Affinity screening by packed capillary high performance liquid chromatography using molecular imprinted sorbents. II. Covalent imprinted polymers

This study concentrates on the production of covalent molecular imprint polymers (MIPs) as highly selective sorbents for nortriptyline (NOR), a representative tricyclic antidepressant (TCA). The functionalized template contains a polymerizable 4-vinylphenyl carbamate moiety used to bind the template molecule to the polymer matrix. Polymerization with a cross-linker followed by hydrolytic cleavage of the labile carbamate functionality leaves an MIP with selective binding sites capable of binding template through hydrogen bonding interactions. Demonstrated chromatographically through a "selection index", these MIPs showed high selectivity for the template molecule (NOR) among a library of structurally similar compounds. The recognition was found to correlate with structural similarity to the template compound. A direct comparison between covalent and non-covalent molecular imprinting strategies reveals a great deal of improvement in the peak shape of the retained compound resulting from covalent imprinting (evidenced by peak asymmetry factors A.).     

Preparation of molecularly imprinted polymers via atom transfer radical “bulk” polymerization

The first application of atom transfer radical “bulk” polymerization (ATRBP) in molecular imprinting is described, which provides molecularly imprinted polymers (MIPs) with obvious imprinting effects towards the template, very fast binding kinetics, and an appreciable selectivity over structurally related compounds. In comparison with the MIP prepared via the normally used traditional “bulk” free radical polymerization (BFRP), the MIPs obtained via ATRBP showed somewhat lower binding capacities and apparent maximum numbers N_max for high‐affinity sites as well as quite similar binding association constants K_a for high‐affinity sites and high‐affinity site densities, in contrast with the previous reports (e.g., nitroxide/iniferter‐mediated “bulk” polymerization provided MIPs with improved properties). This is tentatively ascribed to the occurrence of rather fast gelation process in ATRBP, which greatly restricted the mobility of the chemical species, leading to a heavily interrupted equilibrium between dormant species and active radicals and heterogeneous polymer networks. In addition, the general applicability of ATRBP was also confirmed by preparing MIPs for different templates. This work clearly demonstrates that applying controlled radical polymerizations (CRPs) in molecular imprinting not always benefits the binding properties of the resultant MIPs, which is of significant importance for the rational use of CRPs in generating MIPs with improved properties. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 532–541, 2010     

Synthesis and chromatographic evaluation of molecularly imprinted polymers prepared by the substructure approach for the class-selective recognition of glucuronides

Two series of molecularly imprinted polymers (MIPs) for the class-selective recognition of glucuronides have been prepared by using lipophilic substructures of the target analyte as template molecule and potent host monomers against oxyanions, that are expected to establish a strong stoichiometric interaction with the single carboxylic group of the template. The polymers were tested as stationary phases in liquid chromatography for specific recognition. A preliminary investigation of the imprinting properties of eleven MIPs was carried out, by comparing the retention time of the template and of structurally related compounds on the MIP column with that on the corresponding non-imprinted polymer (NIP). The two polymers showing the best performance were selected to further test cotinine, mycophenolic acid, testosterone and their respective glucuronides as model compounds. The high specificity obtained against glucuronides and the different chemical structure of the parent drug make the two MIPs class-selective imprinted receptors, also suitable for SPE application.     

Synthesis and Evaluation of Molecularly Imprinted Polymers as Sorbents for Selective Extraction of Coumarins

Coumarin, 7-hydroxycoumarin and dicoumarol molecularly imprinted polymers (MIP) were synthesized by bulk polymerization. Methacrylic acid and 4-vinylpyridine were tested as functional monomers and methanol, ethanol, acetonitrile, toluene and chloroform were tested as porogens. The binding capabilities of the imprinted polymers were assessed by equilibrium binding analysis. Highest binding capacity was obtained for MIP prepared for the template 7-hydroxycoumarin synthesized in methacrylic acid as functional monomer, chloroform as porogen and methanol/water as analyte solvent. Scanning electron microscopy analysis documented its appropriate morphology. ATR-FTIR spectra confirmed successful polymerization of MIP. Coumarin structural analogues were employed to evaluate the polymer selectivity and it was found that polymer prepared for 7-hydroxycoumarin was selective for its template molecule. Kinetic studies showed relatively fast adsorption of analytes to MIPs (1 h). Rebinding properties of MIPs were evaluated by adsorption isotherms. The calculated data fitted well with experimental data showing that Freundlich isotherm is suitable for modelling the adsorption of tested coumarins on prepared MIPs. Applicability of polymer prepared for 7-hydroxycoumarin was tested for the selective extraction of coumarins from the sample of chicory.     

