Synthesis and characterization of polyhedral Pt nanoparticles: their catalytic property, surface attachment, self-aggregation and assembly

In this paper, we presented the preparation procedure of Pt nanoparticles with the well-controlled polyhedral morphology and size by a modified polyol method using AgNO(3) in accordance with the reduction of H(2)PtCl(6) in EG at high temperature around 160°C. The methods of UV-vis spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), and high resolution (HR) TEM measurements were used to characterize their surface morphology, size, and crystal structure. We have observed that the polyhedral Pt nanoparticles of sharp edges and corners were produced in the preferential homogenous growth as well as the formation of porous and large Pt particles by self-aggregation and assembly originating from as-prepared polyhedral Pt nanoparticles. It is most impressive to find that the arrangement of Pt nanoparticles was observed in their surface attachments, self-aggregation, random and directed surface self-assembly by the bottom-up approach. Their high electrocatalytic activity for methanol oxidation was predicted. The findings and results showed that the polyhedral Pt nanoparticle-based catalysts exhibited the high electrocatalytic activity for their potential applications in developing the efficient Pt-based catalysts for direct methanol fuel cells.     

Effects of Halogen Bonding in Chemical Activity of Lead(II) Electron Pair: Sonochemical Synthesis,Structural Studies,and Thermal Analysis of Novel Lead(II) Nano Coordination Polymer

The nanoflower lead(II) coordination compound {[Pb(phen)(μ‐CH₃COO)][PF₆]}_n ( 1 ) (phen = 1,10‐phenanthroline) was synthesized by a sonochemical method. The nanostructure was characterized by using scanning electron microscopy (SEM), X‐ray powder diffraction, elemental analysis, and thermal analysis. The single‐crystal X‐ray structure shows that the overall structure of 1 is a 1D coordination polymer. Complex 1 has a bridging acetate pathway. Three halogen bonds observed in the structure and the strong halogen bonding of F–Pb causes chemical activity of the lead electron pair. This is further extended into a 3D supramolecular structure by weak π–π intermolecular interactions. The coordination number of the lead(II) ions is six, resulting in PbN₂O₄. PbO nanoparticles were obtained by the thermolysis of 1 at 180 °C with oleic acid as a surfactant. The morphology and size of the prepared PbO nanoparticles were further observed using scanning electron (SEM) and transmission electron microscopy (TEM), and were analyzed by X‐ray photoelectron spectroscopy (XPS).     

Supercritical preparation of hexagonal gamma-alumina nanosheets and its electrocatalytic properties

Alumina precursors were prepared via a sol-gel process by refluxing aqueous solutions containing urea and 0.4 M Al3+ (the [urea]/[Al3+] ratio was 3.0). The obtained precursor precipitates were dried in supercritical ethanol. The resultant gamma-alumina nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), field emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectrometry (FTIR). Hexagonal sheet gamma-alumina (gamma-Al2O3) nanoparticles with a diameter of 8.48 nm were successfully prepared. The electrocatalytic properties of the nano-gamma-alumina/carbon paste electrode for oxidation of alizarin in 1.0 M H2SO4 solution have been investigated by cyclic voltammetry (CV), and excellent electrocatalytic activity was observed.     

聚-3,4-乙烯二氧噻吩导电聚合物纳米粒子的制备及性能

采用反向胶束合成法, 以二乙基磺基琥珀酸钠(AOT)形成的反胶束为模板制备了导电聚合物聚-3,4-乙烯二氧噻吩(PEDOT)纳米粒子. 用紫外-可见-近红外光谱、红外光谱、X射线光电子能谱、扫描电子显微镜及透射电镜等手段对PEDOT粒子进行了表征. 研究了纳米粒子的导电性能并采用石英微天平(QCM)对纳米粒子的气敏特性进行了分析, 对相应导电机理及气体敏感机理进行了讨论.     

溶剂热法制备银纳米晶

以聚乙烯吡咯烷酮(PVP)作为表面活性剂,利用乙二醇溶剂热法成功制备了银纳米颗粒;利用场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)、X射线衍射(XRD)分析了样品的形貌和晶体结构,并考察了溶剂组成等因素对银纳米颗粒形貌的影响.研究结果表明所得银纳米晶粒径均一,直径约为90nm;增大PVP的加入量会降低产物的粒径,溶剂中水的引入会影响银纳米晶的形貌.     

