization rate of s‐PDLA‐PLLA copolymer. Unique stereocomplex crystallites with melting temperature about 207.0°C formed in isothermal crystallization for all samples. The crystallization temperatures of s‐PDLA‐PLLAs shifted to higher temperatures, and the crystallization peak shapes became sharper with increasing GNS contents. The maximum crystallization temperature of the sample with 3 wt% GNS was about 128.2°C, ie, 15°C higher than pure s‐PDLA‐PLLA. At isothermal crystallization processes, the halftime of crystallization (t_0.5) of the sample with 3 wt% GNS decreased to 6.4 minutes from 12.9 minutes of pure s‐PDLA‐PLLA at 160°C.The Avrami exponent n values for the nanocomposites samples were 2.6 to 3.0 indicating the crystallization mechanism with three‐dimensional heterogeneous nucleation and spherulites growth. The morphology and average diameter of spherulites of s‐PDLA‐PLLA with various GNS contents were observed in isothermal crystallization processes by polarized optical microscopy. Spherulite growth rates of samples were evaluated by using combined isothermal and nonisothermal procedures and analyzed by the secondary nucleation theory. The results evidenced that the GNS has acceleration effects on the crystallization of s‐PDLA‐PLLA with good nucleation ability in the s‐PDLA‐PLLA material.     

Crystallization,morphology, and thermal behavior of poly(p‐phenylene sulfide)

This article deals with the structure, crystallization, morphology, and thermal behavior of poly(p‐phenylene sulfide) (PPS) with low‐molecular mass, probed by DSC, optical, and electron microscopy. The growth rates of spherulites were measured over the temperature range 235–275°C. A regime II–III transition was found at T = 250°C. The regime transition was accompanied by a morphological change from sheaflike structure to classical spherulites. The Avrami equation poorly described the isothermal crystallization of PPS, for the occurrence of mixed growth mechanisms and secondary crystallization, in agreement with the morphology and the thermal behavior. Two melting peaks were detected on DSC curves and attributed to the melting of crystals formed isothermally at T_c by primary and secondary crystallization. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 415–424, 2001     

Morphological studies on polybutylene terephthalate

The morphology of poly(butylene terephthalate) (PBT) crystallized from the melt at various temperatures was studied by small-angle light scattering, polarizing microscopy, and wide-angle x-ray diffraction. Spherulites with a maltese cross at 45° to the polars formed at lower temperatures while spherulites having an apparently higher melting point with a maltese cross along the polars (0°–90°) formed at higher temperatures. The spherulite size and crystallinity increased with increasing crystallization temperature. The H_v scattering patterns arising from the spherulites formed at lower temperature showed intensity maxima at azimuthal angles of 0° and 90°, while those obtained at higher temperatures showed the more common 45° intensity maxima. Microtomed samples from molded PBT bars showed spherulites with a 45° maltese cross which changed to a 0°–90° maltese cross upon heating just prior to melting. The skin-core effect due to varying thermal histories in these molded bars was clearly observed. Solvent crystallized films contained positive 0°–90° spherulites. Some changes occurring upon uniaxial stretching of PBT films are also discussed.     

Melting behavior of isotactic polystyrene

The melting behavior of isotactic polystyrene, crystallized from the melt and from dilute solutions in trans-decalin, has been studied by differential scanning calorimetry and solubility measurements. The melting curves show 1, 2, or 3 melting endotherms. At large supercooling, crystallization from the melt produces a small melting endotherm just above the crystallization temperature T_c. This peak originates from secondary crystallization of melt trapped within the spherulites. The next melting endotherm is related to the normal primary crystallization process. Its peak temperature increases linearly with T_c, yielding an extrapolated value for the equilibrium melting temperature T_c° of 242 ± 1°C as found before. By self-seeding, crystallization from the melt could be performed at much higher temperature to obtain melting temperatures as high as 243°C, giving rise to doubt about the value of T_c° found by extrapolation. For normal values of T_c and heating rate, an extra endotherm appears on the melting curve. Its peak temperature is the same for both melt-crystallized and solution-crystallized samples, and independent of T_c, but rises with decreasing heating rate. From the effects of heating rate and partial scanning on the ratio of peak areas and of previous heat treatment on dissolution temperature, it is concluded that this peak arises from the second one by continuous melting and recrystallization during the scan.     

