用于WDM光突发交换网的改进JIT信令协议

提出了一种用WDM光突发交换网的良好时间通信协议(MJIT-SP)该协议结合了光线路交换和光分组交换的优点与用于光突发交换的其他信令协议相似,MJIT-SP的特点也是采用带外控制信号处理来排除核心节点处对光缓存器的需求然而,与其它协议如JIT-SP相比,它能最小化数据源端的建立时间和最大化交叉连接的带宽利用率而且,MJIT-SP还能支持光网络中无连接和面向连接的数据包传递并介绍了MJIT-SP的基本结构并从三个方面分析了它的基本性能,即建立时间、端到端延时和信道占用时间然后,对本协议与JIT-SP的性能进行了比较,结果显示:MJIT-SP不仅优于JIT-SP,而且还克服了JIT-SP的一个缺点,即过长的信道占用时间此外,还给出了MJIT-SP的信令信息,尤其是非常关键的信号与脉座电平差(SETUP)消息MJIT-SP中的SETUP与JIT-SP中的SETUP不同,它需要给出数据包路由和交换所需的信息,包括数据包长度、比特率、SETUP与数据包之间的偏置时间以及数据业务的质量控制系统(QoS)要求等最后讨论了MJIT-SP两种可能的变化并且分析了它们的优缺点.     

Effects of the switching time in OPS/OBS networks

In this paper we present an analytical model, which considers the effects of the switching time on the network performance in service differentiated optical packet/burst switching (OPS/OBS) networks. Our results indicate that the switching time must be less than 10 % of the packet/burst duration in order to avoid any significant reductions in the network performance. Furthermore, regarding a network with full wavelength conversion, we show that the benefits of statistical resource sharing are almost non-existent for low priority traffic when the switching time is large.     

An optimal burst assembly approach employing traffic shaping (OBATS) for OBS

Optical burst switching (OBS) aims at combining the strengths of packet and circuit switching and is considered as a promising technology for implementing the next generation optical Internet, required to cope with the rapid growth of Internet traffic and the increased deployment of new services. In this paper, an optimal burst assembly approach employing traffic shaping (OBATS) for OBS networks has been proposed in order to improve network performance in terms of reduced blocking probability, congestion control and better utilization of bandwidth. Particularly, the proposed scheme aims at reducing the average delay experienced by the packets during the burstification process in optical burst switched (OBS) networks, for a given average size of the bursts produced. Reducing the packet burstification delay, for a given average burst size, is essential for real-time applications; correspondingly, increasing the average burst size for a given packet burstification delay is important for reducing the number of bursts injected into the network and the associated overhead imposed on the core nodes. Simulation results show that the proposed burst assembly approach gives better network performance in terms of burst drop, resource contention and delay as compared to conventional burst assembly approaches.     

Hybrid OCS/OBS interconnect in intra-data-center network

We report on a data center network(DCN) architecture based on hybrid optical circuit switching(OCS) and optical burst switching(OBS) interconnect for dynamic DCN connectivity provisioning. With the combination of the centralized and distributed control of the software-defined optical networks, the proposed interconnect can achieve unprecedented flexibility in dealing with both mice and elephant flow in the DCN. Numerical simulation is employed to investigate the performance of the proposed architecture. The results show that the OBS module has preferable performance in dealing with a larger burst packet, and the throughput is constrained by the capacity of the server random access memory module.     

Huge capacity spacial division multiplexing transmission and integrated optical switching technologies(Invited Paper)

We review the research and development of beyond Pb/s capacity space-division-multiplexed transmission technology using multi-core optical fibers for satisfying the ever-increasing traffic demand. Moreover, we present an optical packet and circuit integrated network technology to improve switching capacity and flexibility in network nodes for the rapid traffic fluctuation and the data service diversification.     

