Ultrasound-promoted green approach for the synthesis of multisubstituted pyridines using stable and reusable SBA-15@ADMPT/H5PW10V2O40 nanocatalyst at room temperature

ABSTRACT

A facile one-pot protocol for the synthesis of 2-amino-3-cyanopyridins using SBA-15@Triazine/H₅PW₁₀V₂O₄₀ as an efficient catalyst under ultrasonic conditions has been developed. The nanohybrid catalyst was prepared by the chemical anchoring of Keggin heteropolyacid H₅PW₁₀V₂O₄₀ onto the surface of SBA-15 mesoporous silica modified with 2-APTS -4,6-bis(3,5-dimethyl-1H-pyrazol- 1-yl)-1,3,5-triazine (ADMPT) linker. Then the nanohybrid was used as a green, efficient, eco-friendly, and highly recyclable catalyst for the one-pot and multi-component synthesis of 2-amino-3-cyanopyridin derivatives from the reaction of aldehydes, malononitrile, cyclic ketones and ammonium acetate under ultrasound waves with good to excellent yields (79–95%) and in a short span of time. This nanocatalyst was characterized by using FT-IR, XRD, SEM, TEM, BET, and EDX techniques.     

Facile Yb(OTf)3 promoted one-pot synthesis of polyhydroquinoline derivatives through Hantzsch reaction

Yb(OTf)₃ catalyzed efficient Hantzsch reaction via four-component coupling reactions of aldehydes, dimedone, ethyl acetoacetate and ammonium acetate at ambient temperature was described as the preparation of polyhydroquinoline derivatives. The process presented here is operationally simple, environmentally benign and has excellent yield. Furthermore, the catalyst can be recovered conveniently and reused efficiently.     

Diketene as an alternative substrate for a new Biginelli-like multicomponent reaction: one-pot synthesis of 5-carboxamide substituted 3,4-dihydropyrimidine-2(1H)ones

5-Carboxamide substituted 3,4-dihydropyrimidine-2(1H)one derivatives were synthesized in a simple and efficient method from the one-pot four-component reactions of an aliphatic or aromatic amine, diketene, an aromatic aldehyde and urea or thiourea in the presence of p-toluenesulfonic acid as a catalyst under mild reaction conditions at ambient temperature.     

Synthesis of 6-Amino-2,4-dihydropyrano[2,3-c]pyrazol-5-carbonitriles Catalyzed by Silica-Supported Tetramethylguanidine Under Solvent-Free Conditions

An efficient, high-yielding, and rapid protocol has been developed for the synthesis of diversity-oriented 6-amino-2,4-dihydropyrano[2,3-c]pyrazol-5-carbonitriles derivatives via a four-component, one-pot cyclocondensation reaction of ethyl acetoacetate, hydrazine hydrate, aldehydes, and malononitrile using silica-supported tetramethylguanidine as a heterogeneous catalyst for the first time. The protocol proves to be efficient and environmentally benign in terms of very easy workup, good yields, and ease of recovery of catalyst. In addition, the present method is superior in terms of green media, the amount of catalyst, and reaction time.     

InCl3-catalyzed four-component reaction: a novel synthesis of N-carbazolyl dihydropyridines

We have developed a simple, efficient, and environmentally benign microwave-assisted InCl₃-catalyzed synthesis of N-carbazolyldihydropyridines via a four-component reaction of 3-amino-9-ethylcarbazole, malononitrile, aromatic aldehydes, and acetylenic esters. The use of microwave heating allowed for reduced reaction times and resulted in higher yields. This four-component reaction is atom-efficient, high-yielding, and applicable to a wide variety of four-component reactions.     

La2O3/TFE： An efficient system for room temperature synthesis of Hantzsch polyhydroquinolines

Lanthanum oxide（La2O3） in combination with 2,2,2-trifluoroethanol（TFE） was found to be an efficient system for the one-pot, four-component synthesis of Hantzsch polyhydroquinoline derivatives from aromatic aldehydes, dimedone, ethyl acetoacetate and ammonium acetate at ambient temperature. The catalyst is heterogeneous and reusable, hence can be separated easily and reused. The present method is featured by mild reaction conditions, use of heterogeneous catalyst, non-chromatographic purification,short reaction time and high yields, which make it an attractive route for the synthesis of polyhydroquinolines.     