Influence of microcrystalline cellulose fiber (MCCF) on the morphology of poly(3-hydroxybutyrate) (PHB)

Biopolymer composites were prepared from poly(3-hydroxybutyrate) (PHB)/microcrystalline cellulose fiber (MCCF)/plastiziers/poly(vinyl acetate) by melt extrusion. The morphology, crystal structure, and non-isothermal crystallization of these composites were investigated by polarized optical microscopy (POM), differential scanning calorimetry, Fourier transform infrared spectrometer, and wide-angle X-ray diffraction. The results of DSC indicate that the addition of small amount of MCCF improved the crystallization rate. Non-isothermal crystallization shows that the composites 1 and 2 have lower crystallization half time (t _{0 .5}) than that of pure PHB. Higher MCCF contents in PHB (composite 4) lead to a decrease in the crystallization rate. POM micrographs show that the MCCF were well dispersed in the PHB matrix and served as a nucleating agent with a strong change in PHB morphology. Increasing the isothermal crystallization temperature above 120 °C, leads to the formation of banded spherulites with large regular band spacing. Decreasing the isothermal crystallization temperature below 100 °C produces more and small spherulites.     

Poly(dithiotriethylene adipate): Melting behavior, crystallization kinetics and morphology

The melting behavior and the crystallization kinetics of poly(dithiotriethylene adipate) (PSSTEA) were investigated by differential scanning calorimetry and hot-stage optical microscopy. The observed multiple endotherms, commonly displayed by polyesters, were influenced by the crystallization temperature (T_c) and ascribed to melting and recrystallization processes. Linear and nonlinear theoretical treatments were applied to estimate the equilibrium melting temperature for PSSTEA, using the corrected values of the melting temperature; the nonlinear estimation yielded a higher value by about 15 °C. Isothermal crystallization kinetics were analyzed according to the Avrami’s theory. Values of the Avrami’s exponent n close to 3 were obtained, independently of T_c, in agreement with a crystallization process originating from predeterminated nuclei and characterized by three-dimensional spherulitic growth. As a matter of fact, space-filling spherulites were observed by optical microscopy at all T_c’s. The rate of crystallization became lower as T_c increased, as usual at low undercooling, the crystallization process being controlled by nucleation.     

Morphology control of polypropylene by crystallization under carbon dioxide

We investigated the crystalline morphology of isotactic polypropylene obtained by melt crystallization under carbon dioxide (CO₂) at various pressures. Spherulites consisting of regularly arranged fibrils without subsidiary lamellae were obtained by crystallization under CO₂ below 2 MPa, whereas large spherulites consisting of irregularly arranged fibrils with subsidiary lamellae were obtained under ambient pressure. Distorted domain crystals with uniform optical anisotropy consisting of α‐form were found to be obtained under CO₂ above 2 MPa, and needle crystals consisting of γ‐form were obtained above 12 MPa. Transmission electron micrographs showed that straight and thick lamellae are regularly arranged in both the distorted domain crystals and the needle crystals. The uniformly thick lamellae were confirmed by differential scanning calorimetry thermograms; that is, the melting temperature is higher and the melting peak is sharper than those obtained under ambient pressure. Such characteristic crystalline morphologies obtained under CO₂ may be attributed to local ordering in the melt state. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2738–2746, 2004     

An Unusual but Consistent View on Flow Induced Crystallization of Polymers

Summary.  There is a considerable difference of more than 40 degrees centigrade between the equilibrium melting point of the α-crystal modification of i-PP and the lower temperature, where the α-spherulites of this polymer melt. The equilibrium melting point represents the temperature, where ideal crystals melt. In these crystals the macromolecules are in a stretched conformation. In contrast, in the spherulites the molecules are contained in lamellae of finite thickness. As a consequence it seems that in the interval between these two characteristic temperatures the nucleation kinetics is very different from the kinetics observed at temperatures below the melting temperature of the spherulites. This observation is of importance because almost all measurements on flow induced crystallization have been carried out below the melting temperature of the spherulites. It can be shown that at these lower temperatures the kinetics of crystallization (including flow induced crystallization) has nothing to do with the classical ideas about sporadic nucleation.     

