Highly ion conductive poly(ethylene oxide)-based solid polymer electrolytes from hydrogen bonding layer-by-layer assembly

We report the development of a solid polymer electrolyte film from hydrogen bonding layer-by-layer (LBL) assembly that outperforms previously reported LBL assembled films and approaches battery integration capability. Films were fabricated by alternating deposition of poly(ethylene oxide) (PEO) and poly(acrylic acid) (PAA) layers from aqueous solutions. Film quality benefits from increasing PEO molecular weight even into the 10(6) range due to the intrinsically low PEO/PAA cross-link density. Assembly is disrupted at pH near the PAA ionization onset, and a potential mechanism for modulating PEO:PAA ratio within assembled films by manipulating pH is discussed. Ionic conductivity of 5 x 10(-5) S/cm is achievable after short exposure to 100% relative humidity (RH) for plasticization. Adding free ions by exposing PEO/ PAA films to lithium salt solutions enhanced conductivity to greater than 10(-5) S/cm at only 52% RH and tentatively greater than 10(-4) S/cm at 100% RH. The excellent stability of PEO/PAA films even when exposed to 1.0 M salt solutions led to an exploration of LBL assembly with added electrolyte present in the adsorption step. Fortuitously, the modulation of PEO/PAA assembly by ionic strength is analogous to that of electrostatic LBL assembly and can be attributed to electrolyte interactions with PEO and PAA. Dry ionic conductivity was enhanced in films assembled in the presence of salt as compared to films that were merely exposed to salt after assembly, implying different morphologies. These results reveal clear directions for the evolution of these promising solid polymer electrolytes into elements appropriate for electrochemical power storage and generation applications.     

Polypeptide multilayer films on colloidal particles: an in situ electro-optical study

The buildup of poly(L-glutamic acid) (PGA) and poly(L-lysine) (PLL) multilayers on beta-FeOOH colloidal particles was investigated by means of electro-optics and electrophoresis. The films were built at different (acidic) pH in the absence of salt. We found that the thickness of the film grows linearly when the fully charged PLL (at pH 5.5) is combined with almost fully charged PGA (at pH 6.5), with a thickness of about 2 nm per single layer. When the fully charged PLL is combined with weakly charged PGA (at pH 4.5), the film thickness increases exponentially with the number of deposited layers. The thickness of the exponentially growing film increases to 300 nm after deposition of 16 layers. The exponential film growth is attributed to the ability of the PLL to diffuse "in" and "out" of the film bulk at each deposition step. The variation in the electrical polarizability of the film-coated particles was also monitored as a function of the number of adsorbed layers. The result reveals that the PLL chains, which can diffuse into the film bulk, have no measurable contribution to the electro-optical effect of the films terminated with PLL. It is only due to the polarization of counterions of the PLL adsorbed on the film surface.     

Self-doping effect in poly(o-methoxyaniline)/poly(3-thiopheneacetic acid) layer-by-layer films

Nanostructured films from two conducting polymers, poly(o-methoxyaniline) (POMA) and poly(3-thiopheneacetic acid) (PTAA), were fabricated with the layer-by-layer (LBL) technique. The electrochemical response of the LBL films differs from that of a POMA cast film, even in a potential range where PTAA is inactive. This is attributed to differences in the diffusion-controlled charge and mass transport, where distinct ionic species participate in the LBL films, as demonstrated by quartz crystal microbalance measurements. The results show that the transport properties of conducting polymers can be changed by alternation with layers of appropriate materials in LBL films.     

Quantum dot on a rope

The conjugation of nanoparticles (NPs) typically yields supramolecular materials which are fairly rigid, and the electronic coupling between the NP and other structural units of these compounds is fixed by covalent bonds. Here, we report on a novel bichromophor system constructed from a quantum dot tethered to a semiconducting polymer, which demonstrates the possibility of the dynamic interunit coupling in the NP supramolecules. The NP bichromophoric system was made on the basis of the layer-by-layer assembled (LBL) films of an anionic polyelectrolyte with poly(p-phenylene ethynylene) backbone, aPPE, and poly(allylamine hydrochloride) PAH polycation. To conjugate CdTe NPs to the (aPPE/PAH)(m) LBL film, we took advantage of the reactive groups of NP stabilizer, that is, -COOH, and the aminogroups on PAH. Tethering of CdTe was accomplished by using poly(ethyleneglycole), PEG, chains with two reactive terminals such as t-BOC-NH-PEG-COO-NHS. The evidence for successful conjugation of NPs to the LBL films can be seen both in AFM images and in optical data. The latter also indicate that the light quanta emitted by the NPs originate from the light absorption of the polymer film, which proves the presence of the aPPE-->NP energy-transfer process. The average separation distance between the NPs tethered to the LBL films can be changed by altering the dielectric properties of the solvent affecting PEG tether coiling (water/alcohol mixture). The reduced emission intensity of aPPE was found to follow the extension of the PEG tether. The quenching of aPPE is reversible when the original composition of the solvent mixture is restored. Thus, CdTe-PEG-aPPE is an example of an organized NP system with tunable optical coupling. Variable electronic coupling offers a convenient structural platform for new nanotechnological devices for which spatial control translates into a higher level of sophistication. PEG molecules afford a wide variety of polymer chain configurations with different reactive terminals, which makes possible the preparation of diverse NP superstructures.     