Synthesis of one-pot pyrazolo[4′,3′:5,6]pyrano[2,3-c]phenazin-15-yl) methanone derivatives via a multi-component using Fe3O4@TiO2-SO3H as a recoverable magnetic catalyst under microwave irradiation

ABSTRACT

A new one-pot method for the synthesis four-component of pyrazolo[4′,3′:5,6]pyrano[2,3-c]phenazin-15-yl)methanone derivatives has been developed in the presence of nano Fe₃O₄@TiO₂-SO₃H catalysts (heterogeneous acid) under microwave conditions and in a solvent-free environment at 180?W. One of the benefits of using this catalyst was its re-use in subsequent stages of its reaction without much loss in its activity, which was carried out by an external magnet and recovered. The catalyst was synthesized and characterized by XRD, EDX, TEM, FESEM, TGA-DTA, BET, VSM and AFM. The productivity of the products obtained from this protocol (MAOS) is significantly high and the shorter reaction time in the synthesis process over the reflux method. These results showed advantages for synthesis, such as mild reaction conditions, no use of toxic catalysts in the laboratory, solvent-free environment, low energy consumption and Economically Affordable.     

An efficient ‘on-water’ synthesis of 1,4-dihydropyridines using Fe3O4@SiO2 nanoparticles as a reusable catalyst

An ‘on-water’, efficient, high yielding, expeditious method has been developed for the synthesis of 1,4-dihydropyridine (1,4-DHP) derivatives via an one-pot multi-component condensation of dimedone or 4-hydroxycoumarine, aldehydes, and ammonium acetate using Fe₃O₄@SiO₂ nanoparticles as a recyclable heterogeneous catalyst. This method takes advantage of the fact that water, a green solvent is used in combination with Fe₃O₄@SiO₂ nanoparticles as catalyst which can be easily recovered magnetically and reused for further runs.     

AlCl3 as an Efficient Catalyst Toward the Synthesis of 1,6-Dihydropyrazine-2,3-dicarbonitrile Derivatives

Aluminium chloride has been shown to be an efficient catalyst for the multicomponent reactions of diaminomaleonitrile (DAMN), ketones or aldehydes, and isocyanides for the synthesis of 1,6-dihydropyrazine-2,3-dicarbonitrile derivatives using comparative study with various catalysts. Unprecedented use of aromatic and aliphatic aldehydes in this multicomponent reaction (MCR) was demonstrated.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resources: Full experimental and spectral details.]     

Ultrasound-assisted one-pot multi-component synthesis of 2-pyrrolidinon-3-olates catalyzed by Co3O4@SiO2 core–shell nanocomposite

2-pyrrolidinon-3-olates were synthesized via one-pot four-component reaction of 2-aminobenzothiazole, aromatic aldehydes, dimethyl acetylenedicarboxylate and morpholine/piperidine in the presence of Co₃O₄@SiO₂ core–shell nanocomposite as catalyst under ultrasound irradiation. The protocol offers several such advantages as high yields, short reaction time and mild reaction conditions with reusability of the catalyst. The core–shell nanocomposite was also prepared using ultrasound irradiation and the structure and magnetic properties were fully characterized by TEM, FE-SEM, XRD, EDX, FT-IR and VSM analysis.     

Sulfonic acid–functionalized Wang resin (Wang-OSO3H) as polymeric acidic catalyst for the ecofriendly multicomponent synthesis of polyhydroquinolines via Hantzsch condensation

An efficient and green approach has been developed for the synthesis of polyhydroquinoline derivatives via Hantzsch condensation reaction directly from corresponding substituted aromatic and aliphatic aldehydes, β-keto compounds, active methylene compounds, and ammonium chloride using recyclable polymer-supported sulfonic acid catalyst under aqueous conditions. Environmental acceptability, operational simplicity, low cost, excellent functional group compatibility, and high yields are the important features of this protocol.     

Synthesis of fully substituted pyrazolo[3,4-b]pyridine-5-carboxamide derivatives via a one-pot four-component reaction

A one-pot four-component reaction of an aliphatic or aromatic amine, diketene, an aromatic aldehyde and 1,3-diphenyl-1H-pyrazol-5-amine in the presence of p-toluenesulfonic acid as a catalyst has been developed. In this reaction, a new class of fully substituted pyrazolo[3,4-b]pyridine-5-carboxamide derivatives is produced under mild reaction conditions and in good yields at ambient temperature.     