Compressed‐gas‐induced crystallization in tert‐butyl poly(ether ether ketone)

tert‐Butyl‐substituted poly(ether ether ketone) (tBuPEEK), which does not undergo crystallization with thermal annealing, crystallizes readily when treated with compressed CO₂. The dissolved CO₂ causes a reduction in the glass‐transition temperature of the polymer–gas system and enhances the chain mobility of the macromolecules, thereby bringing about crystallization. In the presence of CO₂, crystallization is increasingly favored with increasing CO₂ pressure and treatment temperature. The melting point of tBuPEEK crystals increases linearly with the CO₂ pressure applied in the treatment, indicating an increase in the order and/or size of the crystals. The extent of crystallinity increases when small amounts of methanol or dichloromethane are used as a cosolute with CO₂. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1505–1512, 2001     

Poly(thiodiethylene adipate): Melting behavior,crystallization kinetics,morphology, and crystal structure

The melting behavior and crystallization kinetics of poly(thiodiethylene adipate) (PSDEA) were investigated with differential scanning calorimetry and hot‐stage optical microscopy. The observed multiple endotherms, commonly displayed by polyesters, were influenced by the crystallization temperature (T_c) and ascribed to melting and recrystallization processes. Linear and nonlinear treatments were applied to estimate the equilibrium melting temperature for PSDEA with the corrected values of the melting temperature. The nonlinear estimation yielded a higher value by about 9 °C. Isothermal crystallization kinetics were analyzed according to Avrami's treatment. Values of Avrami's exponent close to 3 were obtained, independently of T_c, in agreement with a crystallization process originating from predetermined nuclei and characterized by three‐dimensional spherulitic growth. As a matter of fact, space‐filling spherulites were observed by optical microscopy at all T_c's. The rate of crystallization became lower as T_c increased, as usual at a low undercooling, the crystallization process being controlled by nucleation. Moreover, the crystal structure of PSDEA was determined from powder X‐ray diffraction data by full profile fitting. A triclinic unit cell containing two polymer chains arranged parallel to the c axis was found. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 553–566, 2004     

Thermal analysis of lipids isolated from various tissues of sheep fats

The physical–chemical properties and fatty acid composition of sheep subcutaneous, tallow, intestinal, and tail fats were determined. Sheep fat types contained C_16:0, C_18:0, and C_18:1 as the major components of fatty acid composition (19.56–23.40, 20.77–29.50, 32.07–38.30%, respectively). Differential scanning calorimetry (DSC) study revealed that two characteristic peaks were detected in both crystallization and melting curves. Major peaks (T _peak) of tallow and intestinal fats were similar and determined as 31.25–24.69 and 7.44–3.90 °C, respectively, for crystallization peaks and 15.36–13.44 and 45.98–44.60 °C, respectively, for melting peaks in DSC curves; but those of tail fat (18.29 and −2.13 °C for crystallization peaks and 6.56 and 33.46 °C for melting peaks) differed remarkably from those of other fat types.     

Enhanced crystallization of poly(d-lactide) by xylan esters

The crystallization behavior of poly(d-lactide) loaded with xylan propionate (XylPr) and xylan butyrate (XylBu) was investigated. Non-isothermal crystallization study revealed that the crystallization temperature (T_c) of PDLA decreased by almost 30 °C when loaded with 1% XylPr or XylBu. PDLA blends containing 0.1% xylan ester produced similar results. Isothermal crystallization study suggests faster rate of crystallization of the PDLA blends as indicated by their t_1/2 values. The X_c values of the PDLA blends were also higher as compared to neat PDLA. However, the PDLA blends still possessed lower degrees of haze due to the presence of smaller spherulites. Based on TMA, PDLA blends exhibited better thermal stability than neat PDLA.     

