Anti-symmetric waves in pre-stressed imperfectly bonded incompressible elastic layered composites

The effect of an imperfect interface on the dispersive behavior of in-plane time-harmonic symmetric waves in a pre-stressed incompressible symmetric layered composite, was analyzed recently by Leungvichcharoen and Wijeyewickrema (2003). In the present paper the corresponding case for time harmonic anti-symmetric waves is considered. The bi-material composite consists of incompressible isotropic elastic materials. The imperfect interface is simulated by a shear-spring type resistance model, which can also accommodate the extreme cases of perfectly bonded and fully slipping interfaces. The dispersion relation is obtained by formulating the incremental boundary-value problem and using the propagator matrix technique. The dispersion relations for anti-symmetric and symmetric waves differ from each other only through the elements of the propagator matrix associated with the inner layer. The behavior of the dispersion curves for anti-symmetric waves is for the most part similar to that of symmetric waves at the low and high wavenumber limits. At the low wavenumber limit, depending on the pre-stress for perfectly bonded and imperfect interface cases, a finite phase speed may exist only for the fundamental mode while other higher modes have an infinite phase speed. However, for a fully slipping interface in the low wavenumber region it may be possible for both the fundamental mode and the next lowest mode to have finite phase speeds. For the higher modes which have infinite phase speeds in the low wavenumber region an expression to determine the cut-off frequencies is obtained. At the high wavenumber limit, the phase speeds of the fundamental mode and the higher modes tend to the phase speeds of the surface wave or the interfacial wave or the limiting phase speed of the composite. The bifurcation equation obtained from the dispersion relation yields neutral curves that separate the stable and unstable regions associated with the fundamental mode or the next lowest mode. Numerical examples of dispersion curves are presented, where when the material has to be prescribed either Mooney–Rivlin material or Varga material is assumed. The effect of imperfect interfaces on anti-symmetric waves is clearly evident in the numerical results.     

Dispersion effects of extensional waves in pre-stressed imperfectly bonded incompressible elastic layered composites

The effect of an imperfect interface, on time-harmonic extensional wave propagation in a pre-stressed symmetric layered composite is considered. The bimaterial composite consists of incompressible isotropic elastic materials. The shear spring type resistance model employed to simulate the imperfect interface can accommodate the extreme cases of perfect bonding and a fully slipping interface. The dispersion relation obtained by formulating the incremental boundary-value problem and the use of the propagator matrix technique, is analyzed at the low and high wavenumber limits. For the perfectly bonded and imperfect interface cases in the low wavenumber region, only the fundamental mode has a finite phase speed, while other higher modes have an infinite phase speed when the dimensionless wavenumber approaches zero. However, for the fully slipping interface in the low wavenumber region, both the fundamental mode and the next lowest mode have finite phase speeds. In the high wavenumber region, when the dimensionless wavenumber tends to infinity, the phase speeds of the fundamental mode and the higher modes depend on the phase speeds of the surface and interfacial waves and on the limiting phase speed of the composite. An expression to determine the cut-off frequencies is obtained from the dispersion relation. Numerical examples of dispersion curves are presented, where when the material has to be prescribed either Mooney–Rivlin material or Varga material is assumed. The effect of the imperfect interface is clearly evident in the numerical results.     

On SH waves in a pre-stressed layered half-space for an incompressible elastic material

The propagation of Love waves along the boundary between a half-space and a layer of different pre-stressed material is examined for incompressible isotropic elastic materials. The secular equation is obtained for a general strain-energy function and analysed for particular deformations and materials. For the neo-Hookean strain-energy function, numerical results are obtained to illustrate the dependence of the wavespeed on the wave number and on the deformation.     

