Real-time sensing and three-dimensional display of far outdoor scenes based on asymmetric integral imaging

A new asymmetric integral imaging (AII) system for real-time pickup and three-dimensional (3-D) display of far outdoor scenes based on dynamic-pixel-mapping (DPM) is proposed. DPM is a digital process to transform the elemental images captured with a lens array into the perspective-variant object images (POIs) whose structures are matched with those of display lenses, where the orders of pixels in each POI are reversely mapped, and then capture a set of virtual elemental images (EIs) at the specific depth planes from the back-propagated POIs. This DPM enables an asymmetrical use of pickup and display lens arrays, allowing the long-ranged pickup of far outdoor scenes and their resolution-enhanced 3-D reconstruction. Experiments with a pair of pickup and display lens arrays whose pitches and focal lengths are given by 7.5 mm, 30 mm and 1.2 mm, 8 mm, respectively, show that the effective pickup-range and resolution of the proposed system have been increased up to 6 m and 1600×1600 pixels, respectively, from 0.064 m and 480×480 pixels of the conventional systems employing the same pickup and display lens arrays. In addition, experiments with an implemented test bed confirms that the proposed system can provide real-time 3-D images in 25 frames per second.     

Multichannel fiber laser Doppler vibrometer studies of low momentum and hypervelocity impacts

A multichannel optical fiber laser Doppler vibrometer was demonstrated with the capability of making simultaneous non-contact measurements of impacts at 3 different locations. Two sets of measurements were performed, firstly using small ball bearings (1 mm–5.5 mm) falling under gravity and secondly using small projectiles (1 mm) fired from an extremely high velocity light gas gun (LGG) with speeds in the range 1 km/s–8 km/s. Determination of impact damage is important for industries such as aerospace, military and rail, where the effect of an impact on the structure can result in a major structural damage. To our knowledge the research reported here demonstrates the first trials of a multichannel fiber laser Doppler vibrometer being used to detect hypervelocity impacts.     

Atomic resolution imaging of oxygen atoms close to heavy atoms by HRTEM and ED,using the superconductor SmFeAsO0.85F0.15 as an example

Imaging of light atoms has always been a challenge in high-resolution electron microscopy. Image resolution is mainly limited by lens aberrations, especially the spherical aberration of the objective lens. Image deconvolution could correct for the image distortion by lens aberrations and restore the structure projection, the resolution of which is limited by the information limit of the microscope. Electron diffraction unrestricted by lens aberrations could overcome this resolution limit. Here we show a combination of electron diffraction and image deconvolution to reveal simultaneously the atomic columns of O and considerably heavier Sm at a very close distance (1.17 Å) in iron-based superconductor SmFeAsO_0.85F_0.15 using a conventional 200 kV electron microscope. The approach used here, starting from an image and an electron diffraction pattern, has an advantage for those radiation-sensitive samples. Besides, it can be applied to simultaneously imaging light and heavy atoms, even though they have a big difference in atomic number and a much smaller atomic distance than the microscope resolution.     

Performance analysis of a swept-source optical coherence tomography system with a quadrature interferometer and optical amplification

A performance analysis of signal to noise ratio for an optical coherence tomography system with quadrature detection and a semiconductor optical amplifier in the sample arm is discussed. The results are compared and discussed in relation to a conventional OCT system (without optical amplification). An increase of the signal to noise ratio up to 14 dB at a depth of 0.5 mm is obtained compared to the system without the optical amplifier. Overall, an improvement was demonstrated for signal coming from deeper regions within the samples. Arterial plaque from a myocardial infarction-prone Watanabe heritable hyperlipidemic (WHHLMI) rabbit is visualized and characterized using this system. Improvement of signal to noise ratio increases the penetration depth possible for OCT images, from 1 mm to 2 mm within the vessel wall of an artery. Preliminary results show that vulnerable plaque with fibrous cap, macrophage accumulations and calcification in the arterial tissue are measurable with this OCT system.     