Cracking in polylactide spherulites

A polylactide of high optical purity was crystallized between 100 and 140 °C, in‐between two glass slides, and its morphology was investigated by polarizing optical microscopy, scanning electron microscopy, and atomic force microscopy, during subsequent heating and cooling cycles between ?15 °C and the crystallization temperature. It was found that dark circular rings show up on cooling on top of the spherulites and represent cracks of about 300 nm in width. This phenomenon is completely reversible, and the heating–cooling curves are centered at about 56 °C, which coincide with the T_g of polylactide. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3308–3315, 2005     

Effects of amorphous poly(vinyl acetate) on crystalline morphology of poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid)

The amorphous and crystalline phase behavior, spherulite morphology, and interactions between amorphous poly(vinyl acetate) (PVAc) and poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid) (PHBV) were examined using differential scanning calorimetry, polarized-light optical and scanning electron, atomic-force microscopy (DSC, POM, SEM, AFM), and small-angle X-ray scattering (SAXS). The PHBV/PVAc blend was found to be miscible with an almost linear T _g-composition relationship, indicating perfect homogeneity. Interaction parameter by melting point depression is a negative value of χ = −0.32, suggesting quite favorable interaction strength. With the intimate interaction between the amorphous PVAc and crystalline PHBV polymers, effects of PVAc on the spherulitic morphology of PHBV are quite significant. Owing to the higher T _g of PVAc (than that of PHBV), the spherulite growth rate of PHBV was depressed by increasing PVAc content in blends. Neat PHBV exhibits ring-banded spherulites when crystallized at T_c = 60 ~ 110^° C {T_{\rm{c}}} = {6}0\sim {11}0^\circ {\hbox{C}} ; however, with increasing PVAc content in the blends, the temperature range at which the PHBV/PVAc blends exhibit ring-banded spherulites remains similar but the regularity increases, and the inter-ring spacing significantly decreases. In addition, the spherulite size and ring-band patterns therein are strongly dependent on T _max (190 vs. 220 °C, respectively, for erasing prior nuclei), from which the blends were quenched to a T _c (60–110 °C) for crystallization. For PHBV/PVAc blends crystallized at the same T _c from different T _max, higher T _max tends to erase nuclei, leading to larger spherulites. However, such larger spherulites owing to higher T _max are not necessarily packed with thicker lamellae.     

Crystallization of MgFe2O4 from a glass in the system K2O/B2O3/MgO/P2O5/Fe2O3

Spherical magnetic Mg-Fe-O nanoparticles were successfully prepared by the crystallization of glass in the system K₂O/B₂O₃/MgO/P₂O₅/Fe₂O₃. The magnetic glass ceramics were prepared by melting the raw materials using the conventional melt quenching technique followed by a thermal treatment at temperatures in the range 560–700 °C for a time ranging from 2 to 8 h. The studies of the X-ray diffraction, electron microscopy and FTIR spectra confirmed the precipitation of finely dispersed spherical (Mg, Fe) based spinel nanoparticles with a minor quantity of hematite (α-Fe₂O₃) in the glass matrix. The average size of the magnetic nano crystals increases slightly with temperature and time from 9 to 15 nm as determined by the line broadening from the XRD patterns. XRD studies show that annealing the glass samples for long periods of time at temperature ≥604 °C results in an increase of the precipitated hematite concentration, dissolution of the spinel phase and the formation of magnesium di-borate phase (Mg₂B₂O₅). For electron microscopy, the particles were extracted by two methods; (i) replica extraction technique and (ii) dissolution of the glass matrix by diluted acetic acid. An agglomeration of the nano crystals to larger particles (25–35 nm) was observed.     

The effect of molecular weight on the crystallization kinetics and equilibrium melting temperature of poly(tetramethylene ether glycol)

Isothermal crystallization of poly(tetramethylene ether glycol) (PTMEG) with relatively low molecular weight (M_n = 991, 2004 and 2864, respectively) was investigated by differential scanning calorimetry, and the equilibrium melting temperature (T) determined using the Hoffman–Weeks analysis. The crystallization kinetics of PTMEG were characterized using an Avrami analysis. Mechanistic n values ranged from 2.2 to 2.9 for the primary crystallization process for three molecular weight grades, indicating heterogeneous nucleation of spherulites. Polarized light microscopy confirmed that PTMEG crystallized by the growth of spherulites from heterogeneous nuclei. The half–life for crystallization (t_1/2) and the composite rate constant were found to be dependent on the degree of supercooling (ΔT) and the molecular weight. Copyright © 2006 John Wiley & Sons, Ltd.     