Multilayers and poly(allylamine hydrochloride)-graft-poly(ethylene glycol) modified bovine serum albumin nanoparticles: Improved stability and pH-responsive drug delivery

To improve the colloidal stability of bovine serum albumin(BSA) nanoparticles(NPs) in diverse mediums, poly(allylamine hydrochloride)(PAH)/sodium poly(4-styrene sulfonate)(PSS) multilayers and poly(allylamine hydrochloride)-graft-poly(ethylene glycol)(PAH-g-PEG) coating were coated on the surface of BSA NPs.Stabilities of the BSA NPs in diverse mediums with different surfaces were detected by dynamic light scattering(DLS).Multilayers and PAH-g-PEG coated BSA NPs can be well dispersed in various mediums with a narrow polydispersity index(PDI).The BSA NPs with the highest surface density of PEG show the best stability.The multilayers and PAH-g-PEG coating do not deter the pH-dependent loading and release property of BSA NPs.At pH 9,the encapsulation efficiency of doxorubicin reaches almost 99%,and the release rate at pH 5.5 is significantly higher than that at pH 7.4.     

Elastomeric flexible free-standing hydrogen-bonded nanoscale assemblies

Poly(ethylene oxide) (PEO) is a key material in solid polymer electrolytes, biomaterials, drug delivery devices, and sensors. Through the use of hydrogen bonds, layer-by-layer (LBL) assemblies allow for the incorporation of PEO in a controllable tunable thin film, but little is known about the bulk properties of LBL thin films because they are often tightly bound to the substrate of assembly. The construction technique involves alternately exposing a substrate to a hydrogen-bond-donating polymer (poly(acrylic acid)) and a hydrogen-bond-accepting polymer (PEO) in solution, producing mechanically stable interdigitated layers of PEO and poly(acrylic acid) (PAA). Here, we introduce a new method of LBL film isolation using low-energy surfaces that facilitate the removal of substantial mass and area of the film, allowing, for the first time, the thermal and mechanical characterization that was previously difficult or impossible to perform. To further understand the morphology of the nanoscale blend, the glass transition is measured as a function of assembly pH via differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The resulting trends give clues as to how the morphology and composition of a hydrogen-bonded composite film evolve as a function of pH. We also demonstrate that LBL films of PEO and PAA behave as flexible elastomeric blends at ambient conditions and allow for nanoscale control of thickness and film composition. Furthermore, we show that the crystallization of PEO is fully suppressed in these composite assemblies, a fact that proves advantageous for applications such as ultrathin hydrogels, membranes, and solid-state polymer electrolytes.     

Open tubular capillary electrochromatography using capillaries coated with films of alkanethiol-self-assembled gold nanoparticle layers

We have used alkanethiol self-assembly and dithiol layer-by-layer (LBL) self-assembly processes to prepare an Au nanoparticle (NP)-coated open tubular capillary electrochromatography (OTCEC) column for the separation of three neutral steroid drugs (testosterone, progesterone, and testosterone propionate). The CEC column was fabricated through LBL self-assembly of Au NPs on a 3-aminopropyltrimethoxysilane (APTMS)-modified fused-silica capillary and subsequent surface functionalization of the Au NPs through self-assembly of alkanethiols. We investigated the electrochromatographic properties of the resulting Au NP-coated CEC column using a "reversed phase" test mixture of three steroid drugs. We found that the key factors affecting the separation performance were the number of Au NP layers, the length of the carbon-atom chain of the alkanethiol self-assembled on the Au NPs, the percentage of organic modifier, and the pH of the running electrolyte. This study reveals that the self-assembly of alkanethiols and dithiols onto Au NPs provides stationary phases for CEC separation that are easy to prepare and whose retention behavior is highly controllable and reproducible. We believe that our findings will contribute to further studies of the application of nanotechnology to separation science.     

