Valence state of Mo and surface coverage of alumina by molybdenum-oxygen species in MoOx/Al2O3

CO₂ chemisorption, BET surface area and the degree of reduction of Mo(VI) (e/Mo) have been determined in MoO_x/Al₂O₃ samples, reduced with hydrogen at temperatures between 673 and 1173 K. The free alumina surface figures calculated from the surface area and e/Mo values were identical with those obtained from direct CO₂ chemisorption measurements. This identity indicates that all of the oxygen ions of the surface molybdenum-oxygen species block the alumina surface.     

Al含量对Pt-SO2-4 /ZrO2-Al2O3固体超强酸催化

通过向SO^2-₄ /ZrO₂催化剂中同时引入适量的Pt和Al₂O₃, 制备出了具有较高催化性能和稳定性的Pt-SO^2-₄ /ZrO₂-Al₂O₃型固体超强酸催化剂. 以正戊烷异构化反应为探针, 考察了Al含量对催化剂性能的影响; 并采用X射线衍射(XRD)、比表面积测定(BET)、红外(IR)光谱、程序升温还原(TPR)、热重-差热分析(TG-DTA)和氨-程序升温脱附(NH₃-TPD)手段对催化剂进行了表征. 结果表明, Al能够提高ZrO₂的晶化温度, 抑制硫的分解, 增加催化剂的比表面积, 增强硫氧键的结合, 提高催化剂的还原性能, 增加催化剂的酸强度和酸总量. 当Al₂O₃含量(质量分数, w)为5.0%时, Pt-SO^2-₄ /ZrO₂-Al₂O₃固体超强酸催化剂的催化活性最好, 在100 h内异戊烷收率可稳定在52.0%以上, 选择性在98.2%以上.     

Comparative study of LaNiO3 and La2NiO4 catalysts for partial oxidation of methane

The catalytic activity and stability of LaNiO₃ and La₂NiO₄, prepared using a citric acid complex method, have been investigated for partial oxidation of methane (POM) to synthesis gas. The catalysts were characterized by thermo-gravimetric analysis (TG), temperature-programmed reduction (TPR) and temperature-programmed desorption of ammonia (NH₃-TPD). The results show that the catalytic activity and stability of La₂NiO₄ are higher than those of LaNiO₃, due to the stronger interactions between Ni and La₂O₃ in La₂NiO₄ and to its lower acidity as demonstrated by TPR and NH₃-TPD. TG result indicates that carbon deposition occurs on both catalysts, and the carbon species deposited on La₂NiO₄ are mainly metal carbides, while on LaNiO₃ are mainly graphite.     

Hydrogen effects on the electric conductivity of a Pt/Al2O3 catalyst

Hydrogen desorption, hydrogen spillover and reduction processes have been evidenced using a new experimental strategy based on AC electric conductivity measurements during TPD and TPR experiments on a 0.5% Pt/Al₂O₃ catalyst.     

Isothermal gravimetry and magnetic properties of CoOMoO3γAl2O3 catalysts

Isothermal gravimetry and magnetic susceptibility of MoO₃, MoAl₂O₃, CoAl₂O₃ and CoMoAl₂O₃ with/without Na⁺ ions have been studied in order to investigate the reducibility of the systems in H₂ H₂—hydrocarbons and H₂—hydro-carbon—thiophene. These studies have evidenced the formation of metallic cobalt during reduction of cobalt—moly catalysts containing Na⁺ ions in the Al₂O₃ support. This metallic cobalt accelerates the reduction of supported MoO₃. However, in the absence of sodium, cobalt exerts an inhibitory influence on the reduction of MoAl₂O₃. The inhibition is caused mainly due to retention of the water evolved during the process by well-dispersed Co²⁺ ions which are incapable of undergoing reduction. The presence of sulfur also kelps in suppressing the reduction to cobalt metal.     

Effect of Mo content in MoO3/g-Al2O3 on the catalytic activity for transesterification of dimethyl oxalate with phenol

The influence of molybdenum content on the catalytic performance in the transesterification of dimethyl oxalate (DMO) with phenol to methyl phenyl oxalate (MPO) and diphenyl oxalate (DPO) was investigated. The results indicated that the MoO₃/Al₂O₃ catalyst with 14 wt% Mo content gave maximal DPO yield with 6.1% and 75.1% DMO conversion. The component, structure and phase of MoO₃/Al₂O₃ catalysts were characterized by means of X-ray diffraction (XRD), BET specific surface area, temperature-programmed desorption of ammonia (NH₃-TPD), and FTIR analysis of adsorbed pyridine. This revised version was published online in June 2006 with corrections to the Cover Date.     

