Cobalt electrodeposition onto polycrystalline gold from ammoniacal solutions

In the present work, the cobalt electrodeposition onto polycrystalline gold electrodes from aqueous solutions containing 0.01M CoSO₄ + 1 M (NH₄)₂SO₄ at pH=7 was analyzed. Linear voltammetry results suggested a change in the kinetic of the cobalt electrodeposition. In all cases, the nucleation rate (A), the number of active nucleation sites (N ₀) and the saturation number of nuclei (N _s ) values were potential dependent. The calculated Gibbs free energy (ΔG) for this system was 1.88×10^?20 J nuclei^?1 and the transfer coefficient for the Hydrogen Electroreduction Reaction (HER) was 0.47.      

Synthesis of lanthanide(III) complexes appended with a diphenylphosphinamide and their interaction with human serum albumin

Two DOTA-based proligands bearing a pendant diphenylphosphinamide 4a and 4b were synthesised. Their Eu(III) complexes exhibit sensitised emission when excited at 270 nm via the diphenylphosphinamide chromophore. Hydration states of q = 1.5 were determined from excited state lifetime measurements (Eu.4a $ k_{{{\text{H}}_{ 2} {\text{O}}}} = 2. 1 4 \,{\text{ms}}^{ - 1} ,\;k_{{{\text{D}}_{ 2} {\text{O}}}} = 0. 6 4 \,{\text{ms}}^{ - 1} $ ; Eu.4b $ k_{{{\text{H}}_{ 2} {\text{O}}}} = 2. 6 7\, {\text{ms}}^{ - 1} ,\;k_{{{\text{D}}_{ 2} {\text{O}}}} = 1. 1 8 \,{\text{ms}}^{ - 1} $ ). In the presence of human serum albumin (HSA) (0.1 mM Eu.4a/b, 0.67 mM HSA, pH 7.4) q = 0.4 for Eu.4a ( $ k_{{{\text{H}}_{ 2} {\text{O}}}} = 1. 3 4\, {\text{ms}}^{ - 1} ,\;k_{{{\text{D}}_{ 2} {\text{O}}}} = 0. 7 5\, {\text{ms}}^{ - 1} $ ) and q = 0.6 for Eu.4b ( $ k_{{{\text{H}}_{ 2} {\text{O}}}} = 1. 8 3\, {\text{ms}}^{ - 1} ,\;k_{{{\text{D}}_{ 2} {\text{O}}}} = 1.0 5 \,{\text{ms}}^{ - 1} $ ). Relaxivites (pH 7.4, 298 K, 20 MHz) of the Gd(III) complexes in the absence and presence of HSA (0.1 mM Gd.4a/b, 0.67 mM HSA) were: Gd.4a (r ₁ = 7.6 mM^?1s^?1 and r ₁ = 11.7 mM^?1s^?1) and Gd.4b. (r ₁ = 7.3 mM^?1s^?1 and r ₁ = 16.0 mM^?1s^?1). These relatively modest increases in r ₁ are consistent with the change in inner-sphere hydration on binding to HSA shown by luminescence measurements on Eu.4a/b. Binding constants for HSA determined by the quenching of luminescence (Eu) and enhancement of relaxivity (Gd) were Eu.4a (27,000 M^?1 ± 12%), Eu.4b (32,000 M^?1 ± 14%), Gd.4a (21,000 M^?1 ± 15%) and Gd.4b (26,000 M^?1 ± 15%).     

