Epitaxial growth of ZnO thin films on Si substrates by PLD technique

Epitaxial ZnO thin films have been grown on Si(1 1 1) substrates at temperatures between 550 and 700 °C with an oxygen pressure of 60 Pa by pulsed laser deposition (PLD). A ZnO thin film deposited at 500 °C in no-oxygen ambient was used as a buffer layer for the ZnO growth. In situ reflection high-energy electron diffraction (RHEED) observations show that ZnO thin films directly deposited on Si are of a polycrystalline structure, and the crystallinity is deteriorated with an increase of substrate temperature as reflected by the evolution of RHEED patterns from the mixture of spots and rings to single rings. In contrast, the ZnO films grown on a homo-buffer layer exhibit aligned spotty patterns indicating an epitaxial growth. Among the ZnO thin films with a buffer layer, the film grown at 650 °C shows the best structural quality and the strongest ultraviolet (UV) emission with a full-width at half-maximum (FWHM) of 86 meV. It is found that the ZnO film with a buffer layer has better crystallinity than the film without the buffer layer at the same substrate temperature, while the film without the buffer layer shows a more intense UV emission. Possible reasons and preventive methods are suggested to obtain highly optical quality films.     

High intense UV-luminescence of nanocrystalline ZnO thin films prepared by thermal oxidation of ZnS thin films

High quality zinc oxide (ZnO) films were obtained by thermal oxidation of high quality ZnS films. The ZnS films were deposited on a Si substrate by a low-pressure metalorganic chemical vapor deposition technique. X-ray diffraction spectra indicate that high quality ZnO films possessing a polycrystalline hexagonal wurtzite structure with preferred orientation of (0 0 2) were obtained. A fourth order LO Raman scattering was observed in the films. In photoluminescence (PL) measurements, a strong PL with a full-width at half-maximum of 10 nm around 380 nm was obtained for the samples annealed at 900°C at room temperature. The maximum PL intensity ratio of the UV emission to the deep-level emission is 28 at room temperature, providing evidence of the high quality of the nanocrystalline ZnO films.     

Decisive role of Au layer on the oriented growth of ZnO nanorod arrays via a simple aqueous solution method

Vertically aligned arrays of ZnO nanorod were synthesized on the Au/SiO₂/Si(1 0 0) substrate by a simple aqueous solution growth process, without pre-prepared ZnO seed layer. For comparison, glass and SiO₂/Si were also used as substrates, and the results show that the Au layer plays a decisive role in orienting the growth of the ZnO nanorod. The effects of other growth parameters, including Zn²⁺ concentration and growth time, on morphology, density, and orientation of the ZnO nanostructure were also studied and with longer reaction time, a new structure namely ZnO nanotip was obtained. Moreover, the growth mechanism of ZnO nanorod arrays grown on the Au/SiO₂/Si substrate was proposed.     

Deep ultraviolet emission of ZnO films prepared by RF magnetron sputtering at changing substrate temperature

ZnO films with deep ultraviolet emission on (0 0 0 6) sapphire substrates were prepared by RF magnetron sputtering at periodically changing substrate temperature. It is found that the as-prepared ZnO films consist of the obvious multilayered structures from the SEM images of their cross-sections. Room temperature photoluminescence of ZnO films with multilayered structure shows two emissions centered at 332 and 388 nm with 260 nm excited wavelength. The strong deep ultraviolet emission at 332 nm is due to the O 2p dangling-bond state in the multilayered structure of ZnO films. Raman scattering spectrum of sample shows that such structured ZnO film possesses strong compressive stress.     

Structure evolution of Zn cluster on Si (0 0 1) substrate for ZnO nanostructure growth

In this paper, Monte Carlo simulations are carried out for Zn cluster supported on a static Si (0 0 1) substrate to estimate the morphological evolution of self-catalysis growth of ZnO nanostructures. The tight-binding many-body potential and the Lennard–Jones potential are used to describe Zn–Zn and Zn–Si interactions, respectively. The dynamic processes of Zn cluster in the temperature field decomposing and wetting effects are visualized through the simulation. The Zn atomic aggregates that randomly disperse on the Si (0 0 1) substrate with different shapes, such as a dimer, trimer, multimer and atomic chain, would act as catalytic nucleation sites for the following growth of the ZnO nanostructure. This phenomenon provides a sound explanation for the formation of randomly orientated and diversified ZnO nanostructures on the Si (0 0 1) substrate.     

