双炔酸多层LB膜的光敏聚合研究

选用(口恶)花菁染料为光敏剂,将其镶嵌到双炔酸LB膜中,利用Ar~+离子激光514.5 nm照射LB膜,观察到双炔酸LB膜的光敏聚合及(口恶)花菁染料荧光的猝灭,对其光敏聚合机理进行了讨论。     

10,12—双炔廿三酸盐的LB膜特性研究

本文合成了10,12-双炔廿三酸,并用其在Si、SiO_2、CaF_2等基片上沉积了LB膜,结果表明,10,12-双炔廿三酸的镉盐成膜更稳定。这种LB膜在紫外光辐照下很快聚合,聚合前后的紫外-可见吸收光谱发生规律性的变化,并保持层状结构,等同周期稍变。通过红外吸收的二向色性分析,确定了该分子的取向。     

柔性间隔基对于香豆素取代二乙炔LB膜聚合及手性形成的影响

设计合成了2种香豆素取代二乙炔单体,7-(10,12-二十三双炔酰氧基)-香豆素(CODA)和7-(10,12-二十三双炔酰氧乙氧基)-香豆素(CO2DA),研究了柔性间隔基对香豆素取代二乙炔单体在气-液界面的组装、单体LB膜的聚合以及聚二乙炔主链螺旋结构形成的影响.利用Langmui-Blodgett(LB)技术,以纯水为亚相,膜压在35 mN/m时沉积制备了香豆素取代二乙炔单体LB膜.尽管CODA是非手性的,但其LB膜均表现出明显的宏观手性信号.这是由于在压缩过程中香豆素基团间强烈的π-π堆积,形成了螺旋排列,显示出超分子手性.而CO2DA LB膜无明显CD信号.经254 nm紫外光辐照,CODA LB膜聚合成蓝相,聚二乙炔主链表现出明显的宏观手性.而CO2DA LB膜聚合后无明显的CD信号.薄膜中香豆素功能基团的不规则排列不利于二乙炔单体的固态聚合以及聚二乙炔主链螺旋结构的形成.     

手性聚二炔组装体*

本文介绍了手性聚双炔制备的研究进展,重点介绍从非手性的含有光活性基团的偶氮双炔单体小分子出发,采用一种全新的技术即手性圆偏振紫外光辐照聚合技术,制备偶氮聚双炔手性Langmuir–Blodgett（LB）膜,研究了偶氮聚双炔手性LB膜在光致旋光性调控过程中的光学和其它物理性质变化,并展望其在光子学器件领域中的应用。     

LB技术制备双(对甲苯磺酸)-2,4-己二炔-1,6-二醇酯及其聚合物的沉积薄膜

<正> LB(Langmuir-Blodgett)技术是人为排列分子的一项技术。由LB技术制备的LB膜高度规整又极薄,有望在微电子学(分子电子器件)和集成光学(非线性光学器件)等高技术领域中得到应用。本文利用LB技术制备了端头不具备亲水基团的双(对甲苯磺酸)-2,4-己二炔-1,6-二醇酯(TS)的沉积薄膜,用X-射线衍射研究了TS及其聚合物PTS沉积薄膜的分子排列情况。     

10,12-双炔甘三酸镉盐LB膜的FT-IR光谱

近年来,由于LB膜在功能器件中(如光电子器件,微型电池、低维半导体、热释电探测器等)显示出了令人兴奋的应用前景,因此有越来越多的人致力于LB膜的研究工作.其中对LB膜的成膜质量的评价,特别是LB膜的分子取向问题,是一个非常引人关注的问题.此外,对于碳原子数大于20,熔点小于45℃的系列双炔酸(R—C≡C—C≡C—R′)可以利用LB技术制备多层膜.这类LB膜在紫外光或电子束的作用下可以迅速发生聚合.利     

8,10-二炔廿五碳酸LB膜的周期结构

合成了8,10-二炔廿五碳酸,在玻璃片、石英片和镀金片上沉积了它的LB膜,X-射线衍射研究了LB膜的周期结构和聚合对它的影响。在2θ=1°—15°范围内观察到了多达7个布拉格衍射峰。由此计算了等同周期和分子在基片上的倾斜角。用分子模型计算了衍射峰强度,得到了与实验结果相符合的衍射峰强度奇偶起伏现象。     

TS单晶体及其聚合物PTS的介电和动态力学行为

<正> 聚丁二炔类宏观单晶体以其极大的尺寸,完整性和立体规整的共轭主链,为我们提供了一个准一维体系模型化合物。它们的电性能,非线性光学性能及形成聚合LB膜的能力等具有潜在的应用前景,近年来研究工作非常活跃。丁二炔类化合物中最能培养咸大晶体,从而研究得最多的是双(对甲苯磺酸)-2,4-己二炔-1,6-二醇酯(TS)及其聚合物PTS。我们先后测量过它们的热电势率、电导、膨胀系数、介电性能、光声效     