Separation of trace amounts palladium by SiO2/TiO2/Ce nanoparticles prior to flame atomic absorption spectrometry determination in anodic slime and wastewater samples

In the present work, a new SiO₂/TiO₂/Ce, nanoparticle was synthesed using sol-gel method and evaluated as an adsorbent for preconcentration trace amounts of Pd(II) ions. The characterization of the nanoparticles has been studied by transmission electron microscope and X-ray diffraction. The preconcentration method is based on palladium adsorption onto the surface of nanoparticle at pH 8.5. The main factors affecting Pd(II) adsorption, such as pH of sample solution, concentration and volume of eluent, sample volume, interfering of the coexisting ions and flow rate of sample and eluent were investigated and optimized. At optimum conditions, linearity was maintained between 4.0 to 1000.0 ng mL^?1. Detection limit based on 3S_b/m was 2.3 ng mL^?1. Seven replicate determinations of a solution containing of 12.5 µg palladium gave a relative standard deviation ±1.7%. According to the Langmuir linear model, the maximum adsorption capacity of palladium was found to be 34.5 mg g^?1. Finally, the feasibility of the proposed method for Pd(II) determination was assessed by analysis of certified reference materials, anodic slime and wastewater samples and satisfactory results were obtained.      

Stability prediction of Cu2+, Ni2+ and Zn2+ N-salicylidene-aminoacidato complexes by models based on connectivity index 3 χ v

This paper presents models for the estimation of stability constants (K ₁ and β ₂) of nickel(II), copper(II) and zinc(II) mono- and bis-complexes with 5 Schiff bases (salicylideneglycine, salicylidenealanine, salicylideneserine, salicylidenephenylalanine, and salicylidenetyrosine). The models were based on the molecular-graph theory and valence molecular connectivity index of the 3^rd order, ³χ ^v , derived from it. Univariate linear models were developed for each metal separately, while in the common models for two and three metals, the indicator variable, In, was introduced. The standard error of models for the log K ₁ constant was less than 0.12, while for log β ₂ models, the S.E. did not exceed 0.14.      

A TLC Study of the lipophilicity of thirty-two acetylcholinesterase inhibitors — 1,2,3,4-tetrahydroacridine and 2,3-dihydro-1H-cyclopenta[b]quinoline derivatives

The lipophilicity of thirty-two novel acetylcholinesterase (AChE) inhibitors — 1,2,3,4-tetrahydroacridine and 2,3-dihydro-1H-cyclopenta[b]quinoline derivatives was studied by thin layer chromatography. The analyzed compounds were chromatographed on RP-18, RP-8, RP-2, CN and NH₂ stationary phases with dioxane — citric buffer pH 3.0 binary mobile phases containing different proportions of dioxane. R_M values for pure water were extrapolated from the linear Soczewiński-Wachtmeister equation and six compounds with known literature log P values were used as reference calibration data set for computation of experimental log P values. The obtained results were compared with computationally calculated partition coefficients values (AlogPs, AClogP, AlogP, MlogP, KOWWIN, XlogP2, XlogP3) by PCA and significant differences between them were observed.     

Spectrophotometric study of competitive complexation equilibria involving overlapped spectral responding species: Determination of the stability constant of bismuth-pyrophosphate complex

Spectrophotometric study of competitive complex formation equilibria involving overlapped spectral responding species applying a simple and versatile algorithm was carried out. The algorithm involves multivariable regression for calculation of equilibrium concentrations from multiwavelength data and mass action law for the stability constant calculation. The used regression functions are part of common statistical software. Stability constants and complex stoichiometry of competing equilibria were simultaneously determined. The species concentration profiles at several spectral overlapping and ??-coefficient of competing reaction were obtained. Non-absorbing bismuth ?? pyrophosphate (PPh) system was studied as a competitive reaction of bismuth ?? 4-(2-Pyridylazo) resorcinol (PAR) complex. The formation of Bi-PPh complex with 1:1 stoichiometry was proved in the studied concentration region (C_Bi = 1×10^?5 mol L^?1; C_PPh = 5×10^?6 ? 1×10^?4 mol L^?1). The stability constant of the complex at pH 1 and ?? = 1.0 have been determined: log?? = 4.2±0.2.      

