Hydrothermal synthesis and thermodynamic properties of 2CaO·3B<Subscript>2</Subscript>O<Subscript>3</Subscript>·H<Subscript>2</Subscript>O

2CaO·3B₂O₃·H₂O which has non-linear optical (NLO) property was synthesized under hydrothermal condition and identified by XRD, FTIR and TG as well as by chemical analysis. The molar enthalpy of solution of 2CaO·3B₂O₃·H₂O in HCl·54.572H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HCl·54.501H₂O and of CaO in (HCl+H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of −(5733.7±5.2) kJ mol⁻¹ of 2CaO·3B₂O₃·H₂O was obtained. Thermodynamic properties of this compound were also calculated by a group contribution method.     

Photocatalytic reduction of CO<Subscript>2</Subscript> over TiO<Subscript>2</Subscript> based catalysts

At present, carbon dioxide is considered the largest contributor among greenhouse gases. This review covers the current state of problem of carbon dioxide emissions from industrial and combustion processes, the principle of photocatalysis, existing literature related to photocatalytic CO₂ reduction over TiO₂ based catalysts and the effects of important parameters on the process performance including light wavelength and intensity, type of reductant, metal-modified surface, temperature and pressure. Presented at the 34th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 21–25 May 2007.     

Preparation and characterization of LiFePO<Subscript>4</Subscript> from NH<Subscript>4</Subscript>FePO<Subscript>4</Subscript>·H<Subscript>2</Subscript>O under different microwave heating conditions

Olivine-type LiFePO₄ is a very promising polyanion-type cathode material for lithium-ion batteries. In this work, LiFePO₄ with high specificity capacity is obtained from a novel precursor NH₄FePO₄·H₂O via microwave processing. The grains grow up in the duration of sintering until they reach the decomposition temperature. The apparent conductivity of the samples rises rapidly with the irradiation time and influences the electrochemical performance of the material greatly at high current density. As a result, the LiFePO₄ cathode material obtained with a sintering time of 15 min has good electrochemical performance. Between 2.5 and 4.2 V versus Li, a reversible capacity is as high as 156 mAh g⁻¹ at 0.05 C.     

Effect of PEG with different <Emphasis Type="Italic">M</Emphasis><Subscript>W</Subscript> as template direction reagent on preparation of porous TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> with assistance of supercritical CO<Subscript>2</Subscript>

Titania–silica composite have been prepared using polyethylene glycol (PEG) with different molecular weights (M _w), PEG20000, PEG10000, and PEG2000, as template in supercritical carbon dioxide (SC CO₂). The composite precursors were dissolved in SC CO₂ and impregnated into PEG templates using SC CO₂ as swelling agent and carrier. After removing the template by calcination at suitable temperature, the titania–silica composite were obtained. The composite were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and nitrogen sorption–desorption experiment. Photocatalytic activity of the samples has been investigated by photodegradation of methyl orange. Results indicate that there are many Si–O–Ti linkages in the TiO₂/SiO₂ composite; the PEG template has a significant influence on the structure of TiO₂/SiO₂. In addition, the TiO₂/SiO₂ prepared with PEG10000 exhibited high photocatalytic efficiency. So this work supplies a clue to control and obtain the TiO₂/SiO₂ composite with different photocatalytic reactivity with the aid of suitable PEG template in supercritical CO₂.     

Fast CO<Subscript>2</Subscript> sequestration by aerogel composites

The increasingly evident impact of anthropogenic CO₂ emissions on climate change and associated environmental effects is stimulating the search for viable methods to remove this gas. One of the most promising strategies is the long-term storage of CO₂ in inert, insoluble and thermodynamically-stable materials. This strategy mimics the natural reactions that transform silicates into carbonates regulating the cycle of CO₂ on the surface of the Earth, operating on a geological time-scale. Consequently, the aim is to accelerate these reactions to be applicable on the timescale of human lives. We present the various technologies developed or proposed to date, based on this particular approach. The principal limiting factor is that high pressures and temperatures are required to produce appropriate materials capable of CO₂ sequestration and storage. Nevertheless, the synthetic materials known as aerogels can be modified in shape, size and chemical functionality so as to catalyse the process of CO₂ elimination through silicates (of Ca or Mg), considerably reducing the reaction time and working at atmospheric pressure and temperature.     