一个对称萘酞菁的LB膜及其二阶非线性光学性质的研究

用水平提拉法制备了四叔丁基萘酞菁锌的LB膜。利用表面压-面积曲线、紫外-可见吸收光谱、小角X-射线衍射等表征了LB膜的结构,结果表明该化合物可以形成较高质量的具有很好层状结构的多层LB膜,在膜中分子大环平面垂直于基片平面并且以分子平面并不完全重合的H-聚集体存在。采用透射SHG方法测量了相应LB膜的二阶非线性光学性质,结果显示在实验条件下该化合物LB膜的宏观二阶非线性系数以及分子超极化率分别为X     

倒浮萍聚合物ES-3LB膜掠角反射-吸收红外光谱的研究

用傅里叶变换红外掠角反射-吸收光谱技术对ES-3LB膜的取向和相变行为进行了详细的研究.结果表明,在金表面上制备的ES-3LB膜中烷基链基本垂直于基面.相转变行为的研究表明,ES-3LB膜有3个相变点,分别在65,105和140℃.第一个相变过程表现为LB膜从一种有序状态到另一种有序状态的转变;第二个相变过程表现为LB膜中烷基链的有序-无序转变;第三个相变过程是LB膜的层状结构坍塌转变为各向同性熔融体的过程.     

Synthesis and natural distribution of anti-inflammatory alkamides from Echinacea

The synthesis of the alkamides 2Z,4E-undeca-2,4-dien-8,10-diynoic acid isobutyl amide (1) and 2Z,4E-undeca-2,4-dien-8,10-diynoic acid isobutyl amide (5) was accomplished by organometallic coupling followed by introduction of the doubly unsaturated amide moiety. The distribution of these two amides in accessions of the nine species of Echinacea was determined.     

High performance liquid chromatography/electrospray ionization mass spectrometry for simultaneous analysis of alkamides and caffeic acid derivatives from Echinacea purpurea extracts

Extracts of the plant Echinacea purpurea are widely used for medicinal purposes. Effective quality control of these extracts requires rapid methods to determine their chemical composition. A new method for analysis of caffeic acid derivatives and alkamides from Echinacea extracts has been developed. With this method, isomeric isobutylamides and 2-methylbutylamides can be distinguished, a capability that previously published methods have lacked. Quantitative analyses carried out with this method on E. purpurea extracts that have been stored for 18 months indicate that they contain caftaric acid, cichoric acid, and undeca-2Z,4E-diene-8,10-diynoic acid isobutylamide at concentrations of 0.7, 0.71 and 2.0mg/mL, respectively.     

Synthesis and Structure of PEDOT Prepared through a Modified LB Film Method

Adopting LB film method, an arachidic acid (AA)/PEDOT multilayer LB film and polymerized EDOT monomers in hydrophilic group of LB were chosen to prepare the arachidic acid (AA)/PEDOT multilayer LB film. UV-Vis, FT-IR and XPS analyses implied that EDOT was effectively polymerized in film, and thus PEDOT conducting polymer was produced. Analyses of XRR and SIMS indicated that the film had a well-arranged lamella structure, and further research showed that polymerization of EDOT in AA film destroyed the orderliness of the original LB film. This phenomenon could be related to the destructive effect of polymerization on the layered structure. We used four-point probe and semiconductor instrument to study the conductivity property of the film, and observed that the conductivity of AA/PEDOT film had sudden changes with the changes of processing time in an effective conduction network, which was caused by "permeability" in conducting channel of multilayer film. The test results also indicated that the conductivity of AA/PEDOT film was obviously better than that of spin-coating PEDOT/PSS or ODA-SA/PEDOT-PSS film due to the higher π structure of PEDOT structure and ordered film structure.     

Polymer-surfactant layered heterostructures by electropolymerization of phenosafranine in Langmuir-Blodgett films

Langmuir-Blodgett (LB) films of the water-soluble dye phenosafranine (PS) have been prepared by its adsorption from aqueous dye solution to an arachidic acid (AA) monolayer at the air-water interface. Atomic force microscopy (AFM) images of the LB films revealed the effect of change in pH of deposition on the degree of complexation of AA with the PS dye. Well-defined circular islands and holes were observed which disappeared with the increase in pH. Polarized absorption studies indicated that the dye molecules are oriented uniaxially with their long axis titled at a constant angle to the surface normal of the LB film. Within the restricted geometry of the LB film, the PS dye was electropolymerized to form a two-dimensional film of poly(phenosafranine) sandwiched between arachidic acid layers. The film was characterized by IR spectroscopy, cyclic voltammetry, and AFM. X-ray diffraction studies reveal the presence of a layer structure in the AA-PS LB film before and after polymerization. The polymer film showed highly anisotropic electrical conductivity of ca. 10 orders of magnitude. This indicates the formation of two-dimensional polyPS layers between arachidic acid layers resulting in a layered heterostructure film having alternate conducting and insulating regions. Also, the conductivity of the polyPS prepared from LB film was found to be approximately 2.5 times higher than the conductivity of polyPS prepared by solution polymerization method.     