Single-body lensed photonic crystal fibers as side-viewing probes for optical imaging systems

We report the fabrication and performance of a lensed photonic crystal fiber (PCF) designed as a compact but effective side-viewing optical imaging probe. The lensed-PCF probe was implemented in a single body without using any other fibers or additional optics. The beam expansion region and a focusing ball lens, necessary for a focuser, were simultaneously formed along a small piece of PCF by applying arc discharges. The side-viewing ability was provided by polishing the ball lens with a femtosecond laser to form a total internal reflection surface. The working distance and the transverse resolution of the fabricated single-body lensed-PCF were experimentally measured to be 570 and 6.8 microm, respectively. With the proposed lensed-PCF probe, optical coherence tomography images of an in vitro biological sample were successfully obtained.     

Ultrasonic imaging using air-coupled P(VDF/TrFE) transducers at 2 MHz

A reflection non-contact ultrasonic microscope system working both in amplitude and phase difference modes at 2 MHz has been developed using an air-coupled concave transducer made of piezoelectric polymer films of poly(vinylidene fluoride/trifluoroethylene) [P(VDF/TrFE)]. The transducer is composed of three 95 μm-thick P(VDF/TrFE) films stacked together, each of which is activated electrically in parallel by a driving source. The transducer has a wide aperture angle of 140° and a focal length of 10 mm. The measured two-way transducer insertion loss is 80 dB at 1.83 MHz. Despite 20 dB higher insertion loss than that estimated from Mason’s equivalent circuit, we have obtained clear amplitude acoustic images of a coin with transverse resolution of 150 μm, and clear phase difference acoustic images of the rough surface of a paper currency bill with depth resolution of sub-micrometer. Using two planar transducers of P(VDF/TrFE), we have also successfully measured in through-transmission mode the sound velocity and absorption of a 3 mm-thick silicone-rubber plate. The present study proves that, owing to its low acoustic impedance and flexibility, P(VDF/TrFE) piezoelectric film is very useful for high frequency acoustic imaging in air in the MHz range.     

Twist sensor based on Sagnac single-mode optic fiber interferometer

An optical fiber twist sensor based on Sagnac single-mode optic fiber interferometer is proposed. The stress-induced birefringence of single-mode optical fiber is obtained by applying a transverse force against a short length of singlemode fiber. A high sensitivity and resolution of the twist angle measurement of 0.19 nm/° and 0.002° is achieved experimentally, respectively. The proposed sensor is more convenient and simple than that of standard polarization-maintaining fibers.     

Optical coherence tomography based imaging of dental demineralisation and cavity restoration in 840 nm and 1310 nm wavelength regions

In this paper, a study of in-house built optical coherence tomography (OCT) system with a wavelength of 840 nm for imaging of dental caries, progress in demineralisation and cavity restoration is presented. The caries when imaged with the 840 nm OCT system showed minute demineralisation in the order of 5 μm. The OCT system was also proposed to study the growth of lesion and this was demonstrated by artificially inducing caries with a demineralisation solution of pH 4.8. The progress of carious lesion to a depth of about 50–60 μm after 60 hours of demineralisation was clearly observed with the 840 nm OCT system. The tooth samples were subjected to accelerated demineralisation condition at pH of approximately 2.3 to study the adverse effects and the onset of cavity formation was clearly observed. The restoration of cavity was also studied by employing different restorative materials (filled and unfilled). In the case of restoration without filler material (unfilled), the restoration boundaries were clearly observed. Overall, results were comparable with that of the widely used 1310 nm OCT system. In the case of restoration with filler material, the 1310 nm OCT imaging displayed better imaging capacity due to lower scattering than 840 nm imaging.     