High-quality ZnO thin films prepared by two-step thermal oxidation of the metallic Zn

In this paper, we report the preparation of nanocrystalline ZnO thin films on Si (1 0 0) substrates using a simple method, in which a resistive thermal evaporation of Zn and a two-step annealing process were employed. The aim of the first annealing step in an oxygen ambient at 300°C for 2 h is to form ZnO layers on the surface of the Zn films to prevent the diffusion of the metallic Zn from the films during the high-temperature annealing process. To obtain high-quality ZnO films, a high-temperature annealing step was performed at temperature in the range of 600–900°C. The effects of the annealing temperature on the photoluminescence (PL) and orientation of ZnO nanocrystalline thin films were studied. A very strong near-band-edge emission around 375 nm with a full-width at half-maximum of 105 meV and a relatively weak emission around 510 nm related to deep-level defects were observed, which indicated that high-quality ZnO films have been obtained.     

Growth of nitrogen-doped p-type ZnO films by spray pyrolysis and their electrical and optical properties

Nitrogen-doped ZnO films were deposited on silicon (1 0 0) substrate using zinc acetate and ammonium acetate aqueous solution as precursors by ultrasonic spray pyrolysis. Successful p-type doping can be realized at optimized substrate temperature. The p-type ZnO films show excellent electrical properties such as hole concentration of 10¹⁸ cm⁻³, hole mobility of 10² cm² V⁻¹ s⁻¹ and resistivity of 10⁻² Ω cm. In the photoluminescence measurement, a strong near-band-edge emission was observed, while the deep-level emission was almost undetectable in both undoped and N-doped ZnO films. The growth and doping mechanism of N-doped ZnO films were discussed.     

Nanocrystalline Pr-doped ZnO insulator for metal–insulator–Si Schottky diodes

Pr-doped ZnO (ZnO:Pr) insulating thin films were prepared on glass and Si substrates by oxidation in air. The films were characterised by X-ray diffraction (XRD), energy dispersion X-ray fluorescence (EDXRF), and optical absorption spectroscopy. The molar ratio Pr/Zn of the samples was determined by the EDXRF method. The XRD study shows the formation of nanocrystalline (26–50 nm) nc-Pr-doped ZnO. The optical and electrical conduction were explained by a slight change of stoichiometric composition. The nc-ZnO:Pr/Si heterojunctions are being Schottky barrier diodes (SBDs) and exhibited high rectification behaviour. The parameters describe the current pass through those SBDs were determined according to the available models.     

Growth of epitaxial ZnO films on Si (1 1 1) substrates with Cr compound buffer layer by plasma-assisted molecular beam epitaxy

Single crystalline ZnO film was grown on (1 1 1) Si substrate through employing an oxidized CrN buffer layer by plasma-assisted molecular beam epitaxy. Single crystalline characteristics were confirmed from in-situ reflection high energy electron diffraction, X-ray pole figure measurement, and transmission electron diffraction pattern, consistently. Epitaxial relationship between ZnO film and Si substrate is determined to be (0 0 0 1)_ZnO‖(1 1 1)_Si and [1 1 2¯ 0]_ZnO‖[0 1 1]_Si. Full-width at half-maximums (FWHMs) of (0 0 0 2) and (1 0 1¯ 1) X-ray rocking curves (XRCs) were 1.379° and 3.634°, respectively, which were significantly smaller than the FWHMs (4.532° and 32.8°, respectively) of the ZnO film grown directly on Si (1 1 1) substrate without any buffer. Total dislocation density in the top region of film was estimated to be ∼5×10⁹ cm⁻². Most of dislocations have a screw type component, which is different from the general cases of ZnO films with the major threading dislocations with an edge component.     

The photoluminescence of ZnO thin films grown on Si (1 0 0) substrate by plasma-enhanced chemical vapor deposition

High-quality ZnO thin films have been grown on a Si(1 0 0) substrate by plasma-enhanced chemical vapor deposition (PECVD) using a zinc organic source (Zn(C₂H₅)₂) and carbon dioxide (CO₂) gas mixtures at a temperature of 180°C. A strong free exciton emission with a weak defect-band emission in the visible region is observed. The characteristics of photoluminescence (PL) of ZnO, as well as the exciton absorption peak in the absorption spectra, are closely related to the gas flow rate ratio of Zn(C₂H₅)₂ to CO₂. Full-widths at half-maximum of the free exciton emission as narrow as 93.4 meV have been achieved. Based on the temperature dependence of the PL spectra from 83 to 383 K, the exciton binding energy and the transition energy of free excitons at 0 K were estimated to be 59.4 meV and 3.36 eV, respectively.     