Tunable drug release from hydrolytically degradable layer-by-layer thin films

The development of new thin film fabrication techniques that allow for precise control of degradation and drug release properties could represent an important advance in the fields of drug delivery and biomedicine. Polyelectrolyte layer-by-layer (LBL) thin films can be assembled with nanometer scale control over spatial architecture and morphology, yet very little work has focused on the deconstruction of these ordered thin films for controlled release applications. In this study, hydrolytically degradable LBL thin films are constructed by alternately depositing a degradable poly(beta-amino ester) (polymer 1) and a series of model therapeutic polysaccharides (heparin, low molecular weight heparin, and chondroitin sulfate). These films exhibit pH-dependent, pseudo-first-order degradation and release behavior. The highly versatile and tunable properties of these materials make them exciting candidates for the controlled release of a wide spectrum of therapeutics.     

Bioassisted synthesis of catalytic gold/silica nanotubes using layer-by-layer assembled polypeptide templates

We report the bioassisted synthesis of gold nanoparticle/silica (Au NP/silica) tubes using layer-by-layer (LBL) assembled poly(L-lysine)/poly(L-tyrosine) (PLL/PLT) multilayer films deposited on the polycarbonate (PC) membrane pores as both mediating agents and templates. The novelty of this approach is the in situ synthesis of Au NP/silica tubes using PLL/PLT multilayer films for sequential growth of Au NPs and silicas. The experimental data revealed that the buildup of the LBL multilayer films was mainly driven by the formation of hydrogen bond and the polypeptide macromolecular assemblies adopted mainly β-sheet conformation. The as-prepared Au NP/silica tubes possessed promising catalytic activity toward the reduction of p-nitrophenol. The synthesis conditions such as the concentration of gold precursor and polypeptide molecular weight were found to influence the gold weight ratio and particle size in the tubes and the catalytic properties of the Au NP/silica tubes. This approach provides a facile, robust, and green method to obtain nonaggregated metal nanoparticles immobilized in porous oxide network at ambient conditions. Using the synergy between biomimetic or bioassisted synthesis of nanostructured materials and LbL assembly technique, a variety of structures such as films, tubes, and capsules comprising of multiple compositions can be obtained.     

Silver nanocomposite layer-by-layer films based on assembled polyelectrolyte/dendrimer

Silver nanocomposite multilayer films were prepared through the in situ method. Multilayer thin films, prepared through the sequential electrostatic deposition of a positively charged third-generation poly(amidoamine) dendrimer (PAMAM) and negatively charged poly(styrenesulfonate) (PSS) and poly(acrylic acid) (PAA), were utilized as nanoreactors for the formation of silver nanoparticles. The silver ions were preorganized in layer-by-layer (LBL) films composed of PAMAM dendrimers and subsequently reduced with hydrogen to prepare the silver nanoparticles. The UV-vis spectrum and profilometer were used to characterize the regular growth of bilayers. UV-vis absorption from plasmon resonance at 435 nm and TEM images indicated the formation of the silver nanoparticles in the multilayer films. The silver nanocomposite LBL films were also constructed on the indium tin oxide-glass and investigated using cyclic voltammetry. The silver nanoparticles in the multilayer films have a stronger negative redox potential. The silver nanocomposite LBL films may have a potential application in the catalysis of reduction of 4-nitrophenol with sodium borohydride.     

Electrochemical solid-state phase transformations of silver nanoparticles

Adenosine triphosphate (ATP)-capped silver nanoparticles (ATP-Ag NPs) were synthesized by reduction of AgNO(3) with borohydride in water with ATP as a capping ligand. The NPs obtained were characterized using transmission electron microscopy (TEM), UV-vis absorption spectroscopy, X-ray diffraction, and energy-dispersive X-ray analysis. A typical preparation produced ATP-Ag NPs with diameters of 4.5 ± 1.1 nm containing ~2800 Ag atoms and capped with 250 ATP capping ligands. The negatively charged ATP caps allow NP incorporation into layer-by-layer (LbL) films with poly(diallyldimethylammonium) chloride at thiol-modified Au electrode surfaces. Cyclic voltammetry in a single-layer LbL film of NPs showed a chemically reversible oxidation of Ag NPs to silver halide NPs in aqueous halide solutions and to Ag(2)O NPs in aqueous hydroxide solutions. TEM confirmed that this takes place via a redox-driven solid-state phase transformation. The charge for these nontopotactic phase transformations corresponded to a one-electron redox process per Ag atom in the NP, indicating complete oxidation and reduction of all Ag atoms in each NP during the electrochemical phase transformation.     