Experimental research on an arbitrary pulse generation system for imaging VISAR

Imaging VISAR is an important diagnostic tool for a variety of shock-related phenomena in laser-driven experiments. To adapt to various types of shaped driven pulse, the imaging VISAR needs an illuminating light with good shaping capability. Here, a flexible laser probe system was experimentally studied. Being generated from a 1064-nm DFB laser, the continuous wave was modulated by a waveguide amplitude modulator driven by 10 GS/s arbitrary waveform generator. After being amplified by fiber amplifiers and Nd:YAG rod amplifiers, the signal pulse was frequency-converted to 532-nm green light by a thermally controlled LBO crystal with a final output energy larger than 10 mJ. Finally, the green light was coupled into a 1-mm core diameter, multimode fused silica optical fiber and propagated to the imaging VISAR. The probe laser could realize accurate pulse shaping with time resolution below 100 ps. Uniformity in intensity and capability of arbitrary pulse shaping provides great convenience for the analysis of experimental data.     

Development of high resolution 3D hyperpolarized carbon-13 MR molecular imaging techniques

The goal of this project was to develop and apply techniques for T₂ mapping and 3D high resolution (1.5 mm isotropic; 0.003 cm³) ¹³C imaging of hyperpolarized (HP) probes [1-¹³C]lactate, [1-¹³C]pyruvate, [2-¹³C]pyruvate, and [¹³C,¹⁵N₂]urea in vivo. A specialized 2D bSSFP sequence was implemented on a clinical 3T scanner and used to obtain the first high resolution T₂ maps of these different hyperpolarized compounds in both rats and tumor-bearing mice. These maps were first used to optimize timings for highest SNR for single time-point 3D bSSFP acquisitions with a 1.5 mm isotropic spatial resolution of normal rats. This 3D acquisition approach was extended to serial dynamic imaging with 2-fold compressed sensing acceleration without changing spatial resolution. The T₂ mapping experiments yielded measurements of T₂ values of > 1 s for all compounds within rat kidneys/vasculature and TRAMP tumors, except for [2-¹³C]pyruvate which was ~ 730 ms and ~ 320 ms, respectively. The high resolution 3D imaging enabled visualization the biodistribution of [1-¹³C]lactate, [1-¹³C]pyruvate, and [2-¹³C]pyruvate within different kidney compartments as well as in the vasculature. While the mouse anatomy is smaller, the resolution was also sufficient to image the distribution of all compounds within kidney, vasculature, and tumor. The development of the specialized 3D sequence with compressed sensing provided improved structural and functional assessments at a high (0.003 cm³) spatial and 2 s temporal resolution in vivo utilizing HP ¹³C substrates by exploiting their long T₂ values. This 1.5 mm isotropic resolution is comparable to ¹H imaging and application of this approach could be extended to future studies of uptake, metabolism, and perfusion in cancer and other disease models and may ultimately be of value for clinical imaging.     

Single image rectification of thermal images for geometric studies in façade inspections

This work presents a photogrammetric technique that provides geometric and thermal information about building façades. It uses low cost and portable scale bars, specially designed for thermal imaging, and processing software based on single image rectification. Image rectification corrects the original photo displacement due to the projection and perspective, and radial distortions introduced by the lens of the camera.The technique is tested by comparing laser scanning and thermal data. Seven segments of different orientation and length are selected for the measurement. Accuracy tests show errors between 44 mm and 151 mm. Precision values range between 22 mm and 61 mm for a maximum length of 7259 mm. The accuracy and precision results obtained for the technique open the possibility of extending its use to building inspection tasks.     

Research on the optical fiber gas flowmeters based on intermodal interference

In this work, a self-heating type optical fiber flowmeter with high sensitivity was proposed. The core-offset fiber structures were employed to couple a part of signal light into the fiber cladding layer, and the other part of light still propagated in the core layer. The intermodal interference between the two parts of light happened when the cladding modes were coupled back into core layer. Meanwhile, the high power laser was also introduced into fiber to heat the silver film coated on the surface of the cladding layer. When the cool gas flow passed, the temperature of the sensor probe decreased due to the heat transfer process. Because of the thermo-optic effect in the fiber, interference spectrum could be shifted when the temperature was changed. The experimental results showed the resolution of the proposed sensor was 2×10⁻² m/s in the region of 0–8 m/s. The highest sensitivity could achieve 1537 pm/(m/s).     