Molar heat capacity and thermodynamic properties of crystalline Ho(Asp)Cl<Subscript>2</Subscript>·6H<Subscript>2</Subscript>O

The molar heat capacity, C _p,m, of a complex of holmium chloride coordinated with L-aspartic acid, Ho(Asp)Cl₂·6H₂O, was measured from 80 to 397 K with an automated adiabatic calorimeter. The thermodynamic functions H _T-H _298.15 and S _T-S _298.15 were derived from 80 to 395 K with temperature interval of 5 K. The thermal stability of the complex was investigated by differential scanning calorimeter (DSC) and thermogravimetric (TG) technique, and the mechanism of thermal decomposing of the complex was determined based on the structure and the thermal analysis experiment.     

Investigation of miniature CO<Subscript>2</Subscript> gas sensor based on NASICON

A miniature CO₂ gas sensor based on NASICON (sodium super ionic conductor) thick film was fabricated. The solid-electrolyte NASICON material was synthesized through an inorganic-reagent-based sol-gel method. The resulting materials were characterized by means of X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). NASICON paste was coated on a piece of alumina substrate attached to a platinum heater. Li₂CO₃-BaCO₃ binary carbonate in molar ratio 1 : 1.5 was utilized as the sensing electrode. Within a wide range of CO₂ volume ratio concentration from 500 to 5000 ppm, the output electromotive force (EMF) of the sensor followed Nernst equation well at high working temperature. The response and recovery times were 20 and 58 s, respectively. This miniature CO₂ gas sensor possessed extra merits such as low power consumption, miniaturized framework, and easy fabrication.     

Electronic structure and chemical bonding in K<Subscript>2</Subscript>V<Subscript>3</Subscript>O<Subscript>8</Subscript>

The calculations of the electronic structure of layered polyvanadate K₂V₃O₈ were made employing the spin-polarized tight-binding LMTO method. Calculated magnetic moment for K₄V₆O₁₆ compound phase equals 1.97 μ_B. V-O interactions were established to be dominating in the chemical bonding generation in this polyvanadate according to the estimated crystal orbital overlap population. The covalent bonds V(2)-V(2) in V(2)₂O₇ groups and electron density localization on vanadium atoms in isolated pyramids V(1)O₅ were found.     

Application of thermogravimetric analysis to the evaluation of aminated solid sorbents for CO<Subscript>2</Subscript> capture

In this work a series of solid sorbents were synthesized by immobilizing liquid amines on the surface of a mesoporous alumina. The samples were chemically characterized and BET surface areas calculated from the N₂ adsorption isotherms at 77 K. The CO₂ capture performance of the sorbents and their thermal stability was studied by thermogravimetric methods. The effect of amine loading on the CO₂ capture performance of the prepared sorbents was also evaluated. Analysis of TG-DTG curves showed that thermal stabilization of the amines is significantly improved by immobilizing them on an inorganic support. Temperature-programmed CO₂ adsorption tests from 298 K up to 373 K at atmospheric pressure, proved to be a useful technique for assessing the capacity of sorbents for CO₂ capture. Alumina impregnated with diethylenetriamine presented the highest CO₂ adsorption capacities throughout the tested temperature range.     

Theoretical study on the reaction mechanism of (CH<Subscript>3</Subscript>)<Subscript>3</Subscript>CO<Superscript>.</Superscript> radical with NO

The reaction mechanism of (CH₃)₃CO^. radical with NO is theoretically investigated at the B3LYP/6-31G* level. The results show that the reaction is multi-channel in the single state and triplet state. The potential energy surfaces of reaction paths in the single state are lower than that in the triple state. The balance reaction: (CH₃)₃CONO⇔(CH₃)₃CO^.+NO, whose potential energy surface is the lowest in all the reaction paths, makes the probability of measuring (CH₃)₃CO^. radical increase. So NO may be considered as a stabilizing reagent for the (CH₃)₃CO^. radical.     