Preparation and characterization of an anionic dye-polycation molecular films by electrostatic layer-by-layer adsorption process

This communication reports the formation and characterization of self-assembled films of a low molecular weight anionic dye amaranth and polycation poly(allylamine hydrochloride) (PAH) by electrostatic alternating layer-by-layer (LBL) adsorption. It was observed that there was almost no material loss occurred during adsorption process. The UV-vis absorption and fluorescence spectra of amaranth solution reveal that with the increase in amaranth concentration in solution, the aggregated species starts to dominate over the monomeric species. New aggregated band at 600 nm was observed in amaranth-PAH mixture solution absorption spectrum. A new broad low intense band at the longer wavelength region, in the amaranth-PAH mixture solution fluorescence spectrum was observed due to the closer association of amaranth molecule while tagged into the polymer backbone of PAH and consequent formation of aggregates. The broad band system in the 650-750 nm region in the fluorescence spectra of different layered LBL films changes in intensity distribution among various bands within itself, with changing layer number and at 10 bilayer LBL films the longer wavelength band at 710 nm becomes prominent. Existence of dimeric or higher order n-meric species in the LBL films was confirmed by excitation spectroscopic studies. Almost 45 min was required to complete the interaction between amaranth and PAH molecules in the one-bilayer LBL film.     

Stable aqueous nanoparticle film assemblies with covalent and charged polymer linking networks

The construction of highly stable and efficiently assembled multilayer films of purely water soluble gold nanoparticles is reported. Citrate-stabilized nanoparticles (CS-NPs) of average core diameter of 10 nm are used as templates for stabilization-based exchange reactions with thioctic acid to form more robust aqueous NPs that can be assembled into multilayer films. The thioctic acid stabilized nanoparticles (TAS-NPs) are networked via covalent and electrostatic linking systems, employing dithiols and the cationic polymer poly(L-lysine), respectively. Multilayer films of up to 150 nm in thickness are successfully grown at biological pH with no observable degradation of the NPs within the film. The characteristic surface plasmon band, an optical feature of certain NP film assemblies that can be used to report the local environment and core spacing within the film, is preserved. Growth dynamics and film stability in solution and in the air are examined, with poly(L-lysine) linked films showing no evidence of aggregation for at least 50 days. We believe these films represent a pivotal step toward exploring the potential of aqueous NP film assemblies as a sensing apparatus.     

Effects of copolymer concentration and chain length on the pH-responsive behavior of diblock copolymer micellar films

The pH-responsive behavior of adsorbed diblock copolymer films of PDMA-PDEA (poly(2-(dimethylamino)ethyl methacrylate)-block-poly(2-(diethylamino)ethyl methacrylate)) on silica has been characterized using a quartz crystal microbalance with dissipation monitoring (QCM-D), an optical reflectometer (OR) and an atomic force microscope (AFM). The copolymer was adsorbed at pH 9 from various copolymer concentrations; QCM-D measurements indicate that the level of desorption when rinsed at pH 9 depends on the initial copolymer concentration. The adsorbed films produced at pH 9 generally have low charge densities; adjusting the solution pH to 4 results in a significant protonation of the constituent copolymers and a related interfacial structural change for the copolymer film. OR studies show no significant change during pH cycling, while QCM-D measurements indicate that the adsorbed mass and dissipation alter dramatically in response to the solution pH. The difference between the QCM-D adsorbed masses and dissipation values at pH 4 and 9 were found to be dependent on the initial copolymer concentration. This is due to differences in the initial conformations within the adsorbed copolymer layers at pH 9. The effect of the PDMA chain length on the pH-responsive behavior has also been studied; both the QCM-D adsorbed mass and dissipation of PDMA54-PDEA24 (shorter PDMA block) at pH 4 and 9 were observed to be greater than those of PDMA9X-PDEA2Y (longer PDMA block). This suggests that the normal extension of the adsorbed PDMA54-PDEA24 copolymer films is more significant than that of the PDMA9X-PDEA2Y films on silica.     

Multilayered assemblies composed of brilliant yellow and poly(allylamine) for an optical pH sensor.

Multilayered thin films containing poly(allylamine) (PAA) and brilliant yellow (BY) were prepared on a quartz slide by a layer-by-layer (LBL) deposition technique. The UV-visible spectra of the PAA/BY films were sufficiently changed depending upon the pH value of the solution in which the film was immersed. The response of the PAA/BY films was very fast (within a second) upon pH change from 9.0 to 5.0, while the response time was ca. 100 s upon pH change from 5.0 to 9.0.     