Tuning the textural and surface properties of carbon xerogels to be used as supports for gold catalysts

Carbon xerogels (CXs) synthesized from resorcinol and formaldehyde under different pH conditions were investigated. Both the textural and surface properties of the CXs depend closely on the pH used in the synthesis procedure. Concerning the texture, the mesoporous surface area (S_meso) increases and the micropore volume (V_micro) decreases as the pH increases; concerning the surface chemistry, surface oxygen functional groups were easier to be created (by O₂) on CX synthesized at lower pH. Application of these CXs as support of gold catalysts was also studied. Results showed that the oxygen activated CX that was synthesized at moderate pH (i.e., pH 6.0) was the most favorable support for gold catalysts used in selective oxidation of benzyl alcohol by molecular oxygen in liquid phase, due to the adequate amounts of surface oxygen functional groups created on the surface.      

Stereoselective preparation of mono- and bis-derivatives of pentacyclo[6.3.0.02,6.03,10.05,9] undecane (D 3-trishomocubane)

The rearrangement of easily accessible Cookson’s diketone with chlorosulfonic acid in chloroform followed by the acidic hydrolysis gave 6-chloro-7-hydroxy-dichloropentacyclo[6.3.0.0^2,6.0^3,10.0^5,9]undecane-4-one, whose syn-stereochemistry was assigned through the X-ray crystal structure analysis. This key structure was used for the stereoselective synthesis of the D ₃-trishomocubane derivatives as well as for the preparation of potential drugs bearing hydroxy- and amino-functional groups. A new multigram preparative synthesis of D ₃-trishomocubane was developed.      

Effects of dissolved metal chlorides on the behavior of silica nanoparticles in aqueous media

Effects of chlorides of univalent (LiCl, NaCl, KCl), bivalent (MgCl₂, BaCl₂) and trivalent (AlCl₃) metals at different concentration (0.001–0.1 M) on the behavior of nanosilica A-200 (0.5–5 wt.%) in aqueous media are analyzed using photon correlation spectroscopy (particle size distribution, PSD), electrophoresis (zeta potential ζ), potentiometric titration (surface charge density), and estimation of screening length of primary particles and their aggregates. The zeta potential and the PSD are affected by silica content, pH, and concentration and type of dissolved salts. Smaller but more strongly hydrated Li⁺ cations caused stronger nonlinear dependences of the zeta potential on pH and salt content than Na⁺ or K⁺. This nonlinearity is much stronger at a lower content of silica (0.5–1 wt.%) than at C _A-200 = 2.5 or 5 wt.%. At a high concentration of nanosilica (5 wt.%) the effect of K⁺ ions causes stronger diminution of the negative value of the zeta potential due to better adsorption of larger cations. Therefore, the influence of K⁺ on increasing screening length is stronger than that of Na⁺ for both primary nanoparticles and their aggregates. A similar difference in the ζ values is observed for different in size cations Ba²⁺ and Mg²⁺.      

Organoruthenium(II) thiosemicarbazone complexes: synthesis, spectral characterization, DNA binding and DNA cleavage studies

A series of new ruthenium(II) complexes were synthesized with Schiff bases derived from salicylaldehyde / o-hydroxyacetophenone/ o-vanillin / 2-hydroxy-1-naphthaldehyde with thiosemicarbazide and acetyl furan. They are characterized by elemental analysis, IR, electronic, ¹H NMR, ¹³C NMR and mass spectral studies. The elemental analysis suggests the stoichiometry to be 1:1 (metal:ligand). Four of these complexes were tested for its binding with CT-DNA using absorption spectroscopic studies and two of these complexes exhibit efficient DNA cleavage activity.      

Complexes of platinum and palladium with 4-nitrobenzoic hydrazide: synthesis and cytotoxic activity

New complexes of platinum and palladium were isolated with 4-nitrobenzoic hydrazide (4-NH) and characterized by spectroscopic techniques. Results show that the ligand is coordinated to metallic ions by the basic nitrogen of NH₂ group and have the general structure cis-[M(4-NH)₂X₂] where M= Pt or Pd and x = Cl or I. The compound III, [Pt(4-NH)₂I₂], was found to display cytotoxicity (IC₅₀ = 0.96 μmol L^?1) against the K562 tumoral cell line. This complex is significantly more cytotoxic than cisplatin.      