Resonant-triad instability of a pre-stressed incompressible elastic plate

The dynamic stability properties of a pre-stressed incompressible elastic plate are studied in this paper with respect to perturbations in the form of one near-neutral mode and two non-neutral modes interacting resonantly. The pre-stresses are assumed to be an all-round pressure. With the aid of a novel derivation procedure, the evolution equations governing the scaled amplitudes of the three modes are found to be given by % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaamizamaaCa% aaleqabaGaaGOmaaaakiaadgeadaWgaaWcbaGaaGymaaqabaGccaGG% VaGaamizamaaBaaaleaacqaHepaDdaahaaadbeqaaiaaikdaaaaale% qaaOGaeyypa0JaeyOeI0Iaam4yamaaBaaaleaacaaIWaaabeaakiaa% dgeadaWgaaWcbaGaaGymaaqabaGccqGHsislcaWGJbWaaSbaaSqaai% aaigdaaeqaaOGaaiiFaiaadgeadaWgaaWcbaGaaGymaaqabaGccaGG% 8bWaaWbaaSqabeaacaaIYaaaaOGaeyOeI0IaamyAaiabeo7aNnaaBa% aaleaacaaIXaaabeaakiqadgeagaqeamaaBaaaleaacaaIYaaabeaa% kiqadgeagaqeamaaBaaaleaacaaIZaaabeaaaaa!5308!\[d^2 A_1 /d_{\tau ^2 } = - c_0 A_1 - c_1 |A_1 |^2 - i\gamma _1 \bar A_2 \bar A_3 \], % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaamizaiaadg% eadaWgaaWcbaGaaGOmaaqabaGccaGGVaGaamizaiabes8a0jabg2da% 9iabeo7aNnaaBaaaleaacaaIYaaabeaakiqadgeagaqeamaaBaaale% aacaaIXaaabeaakiqadgeagaqeamaaBaaaleaacaaIZaaabeaaaaa!4324!\[dA_2 /d\tau = \gamma _2 \bar A_1 \bar A_3 \] and % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaamizaiaadg% eadaWgaaWcbaGaaG4maaqabaGccaGGVaGaamizaiabes8a0jabg2da% 9iabeo7aNnaaBaaaleaacaaIZaaabeaakiqadgeagaqeamaaBaaale% aacaaIXaaabeaakiqadgeagaqeamaaBaaaleaacaaIYaaabeaaaaa!4325!\[dA_3 /d\tau = \gamma _3 \bar A_1 \bar A_2 \], where a bar denotes complex conjugation, is a slow time variable and c ₀, c ₁, % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaeq4SdC2aaS% baaSqaaiaaigdaaeqaaaaa!387B!\[\gamma _1 \], % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaeq4SdC2aaS% baaSqaaiaaikdaaeqaaaaa!387C!\[\gamma _2 \], % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaeq4SdC2aaS% baaSqaaiaaiodaaeqaaaaa!387D!\[\gamma _3 \] are real constants. These equations are solved exactly for the special case when A ₂ and A ₃ have constant amplitudes but time-dependent phases. A series of new post-buckling states, which does not exist when the perturbation is monochromatic, are found. We show that two nonneutral modes can interact resonantly to produce a much larger near-neutral mode, and in particular, two O() non-neutral modes may induce a much larger % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaam4taiaacI% cacqaH1oqzdaahaaWcbeqaamaalyaabaGaaGOmaaqaaiaaiodaaaaa% aOGaaiykaaaa!3B87!\[O(\varepsilon ^{{2 \mathord{\left/ {\vphantom {2 3}} \right. \kern-\nulldelimiterspace} 3}} )\] oscillation or static post-buckling state. In this sense, resonant-triad interaction is a powerful mechanism in producing high levels of strain and stress in a pre-stressed elastic plate.     

Shock waves in incompressible elastic solids

Summary The thermodynamic theory of shock waves in incompressible elastic solids is reviewed, and the Hugoniot relation and the propagation condition for the shock speed are derived. Expanding the equations, for weak shock waves, in powers of the shock strength some well-known results of gasdynamics are generalized to the dynamics of shock waves in incompressible elastic media.

---

Zusammenfassung Die thermodynamische Theorie der Stoßwellen in inkompressiblen elastischen Körpern wird zusammenfassend dargestellt, die Hugoniot-Relation und die Ausbreitungsbedingung für die Stoßgeschwindigkeit werden abgeleitet. Durch Reihenentwicklung nach Potenzen der Stoßstärke werden für schwache Stoßwellen einige bekannte Ergebnisse der Gasdynamik für die Dynamik der Stoßwellen in inkompressiblen elastischen Medien verallgemeinert.

---

---

With 2 figures     

Scattering of Rayleigh and Stoneley waves by two adhering elastic wedges

The method of Sommerfeld integrals is used to study propagation of Rayleigh and Stoneley waves in a system of two bonded solid wedges with a common vertex. Numerical results are obtained for configurations with a wide range of angles of steel and aluminum wedges.     

Surface waves in a stretched and sheared incompressible elastic material

In this paper, we analyze the effect of a combined pure homogeneous strain and simple shear in a principal plane of the latter on the propagation of surface waves for an incompressible isotropic elastic half-space whose boundary is normal to the glide planes of the shear. This generalizes previous work in which, separately, pure homogeneous strain and simple shear were considered. For a special class of materials, the secular equation is obtained in explicit form and then specialized to recover results obtained previously for the two cases mentioned above. A method for obtaining the secular equation for a general form of strain–energy function is then outlined. In general, this is very lengthy and the result is not listed, but, for the case in which there is no normal stress on the half-space boundary, the result is given, for illustration, in respect of the so-called generalized Varga material. Numerical results are given to show how the surface wave speed depends on both the underlying pure homogeneous strain and the superimposed simple shear. Further numerical results are provided for the Gent model of limiting chain extensibility.     

Coupled elastic waves in uniform isotropic media

This article deals with a certain type of wave in an infinite elastic medium. In contrast to ordinary longitudinal and transverse waves, the amplitude of the type of wave in question depends sinusoidally on the coordinates of a plane which is transverse to the direction of propagation of the wave, i.e., the wave is actually a packet of travelling and stationary waves. Longitudinal waves of this type are always coupled with transverse waves, while transverse waves of the given type may be coupled with longitudinal waves or another transverse wave or may exist as a single wave in the form of a packet containing a travelling wave and a stationary wave. The coupled waves have two phase velocities, which depend on the mechanical properties of the medium, the frequency of vibration, and the wave numbers of the stationary waves. Coupled surface waves in an elastic medium are more general in character than Rayleigh waves; they exhibit dispersion, and they can be used to explain certain seismological observations made during earthquakes—the complete absence of vertical displacements in some cases and the frequent occurrence of horizontal displacements parallel to the wave front. Allowing for the coupling of elastic waves in a layer leads to a more general characteristic equation than the equation obtained in the Rayleigh-Lamb problem. S. P. Timoshenko Institute of Mechanics, National Academy of Sciences of Ukraine, Kiev. Translated from Prikladnaya Mekhanika, Vol. 35, No. 9, pp. 19–28, September, 1999.     