Promoting effect of Mg in supported Mo/HBeta–Al2O3 catalyst for cross-metathesis of ethene and butene-2 to propene

Promoting effects of Mg in heterogeneous Mo/HBeta–Al₂O₃ catalyst have been carefully studied for cross-metathesis of ethene and butene-2 to propene. The catalyst shows good stability with Mg content in the range of 1–2 wt%. Such effect may be attributed to the elimination of weak acid sites through introduction of Mg which suppresses the side olefin oligomerization reaction, as evidenced from NH₃-TPD and ¹H MAS NMR results. Addition of more Mg content to 3 wt% may change the state and reducibility of Mo species, as indicated from the UV–vis, UV-Raman and H₂-TPR measurements. The increasing difficulty for the reduction of Mo(VI) species is closely related with the poor performance of 3 wt% Mg–4Mo/HBeta–30% Al₂O₃ catalyst in the metathesis reaction.     

Vapor phase hydrofluorination of acetylene to vinyl fluoride over La2O3-Al2O3 catalysts

A series of La-doped Al₂O₃ catalysts were prepared and tested for the vapor phase hydrofluorination of C₂H₂ to vinyl fluoride (CH₂CHF, VF). It was found that the La-doped catalyst gave a stable catalytic performance and a higher selectivity to the desired VF and a lower selectivity to coke deposition compared with the pure Al₂O₃ catalyst. The enhancement in VF selectivity on the La-doped catalyst was due to the elimination of acidic sites on the Al₂O₃ surface by the addition of La₂O₃, evidenced by NH₃-TPD results, which could also explain the declined selectivity to coke deposition on the catalyst. Raman result indicated there were two different vibration forms of CH distortion and CC expansion for the coke deposition.     

Characterization and evaluation of Fe2O3/Al2O3 oxygen carrier prepared by sol–gel combustion synthesis

The sol-gel combustion synthesis (SGCS) for oxygen carrier (OC) to be used in chemical looping combustion (CLC) was first designed and experimented in this work, which is a new method of OC synthesis by combining sol-gel technique and solution combustion synthesis. Cheap hydrated metal nitrates and urea were adopted as precursors to prepare Fe₂O₃/Al₂O₃ OC at the molar ratio to unity (Fe1Al1), which was characterized through various means, including Fourier transforms infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), differential thermal analysis (DTA), X-ray diffractor (XRD), and N₂ isothermal adsorption/desorption method. FTIR analysis on the chemical structure of the dried gel of Fe1Al1 indicated that urea was partly hydrolyzed and the hydrated basic carbonate was formed by the combination of groups such as (Fe(_1−yAl_y)_1−xO_1−3x, CO₃²⁻ and -OH-. By analyzing the staged products during SGCS, calcination was found as a necessary step to produce Fe₂O₃/Al₂O₃ OC with separate phases of α-Fe₂O₃ and α-Al₂O₃. Through TGA-DTA, the decomposition of the dried gel was found to undergo five stages. The analysis of the evolved gases from the gel decomposition using FTIR partially confirmed the staged decomposition and assisted a better understanding of the mechanism of SGCS. XRD identification further substantiated the necessity of calcination to synthesize Fe₂O₃/Al₂O₃ OC with separate phases of α-Fe₂O₃ and α-Al₂O₃, though it was not necessary for the synthesis of single phase α-Fe₂O₃ and α-Al₂O₃. Structural characterization performed on N₂ adsorption analyzer displayed that the pore shape of Fe1Al1 particles was heterogeneous. Finally, H₂ temperature-programmed reduction (TPR) of Fe1Al1 products in TGA indicated that the reduction reaction of Fe1Al1 OC after calcination was a single step reaction from α-Fe₂O₃ to Fe, and calcination benefited to improve the transfer rate of the lattice oxygen from the OC to fuel H₂. Furthermore, four times of reduction and oxidization (redox) reaction by alternating with H₂ and air demonstrated the synthesized OC had good reactivity and sintering-resistance, much suitable to be used in the realistic CLC. Overall, the SGCS method was found superior to other existent methods to prepare Fe₂O₃/Al₂O₃ OC for CLC application.     

Fluoride modification of Mo/Al2O3 catalysts: Characterization of the changes induced in support and Mo phases

The characterization of fluoride-modified Mo/Al₂O₃ catalysts was performed in order to investigate on the effect that low levels of fluoridation of the alumina support (0-2.0 wt.%) cause on the support itself and on the supported Mo oxide and sulfide phases. Fluoride-modified Al₂O₃ supports and Mo/Al₂O₃ catalysts where characterized by nitrogen physisorption, scanning electronic microscopy (SEM-EDX), isoelectric point (IEP), Fourier transform infrared spectroscopy (FT-IR), infrared spectroscopy of adsorbed CO₂ (IR-CO₂), and temperature programmed reduction (TPR). The dispersion of the sulfided catalysts was estimated by dynamic NO chemisorption. The results indicate that the different hydroxyl types present on the alumina surface react to a different extent with fluoride and that it is the most basic hydroxyl groups that are titrated first.The consumption of the alumina OH by F⁻, inhibits, during the deposition of Mo, the formation of tetrahedral molybdenum oxide species in strong interaction with the support, leading to an increased number of polymeric octahedral Mo surface species. The NO adsorption results put in evidence a drop in the dispersion of the MoS₂ phase present in the sulfided samples.     