Investigation of optimum condition in oxygen gas-assisted laser cutting

Laser cutting characteristics including power level and cutting gas pressure are investigated in order to obtain an optimum kerf width. The kerf width is investigated for a laser power range of 50–170 W and a gas pressure of 1–6 bar for steel and mild steel materials. Variation of sample thickness, material type, gas pressure and laser power on the average cut width and slot quality are investigated. Optimum conditions for the steel and mild steel materials with a thickness range of 1–2 mm are obtained. The optimum condition for the steel cutting results in a minimum average kerf width of 0.2 mm at a laser power of 67 W, cutting rate of 7.1 mm/s and an oxygen pressure of 4 bar. A similar investigation for the mild steel cutting results in a minimum average kerf width of 0.3 mm at the same laser power of 67 W, cutting rate of 9.5 mm/s, and an oxygen pressure of 1 bar. The experimental average kerf is about 0.3 mm, which is approximately equal to the estimated focused beam diameter of 0.27 mm for our focusing lens (f=4 cm and 100 W power). This beam size leads to a laser intensity of about 1.74×10⁹ W/m² at the workpiece surface. The estimated cutting rate from theoretical calculation is about 8.07 mm/s (1.0 mm thickness and 100 W power), which agrees with the experimental results that is 7.1 mm/s for 1.0 mm thickness of mild steel at the laser power of 88 W.     

Double domain wavelength multiplexed Fizeau interferometer with high resolution dynamic sensing and absolute length detection

In this work, we present a simple photonic instrument that has the ability of measuring positions, distances and vibrations with very high resolution by means of two Fizeau interferometers (FI), both using the same optical fiber end as a probe tip itself. On the one hand we have a time domain FI powered with a 1310 nm laser and monitored by an InGaAs detector providing displacement information with resolution around a tenth of nm but regardless of the absolute position of object and of the displacement sense. On the other, a spectral domain FI version based on a super luminescent source (SLED) centred at 800 nm with bandwidth of nearly 40 nm is analysed in real time by means of a digital spectrometer. Each spectrum is acquired in a very small time interval and provides information of both length of the cavity as well as its correct sense of evolution. Resolution of this system is lower than its complementary temporal case, but distance and sense measurements are absolute and can be determined successfully by adequate processing of spectral signal.Both interferometers are optically coupled to a single fiber optic probe and are wavelength modulated.Therefore, combination of both sensors results in a new one which allows the correct knowledge of an object or surfaces under test, i.e. a high resolution of displacement data plus its absolute position and true sense of movement.     

A long-range,high-resolution optical coherence tomography for physical and environmental measurements

Optical coherence tomography (OCT) is an emerging optical imaging technique that is applied with low coherence interference to perform noninvasive, high-resolution images on internal and surface structures. In this study, we built an optical coherence system and developed a combined envelope-fringe and carrier-fringe technique that can take advantage of high-resolution and long-range for taking physical and environmental measurements. The proposed system demonstrated that the detection resolution of the changes of the refractive index was 1.89 × 10^? 4 for the long-range set-up (i.e. using the envelope-fringe only), and 4.15 × 10^? 5 for the high-resolution set-up (i.e. using the carrier-fringe). In addition, we successfully applied the system to measure the refractive index of a body of water, as the index for determining the pollution condition of different lakes.     

A new cross-protection dual-WDM-PON architecture with carrier-reuse colorless ONUs

This paper proposes a new cross-protection colorless dual-WDM-PON architecture. The proposed protection scheme can provide 1 + 1 downstream protection and 1:1 upstream protection against both feeder fiber and distribution fiber failures by using the fiber links and AWGs of the neighboring WDM-PON. Wavelength is reused for the down- and up-stream transmissions in dual-WDM-PONs where gain-saturated reflective semi-conductor optical amplifiers (RSOAs) are employed as colorless transmitters in ONUs. The number of extra protection fibers is minimized and wavelength is much more efficiently utilized compared with other protection schemes. The feasibility and operation of the proposed dual-WDM-PON architecture are experimentally verified with 1.25 Gb/s for upstream and 2.5 Gb/s for downstream over 20 km single mode fiber transmission in both working and protection modes.     