X-ray photoelectron study of the interaction of H<Subscript>2</Subscript> and H<Subscript>2</Subscript>+O<Subscript>2</Subscript> mixtures on the Pt/MoO<Subscript>3</Subscript> model catalyst

The effects of H₂ and H₂ + O₂ gas mixtures of varying composition on the state of the surface of the Pt/MoO₃ model catalyst prepared by vacuum deposition of platinum on oxidized molybdenum foil were investigated by X-ray photoelectron spectroscopy (XPS) at room temperature and a pressure of 5–150 Torr. For samples with a large Pt/Mo ratio, the XP spectrum of large platinum particles showed that the effect of hydrogen-containing mixtures on the catalyst was accompanied by the reduction of molybdenum oxide. This effect results from the activation of molecular hydrogen due to the dissociation on platinum particles and subsequent spill-over of hydrogen atoms on the support. The effect was not observed at low platinum contents in the model catalyst (i.e., for small Pt particles). It is assumed for the catalyst that the loss of its hydrogen-activating ability is a consequence of the formation of platinum hydride. Possible participation of platinum hydride as intermediate in hydrogen oxidation to H₂O₂ is discussed.     

Determination of the enthalpy of fusion of K<Subscript>3</Subscript>TaO<Subscript>2</Subscript>F<Subscript>4</Subscript> and KTaF<Subscript>6</Subscript>

Areas of fusion and crystallization peaks of K₃TaO₂F₄ and KTaF₆ were measured using the DSC mode of a high-temperature calorimeter (SETARAM 1800 K). On the basis of these quantities, considering the temperature dependence of the calorimeter sensitivity, values of the fusion enthalpy of K₃TaO₂F₄ at the fusion temperature of 1181 K of (43 ± 4) kJ mol⁻¹ and of KTaF₆ at the fusion temperature of 760 K of (8 ± 1) kJ mol⁻¹ were determined.     

Facilitated Transport of C<Subscript>2</Subscript>H<Subscript>4</Subscript> in a SiO<Subscript>2</Subscript>-poly(N-vinylpyrrolidone)-Ag<Superscript>+</Superscript> Inorganic-Organic Hybrid Membrane

Inorganic-organic hybrid membranes containing silica as the structure matrix, poly(N-vinylpyrrolidone) (PVP) as the organic mediating agent and silver ions as olefinic carriers were prepared using sol–gel method and dip-coating process. The structure and permeances of the membranes for N₂, He, C₂H₄, C₂H₆ at different temperatures indicated that defect-free membranes were obtained and the transportation of the C₂H₄ through the membranes followed the dissolution and diffusion mechanism. Ideal separation factors of C₂H₄/C₂H₆ through the membranes were evaluated at the temperature of 298, 373 and 423 K respectively using mixture gas of 50% C₂H₄-50% C₂H₆. The results showed that the ideal separation factors of C₂H₄/C₂H₆ through the membranes were obviously greater than the ratio of PC₂H₄/PC₂H₆ obtained from the single gas measurement due to the hindering effect by the adsorbed C₂H₄. The ideal separation factors of C₂H₄/C₂H₆ increased with temperature and reached 10 at 423 K, which suggested that C₂H₄ and C₂H₆ could be separated at lower humidity compared to the reported organic polymer/silver salt membranes in which humidified gases and higher silver loading were usually used. The transport of C₂H₄ in the inorganic-organic hybrid membrane was proposed to follow the hopping mechanism, that is, olefins moved across the fixed silver sites.     