Preparation,evaluation and characterization of quercetin-molecularly imprinted polymer for preconcentration and clean-up of catechins

Molecularly imprinted polymer (MIP) for solid extraction and preconcentration of catechins have been successfully prepared by a thermal polymerization method using quercetin as template, 4-vinylpyridine as functional monomer and ethylene glycol dimethacrylate as crosslinker. A solution mixture of acetone and acetonitrile was used as porogen. Systematic investigations of the influence of monomer, cross-linker, porogen, as well as polymerization conditions on the properties of the MIPs were carried out. The quercetin MIPs were evaluated according to their selective recognition properties for quercetin, structurally related compounds (catechin, epigallocatechin gallate and epicatechin) and a unrelated compound of similar molecular size (α-tocopherol). Good binding was observed for quercetin, catechin and epigallocatechin gallate with an optimized MIP in a solid phase extraction system. Adsorption and kinetic characteristics were evaluated for catechins which indicated that the synthesized polymer had high adsorption capacity and contained homogeneous binding sites. Chemical and morphological characterization of the MIP was investigated by FTIR, SEM and BET, which confirmed a high degree of polymerization. Finally, the MIP was successfully applied to the clean-up and preconcentration of catechins from several natural samples.     

Molecular imprinting technology in capillary electrochromatography

Molecularly imprinted polymers (MIPs) are tailor-made synthetic polymers with a predetermined selectivity for a given analyte, or group of structurally related compounds, that make them ideal materials for use as stationary phases in affinity chromatography. However, extensive peak broadening and tailing, especially of the more retained compound (normally the template) are often observed. Thus, huge efforts have been made during recent years to use MIPs in capillary electrochromatography, which is inherently a more efficient chromatographic technique than conventional HPLC. Accordingly, this paper gives an overview of the attempts carried out in the recent past to improve the chromatographic performance of MIPs in capillary electrochromatography as well as more recent applications. It is concluded that MIPs are very promising materials for use as selective stationary phases in CEC.     

Synthetic creatinine receptor: imprinting of a Lewis acidic zinc(II)cyclen binding site to shape its molecular recognition selectivity

Molecularly imprinted polymers (MIPs) from polymerizable Lewis acidic zinc(II)cyclen complexes and ethylene glycol dimethyl acrylate have been prepared. For the imprinting process the template molecule creatinine is reversibly coordinated to the zinc atom. The high strength of this interaction allows analyte binding to the MIP from aqueous solution with high affinity. Its pH dependence is used for controlled guest release with nearly quantitative analyte recovery rate. The binding capacity and selectivity profile of the MIP remains constant through several pH controlled binding and release cycles. MIPs missing a suitable metal binding site showed no significant affinity for thymine or creatinine. Flavin adsorbs nonspecifically to all polymers. The imprinting process reverses the binding selectivity of zinc(II)cyclen for creatinine and thymine from 1:34 in homogeneous solution to 3.5:1 in the MIP. Scatchard plot analysis of creatinine binding isotherms reveals uniform binding of the imprint, with fits indicating a one-site model; however, similar analysis for thymine indicate high and low affinity sites. This corresponds to unrestricted coordination sites freely accessible for thymine, e.g., at the polymer surface, and misshaped imprinted sites, which still can accommodate thymine. More than 50% of all binding sites exclusively bind creatinine and are not accessible to thymine. The binding properties of a copolymer of polymerizable zinc(II)cyclen and ethylene glycol dimethyl acrylate missing the creatinine template, which match the binding selectivity of the complex in solution, confirm that the origin of altered selectivities is the imprinting process. With binding ability at physiological pH, the MIPs are applicable for tasks in medicinal diagnostics or biotechnology. Imprinted zinc(II)cyclen complexes provide, like a metalloenzyme binding motif, high binding affinity by reversible coordination while the surrounding macromolecule determines binding selectivity.     