Poly(3-hexylthiophene)/gold nanoparticle nanocomposites: relationship between morphology and electrical conductivity

The morphology and electrical properties of gold nanoparticles (AuNP) layer vacuum-deposited onto spin-cast thin films of poly(3-hexylthiophene), P3HT, were studied. The electrical conductivity was measured during temperature cycling and related to the morphology of the same composite structures, which was monitored by transmission electron microscopy (TEM) and extra-high resolution scanning electron microscopy (XHR SEM). Comparison to the analogous polystyrene/AuNP layers was made to distinguish the role of the polymer support on the morphology and electrical properties of the nanoparticles assembly. Gold deposited in a very thin layer formed a nanoparticles-like island structure with the morphology depending on the effective thickness of the deposited layer and on its subsequent thermal treatment. A stabilizing effect of the thiophene–gold interaction on the nanoparticles morphology was observed.     

Highly efficient removal of Cr(VI) from wastewater via adsorption with novel magnetic Fe3O4@C@MgAl-layered double-hydroxide

Novel magnetic Fe₃O₄@C@MgAl-layered double-hydroxide (LDH) nanoparticles have been successfully prepared by the chemical self-assembly methods. The properties of surface functional groups, crystal structure, magnetism and surface morphology of magnetic nanoparticles were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermal gravity-differential thermal gravity (TG-DTG), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The adsorption studies of the novel adsorbent in removing heavy metals Cr (VI) from waste water showed that the maximum absorption amount of Cr(VI) was 152.0 mg/g at 40℃ and pH 6.0. The excellent adsorption capacity of the Fe₃O₄@C@MgAl-LDH nano-absorbents plus their easy separation, environmentally friendly composition and reusability makes them more suitable adsorbents for the removal of metal ions from waste water.     

Influence of Capping Ligands on the Self—organization of Gold Nanoparticles into Superlattices from CTAB Reverse Micelles

Gold nanoparticles with size 3-10nm (diameter) were prepared by the reduction of HAuCl4 in a CTAB/octane 1-butanol/H2O reverse micelle system using NaBH4 as the reducing agent.The as-formed gold nanoparticle colloid was characterized by UV/vis absorption spectrum and transmission electron microscopy(TEM).Various capping ligands,such as alkylthiols with different chain length and shape,trioctylphosphine(TOP),and pyridine are used to passivate the gold nanoparticles for the purpose of self-organization into superstructures.It is shown that the ligands have a great influence on the selforganization of gold nanoparticles into superlattices,and dodecanethiol C12H25SH is confirmed to be the best ligand for the self-organization.Self-organization of C12H25SH-capped gold nanoparticles into 1D,2D and 3D supperlattices has been observed on the carbon-coated copper grid by TEM without using any selective precipitation process.     

微波热解法制备Cu/Cu2O纳米材料

在二乙二醇溶剂体系中利用微波介电加热分解醋酸铜前体,进一步还原得到Cu2O和Cu纳米粒子以及Cu/Cu2O核壳结构。 采用X射线衍射、透射电子显微镜、扫描电子显微镜和紫外吸收光谱测试技术对产物的形貌、结构和组成进行了研究,结果表明,得到的Cu/Cu2O核壳结构直径为500 nm左右。 对比实验研究了不同聚合度乙二醇系列溶剂、反应时间以及表面活性剂或配位剂对产物形貌、组成的影响,表明低聚合度乙二醇和长的反应时间有利于醋酸铜还原形成铜。     

荧光光谱法研究纳米硫化锌与牛血清白蛋白的相互作用

采用水相法合成了ZnS纳米颗粒,通过XRD及TEM技术对纳米ZnS进行了表征,结果表明纳米ZnS的粒径约为7～8 nm.利用荧光光谱考察了纳米ZnS与牛血清白蛋白(BSA)的相互作用,结果显示,两者的相互作用可导致BSA内源荧光猝灭,推测其猝灭机理为静态猝灭,结合常数Ka=1.73×105 L·mol-1,结合位点数n...     