Osmotic Coefficients of the Li<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript>+LiCl + H<Subscript>2</Subscript>O System at <Emphasis Type="Italic">T</Emphasis>=273.15 K

Osmotic coefficients and water activities for the Li₂B₄O₇+LiCl+H₂O system have been measured at T=273.15 K by the isopiestic method, using an improved apparatus. Two types of osmotic coefficients, φ _S and φ _E, were determined. φ _S is based on the stoichiometric molalities of the solute Li₂B₄O₇(aq), and φ _E is based on equilibrium molalities from consideration of the equilibrium speciation into H₃BO₃,B(OH)₄⁻ and B₃O₃(OH)₄⁻. The stoichiometric equilibrium constants K _m for the aqueous speciation reactions were estimated. Two types of representations of the osmotic coefficients for the Li₂B₄O₇+LiCl+H₂O system are presented with ion-interaction models based on Pitzer’s equations with minor modifications: model (I) represents the φ _S data with six parameters based on considering the ion-interactions between three ionic species of Li⁺, Cl⁻, and B₄O₇²⁻, and model (II) for represents the φ _E data based on considering the equilibrium speciation. The parameters of models (I) and (II) are presented. The standard deviations for the two models are 0.0152 and 0.0298, respectively. Model (I) was more satisfactory than model (II) for representing the isopiestic data.     

Searching blue-shifted O–H···Y hydrogen bond in CH<Subscript>3</Subscript>OH complexes with CF<Subscript>4</Subscript>, C<Subscript>2</Subscript>F<Subscript>2</Subscript>, OC,Ne, and He: a theoretical study

The hydrogen-bonded structures of the CH₃OH complexes with CF₄, C₂F₂, OC, Ne, and He are designated as the starting points for geometry optimizations without and with counterpoise (CP) correction at MP2 level of theory with the basis sets 6-31+G*, 6-31++G**, and 6-311++G**, respectively. Tight convergence criteria are applied throughout all geometry optimizations in order to reduce the computational errors. According to the optimizations without CP correction, a blue-shifted O–H···Y (where Y = F, O, Ne, or He) hydrogen bond exists in all these five complexes. The magnitudes of blue shifts of ν(O–H) of the former four complexes with respect to that of CH₃OH are reduced greatly when the polarization and diffuse functions of the hydrogen atoms are added (results from 6-31+G* versus those from 6-31++G**). However, for the complexes CH₃OH–CF₄ and CH₃OH–C₂F₂, our optimizations using the CP corrections did not find the hydrogen-bonded structure to be a stationary point. The energy minimum of both the complexes corresponds to a non-hydrogen-bonded structure.     

High temperature adsorption of CO<Subscript>2</Subscript> on various hydrotalcite-like compounds

A study was conducted to describe and quantify how substitution of the divalent cation and interlayer charge compensating anions affect the CO₂ adsorptive capacity of various hydrotalcite-like compounds (HTlcs). Physical and chemical properties of the HTlcs were evaluated using a number of methods and the CO₂ adsorption rate and capacity were measured at elevated temperature (603 K). The results showed that the synthetic analogue of the naturally occurring hydrotalcite mineral, [Mg_0.73Al_0.27(OH)₂](CO₃)_0.13⋅xH₂O, had the best overall adsorption capacity and kinetics. The stability of the adsorption capacity was tested by subjecting the model HTlc to 10 equilibrium adsorption and desorption cycles. At the end of the cycle, the HTlc had maintained approximately sixty-five percent of its initial capacity. Temperature programmed desorption of CO₂ was used to quantify the surface basicity of the various HTlcs. The results showed that the reversible physisorption portion of the CO₂ isotherm was correlated to the number of surface basic sites on the HTlcs.     