Investigation of imprinting parameters and their recognition nature for quinine-molecularly imprinted polymers

A series of molecularly imprinted polymers (MIPs) was prepared using quinine as the template molecules by bulk polymerization. The presence of monomer-template solution complexes in non-covalent MIPs systems has been verified by both fluorescence and UV-vis spectrometric detection. The influence of different synthetic conditions (porogen, functional monomer, cross-linkers, initiation methods, monomer-template ratio, etc.) on recognition properties of the polymers was investigated. Scatchard analysis revealed that two classes of binding sites were formed in the imprinted polymer. The corresponding dissociation constants were estimated to be 45.00 micromol l(-1) and 1.42 mmol l(-1), respectively, by utilizing a multi-site recognition model. The binding characteristics of the imprinted polymers were explored in various solvents using equilibrium binding experiments. In the organic media, results suggested that polar interactions (hydrogen bonding, ionic interactions, etc.) between acidic monomer/polymer and template molecules were mainly responsible for the recognition, whereas in aqueous media, hydrophobic interactions had a remarkable non-specific contribution to the overall binding. The specificity of MIP was evaluated by rebinding the other structurally similar compounds. The results indicated that the imprinted polymers exhibited an excellent stereo-selectivity toward quinine.     

The development of a semiautomated procedure for the synthesis and screening of a large group of molecularly imprinted polymers

A method for synthesis and evaluation of molecularly imprinted polymers (MIPs) on a semiautomated miniature scale is reported. This technique combines molecular imprinting with the combinatorial chemistry approach, allowing rapid screening and optimizations of libraries of MIPs. The polymers were prepared and evaluated in situ by rebinding utilizing powder dispensing and liquid handling systems. MIPs were prepared by a combinatorial approach using methacrylic acid (MAA), 4-vinylpyridine (4-VP), acrylamide, and styrene as functional monomers, and acetonitrile and toluene as porogenic solvents. A drug substance having aromatic, hydroxyl, -O-CONH2 functional groups was selected as the template molecule for this study. The MIP library results demonstrated that the polymer prepared with MAA as functional monomer shows the strongest binding affinity, and therefore, is preferred for the preparation of this particular template molecule. Due to the low consumption of reagents, and more importantly, the demonstrated ability of this method to effectively identify optimal imprinting conditions, this small-scale combinatorial protocol is well suited for fast and efficient screening and optimizations of MIPs.     

Chromatographic characterization of molecularly imprinted polymers

Recent efforts in the investigation of chromatographic characterization of molecularly imprinted polymers (MIPs) have focused mainly on the nature of heterogeneous binding sites. More data on the thermodynamics than on the kinetic features of MIP columns have been published. The present article addresses the sources of peak broadening and tailing, which are the main drawbacks often associated with imprinted polymers in chromatography for practical applications. With use of the theory of nonlinear chromatography, the peak properties of a MIP column, including the retention and peak broadening and tailing, can be well interpreted. Efforts to improve chromatographic efficiency using MIPs prepared by approaches different from the conventional method, including covalent imprinting and the format of uniformly sized spherical microbeads, are reviewed and discussed. This review leads to the conclusion that nonlinear chromatography theory is useful for characterizing chromatographic features of MIP columns, since a MIP is essentially an affinity-based chromatographic stationary phase. We expect more theoretical and experimental studies on the kinetic aspects of MIP columns, especially the factors influencing the apparent rate constant, as well as the analysis of the influences of mobile-phase composition on the chromatographic performance. In addition to revealing the affinity interaction by molecular recognition, slow nonspecific interactions which may be inherited from the imperfect imprinting and may be involved in the rebinding of the template to MIPs also need to be characterized. Figure The peak broadening and tailing associated often with molecularly imprinted polymers (MIPs) in column chromatography for practical applications can be well characterized by the theory of nonlinear chromatography.     