Study on Conductivity Properties of PEDOT Prepared through a Modified LB Film Method

Adopting LB film method, an arachidic acid (AA)/PEDOT multilayer LB film was chosen, and polymerized EDOT monomers in hydrophilic group of LB to prepare arachidic acid (AA)/PEDOT multilayer LB film. UV‐Vis, FT‐IR and XPS analyses implied that EDOT was effectively polymerized in film, and thus PEDOT conducting polymer was produced. Analyses of XRR and SIMS indicated that film had a well‐arranged lamella structure, and further research showed that polymerization of EDOT in AA film destroyed the orderliness of the original LB film. This phenomenon could be related to the destructive effect of polymerization on layered structure. We used four‐point probe and semiconductor instrument to study the conductivity property of the film, and observed that the conductivity of AA/PEDOT film had sudden changes with the processing time of changes in effective conduction network. That was caused by "permeability" in conducting channel of multilayer film. The test results also indicated that the conductivity of AA/PEDOT film was obviously better than that of spin‐coating PEDOT/PSS film or that of ODA‐SA/PEDOT‐PSS film, which was due to the higher π structure of PEDOT structure and ordered film structure.     

聚合物Langmuir—Blodgett膜研究进展

聚合物LB膜可用两种方法制备,一种是两亲单体成膜再进行聚合反应,另一种为直接从两亲聚合物在亚相表面铺展成膜并转移。本文综合聚合物LB膜的研究状况,包括两亲聚合物和非两亲聚合物,对聚合物LB膜的成膜特点,结构和性能作了描述,并简要介绍了聚合物LB膜的应用前景。     

Surface effects on phase transition behavior and thermal polymerization of long-chain diynoic acids in micro DSC measurements

Effects of metal surfaces, such as aluminium, silver and gold, on the melting behavior and thermal polymerization of long-chain diynoic acids having a diacetylene group at different positions were investigated by thermal analyses using DSC, TG and other methods. The surface effects of metals were significant in the order of Ag, Al and Au. These effects are attributable to the anchoring of carboxyl group on the surface by chemisorption, which leads to unfavorable condition for polymerization of heptadeca-2,4-diynoic acid. In the case of tricosa-10,12-diynoic acid, containing a flexible methylene chain, inserted between COOH and C≡C?C≡C groups, the anchoring of COOH on the metal surface causes rather favorable effect on the polymerization.     

导电聚合物超薄膜的制备及性能表征

采用修饰LB膜法制备了导电聚合物聚-3,4-乙烯二氧噻吩/硬脂酸(PEDOT/SA)复合超薄膜. 将硬脂酸(SA)/FeCl3 LB膜暴露于EDOT单体气氛中, EDOT 单体在多层膜中聚合, 制备了PEDOT/SA多层复合LB膜. 紫外-可见光-近红外(UV-Vis-NIR)吸收光谱和X射线光电子能谱(XPS)分析表明EDOT单体在多层膜中发生聚合并生成PEDOT导电聚合物. 扫描电子显微镜(SEM)分析显示生成的PEDOT导电聚合物颗粒分散于硬脂酸LB膜中, 被LB 膜所包裹. 二次离子质谱(SIMS)及XPS分析还发现S元素含量随LB 膜的深度变化而变化, 表明PEDOT 较好地分散于多层膜中. 采用四探针电导率仪对复合多层膜的电导率进行了测试, 结果显示60 层复合LB 膜的电导率为2.6 S·cm-1, 比普通PEDOT薄膜的电导率高一个数量级, 且表现出较好的掺杂/脱掺杂能力. 研究还发现复合膜电导率与薄膜在EDOT 单体中处理时间有关, 处理时间至120 min 后电导率达到最大值并趋于稳定, 氧化剂浓度较低可能影响EDOT在LB膜中的聚合反应速率. 对复合LB 膜的气敏特性进行了分析, 发现在较低气体浓度范围(φ<30×10^-6), PEDOT 复合LB 膜有较快的反应速率, 气敏性与气体浓度呈非线性. 在较高浓度范围(φ=(30-120)×10^-6), 气敏性与浓度呈较好的线性关系. PEDOT复合LB膜对HCl气体表现出较好的响应恢复特性. 同时对PEDOT 复合膜相关的导电机理及气体敏感机理进行了分析.