Structural,optical and electrical properties of Ga-doped and (Ga,Co)-codoped ZnO films

The Ga-doped and (Ga, Co)-codoped ZnO films were grown on quartz glass substrate by inductively coupled plasma enhanced physical vapor deposition. The effect of Co doping and oxygen pressure on the structural, optical, electrical and magnetic properties of the as-grown films was investigated. The structural characterization revealed that high-quality films were grown with wurtzite structure and c-axis preferred crystalline orientation. The surface morphology was affected by Co doping and oxygen pressure. Room-temperature ferromagnetism was observed in (Ga, Co)-codoped ZnO films. We found that the optical and electrical properties were degraded with Co doping. The Ga-doped ZnO films had an average transmittance of above 88% in the visible wavelength, while (Ga, Co)-codoped ZnO showed a lower average transmittance (∼65%) due to the d-d transitions of Co²⁺. The resistivity and Hall mobility of (Ga, Co)-doped ZnO samples were lower than those of Ga-doped ZnO films when grown at the same oxygen pressure.     

Enhancement of near-band edge photoluminescence of ZnO thin films by employing MgF2 buffer layer

ZnO/MgF₂/ZnO sandwich structure films were fabricated. The effects of a buffer layer on structure and optical properties of ZnO films were investigated by X-ray diffraction, photoluminescence, optical transmittance and absorption measurements. Measurement results showed that the buffer layer had the effects of improving the quality of ZnO films and releasing the residual stresses in the films. The near-band edge emissions of ZnO films deposited on the MgF₂ buffer layer were significantly enhanced compared with those deposited on bare substrate due to the smaller lattice mismatch between MgF₂ and ZnO than that between fused silica and ZnO.     

Effect of oxygen partial pressure on the growth of zinc micro and nanostructures

Zinc micro and nanostructures were synthesized in vacuum by condensing evaporated zinc on Si substrate at different gas pressures. The morphology of the grown Zn structures was found to be dependent on the oxygen partial pressure. Depending on oxygen partial pressure it varied from two-dimensional microdisks to one-dimensional nanowire. The morphology and structural properties of the grown micro and nanostructures were studied by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Transmission electron microscopy (TEM) studies on the grown Zn nanowires have shown that they exhibit core/shell-like structures, where a thin ZnO layer forms the shell. A possible growth mechanism behind the formation of different micro and nanostructures has been proposed. In addition, we have synthesized ZnO nanocanal-like structures by annealing Zn nanowires in vacuum at 350 °C for 30 min.     

Microstructural characteristics and crystallographic evolutions of Ga-doped ZnO films grown on sapphire substrates at high temperatures by RF magnetron sputtering

The microstructural characteristics and crystallographic evolutions of Ga-doped ZnO (GZO) films grown at high temperatures were examined by X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM). The GZO films with various film thicknesses were grown on (0 0 0 1) Al₂O₃ substrates at 750 °C by RF magnetron sputtering using a 2 wt% Ga-doped ZnO single target. The (0 0 0 2) ZnO peaks in the XRD patterns shifted to a higher angle with increasing film thickness and an additional (1 0 1¯ 1) ZnO peak was observed in the final stage of film growth. HRTEM showed the epitaxial growth of GZO films in the initial growth stage and the formation of surface protrusions in the intermediate stage due to elastic relaxation. The surface protrusions consisted of {1 0 1¯ 1}, {1 0 1¯ 3}, and {0 0 0 2} planes. After the surface protrusions had formed, a GZO film with many c-axis tilted grains formed due to plastic relaxation, where the tilted grain boundaries had an angle of 62° to the substrate. The formation of the protrusions and c-axis tilted grains was closely related to the strain status of the film induced by Ga incorporation, high-temperature growth and a high film thickness.     

Effects of growth temperature on the properties of ZnO/GaAs prepared by metalorganic chemical vapor deposition

A series of ZnO films were grown on GaAs(0 0 1) substrates at different growth temperatures in the range 250–720°C by metalorganic chemical vapor depostion. Field emission scanning electron microscopy was utilized to investigate the surface morphology of ZnO films. The crystallinity of ZnO films was investigated by the double-crystal X-ray diffractometry. The optical and electrical properties of ZnO films were also investigated using room-temperature photoluminescence and Hall measurements. Arrhenius plots of the growth rate versus reciprocal temperature revealed the kinetically limited growth behavior depending on the growth temperature. It was found that the surface morphology, structural, optical and electrical properties of the films were improved with increasing growth temperature to 650°C. All the properties of the film grown at 720°C were degraded due to the decomposition of ZnO film.     