Chromatographic evaluation of polymers imprinted with analogs of chloramphenicol and application to selective solid-phase extraction

To obtain a highly selective material for the antibiotic chloramphenicol, which has several harmful side effects in humans, different molecularly imprinted polymers (MIPs) were prepared. In order to avoid a major traditional drawback associated with MIPs of residual template bleeding, molecules that are structurally related to chloramphenicol were used as templates for polymer synthesis. Chromatographic evaluation indicated that the employed template imparted a significant influence on the recognition properties of the corresponding polymer. A strong retention of chloramphenicol under nonpolar elution conditions (k = 68.03, IF = 17.72) and under aqueous elution conditions (k = 92.44, IF = 1.35) was achieved. After chromatographic evaluation, the MIP was utilized as the recognition sorbent in a solid-phase extraction to determine chloramphenicol using either an organic or aqueous washing solvent. Recoveries of nearly 100% from the chloramphenicol standard solution and nearly 90% from honey samples spiked with chloramphenicol were attained. Furthermore, the applicability of the MIP for sample cleanup was demonstrated.     

Quercetin molecularly imprinted polymers: Preparation, recognition characteristics and properties as sorbent for solid-phase extraction

Molecular imprinted polymers (MIPs) were prepared through thermal polymerization by using quercetin as the template molecule, acrylamide (AA) as the functional monomer and ethylene glycol dimethacrylate (EDMA) as the cross-linker in the porogen of tetrahydrofuran (THF). The synthesized MIPs were identified by both Fourier transform infrared (FTIR) and scanning electron microscope (SEM). Systematic investigations of the influences of key synthetic conditions, including functional monomers, porogens and cross-linkers, on the recognition properties of the MIPs were conducted. Scatchard analysis revealed that the homogeneous binding sites were formed in the polymers. Besides quercetin, two structurally similar compounds of rutin and catechol were employed for molecular recognition specificity tests of MIPs. It was observed that the MIPs exhibited the highest selective rebinding to quercetin. Accordingly, the MIPs were used as a solid-phase extraction (SPE) sorbent for the extraction and enrichment of quercetin in cacumen platycladi samples, followed by HPLC-UV analysis. The application of MIPs with high affinity and excellent stereo-selectivity toward quercetin in SPE might offer a novel method for the enrichment and determination of flavonoid compounds in the natural products.     

Preparation of a molecularly imprinted polymer for the solid-phase extraction of scopolamine with hyoscyamine as a dummy template molecule

Molecularly imprinted polymers (MIPs) selective for scopolamine were produced using hyoscyamine (a close structural analogue) as template molecule. The produced polymers were used as media for solid-phase extraction, exhibiting selective binding properties for the analyte from biological samples. Human and calf urine and serum were processed on the MIP under various extraction protocols. The best performance was observed after loading the analyte in aqueous environment facilitating retention on the MIP by non-selective hydrophobic interactions. The MIPs were subsequently washed using an optimised solvent system to enable selective desorption of the analyte. Other related and non-related compounds were accessed to evaluate molecular recognition properties. Recoveries of up to 79% were achieved for the analyte of interest from biological samples.     

Target analogue imprinted polymers with affinity for folic acid and related compounds.

