土壤中痕量水胺硫磷的微波辅助萃取-固相微萃取-GC-MS法测定

研究了微波辅助萃取(MAE)-固相微萃取(SPME)联合萃取、气相色谱-质谱法(GC-MS)测定土壤中水胺硫磷的分析方法；采用正交设计试验优化了微波升温程序、萃取温度、萃取时间、萃取溶剂体积等MAE条件；研究了SPME萃取涂层、萃取时间、解吸温度等对萃取效率的影响；方法的线性范围在1．O～20μg/L之间，检出限为O．49ng/g；测定25、100ng/g加标土壤样品，回收率分别为79％和107％。RSD分别为2．6％和6．5％；方法综合了MAE快速高效和SPME富集浓缩的优点，以水为萃取溶剂，特别适合于固体样品中痕量有机物的分析。     

微波辅助萃取气相色谱-质谱联用测定蔬菜中的扑草净

研究了微波辅助萃取气相色谱．质谱联用测定植物样品中扑草净的方法，比较了几种不同溶剂的微波萃取效率，从而选取二氯甲烷为萃取溶剂，并采用三因素三水平的正交设计试验对溶剂体积、微波辐射时间、微波功率进行了优化。在优化的实验条件下分析了合成菠菜样品，对0．2μg/g和0．02μg/g的合成菠菜样品，回收率分别为99．5％和92．5％，相对标准偏差分别为5．0％和ll％，方法的线性范围为1．0—400ng／g，检出限为0．22ng／g。方法适合于分析植物样品中的扑草净。     

顶空衍生固相微萃取-气相色谱质谱法测定聚碳酸酯树脂中的环境雌激素

建立了固相微萃取-气相色谱质谱联用测定聚碳酸酯树脂中环境雌激素4-枯基苯酚和双酚A的分析方法。优化了固相微萃取纤维、萃取温度和时间、解吸时间、搅拌速度、pH等萃取条件及衍生化温度和时间、衍生化方式等衍生化条件，并对样品浸泡时间、浸泡温度等进行了研究。方法的线性范围为0．05μg/L～1mg／L，4-枯基苯酚和双酚A的检出限分别为50ng／L和0．5ng／L，相对标准偏差（RSD，n=5）分别为5．2％和1．6％，平均回收率（n=3）在90．50％～107．3％之间，该方法简单、快速、灵敏。     

顶空固相微萃取-气相色谱-质谱联用分析纺织品中挥发性有机物

建立了顶空固相微萃取（HSSPME）-气相色谱（GC）-质谱（MS）联用测定纺织品中甲苯、4-乙烯基环己烯、苯乙烯、萘和1-苯基环己烯5种挥发性有机物（VOCs）的分析方法。选择聚二甲基硅氧烷（PDMS）作为萃取涂层,优化了SPME的萃取条件,包括平衡时间、萃取时间、萃取温度、顶空体积、离子强度、搅拌速度、解吸温度和时间以及GC—MS仪器条件。对于甲苯、4-乙烯基环己烯、苯乙烯、萘和1-苯基环己烯方法线性范围分别为0．087～870、3．32～3320、2．28～2280、0．015～150和0．050～50．0ng／g;检出限分别为0．005、0．042、0．670、0．008和0．011ng／g。实际样品加标回收率在80．1％～122％之间,RSD在0．8％～8．6％之间。方法符合纺织品中痕量VOCs的快速分析要求。     

固相微萃取-气相色谱-质谱联用分析水中的痕量扑草净

研究了固相微萃取－气相色谱－质谱联用测定水中扑草净的方法，采用聚丙烯酸酯（PA）萃取头，对影响固相微萃取萃取效率的萃取时间、搅拌速度、pH值以及盐度等进行了优化。在优化实验条件下，方法线性范围在0．1mg/mL-1000ng/mL之间，检出限为1．5ng/L。用该法分析了合成井水、自来水和湖水样品，回收率在85．4％－89．1％之间，相对标准偏差在1．8％－5．2％之间。本方法适合于水中痕量扑草净的分析。     