X-ray photoelectron study of the interaction of H<Subscript>2</Subscript> and H<Subscript>2</Subscript>+O<Subscript>2</Subscript> mixtures on the Pt/MoO<Subscript>3</Subscript> model catalyst

The effects of H₂ and H₂ + O₂ gas mixtures of varying composition on the state of the surface of the Pt/MoO₃ model catalyst prepared by vacuum deposition of platinum on oxidized molybdenum foil were investigated by X-ray photoelectron spectroscopy (XPS) at room temperature and a pressure of 5–150 Torr. For samples with a large Pt/Mo ratio, the XP spectrum of large platinum particles showed that the effect of hydrogen-containing mixtures on the catalyst was accompanied by the reduction of molybdenum oxide. This effect results from the activation of molecular hydrogen due to the dissociation on platinum particles and subsequent spill-over of hydrogen atoms on the support. The effect was not observed at low platinum contents in the model catalyst (i.e., for small Pt particles). It is assumed for the catalyst that the loss of its hydrogen-activating ability is a consequence of the formation of platinum hydride. Possible participation of platinum hydride as intermediate in hydrogen oxidation to H₂O₂ is discussed.     

Preparation of ZrO2-TiO2-CeO2 and Its Application in the Selective Catalytic Reduction of NO with NH3

TiO₂,ZrO₂-TiO₂,andZrO₂-TiO₂-CeO₂ were prepared by co-precipitation method and characterized by X-ray diffraction (XRD), specific surface area measurements (BET), temperature programmed desorption (NH₃-TPD), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results showed that ZrO₂-TiO₂-CeO₂ exhibited large number of surface strong acid, possessed some oxygen storage capacity, and strong redox property. The three materials were used as supports and the monolith catalysts were prepared with 1% (w) V₂O₅ and 9% (w)WO₃ for selective catalytic reduction (SCR) of NO with ammonia in the presence of excessive O₂, and the results of catalytic activity showed that the catalyst used ZrO₂-TiO₂-CeO₂ as support yielded nearly 100% NO conversion at 275 °C at a gas hourly space velocity (GHSV) of 10000 h⁻¹, and it had the best catalytic activity and showed great potential for practical application.     

The support and characterization of C60 and MoO3 on Al2O3

A new type of catalyst from supporting C₆₀ on MoO₃ and Al₂O₃ has been prepared. The effect of different order of impregnation and calcination atmosphere on catalyst are investigated by the solution test in toluene, UV-VIS spectroscopy and temperature programmed reduction (TPR). The results show that when the catalyst was prepared by supporting MoO₃ on C₆₀/Al₂O₃ and calcined in N₂, there is a stronger interaction between C₆₀, MoO₃ and Al₂O₃, but when supporting C₆₀ on MoO₃/Al₂O₃, the interaction is relatively weak. We consider that in the former method a new complex, Mo–C₆₀–O–Al, is formed.     

Pt LIII-edge XANES and EXAFS studies on γ-Al2O3 supported Pt catalysts

Pt L_III-edge XANES and EXAFS were employed to investigate the nature of Pt/γ-Al₂O₃, Pt−Sn/γ-Al₂O₃ and Pt−Fe/γ-Al₂O₃ catalysts. The results indicated that Pt species on these catalysts were all in the oxidized states before reduction, and in the metallic states after reduction. The dispersity of the Pt species on the catalysts was very high after reduction. The electronic properties of the highly dispersed Pt species were different from that of the bulk Pt in large crystallites. An interaction between Pt and the metal-oxide modified γ-Al₂O₃ support is proposed. The interaction improved the dispersity of the Pt species on the catalysts and is thought to be the reason for the enhanced activity and selectivity for dehydrogenation reactions over these catalysts.     