Purely transverse waves in elastic anisotropic media

Formulas are obtained for decompositions of the third- and fourth-rank tensors symmetric in the last two and three indices, respectively, into irreducible parts invariant relative to the orthogonal group of coordinate transformation. The corresponding parts of the decompositions are orthogonal to each other. These decompositions are used to obtain a general representation of the displacement vectors of plane transverse waves in elastic isotropic and anisotropic solids. It is shown that the displacement vectors of transverse waves are second-, third-, and fourth-degree homogeneous polynomials of the wave normal. Special orthotropic materials are found that transmit purely transverse waves for any direction of the wave normal. The eigenmoduli, eigenstates, and engineering constants (bulk moduli, Youngs moduli, Poissons ratios, shear moduli, and Lame constants of the closest isotropic materials) are determined for these materials.Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 1, pp. 160–172, January–February, 2005     

Explicit expression of polarization vector for surface waves,slip waves,Stoneley waves and interfacial slip waves in anisotropic elastic materials

We present explicit expression of the polarization vector for surface waves and slip waves in an anisotropic elastic half-space, and Stoneley waves and interfacial slip waves in two dissimilar anisotropic elastic half-spaces. An unexpected result is that, in the case of interfacial slip waves, the polarization vector for the material in the half-space _x2≥0$x_2\ge 0$ does not depend explicitly on the material property in the half-space _x2≤0$x_2\le 0$. It depends on the material property in the half-space _x2≤0$x_2\le 0$ implicitly through the interfacial slip wave speed υ$\upsilon$. The same is true for the polarization vector for the material in the half-space _x2≤0$x_2\le 0$.     

Wave propagation in an incompressible transversely isotropic fibre-reinforced elastic media

The boundary conditions at free surface of an incompressible, transversely isotropic elastic half-space are satisfied to obtain the reflection coefficients for the case when outer slowness section is re-entrant. Two quasi-shear waves will be reflected for an angular range of direction of incident wave. The numerical illustrations of reflection coefficients are presented graphically for three arbitrary materials.     

Velocities of elastic waves in consolidated granular media

Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, No. 2, pp. 127–130, March–April, 1992.     

Further criteria for elastic waves in anisotropic media

Two additional criteria for the existence of cusp points on elastic wave surfaces are developed.A previously published method [1] is extended to give a simple necessary and sufficient condition for cusps about (1, 1, 0) axes in cubic and tetragonal media. This criterion is plausibly adapted to provide a simple inequality applicable to any section of slowness surface represented by separable quadratic and quartic equations.Two tables of numerical examples are presented.     

Finite-amplitude Love waves in a pre-stressed compressible elastic half-space with a double surface layer

The dispersive behavior of finite-amplitude time-harmonic Love waves propagating in a pre-stressed compressible elastic half-space overlaid with two compressible elastic surface layers of finite thickness is investigated. The half-space and layers are made of different pre-stressed compressible neo-Hookean materials. The dispersion relation which relates wave speed and wavenumber is obtained in explicit form. Results for the energy density and energy flux of the waves are also presented. The special case where the interfaces between the layers and the half-space are principal planes of the left Cauchy–Green deformation tensor is also investigated. Numerical results are presented showing the variation of the Love wave speed with the pre-stress and the propagation angle.     

On the propagation of elastic waves through composite media

Summary With the aid of an ultrasonic pulse technique, the propagation of elastic waves (longitudinal as well as transverse) through polyurethane rubbers filled with different amounts of sodium chloride particles was studied. The velocity of both longitudinal and transverse waves was found to increase with filler content. From the measured wave velocities, the effective modulus for longitudinal waves,L, bulk modulus,K, and shear modulus,G, were calculated according to the relations for a homogeneous isotropic material. All three moduli appear to be monotonously increasing functions of the filler content over the whole experimentally accessible temperature range (–70 °C to + 70 °C forL andK;}-70 °C to about –20 °C forG) and they, moreover, reflect the glassrubber transition of the binder.Poisson's ratio,, was found to decrease with increasing filler content and show a rise at the high temperature side of the experimentally accessible temperature range (about –20 °C) as a result of the approach of the glass-rubber transition.In addition to the velocities, the attenuation of both longitudinal and transverse waves was measured in the temperature ranges mentioned. It was found that in the hard region tan _L as well as tan _G are independent of the filler content within the accuracy of the measurements. In the rubbery region, however, tan _L, increases with increasing filler content.Finally, the experimental data are compared with a simple macroscopic theory on the elastic properties of composite media.