Influence of the polyelectrolyte molecular weight on exponentially growing multilayer films in the linear regime

Alternated deposition of polyanions and polycations on a charged solid substrate leads to the buildup of polyelectrolyte multilayer (PEM) films. Two types of PEM films were reported in the literature: films whose thickness increases linearly and films whose thickness increases exponentially with the number of deposition steps. However, it was recently found that, for exponentially growing films, the exponential increase of the film thickness takes place only during the initially deposited pairs of layers and is then followed by a linear increase. In this study, we investigate the growth process of hyaluronic acid/poly(L-lysine) (HA/PLL) and poly(L-glutamic acid)/poly(allylamine) (PGA/PAH) films, two films whose growth is initially exponential, when the growth process enters the linear regime. We focus, in particular, on the influence of the molecular weight (Mw) of the polyelectrolytes. For both systems, we find that the film thickness increment per polyanion/polycation deposition step in the linear growth regime is fairly independent of the molecular weights of the polyelectrolytes. We also find that when the (HA/PLL)n films are constructed with low molecular weight PLL, these chains can diffuse into the entire film during each buildup cycle, even for very thick films, whereas the PLL diffusion of high molecular weight chains is restricted to the upper part of the film. Our results lead to refinement of the buildup mechanism model, introduced previously for the exponentially growing films, which is based on the existence of three zones over the entire film thickness. The mechanism no longer needs all the "in" and "out" diffusing polyanions or polycations to be involved in the buildup process to explain the linear growth regime but merely relies on the interaction between the polyelectrolytes with an upper zone of the film. This zone is constituted of polyanion/polycation complexes which are "loosely bound" and rich in the polyelectrolyte deposited during the former deposition step.     

Multicompartment films made of alternate polyelectrolyte multilayers of exponential and linear growth

The layer by layer deposition process of polyelectrolytes is used to construct films equipped with several compartments containing "free polyelectrolytes". Each compartment corresponds to a stratum of an exponentially growing polyelectrolyte multilayer film, and two consecutive compartments are separated by a stratum composed of a linearly growing multilayer that acts as a barrier preventing polyelectrolyte diffusion from one compartment to another. We use hyaluronic acid/poly(L-lysine) as the system to build the compartments and the poly(styrene sulfonate)/poly(allylamine) system for the barrier. Using confocal microscopy, it is shown that poly(L-lysine) diffuses only within the compartment in which it was initially introduced during the film construction and is thus unable to cross the barriers. Using fluorescein isothiocyanate as a pH indicator, it is also shown that although poly(styrene sulfonate)/poly(allylamine) multilayers act as a barrier for polyelectrolytes, they do not prevent proton diffusion through the film. Such films open the route for multiple functionalization of biomaterial coatings.     

Self-assembled films of cellulose nanofibrils and poly(<Emphasis Type="Italic">o</Emphasis>-ethoxyaniline)

Nanostructured films of poly(o-ethoxyaniline) (POEA) alternated with cellulose nanofibrils (CnF) were successfully produced by self assembly (SA) at different pH values and investigated by atomic force microscopy and ultraviolet-visible spectroscopy. Results show that it was possible to build up films by alternating POEA and CnF layers with relatively precise architectural control by controlling the number of layers and pH. Film thickness had a dependence on pH which is a combination of the effects of the deposited amount for each POEA layer and the pH at which the absorption of the cellulose nanofibrils was carried out. Comparison of alternated layers of POEA and CnF with multi-immersions of POEA at different pH values, as measured by the ratio between slopes of the straight lines of deposited amount of polymer versus the number of self-assembled layers, shows that alternate deposition at pH 2 has a fourfold increase in the slope. Alternatively, at pH 5, there is no significant difference whether the deposition is alternated (POEA–CnF) or not (POEA).     

Metal ion-enriched polyelectrolyte complexes and their utilization in multilayer assembly and catalytic nanocomposite films

The mixing of Ag ion-doped poly(ethyleneimine) (PEI) and poly(acrylic acid) (PAA) produced Ag ion-doped polyelectrolyte complex particles (PECs) in solution. Positively charged Ag ion-doped PECs (Ag ion PECs) with a spherical shape were deposited alternatively with PAA to form a multilayer assembly. The multilayered film containing Ag ion PECs was reduced to generate a composite nanostructure. Metal nanoparticle (NP)-enriched nanocomposite films were formed by an additional process of the postadsorption of precursors on PECs within the nanocomposite films, which resulted in the enhancement of the catalytic and electrical properties of the composite films. Because the films contain PECs that are responsive to changes in pH and most of the NPs are embedded in the PECs, interesting catalytic properties, which are unexpected in a particle-type catalyst, were observed upon pH changes. As a result of the reversible structural changes of the films and the immobilization of the NPs within the films, the film-type catalysts showed enhanced performance and stability during catalytic reactions under various pH conditions, compared to particle-type catalysts.