Dynamically selective multiwavelength cross-connect based on fibre Bragg gratings and mechanical optical switches

A dynamically selective multiwavelength cross-connect for wavelength division multiplexed (WDM) networks based on fibre Bragg gratings (FBGs) and optical switches is reported. Dynamically single- or multi-channel cross-connect functionality can be realized according to control of the optical switches and the FBGs' arrangement. Bit-error-rate performance with negligible power penalty is achieved in a 2.5Gbs-1x3 WDM channels over 100km conventional single-mode fibre (SMF) network demonstration. The characteristics of low channel crosstalk, uniform channel loss, high scalability and cascadability, and low cost of this device could provide more reconfiguration flexibility and network survivability for WDM networks.     

Design and performance evaluation of a metro WDM storage area network with IP datagram support

Storage area networks (SANs) are becoming an important part of optical MANs (metropolitan area networks). Growing storage and business-continuity needs; high-bandwidth, low latency requirements for SANs; storage infrastructure consolidation; and post-9/11 regulatory issues are among the several driving factors to push this trend. We, in this paper, consider a metro wavelength division multiplexing (WDM) SAN that allows the transmission of variable packet size such as Internet protocol (IP) datagram and evaluate its performance by means of discrete-event simulation. The network is based on one fixed transmitter and multiple fixed receivers. Beginning with an introduction and the context of this work, we describe the network and node architectures; and introduce the medium access control (MAC) protocols. Subsequently, using the Poisson and self-similar traffic, we present and discuss performance of the proposed network architecture in terms of throughput and queuing delay under symmetric and asymmetric traffic scenarios. The simulation results suggested that the proposed architecture is suitable for SAN applications which demand low queuing delay and high throughput.     

一种新的光突发交换网络信令协议与分析

提出了一种新的光突发交换网络信令协议,即DSH区分服务混合信令.根据实时（电路仿真）业务和非实时（数据）业务对QoS的不同要求分别采用TAW和JET信令控制协议,尤其是对TAW信令做了相应改进,使之更适合于OBS网络承载电路仿真业务.利用电路仿真业务发出的呼叫请求,在端到端的波长通道中建立虚通路,并在整个呼叫持续过程中保持虚通路的连接,这样可以保证电路仿真业务的端到端时延最小并避免信息丢失.通过理论分析和系统仿真,研究了DSH混合信令的性能及其对波长利用率和实时业务呼损率的影响.     

ATMOS (ATM optical switching)—system perspective

The expected traffic growth from new broadband services will require network capacities that can be beneficially provided by optical WDM transport networks. Optical packet techniques are essential for large networks to provide flexibility and granularity. A layered network architecture with a transparent optical layer and optical packet layers has been elaborated. Four switching concept options for large optical ATM switch fabrics in the public network and small access nodes are presented. The technology for the related key functions of space and wavelength switching was developed in the RACE ATMOS project and the feasibility of concepts and technologies was verified in four system demonstrators.     

Performance enhancement of optical burst switched networks

Optical burst switching (OBS) is an optical switching paradigm which offers a good tradeoff between the traditional optical circuit switching (OCS) and optical packet switching (OPS) since it has the relatively easy implementation of the first and the efficient bandwidth utilization of the second. Hence, OBS is a promising technology for the next generation optical Internet. A buffer-less OBS network can be implemented using ordinary optical communication equipment without the need for either wavelength converters or optical memories. In an OBS network, burst-loss performance is a critical concern. In OBS, the data-burst transmission is delayed by an offset time (relative to its burst control packet (BCP), or header) and the burst follows its header without waiting for an acknowledgment for resource reservation. Thus, a burst may be lost at an intermediate node due to contention, which is generally resolved according to the local routing and bandwidth information. The routing table maintained in each OBS node is generally pre-computed and fixed to forward the data bursts. Such a static forwarding feature might have limited efficiency to resolve contentions. Moreover, a burst may be lost and the network may be congested when a network element (e.g., fiber link) fails. In this paper, an efficient integrated scheme based on dynamic routing and burst segmentation has been proposed to improve reliability of data transport and network load balancing in optical burst switched networks. Simulation results demonstrate that the proposed approach reduces effectively blocking probability and hence contention. Further, it provides end-to-end throughput performance also. Hence, it establishes an appropriate tradeoff between loss rate and end-to-end throughput.     