Two approaches to synthesize molecularly imprinted polymers with affinity for folic acid and other substituted pteridines have been compared. In the first approach, the folic acid analogue methotrexate was used as template and functional monomers capable of generating selective binding sites were searched in a miniaturized screening system based on binding assessment in the batch mode. Highest selectivity was seen using 2-vinylpyridine as functional monomer, which was confirmed in the chromatographic mode for a batch synthesized on a gram scale. However, the retentivity and selectivity of this phase were insufficient for anticipated applications. In a second approach, using methacrylic acid as the functional monomer, organic soluble inhibitors for the enzyme dihydrofolate reductase were used to develop sites complementary toward the pteridine substructure. This resulted in materials showing enhanced selectivity for substituted pteridines when evaluated by HPLC. Thus, methotrexate and leucovorine were selectively retained in mobile phases of either low or high aqueous content, thus showing the typical bimodal retention behavior of previously reported MIPs. In organic mobile-phase systems, the inhibitor used as template had an influence on the retentivity and selectivity of the MIP. The polymer imprinted with trimethoprim retained all folic acid analogues strongly and showed the highest selectivity among the MIPs in an organic mobile-phase system. This was supported by Scatchard analysis resulting in biphasic plots and a quantitative yield of high-energy binding sites. All templates were shown to associate strongly with MAA in CDCl(3), the strength of association correlating roughly with the template basicity and the selectivity observed in chromatography. Nonparallel complexation-induced shifts indicated formation of 1:2 template monomer complexes at concentrations corresponding to those of the prepolymerization solutions.     

Optimization of polymerization parameters for the sorption of oseltamivir onto molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) are tailor-made polymers with high selectivity for a given analyte, or group of structurally related compounds. The influence of the process parameters (the moles of functional monomer and cross-linker, the selection of functional monomer and solvent) on the preparation of oseltamivir (OS)-imprinted polymers was investigated. A mathematical method for uniform design to optimize these selected parameters and to increase the MIP selectivity for template molecules was applied. The optimal conditions to synthesize MIP were 0.69 mmol 30% acrylamide (AA) + 70% 4-Vinylpyridine (4-VP) and 5.0 mmol ethylene glycol dimethacrylate (EGDMA) copolymerized in 5 ml toluene in the presence of 0.1 mmol OS. MIP showed high affinity and selectivity for separation of the template molecule from other compounds. In the present study, we have established an effective LC-MS/MS method to identify and quantify OS with good sensitivity, accuracy and precision.     

Preparation and Evaluation of Molecularly Imprinted Monolithic Column for Felodipine in Micro-liquid Chromatography

This study concentrated on the production of molecularly imprinted polymers (MIPs) as highly selective sorbents for felodipine (FLD), a representive dihydropyridine calcium antagonists. Demonstrated chromatographically through a selection factor, these MIPs showed high selectivity for the template molecule among a group of structurally similar compounds. The recognition was found to correlate with structural similarity to the template compound.     

Water-compatible molecularly imprinted polymers obtained via high-throughput synthesis and experimental design

A technique allowing high-throughput synthesis and evaluation of molecularly imprinted polymer sorbents at a reduced scale (mini-MIPs) was developed and used for the optimization of MIPs for use in pure aqueous environments. The technique incorporated a 4-port liquid-handling robot for the rapid dispensing of monomers, templates, solvents and initiator into the reaction vessels of a 96-well plate. A library of 80 polymers, each ca. 50 mg, could thus be prepared in 24 h. The MIP rebinding capacity and selectivity could be rapidly assessed in the batch mode by quantifying nonbound fractions in parallel using a UV monochromator plate reader. This allowed a complete evaluation of the binding characteristics of an 80 polymer library in approximately 1 week. With the objective of optimizing a polymer imprinted with the local anaesthetic Bupivacaine for use in pure aqueous systems, a polymer library was prepared by varying the original poly(MAA-co-EDMA) MIP composition. The variable factors were the added amount of the hydrophilic comonomer, 2-hydroxyethyl methacrylate (HEMA), the cross-linking ratio, and the porogen. This optimization resulted in polymers showing high imprinting factors (IF = K(MIP)/K(NIP)) in water as a result, mainly, of reduced binding to the nonimprinted polymer. Normal scale batches of these materials showed strong retention of the template and low nonspecific binding when assessed as chromatographic stationary phases using pure phosphate buffer, pH 7.4, as mobile phase, by equilibrium batch rebinding experiments and as sorbents for extractions of the analyte from blood plasma samples.     