固相微萃取-原子荧光测定鱼样品中痕量甲基汞

研制了一种用HF处理石英纤维表面的萃取纤维和一次性微量注射器组成的固相微萃取装置,研究了用甲基聚硅氧烷作为萃取头涂层对氢化甲基汞的萃取,得到的最佳条件是：在室温条件下,缓冲液的pH值为5、萃取时间为lh、NaCl的用量为2g、洗脱时间为50min、KBH4质量浓度为60g／L。在上述优化条件下,甲基汞的萃取率可以达到70％,检出限为0.17ng。测定了鱼样品中甲基汞,所测鱼虾中甲基汞的质量分数为12．4～53．4ng／g,加标回收率为87．6％～112．8％。     

固相微萃取-脉冲火焰光度法测定大气及水中的路易氏剂

建立了固相微萃取（SPME）与气相色谱/脉冲火焰光度检测器（GC／PFPD）联用测定大气和水中路易氏剂及其水解产物的方法。探讨了影响SPME萃取效率的萃取头类型、萃取时间、解吸时间等因素。优化了PFPD的条件参数、衍生化试剂及衍生条件。在优化的条件下，路易氏剂衍生产物的响应值与浓度有良好的线性关系。本方法对水中路易氏剂及其水解产物的检出限为0．1μg/L；气体中路易氏剂的检出限为10ng／m^3；水样的加标回收率为96．7％-102．1％；气体样品的加标回收率为94．9％-103．0％；RSD为2．06％。     

茶叶中三氯杀螨醇残留量的微波萃取-固相微萃取-气相色谱快速检测方法

建立了微波辅助萃取-固相微萃取-气相色谱/电子捕获检测法快速测定茶叶中三氯杀螨醇的方法。采用自制的PDMS萃取头,优化了萃取溶剂的种类,微波辐射时间和微波功率等微波辅助萃取条件;研究了SPME萃取时间、搅拌速度、离子强度、解吸温度和解吸时间对萃取效率的影响。方法对三氯杀螨醇的检出限为0.048 ng/mL,线性范围为0.2~200 ng/mL。在优化的实验条件下,对乌龙茶进行添加回收试验,平均回收率为61.3%~72.8%,相对标准偏差为8.0%~16.3%。本方法适合于茶叶中痕量三氯杀螨醇快速检测。     

微波辅助-顶空液相微萃取/高效液相色谱分析水样中的邻硝基苯酚

建立了基于微波辅助-顶空液相微萃取在线联用、高效液相色谱法测定水样中邻硝基苯酚的分析方法。采用L16(45)正交实验设计对影响萃取的各种因素,如萃取有机溶剂、微波辐射功率、萃取时间、离子强度、样品液体积,进行了优化。优化后萃取条件为,以乙酸丁酯作为萃取溶剂,功率和时间分别为100W和12min条件下,离子强度为0的样品溶液体积为20mL。在优化萃取条件下,邻硝基苯酚的检出限LOD(S/N=3)为0.94μg/L,萃取富集倍数为30,实际水样的加标回收率为85.2%。理论分析和实验结果表明,微波辅助-顶空液相微萃取在线联用方法具有简便、快速、高效、节省溶剂、选择性好、应用范围广的特点。     

用C16-MCM-41介孔涂层新型固相微萃取-高效液相色谱分析环境水样中的痕量蒽

首次建立了1种用C16-MCM-41介孔复合材料作纤维涂层的固相微萃取(SPME)与高效液相色谱(HPLC)联用,测定环境水样中痕量葸的方法;对SPME的实验条件,如萃取和解吸时间、萃取温度、搅拌速度以及离子强度等进行了优化;方法的线性范围为0．018—71．2μg.L^-^1,检出限为5．9ng.L^-^1(S／N=3),相对标准偏差为0．033％(RSD,n=7);该法体现了SPME在样品前处理过程中的快速、灵敏、简单和无溶剂的特点。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.