Effect of La2O3 on Catalytic Performance of Au/TiO2 for CO Oxidation

Pure TiO₂ and La-doped TiO₂ were prepared by the sol-gel method. Au was supported on TiO₂ by the deposition-precipitation (DP) method, and its catalytic activity for CO oxidation was tested. The results showed that doping La in Au/TiO₂ could improve its catalytic activity obviously for CO oxidation. The analyses of X-ray diffraction (XRD), temperature-programmed desorption (TPD), and Brunauer-Emmett-Teller (BET) surface area further showed that the presence of La in TiO₂ not only increased its surface area and restrained the growth of TiO₂ crystallites, but could also enhance the microstrain of TiO₂. In terms of O₂-TPD, a new adsorbed species O⁻ appeared on the surface of La-doped TiO₂. The results of in-situ Fourier transform-infrared (FT-IR) spectroscopy illustrated that the high activity of Au/La₂O₃-TiO₂ was attributed to the presence of La promoting the reactivity of CO adsorbed on the Au site and the formation of the second active site on the surface of TiO₂     

Co或Ni促进的Cu/SiO2-Al2O3催化剂上丙三醇和苯胺气相合成3-甲基吲哚

对丙三醇和苯胺在Co或Ni促进的Cu/SiO2-Al2O3催化剂上气相合成3-甲基吲哚进行了研究.采用N2吸附、氢气程序升温还原(H2-TPR)、电感耦合等离子体(ICP)发射光谱、X射线衍射(XRD)、透射电子显微镜(TEM)、氨程序升温脱附(NH3-TPD)及热重(TG)分析等技术对催化剂进行了表征.结果表明,向Cu/SiO2-Al2O3催化剂加入钴或镍助剂改善了催化剂的催化性能,钴比镍更加有效.在催化剂Cu-Co/SiO2-Al2O3和Cu-Ni/SiO2-Al2O3上,反应第3 h,3-甲基吲哚收率分别达到47%和45%,而且催化剂经过6次再生收率仍能达到44%和42%.各种表征表明,向Cu/SiO2-Al2O3催化剂加入钴或镍助剂能增强铜和载体之间的相互作用,其结果不仅促进了铜粒子在载体表面的分散度,而且有效减少了反应过程中铜组分的流失.另外,加入钴或镍助剂还能减少催化剂的中强酸中心数,从而提高3-甲基吲哚的选择性,并且抑制积炭的形成.此外,钴助剂还能增加催化剂的弱酸中心数,促进3-甲基吲哚的生成.提出了金属铜与弱酸中心共同促进3-甲基吲哚合成的催化反应机理.     

国产航空煤油裂解催化剂Pt/ZrxTixAl1-2xO2的性能

采用共沉淀法制备了一系列Zr_xTi_xAl_1-2xO₂复合氧化物载体材料,考察了其作为裂解催化剂载体对航空煤油裂解反应的影响.?采用全自动吸附仪、X射线衍射、扫描电镜/能谱仪联用、NH₃-程序升温脱附等手段对催化剂进行了表征.?结果表明,当ZrO₂：TiO₂：Al₂O₃质量比为1：1：3时催化剂具有最大的比表面积和孔容;具有最强的表面酸性和最集中的强酸中心密度,且具有良好的再生功能.?实验结果表明,载体ZrO₂：TiO₂：Al₂O₃质量比为1：1：3时催化剂上650?℃裂解产气量较热裂解提高了2.1倍,700?℃时提高1.4倍.?另外,该系列载体材料经1000?℃焙烧5?h后,所制得的催化剂几乎失去了催化活性.     

Effect of conversion of NO2 into no on the catalytic reduction of NO2 with C3H6 in excess O2

During the reduction of NO₂ by C₃H₆ in O₂ over alumina-supported Au, Rh and Pt it was found that three parallel reactions take place,i.e., reduction of NO₂ to N₂ and N₂O, partial decomposition of NO₂ to NO and oxidation of C₃H₆ to CO and CO₂. In the absence of C₃H₆, the NO₂→NO+O₂ reaction reaches a fast equilibrium on Rh and Pt but not on Au and γ-Al₂O₃. Addition of C₃H₆ to the NO₂+O₂ mixture leads to the formation of NO above equilibrium conversion levels.     

Oxidative addition of hydrogen in the “reduced” Mo/Al2O3 catalysts

An X-ray photoelectron spectroscopy study of Mo/Al₂O₃ catalysts prepared via [Mo^V ₂O₄(C₂O₄)₂(H₂O)₂]^2- complexes showed that after heating the catalysts with hydrogen in the spectrometer chamber, the position of the Mo3d line shifted to higher values of binding energy. This shift is interpreted as oxidative addition of hydrogen to the surface Mo species. A similar phenomenon was observed for a CO treated catalyst. A temperature-programmed desorption study has shown that hydrogen is strongly bounded to Mo and can only be removed from the catalysts at temperatures as high as 500°C. This revised version was published online in June 2006 with corrections to the Cover Date.     

Enhancing effect of water vapor on the reduction of lean NOx by ethanol over an Ag/Al2O3 catalyst supported on cordierite honeycomb

The Ag/Al₂O₃ catalyst supported on cordierite honeycomb (Ag/Al₂O₃/ cordierite) is highly active forthe reduction of lean NOx by ethanol. Addition of H₂O enhances the NOx reduction to CO₂ and N₂, and suppresses the formation of by-products such as CO, CH₃CHO and C₂H₄.