Effect of sodium cation on the electrochemical reduction of CO<Subscript>2</Subscript> at a copper electrode in methanol

The electrochemical reduction of CO₂ with a Cu electrode in methanol was investigated with sodium hydroxide supporting salt. A divided H-type cell was employed; the supporting electrolytes were 80 mmol dm⁻³ sodium hydroxide in methanol (catholyte) and 300 mmol dm⁻³ potassium hydroxide in methanol (anolyte). The main products from CO₂ were methane, ethylene, carbon monoxide, and formic acid. The maximum current efficiency for hydrocarbons (methane and ethylene) was 80.6%, at −4.0 V vs Ag/AgCl, saturated KCl. The ratio of current efficiency for methane/ethylene, r _f(CH₄)/r _f(C₂H₄), was similar to those obtained in LiOH/methanol-based electrolyte and larger relative to those in methanol using KOH, RbOH, and CsOH supporting salts. In NaOH/methanol-based electrolyte, the efficiency of hydrogen formation, a competing reaction of CO₂ reduction, was suppressed to below 4%. The electrochemical CO₂ reduction to methane may be able to proceed efficiently in a hydrophilic environment near the electrode surface provided by sodium cation.     

Quantum-chemical modelling of nanotubes of titanium silicocarbides Ti<Subscript>2</Subscript>SiC,Ti<Subscript>3</Subscript>SiC<Subscript>2</Subscript>, and Ti<Subscript>4</Subscript>SiC<Subscript>3</Subscript>

Atomic models are proposed for nanotubes of the titanium silicocarbides Ti₂SiC, Ti₃SiC₂, and Ti₄SiC₃, and their electronic structure and interatomic interactions are investigated by the density functional tight-binding method (DFTB) in comparison with the corresponding crystalline phases. Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 45, No. 2, pp. 88-92, March-April, 2009.     

Thermal oxide synthesis and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanorods and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanowires

Fe₃O₄ nanorods and Fe₂O₃ nanowires have been synthesized through a simple thermal oxide reaction of Fe with C₂H₂O₄ solution at 200–600°C for 1 h in the air. The morphology and structure of Fe₃O₄ nanorods and Fe₂O₃ nanowires were detected with powder X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The influence of temperature on the morphology development was experimentally investigated. The results show that the polycrystals Fe₃O₄ nanorods with cubic structure and the average diameter of 0.5–0.8 μm grow after reaction at 200–500°C for 1 h in the air. When the temperature was 600°C, the samples completely became Fe₂O₃ nanowires with hexagonal structure. It was found that C₂H₂O₄ molecules had a significant effect on the formation of Fe₃O₄ nanorods. A possible mechanism was also proposed to account for the growth of these Fe₃O₄ nanorods. Supported by the Fund of Weinan Teacher’s University (Grant No. 08YKZ008), the National Natural Science Foundation of China (Grant No. 20573072) and the Doctoral Fund of Ministry of Education of China (Grant No. 20060718010)     

Modeling the active centers of V<Subscript>2</Subscript>O<Subscript>5</Subscript>/SiO<Subscript>2</Subscript> and V<Subscript>2</Subscript>O<Subscript>5</Subscript>/TiO<Subscript>2</Subscript> supported catalysts. DFT theoretical analysis of optical properties

Within the framework of the density functional theory (DFT), the electronic structure of monooxodioxovanadium functional groups in tetrahedral coordination, which model the active centers (ACs) of fine supported catalysts V₂O₅/SiO₂ and V₂O₅/TiO₂, has been analyzed. The optimal structures of three ACs as possible models of monomeric and polymeric oxovanadium forms on the carriers with low vanadium content were determined. The modified DFT method involving the time dependence of Kohn-Sham equation (TDDFT) was used for the adopted AC models to calculate the energies of the excited states, and optical spectra of the absorption in 25000–60000 cm^?1 region were reconstructed on their base. The spectrum in this region is due to O → V charge transfer. The features of electronic spectra with the charge transfer for V₂O₅/SiO₂ and V₂O₅/TiO₂ catalysts and the vibrational spectra of three AC models corresponding to the monomeric and dimeric oxovanadium forms of the supported catalysts V₂O₅/SiO₂ and V₂O₅/TiO₂ were defined. The detailed interpretation of normal vibration frequencies is given. The frequencies typical of the monomeric and dimeric oxovanadium forms on the carrier surface were identified.