Remote and high precision step height measurement with an optical fiber multiplexing interferometric system

An optical fiber multiplexing low coherence and high coherence interferometric system, which includes a Fizeau interferometer as the sensing element and a Michelson interferometer as the demodulating element, is designed for remote and high precision step height measurement. The Fizeau interferometer is placed in the remote field for sensing the measurand, while the Michelson interferometer which works in both modes of low coherence interferometry and high coherence interferometry is employed for demodulating the measurand. The range of the step height is determined by the low coherence interferometry and the value of it is measured precisely by the high coherence interferometry. High precision has been obtained by searching precisely the peak of the low coherence interferogram symmetrically from two sides of the low coherence interferogram and stabilizing the Michelson interferometer with a feedback loop. The maximum step height that could be measured is 6 mm while the measurement resolution is less than 1 nm. The standard deviation of 10 times measurement results of a step height of 1 mm configurated with two gauge blocks is 0.5 nm.     

Large-range liquid level sensor based on an optical fibre extrinsic Fabry–Perot interferometer

We propose an efficient approach to develop large-range liquid level sensors based on an extrinsic Fabry–Perot optical fibre interferometer with an all fused-silica structure and CO₂ laser heating fusion bonding technology. The sensor exhibits signatures of a high sensitivity of 5.3 nm/kPa (36.6 nm/psi), a resolution of 6.8 Pa (9.9×10⁻⁴ psi) and an extreme low temperature dependence of 0.013 nm/°C. As a result, a high resolution of the water level measurement of approximately 0.7 mm on the length scale of 5 m and small errors of the water pressure measurement induced by the temperature dependence within 0.0025 kPa/°C (0.00036 psi/°C, water level 0.25 mm/°C) are achieved, thus providing useful applications for the detection of the large-range liquid level in harsh environments.     

A thin film magnetic field sensor of sub-pT resolution and magnetocardiogram (MCG) measurement at room temperature

We developed a very sensitive high-frequency carrier-type thin film sensor with a sub-pT resolution using a transmission line. The sensor element consists of Cu conductor with a meander pattern (20 mm in length, 0.8 mm in width, and 18 μm in thickness), a ground plane, and amorphous CoNbZr film (4 μm in thickness). The amplitude modulation technique was employed to enhance the magnetic field resolution for measurement of the high-frequency field (499 kHz), a resolution of 7.10×10^?13 T/Hz^1/2 being achieved, when we applied an AC magnetic field at 499 kHz. The phase detection technique was applied for measurement of the low frequency field (around 1 Hz). A small phase change was detected using a dual mixer time difference method. A high phase change of 130°/Oe was observed. A magnetic field resolution of 1.35×10^?12 T/Hz^1/2 was obtained when a small AC field at 1 Hz was applied. We applied the sensor for magnetocardiogram (MCG) measurement using the phase detection technique. We succeeded in measuring the MCG signal including typical QRS and T waves, and compared the MCG with a simultaneously obtained conventional electrocardiogram (ECG) signal.     

Noncontact characterization of glucose by a waveguide microwave probe

We investigate the electromagnetic field interaction with a glucose aqueous solution using a microwave dielectric waveguide probe to evaluate the glucose concentrations. A microwave dielectric waveguide probe allows observation of the small variation of the glucose concentration changes in the range of 0–300 mg/ml by measuring the change of the microwave reflection coefficient. We could observe the effect of concentration change of glucose with a detectable resolution up to 0.5 mg/ml at an operating frequency of about f = 2.0–2.5 GHz. The change of the glucose concentration is directly related to the change of the reflection coefficient due to the electromagnetic interaction between the dielectric waveguide resonator and the glucose aqueous solution. The operational principal is explained by a plane-wave solution model. A glucose biosensor using a microwave dielectric waveguide probe provides a unique approach for glucose monitoring.