Amperometric determination of sulfide ion by glassy carbon electrode modified with multiwall carbon nanotubes and copper (II) phenanthroline complex

Electrocatalytic oxidation of sulfide ion on a glassy carbon electrode (GCE) modified with multiwall carbon nanotubes (MWCNTs) and a copper (II) complex was investigated. The Cu(II) complex was used due to the reversibility of the Cu(II)/Cu(III) redox couple. The MWCNTs are evaluated as a transducer, stabilizer and immobilization matrix for the construction of amperometric sensor based on Cu(II) complex adsorbed on MWCNTs immobilized on the surface of GCE. The modified GCE was applied to the selective amperometric detection of sulfide at a potential of 0.47 V (vs. Ag/AgCl) at pH 8.0. The calibration graph was linear in the concentration range of 5 µM–400 µM; while the limit of detection was 1.2 µM, the sensitivity was 34 nA µM^?1. The interference effects of SO₃ ^2?, SO₄ ^2?, S₂O₃ ^2?, S₄O₆ ^2?, Cysteine, and Cystein were negligible at the concentration ratios more than 40 times. The modified electrode is more stable with time and more easily restorable than unmodified electrode surface. Also, modified electrode permits detection of sulfide ion by its oxidation at lower anodic potentials.      

Influence of temperature on the reduction kinetics of Bi(III) ion in the presence of cystine in chlorate (VII) solutions of decreased water activity

The results of the kinetic measurements of Bi(III) electroreduction on a mercury electrode in 1–8 mol dm^?3 chlorate (VII) solutions and in the presence of cystine demonstrate a dependence of the process on the temperature. The applied electrochemical techniques (DC polarography, cyclic and SWV voltammetry) allowed for the determination of the kinetic and thermodynamic parameters and their correlation with water activity. The catalytic activity of cystine was confirmed by the decrease in overall enthalpies of activation. The changes in the values of ΔH ^≠ and ΔS ⁰ for Bi(III) electroreduction in the presence of cystine with the increase of chlorate (VII) concentration showed that the mechanism is different in solutions with low water activity as compared to those with high water activity. Probably it is connected with a different structure of the activated complexes (Bi-Hg(SR)₂), mediating electron transfer.      

Spectral properties and photophysical behaviour of water soluble cationic Mg(II) and Al(III) phthalocyanines

Peripherally and non-peripherally tetrasubstituted-[(N-methyl-2-pyridylthio)]phthalocyaninato magnesium (II) (5 and 6) and chloro aluminium (III) (7 and 8) tetraiodide have been synthesized and characterized. The photophysical properties of the complexes in dimethyl sulfoxide (DMSO) and aqueous medium in the presence and absence of cremophore EL have been studied. These complexes show high solubility in aqueous medium though they were aggregated. The triplet state quantum yields (F_T) and the triplet lifetimes (t_T) were found to be higher in DMSO with Φ_T ranging from 0.32 to 0.51, while t_T ranged from 282 to 622 ms in DMSO, compared to aqueous medium (pH 7.4 buffer) where Φ_T ranged from 0.15 to 0.19 and t_T from 26 to 35 ms. Addition of cremophore EL in aqueous solution resulted in partial disaggregation and increased photoactivity. The fluorescence lifetimes of the complexes showed strong dependence on their immediate environment. The ionic magnesium(II) and aluminium(III) phthalocyanines strongly bind to bovine serum albumin (BSA).      