All-optical implementations for high-capacity TDMA networks

In this article we show how optical technology can allow the design of new optical devices that are able to perform some network functions in order to treat very high bit rate signals (100 Gbit/s). The multiplexing technique that we take into account is the Time Division Multiple Access (TDMA), and the network functions we consider are multiplexing, demultiplexing, synchronization, packet decoding, routing, and resolution of packet contention.

In order to show how these new optical devices can improve the network performance we propose two different network topologies: the first concerns a TDMA star network where the signal information is simultaneously broadcast to all users, while the second is a multihop network. The former is useful mainly for circuit switching, while the latter is suitable for packet switching.

Soliton propagation is used in order to avoid the problem of fiber chromatic dispersion.     

Analysis of Wavelength-Routed Optical Burst-Switched Network Performance

This paper studies a novel scalable network architecture combining optical burst switching (OBS) with dynamic wavelength allocation to guarantee quality of service (QoS), forming a wavelength-routed optical burst-switched network. All processing and buffering functions are concentrated at the network edge and bursts are assigned to fast tuneable lasers and routed over a bufferless optical transport core using dynamic wavelength assignment. Different burst aggregation mechanisms are evaluated for a range of traffic statistics in terms of delay and packet loss rate. New network performance parameters in an analytical model quantify the advantages of dynamic wavelength allocation. The results define the operational gain achievable with dynamic wavelength assignment compared to quasi-static wavelength routed optical networks.     

Performance analysis of an integrated scheme in optical burst switching high-speed networks

A new integrated scheme based on resource-reservation and adaptive network flow routing to alleviate contention in optical burst switching networks is proposed. The objective of the proposed scheme is to reduce the overall burst loss in the network and at the same time to avoid the packet out-of-sequence arrival problem. Simulations are carried out to assess the feasibility of the proposed scheme. Its performance is compared with that of contention resolution schemes based on conventional routing. Through extensive simulations, it is shown that the proposed scheme not only provides significantly better burst loss performance than the basic equal proportion and hop-length based traffic routing algorithms, but also is void of any packet re-orderings.     

Variable time-period optical switching:a novel OBS implementation

In this paper, we proposed a novel optical switching method based on optical burst switching (OBS), we call it variable time-period optical switching (VTPOS). It can both support circuit services and other immerged packet services. It has better usability of bandwidth, shorter offset and latency time than others of unidirectional transport signaling mechanisms for OBS. It supports deflection switching for improve blocking performance without the need of schedule buffer. It introduces a time pointer and phase indicator that made synchronous more precisely and requires less guard time, it also classifies the different services classes with a relative QoS model.     

Network traffic behaviour near phase transition point

We explore packet traffic dynamics in a data network model near phase transition point from free flow to congestion. The model of data network is an abstraction of the Network Layer of the OSI (Open Systems Interconnect) Reference Model of packet switching networks. The Network Layer is responsible for routing packets across the network from their sources to their destinations and for control of congestion in data networks. Using the model we investigate spatio-temporal packets traffic dynamics near the phase transition point for various network connection topologies, and static and adaptive routing algorithms. We present selected simulation results and analyze them.     

Analysis of Wavelength-Routed Optical Burst-Switched Network Performance

This paper studies a novel scalable network architecture combining optical burst switching (OBS) with dynamic wavelength allocation to guarantee quality of service (QoS), forming a wavelength-routed optical burst-switched network. All processing and buffering functions are concentrated at the network edge and bursts are assigned to fast tuneable lasers and routed over a bufferless optical transport core using dynamic wavelength assignment. Different burst aggregation mechanisms are evaluated for a range of traffic statistics in terms of delay and packet loss rate. New network performance parameters in an analytical model quantify the advantages of dynamic wavelength allocation. The results define the operational gain achievable with dynamic wavelength assignment compared to quasi-static wavelength routed optical networks.     