A four-component, one-pot synthesis of highly substituted 1,4-dihydro-1,8-naphthyridine-3-carboxamides

A new, one-pot, four-component reaction for the synthesis of a novel class of highly substituted 1,4-dihydro-1,8-naphthyridine-3-carboxamide derivatives starting from readily available inputs including aliphatic or aromatic amines, diketene, aromatic aldehydes, and 2-aminopyridines in the presence of a catalytic amount of p-toluenesulfonic acid under mild reaction conditions and in good yields at ambient temperature is described.     

Fe（HSO4）3： An efficient,heterogeneous and reusable catalyst for the synthesis of 14-aryl- or alkyl- 14H-dibenzo[a,j]xanthenes

Fe（HSO4）3 has been used as an efficient and recyclable catalyst for the one-pot synthesis of 14-aryl- or alkyl-14Hdibenzo[aj]xanthene derivatives by the reaction of 2-naphtol and aldehydes. Different types of aromatic and aliphatic aldehydes are used in the reaction and in all cases the products were obtained in good to excellent yields.     

A one-pot synthesis of 5,5-disubstituted hydantoin derivatives using magnetic Fe3O4 nanoparticles as a reusable heterogeneous catalyst

A facile and rapid method for the one-pot synthesis of 5,5-disubstituted hydantoins in the presence of magnetic Fe₃O₄ nanoparticles has been developed. The multicomponent reactions of carbonyl compounds (aldehydes and ketones), potassium cyanide and ammonium carbonate were carried out under solvent-free conditions to obtain various hydantoin derivatives. The magnetic catalyst could be readily separated by an external magnet from the reaction mixture. This procedure has many advantages, such as the use of a reusable magnetic catalyst, high yields, short reaction times, simplicity and very easiness with implementing the methodology.     

Ytterbium triflate as an efficient catalyst for one-pot synthesis of substituted imidazoles through three-component condensation of benzil, aldehydes and ammonium acetate

Yb(OTf)₃ has been found to be an extremely efficient catalyst for the preparation of imidazoles derivatives via three-component coupling reactions of benzil, aldehydes and ammonium acetate under mild conditions. The process presented here is operationally simple, environmentally benign and has excellent yield. Furthermore, the catalyst can be recovered conveniently and reused for at least three reaction cycles without any loss of activity.     

Simple and efficient protocol for the synthesis of benzoxazole,benzoimidazole and benzothiazole heterocycles using Fe(Ⅲ)–Schiff base/SBA-15 as a nanocatalyst

Benzimidazoles, benzoxazoles, and benzothiazoles derivatives were synthesized from condensation of aldehydes and 1,2-phenylenediamine or ortho-aminophenol or ortho-aminothiophenol in the presence of catalytic amount of Fe(Ⅲ)–Schiff base/SBA-15 in water medium. Short reaction times, good to excellent yields, easy availability, reusability, and use of an eco-friendly catalyst are some of the significant attributes of the present method.     

Acetohydroxamic acid: a new reagent for efficient synthesis of nitriles directly from aldehydes using Bi(OTf)3 as the catalyst

An efficient method for the preparation of nitriles directly from aldehydes by reaction with AHA using Bi(OTf)₃ as the catalyst is described. Bi(OTf)₃ is shown to be an efficient catalyst also for the conversion of aldoximes into nitriles.     

Reaction in Dry Media: Silica Gel Supported Ferric Chloride Catalyzed Synthesis of 1,8-Dioxo-octahydroxanthene Derivatives

Herein, we describe a green procedure for the one-pot preparation of 1,8-dioxo-octahydroxanthene derivatives by condensation of dimedone and substituted benzaldehydes in the presence of FeCl ₃ -SiO ₂ as an efficient and heterogeneous catalyst under microwave irradiation and thermal conditions. This method has the advantages of high yields, cleaner reactions, efficient and cost-effective method, simple methodology, short reaction times, easy workup, and greener conditions.     

Hydrated ferric sulfate catalyzed synthesis of 3-[(alkyl/arylthio)(aryl)methyl]-1H-indole derivatives through one-pot reaction

A wide variety of 3-[(alkyl/arylthio)(aryl)methyl]-1H-indole derivatives (4a–z) were synthesized through a one-pot three-component reaction from indoles, aromatic aldehydes, and thiols at room temperature using hydrated ferric sulfate as a Lewis acid catalyst. The key features of the present protocol are mild and simple reaction procedure, moderate to good yields, requirement of inexpensive and reusable catalyst, no formation of dithioacetals derivatives from the corresponding aldehydes as well as bis-(indolyl) methane derivatives.