Application of multivariate curve resolution-alternating least squares (MCR-ALS) for resolving pyrogallol autoxidation in weakly alkaline aqueous solutions

Multivariate curve resolution — alternating least squares (MCR-ALS) has been applied to data collected from UV/Vis spectrophotometric analysis of the autoxidation process of pyrogallol in weakly alkaline aqueous solutions. The MCR-ALS analysis was able to explain the autoxidation kinetics of pyrogallol at pH 7.4 and 8.0, allowing deduction of the pure spectra and concentration changes of different species present throughout the entire process. The autoxidation process at pH 7.4 was found to follow a first-order reaction model, with formation of purpurogallin as the sole and terminal product. Changing the pH to 8.0 not only accelerated autoxidation of pyrogallol to purpurogallin but also introduced a further autoxidation of purpurogallin. At pH 8.0 the process fits a model of two consecutive first-order reactions. The first step is formation of purpurogallin, which reacts in a further autoxidation to form a yellow colored substance, most probably purpurogallin polymer.      

Synthesis of new (arylcarbonyloxy)aminopropanol derivatives and the determination of their physico-chemical properties

Eight hydrochlorides of 3-{2-[(2/4-fluorophenoxy)-ethylamino]}-2-hydroxypropyl-4-alkoxybenzoates and four hydrochlorides of 3-tert-butylamino-2-hydroxypropyl-4-butoxybenzoates were prepared as potential antagonists of the β₁-adrenergic receptor (beta-blockers). A multistep synthesis of these compounds is described as well as their detailed analytical characterization. The pharmacokinetic properties of these weak base compounds are significantly influenced by their acid-base dissociation constant, pK _a. The knowledge of this value is crucial for new drug development. This paper is aimed at developing a methodology that utilizes pH-dependent ¹H NMR spectroscopy for its routine analysis. The selected predicted physico-chemical parameters of the new (arylcarbonyloxy)aminopropanols (i.e., aryloxyaminopropanol derivatives) were compared with the model drugs esmolol and flestolol.      

Synthesis and spectral characterization of stannocanes of the type [O(CH2CH2S)2SnR2](R=Me1,Bun2,Ph3)

The stannocanes of the type [O(CH₂CH₂S)₂SnR₂](R=Me1,Buⁿ 2,Ph3) have been synthesized in an improved method by the reaction of R₂SnCl₂ with 2, 2′-oxydiethanethiol O(CH₂CH₂SH)₂ in molar ratio of 1:1 at the presence of sodium ethoxide in anhydrous ethanol. The reactions are carried out under inert atmosphere. These compounds have been extensively characterized by FT-IR, UV-Vis spectrophotometry, multi-nuclear (¹H, ¹³C, ¹¹⁹Sn) NMR, elemental analysis and mass spectrometry. The obtained data clearly indicates that, there is a strong interaction between oxygen atom of the ligand as a donor and Sn atom of the organotin species as a Lewis acid acceptor. Therefore, the resulted dithiostannocanes possess a transannular secondary bonding and hypervalency at the central Sn atom which leads to an increase in the coordination number of tin from four to five-coordinated tin.      

Polymer conjugates with potential biological activity based on new derivatives of 2-mercaptobenzoxazole-synthesis and characterization

New potentially biologically active compounds derived from 2-mercapto-benzoxazole were synthesized and coupled on polymeric support of poly (maleic anhydride-alt-vinyl acetate) for the preparation of polymer-drug conjugates with controlled drug release. All compounds were characterized by elemental and spectroscopy (FT-IR, ¹H-NMR) analysis. The toxicological tests recommend the products for further laboratory screening.      

Voltammetric behavior and quantitative determination of ambazone concentrations in urine and in a pharmaceutical formulation

The use of square wave adsorptive stripping voltammetry (SWAdSV) in conjunction with a cyclic renewable silver amalgam film electrode (Hg(Ag)FE) for the analytical determination of ambazone in urine samples and pharmaceutical formulations is described. A single reduction peak in Britton-Robinson buffer at pH 4.0 was detected at about ?1.4 V versus Ag/AgCl. Mechanistic studies have shown that the compound can act as an electrocatalyst. The method was validated. The analytical curve was linear in the concentration range from 1.0×10^?9 to 1.0×10^?7 mol L^?1. The detection and quantification limits were found to be 3.0×10^?10 mol L^?1 and 1.0×10^?9 mol L^?1, respectively. The proposed method was successfully applied to ambazone determination in real samples.