光纤延迟线和可调谐波长转换器在光分组交换网络竞争解决结构中的性能分析

研究了光分组交换网络中的两种竞争解决方案.结合课题研究的进展,基于突发和非突发业务,对这两种竞争处理结构进行了深入分析,得出了几点重要结论,首先,在竞争处理上,对于非突发业务,光纤延迟线比可调谐波长转换器有效;而对于突发业务而言,可调谐波长转换器比光纤延迟线有效.其次,在突发业务下反馈式光纤延迟线结构（FFA）是一种较为理想的竞争解决结构,但对非突发业务而言,反馈式光纤延迟线和可调谐波长转换器结构（FFTA）在成本上和结构尺寸上比FFA要有效的多.随着平均突发长度的增加,FFTA中的可调谐波长转换器数目也要增加才能获得合理的分组丢失率。但无论是针对突发业务还是非突发业务,FFTA都是一种成本有效的竞争解决结构.     

An optimal protection and restoration scheme (OPARS) for optical networks

Protection and restoration are critical network design issues for optical networks since even a single failure for a short duration may result in huge data loss due to the large capacity of optical fibers. However, few studies have been done on these issues for optical burst switching (OBS) networks. Protection and restoration are essential mechanisms for guaranteeing more reliable traffic delivery services. But it is not easy to apply existing mechanisms to optical burst switching (OBS) networks due to its one-way reservation signaling and the statistical burst multiplexing. Thus, to achieve the high transmission performance and reliability simultaneously, unique properties of OBS must be considered in the design of protection scheme. In this paper, an optimal protection and restoration scheme (OPARS) has been introduced that not only optimizes the number of provisioned protection wavelengths adaptively based on the traffic load as well as the quality of service (QoS) requirements of bursts in high speed networks but also minimizes burst loss rates. In addition, the proposed scheme has been used as an efficient contention resolution technique. The simulation results verify that the proposed scheme improve the network resource and channel utilization while guaranteeing the targeted protection reliability and QoS requirements of bursts.     

Performance analysis of modified optical burst switching (OBS) ring network using dummy node

In the present paper an analytical model of an optical burst switching ring network which is capable to handle the variable incoming traffic intelligently is presented. An efficient node architecture and network operating protocol enhances the data throughput in a congested network. Here we propose a node architecture to ease the traffic congestion in a ring network involving a dummy server connected to backbone of the ring topology to ease the traffic flow into the ring by diverting the packets under the congestion situation. An appropriate mathematical model for the proposed node architecture has been developed employing packet queuing control to estimate the amount of carried traffic for different node parameters and the analysis has been further extended to investigate the network performance under different signaling techniques.     

Cost-effective combination of contention resolution/avoidance schemes in bufferless slotted OPS networks

Contention is a major problem for Optical Packed Switched (OPS) networks. Many studies have shown that to obtain a very small optical packet loss rate, a large number of specific contention resolution or contention avoidance hardware must be used. However, this may not be so cost-effective. Instead of using the same technique to achieve a very low packet loss rate, the idea of this paper is to use the combination of different contention avoidance and contention resolution schemes, but using a lower amount of each scheme, to reduce packet loss rate in slotted bufferless OPS networks. A number of cost-effective contention resolution and avoidance schemes are studied in order to decrease traffic loss and increase TCP throughput as a result. Designing a multi-fiber architecture that uses inexpensive shared-per-node wavelength converters and additional drop-ports can significantly reduce network-wide traffic loss. The lost traffic can also be retransmitted in the optical domain in order to have a loss-free OPS network. A cost model is also provided to obtain cost-effective combinations of fibers, wavelength converters and drop ports under a desirable TCP throughput and investment on network hardware. The effectiveness of the combined contention avoidance and resolution schemes are demonstrated under Internet traffic.