碳纳米管负载金属Pt催化剂的制备和机理研究

本文报道了高温裂解法沉积铂纳米颗粒于碳纳米管壁的新方法。利用红外光谱技术考察了碳纳米管壁的官能团衍生化以及这些官能团与铂颗粒沉积间的关系。利用透射电镜(TEM)、X-射线粉末衍射(XRD)以及光电子能谱技术(XPS)对碳纳米管壁上负载的铂纳米颗粒进行了表征。结果表明，大小约为5 nm的铂纳米颗粒以金属Pt(0)的形式均匀分散在纳米管表面，主要晶面定向为(111)面。同时，考察了甲醇在碳纳米管负载铂纳米颗粒复合材料电极上的电催化氧化。     

含萘（2,6）生色基的合成双分子膜研究

本文首次了报道系列单链、2,6-取代萘刚性生色基的双亲化合物C_nNaph(2,6)C_4N~+(CH_3)_3(n=16,12,7,4),C_(12)Naph(2,6)PO_4~-和C_(12)Naph(2,6)C_4N~+(CH_3)_2CH_2CH_2OH的合成。分别用AEM、~1HNMR和DSC考察了该系列化合物在稀水溶液中的自组织行为、聚集体内分子运动和物相变化。当n≥7时,该系列双亲化合物在稀水溶液中可自组织形成双分子层结构,亲水基团的种类直接影响双亲分子的自组织形态。     

Effect of annealing on photoluminescence of blue-emitting ZnO nanoparticles by sol–gel method

In this work, we investigated the influence of annealing on the crystallinity, microstructures, and photoluminescence (PL) properties of ZnO nanoparticles prepared by sol–gel method. The annealing was carried out both in air and vacuum. X-ray powder diffraction, scanning electron microscopy, and ultraviolet–visible spectroscopy were used to characterize the crystal structures, diameter, surface morphology, and PL properties of ZnO nanoparticles. It has been found that both the as-grown and annealed ZnO nanoparticles had a hexagonal wurtzite crystal structure, and their average diameter and crystallinity increased with the anneal time and temperature. Pure blue-emitting behavior was observed in all samples. The emission intensity of ZnO nanoparticles was found to be enhanced after annealing, but it was highly dependent on the annealing conditions. Optimal annealing conditions both in air and vacuum were obtained for achieving maximum emission intensity in the ZnO nanoparticles. The dependence of PL properties of the ZnO nanoparticles on the annealing conditions was discussed.     

高催化活性Pd-Co3O4/MWCNTs催化剂对甲醇氧化的电催化性能

以Co(NO3)3·6H2O为钴源,聚乙二醇(PEG)20000为表面活性剂,与多壁碳纳米管(MWCNTs)混合后通过水热氧化法成功地合成了表面均匀分布纳米絮状Co3O4的MWCNTs复合物,进一步还原Pd的前驱体而制备得到Pd-Co3O4/MWCNTs复合催化剂.利用扫描电镜(SEM)、透射电镜(TEM)及X射线粉末衍射(XRD)等手段对样品的形貌和晶型结构进行了表征,结果表明Pd纳米粒子为面心立方晶体结构,均匀地分布在Co3O4修饰的MWCNTs表面.用循环伏安法和计时电流法表征结果表明:催化剂Pd-Co3O4/MWCNTs具有较大的电化学活性表面积,在碱性介质中对甲醇氧化具有更高的电催化活性和稳定性.研究结果表明,过渡金属氧化物纳米Co3O4颗粒在提高直接甲醇燃料电池(DMFC)催化性能研究中具有十分重要的作用,是一类很有潜力的载体催化剂.     

Layer-by-layer assembly of TiO(2) colloids onto diatomite to build hierarchical porous materials

TiO(2) colloids with the most probably particle size of 10 nm were deposited on the surface of macroporous diatomite by a layer-by-layer (LBL) assembly method with using phytic acid as molecular binder. For preparation of colloidal TiO(2), titanium(IV) isopropoxide (Ti(C(3)H(7)O)(4)) was used as titanium precursor, nitric acid (HNO(3)) as peptizing agent and deionized water and isopropanol (C(3)H(7)OH) as solvent. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), N(2) adsorption-desorption, and UV-vis spectra are used to assess the morphology and physical chemistry properties of the resulting TiO(2) coated diatomite. It was shown that the mesoporosity has been introduced into macroporous diatomite by LBL deposition. The mesoporosity was originated from close-packing of the uniform TiO(2) nanoparticles. More TiO(2) could be coated on the surface of diatomite by increasing the deposition cycles. This hierarchical porous material has potential for applications in catalytic reactions involved diffusion limit, especially in photocatalytic reactions.     