Effect of MMT,SiO2, CaCO3, and PTFE nanoparticles on the morphology and crystallization of poly(vinylidene fluoride)

The crystallization and melting behaviors of poly (vinylidene fluoride) (PVDF) with small amount of nanoparticles (1 wt %), such as montmorillonite (MMT), SiO₂, CaCO₃, or polytetrafluoroethylene (PTFE), directly prepared by melt‐mixing method were investigated by scanning electron microscopy (SEM), polarizing optical microscopy, Fourier transform infrared spectroscopy, wide angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC). The nanoparticle structure and the interactions between PVDF molecule and nanoparticle surface predominated the crystallization behavior and morphology of the PVDF. Small amount addition of these four types of nanoparticles would not affect the original crystalline phase obtained in the neat PVDF sample (α phase), but accelerated the crystallization rate because of the nucleation effect. In these four blend systems, MMT or PTFE nanoparticles could be well applied for PVDF nanocomposite preparation because of stronger interactions between particle surface and PVDF molecules. The nucleation enhancement and the growth rate of the spherulites were decreased in the order SiO₂ > CaCO₃ > PTFE > MMT. The melting and recrystallization of PVDF was found in MMT addition sample, because of the special ways of ordering of the PVDF chains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Preparative resolution of (±)-trans-1,2-diaminocyclohexane by means of preferential crystallization of its citrate monohydrate

Even if (±)-trans-1,2-diaminocyclohexane crystallizes as a conglomerate, its low melting point (?10 °C) and its sensitivity to light, CO₂, O₂, and moisture make this molecule difficult to resolve. It has been shown that the citrate monohydrate of this compound crystallizes as a stable conglomerate with a high thermal stability (up to 163 °C) with no drawbacks as to those listed above for the pure diamine. The crystal structure of this salt, resolved by single crystal X-ray diffraction, reveals structural features consistent with the thermal stability of this phase. Several preferential crystallization attempts (AS3PC) have been performed at a 100 ml scale and at a one liter scale in water with and without additives. Finally a productivity of 40 g per batch per liter of solvent per hour was achieved with a crude enantiomeric purity better than 90%. A simple recrystallization of the crude crops gives quantitatively the crystalline compound with an ee >99% proving the absence of partial solid solution at room temperature.     

Study on the effect of process parameters on CO2/CH4 binary gas separation performance over NH2-MIL-53(Al)/cellulose acetate hollow fiber mixed matrix membrane

The aim of current work is to study the interaction of process parameters including, temperature, CO₂ feed composition and feed pressure were towards CO₂ separation from CO₂/CH₄ binary gas mixture over hollow fiber mixed matrix membrane using design of experiment (DoE) approach. The hollow fiber mixed matrix membrane (HFMMM) containing NH₂-MIL-53(Al) filler and cellulose acetate polymer was successfully spun and fibers with outer diameter of approximately 250–290 nm were obtained. The separation results revealed that the increment of temperature from 30 °C to 50 °C reduced the CO₂/CH₄ separation factor while, increasing feed pressure from 3 bar to 15 and increment of CO₂ feed composition from 15 to 42.5 vol% increased the separation factor of HFMMM. The DoE results showed that the feed pressure was the most significant process parameter that intensely affected the CH₄ permeance, CO₂ permeance and CO₂/CH₄ separation factor. Based on the experimental results obtained, maximum CO₂ permeance of 3.82 GPU was achieved at feed pressure of 3 bar, temperature of 50 °C and CO₂ feed composition of 70 vol%. Meanwhile, minimum CH₄ permeance of 0.01 GPU was obtained at feed pressure of 15 bar and temperature of 30 °C and CO₂ feed composition of 70 vol%. Besides, maximum CO₂/CH₄ separation factor of 14.4 was achieved at feed pressure of 15 bar and temperature of 30 °C and CO₂ feed composition of 15 vol%. Overall, the study on the interaction between separation processes parameters using central composite design (CCD) coupled with response surface methodology (RSM) possesses significant importance prior to the application of NH₂-MIL-53(Al)/Cellulose Acetate HFMMM at industrial scale of natural gas purification.