Synthesis of homoveratric acid-imprinted polymers and their evaluation as selective separation materials

A bulk polymerization method was used to easily and efficiently prepare homoveratric acid (3,4-dimethoxyphenylacetic acid)-imprinted polymers from eight basic monomers: 2-vinylpyridine, 4-vinylpyridine, 1-vinylimidazole, N-allylaniline, N-allylpiperazine, allylurea, allylthiourea, and allylamine, in the presence of homoveratric acid as a template in N,N-dimethylformamide as a porogen. The imprinted polymer prepared from allylamine had the highest affinity to the template, showing an imprinting factor of 3.43, and allylamine polymers MIP8/NIP8 were selected for further studies. Their binding properties were analyzed using the Scatchard method. The results showed that the imprinted polymers have two classes of heterogeneous binding sites characterized by two pairs of K(d), B(max) values: K(d)(1) = 0.060 μmol/mL, B(max)(1) = 0.093 μmol/mg for the higher affinity binding sites, and K(d)(2) = 0.455 μmol/mL, B(max)(2) = 0.248 μmol/mg for the lower affinity binding sites. Non-imprinted polymer has only one class of binding site, with K(d) = 0.417 μmol/mL and B(max) = 0.184 μmol/mg. A computational analysis of the energies of the prepolymerization complexes was in agreement with the experimental results. It showed that the selective binding interactions arose from cooperative three point interactions between the carboxylic acid and the two methoxy groups in the template and amino groups in the polymer cavities. Those results were confirmed by the recognition studies performed with the set of structurally related compounds. Allylamine polymer MIP8 had no affinity towards biogenic amines. The obtained imprinted polymer could be used for selective separation of homoveratric acid.     

Recent advancement of carbon nanomaterials engrained molecular imprinted polymer for environmental matrix

Sample preparation techniques have always been considered as a complex issue in the analytical process. Most of the sample preparation techniques show a lack of selectivity. Molecularly imprinted polymer (MIP) is a synthetic approach for sample preparation technique that has the ability of selective extractions. Generally, MIPs are selective sorbent, MIPs are capable of binding a molecule or its geometrical analogues. The imprinted polymers own particular voids exclusively framed for the aimed target analytes. These MIPs have been synthesized through a complex route of polymerization using a dedicated crosslinker, a template and function bound specific monomers (mainly interacting with the template). Despite having various pros like selectivity, morphological predictability, chemical & thermal stability, points alike binding site heterogeneity, partial template removal, and limited application pose a challenge. In this regard, a relatively newer carbon-based MIP method is explored as the molecular imprinting technique in various environmental samples. This paper describes the current scenario in the field of molecular-based imprinting technology using different carbon engrained materials and highlights the latest applications in this field and suggest proposals for the prospect in the area of the MIP.     

In situ preparation of powder and the sorption behaviors of molecularly imprinted polymers through the complexation between polymer ion of methyl methacrylate/acrylic acid and Ca ion

Molecularly imprinted polymer (MIP) powders were prepared using a simple complexation strategy between the polymer carboxylate groups and template molecule followed by metal cation cross-linking of residual polymer carboxylates. Polymer powders were formed in situ by templating carboxylic acid containing polymers with 4-ethylaniline (4-EA), followed by addition of an aqueous CaCl₂ solution. The solution remained homogeneous. The powders were prepared by precipitation by slowly adding a non-solvent, H₂O, to the mixture. The resulting particles were very porous with uptake capacity that approached the theoretical value. We suggest two types of complexes are formed between the template, 4-EA, and polymer. The isolated entry type forms well defined cavities for the template with high specific selectivity, while the adjacent entry type forms wider binding sites without specific sorption for isomeric molecules. To evaluate conditions for forming materials with high affinity and selectivity, three MIPs were prepared containing 0.5, 1.0, and 1.5 equivalents of template to the base polymer. The MIP containing 0.5 eq showed higher specific selectivity to 4-EA, but the MIP containing 1.5 eq had noticeably lower selectivity. The lower selectivity is attributed to poorly formed binding sites with little selective sorption to any isomer when the higher ratio of template was used. However at the lower ratio of template the isolated entry is preferably formed to produce well defined binding cavities with higher selectivity to template.