Tetraethylenepentamine-directed controllable synthesis of wurtzite ZnSe nanostructures with tunable morphology

A novel tetraethylenepentamine (TEPA)-directed method has been successfully developed for the controlled synthesis of ZnSe particles with distinctive morphologies, including nanobelts, nanowires, and hierarchically solid/hollow spheres. These structures, self-assembled from nanobelts and nanorods, have been synthesized by adjusting the reaction parameters, such as the solvent composition, reaction temperature, and the aging time. Results reveal that the volume ratio of H2O and TEPA plays a crucial role in the final morphology of ZnSe products. The mechanisms of phase formation and morphology control of ZnSe particles are proposed and discussed in detail. The products have been characterized by means of X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy (TEM), selected area electron diffraction, high-resolution TEM, Raman spectra and luminescence spectroscopy. The as-prepared ZnSe nanoparticles display shape- and size-dependent photoluminescent optical properties. This is the first time to report preparation of complex hollow structures of ZnSe crystals with hierarchy through a simple solution-based route. This synthetic route is designed to exploit a new H2O/TEPA/N2H4H2O system possibly for the preparation of other semiconductor nanomaterials.     

微乳液中单分散银纳米颗粒的制备及抗磨性能

采用水/液体石蜡/Span 80-Tween 80/正丁醇微乳液体系, 制备了具有良好单分散性的Ag纳米颗粒. 通过X射线粉末衍射仪、透射电子显微镜、傅立叶变换红外光谱仪和热分析仪表征了Ag纳米颗粒的结构、形貌、粒径大小及分布、表面键合性质和热性能. 结果表明, 所制备的Ag纳米颗粒具有立方晶型结构, m(Span 80)∶m(Tween 80)=7∶3时, 粒径分布呈单分散性, 平均粒径约为6 nm. 在四球长时抗磨损试验机上考察了分散于液体石蜡中Ag纳米颗粒的抗磨性能. 实验结果表明, Ag纳米颗粒具有良好的抗磨性, 且能显著提高基础油的承载能力.     

微乳液合成胶体CuO/γ-Al2O3及其催化芳香硝基化合物还原（英文）

Monodispersed colloidal copper oxide nanoparticles were synthesized by water-in-oil microemulsion using CuCl 2·H2O and NaOH.The effect on CuO particle size was studied by varying the water-to-surfactant molar ratio,precursor concentration and molar ratio of NaOH to CuCl2.The morphology,size and size distribution of the particles were studied by transmission electron microscopy and dynamic light scattering.Dispersion destabilization of the colloidal copper oxide nanoparticles was detected by a Turbiscan apparatus.CuO/γ-Al2O3 catalysts were prepared by dispersing highly stable CuO nanoparticles on γ-alumina by mechanical stirring.The catalysts were analyzed by scanning electron microscopy,transmission electron microscopy,X-ray photoelectron,and X-ray diffraction,which confirmed the uniform dispersion of CuO on the support.The reduction of the nitro aromatic compounds,4-nitrophenol,3-nitrophenol,and 2-nitrophenol,were studied.The CuO/γ-Al2O3 catalysts were active for the reduction of these nitro aromatic compounds.     

Synthesis of Nickel Sulfide Particles by Solvothermal Process

Pyrite nickel disulfide and millerite nickel monosulfide have been successfully prepared by solvothermal method based on the reaction of Ni(NO3)26H2O and H2NC(S)NH2 in benzene and ethylenediamine (EDA). The final products were characterized by X-ray powder diffraction(XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM). The effects of the solvent, reaction temperature and time on the morphology and phase of the products have been discussed.     

Preparation of dendritic nanostructures of silver and their characterization for electroreduction

Silver nanostructures of different morphologies including well-defined dendrites were synthesized on an Au substrate by a simple surfactant-free method without using any template. The morphology of the material was investigated by field-emission transmission electron microscopy and scanning electron microscopy. The crystal nature of the dendritic nanostructure was revealed from their X-ray diffraction and electron diffraction patterns. Effects of applied potential, electrolysis time, and the solution concentration were studied. The possible formation mechanism of the dendritic morphology was discussed from the aspects of kinetics and thermodynamics based on the experiment results. The H(2)O(2) electroreduction ability of the dendritic materials was characterized. Use of silver dendrite-modified electrode as H(2)O(2) sensor was also demonstrated.