衬底温度对磁控溅射法制备掺Ta氧化锌薄膜性能的影响

采用射频磁控溅射法,在不同的衬底温度下制备了钽(Ta)掺杂的氧化锌(ZnO)薄膜,采用X射线能谱(EDS)、X射线衍射(XRD)、扫描电镜(SEM)、紫外-可见分光光度计和光致发光(PL)光谱研究了衬底温度对制备的Ta掺杂ZnO薄膜的组分、微观结构、形貌和光学特性的影响.EDS的检测结果表明,Ta元素成功掺入到了ZnO薄膜;XRD图谱表明,掺入的Ta杂质是替代式杂质,没有破坏ZnO的六方晶格结构,随着衬底温度的升高,(002)衍射峰的强度先增大后降低,在400℃时达到最大;SEM测试表明当衬底温度较高时(400℃和500℃),Ta掺杂ZnO薄膜的晶粒明显变大;紫外-可见透过光谱显示,在可见光范围,Ta掺杂ZnO薄膜的平均透光率均高于80;,衬底不加热时制备的Ta掺杂ZnO的透光率最高;制备的Ta掺杂ZnO薄膜的禁带宽度范围为3.34~3.37eV,衬底温度为500℃时制备的Ta掺杂ZnO薄膜的禁带宽度最小,为3.34eV.PL光谱表明衬底温度为500℃时制备的Ta掺杂ZnO薄膜中缺陷较多,这也是造成薄膜禁带宽度变小的原因.     

Structural characterization of CdTe layers grown on (0 0 0 1) sapphire by MOCVD

Crystalline ZnO nanoparticles were synthesized on Si substrates with or without a Au catalyst by a chemical vapor deposition (CVD) method using ZnS as the source material. The average sizes are in the range of 40–200 nm and the densities of 10⁴–10¹⁰ cm⁻². In the absence of an Au catalyst, the average nanoparticle size firstly decreases and then increases with increasing substrate temperature while the nanoparticle density decreases as the substrate temperature increases. In the presence of an Au catalyst, ZnO nanoparticles only grow when the substrate temperature is higher than 300°C and the higher the substrate temperature the denser the nanoparticles are deposited. The density of the ZnO nanoparticles grown on a Si (1 1 1) substrate is higher than that on a Si (1 0 0) substrate with or without Au catalyst.     

Structural and electrical characterizations of single tetragonal FeSe on Si substrate

(0 0 l)-Oriented FeSe thin films were successfully fabricated by metal organic chemical vapor deposition on Si substrate with large thermal mismatch. X-ray diffraction and X-ray photoelectron spectroscopy measurements indicate that the films are of single tetragonal phase FeSe. Hysteresis loop indicates that the FeSe structure is ferromagnetic at room temperature with coercive force of 260 Oe. The FeSe films show p-type conduction with carrier concentration of 10²¹ cm⁻³, and the anomalous Hall effect was discussed.     

Thickness and substrate orientation dependence of ferromagnetism in Mn doped ZnO thin films

The effect of film thickness and substrate orientation on ferromagnetism in Mn doped ZnO thin films have been studied. The Mn doped ZnO films of different thickness (15, 35 and 105 nm) have been grown on both Si (100) and Si (111) substrates. The structural, electrical, optical, elemental and magnetic properties of the films have been investigated by X‐ray diffraction (XRD), Hall Effect measurements, photoluminescence (PL), energy dispersive spectroscopy (EDS) and vibrating sample magnetometer (VSM), respectively. It is found that all the properties are strongly influenced by the film thickness and substrate orientation. The XRD analysis confirmed that the formation of high quality monophasic hexagonal wurtzite structure for all the grown films. The room temperature VSM measurements showed that the films of lower thickness have better ferromagnetism than that of the thicker films grown on both the substrates. Among the lower thickness films, the film grown on Si (111) substrate has higher saturation magnetization (291×10^‐5 emu cm^‐3) due to high density of the defects. The observed ferromagnetism has been well justified by XRD, Hall measurements and PL. The presence of Mn atoms in the film has been confirmed by EDS. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

MOCVD方法在Ti/Si(111)模板上生长ZnO薄膜的研究

本文采用常压MOCVD方法在Ti/Si（111）模板上生长了氧化锌（ZnO）薄膜，使用二乙基锌为Zn源，去离子水为O源。Si衬底上的Ti薄层采用电子束蒸发台蒸发，然后低温生长缓冲层并在高温下进行重结晶，接着在680％进行ZnO薄膜的生长。采用粉末衍射法、双晶X射线衍射及光致发光技术研究了材料的取向、结晶性能及发光性能。结果表明，本文制备了高度择优取向和良好发光性能的ZnO薄膜。