Pd-catalyzed coupling of aryl iodides with triarylbismuths as atom-economic multi-coupling organometallic nucleophiles under mild conditions

The facile cross-coupling reactivity of triarylbismuth compounds with aryl iodides was achieved under mild heating conditions. The established catalytic protocol using Pd(OAc)₂(Cy₂NH)₂ system exhibited high coupling reactivity with a variety of triarylbismuth and aryl iodide compounds under mild conditions. These coupling reactions were completed in short reaction time affording good to high yields of functionalized biaryl products. The studies of multi-coupling reactions with tris(4-iodophenyl)amine, 8 also furnished moderate to good yields of coupled products, 8a-8f.     

Copper-catalyzed N-arylation of 2-arylindoles with aryl halides

10 mol% Cul combined with the DMEDA ligand can efficiently catalyze the N-arylation of 2-arylindoles with aryl iodides and aryl bromides in good to excellent yields. The aryl halides bearing electron-rich or electron-deficient functional groups can be well tolerated under this mild reaction conditions.     

An efficient copper-catalyzed N-arylation of amides: synthesis of N-arylacrylamides and 4-amido-N-phenylbenzamides

Copper-catalyzed intermolecular C–N bond-forming reactions between aryl iodides and amides are described using sodium ascorbate, which is both cheap and nontoxic, as the additive. A variety of functionalized amides including some practical, unique secondary amides, such as N-arylacrylamides and 4-amido-N-phenylbenzamides, which are difficult to obtain by the classical methods, are prepared. Furthermore, some tertiary amides are prepared by using copper thiophenecarboxylate.     

Copper-mediated direct arylation of benzoazoles with aryl iodides

The direct arylation of 1,3-benzoazole compounds with aryl iodides is effectively promoted by CuI with use of PPh₃ and Na₂CO₃ or K₃PO₄ as ligand and base, respectively, in DMF or DMSO to produce the corresponding 2-arylated products with good yields.     

Benzotriazole: an excellent ligand for Cu-catalyzed N-arylation of imidazoles with aryl and heteroaryl halides

Benzotriazole (BtH) is an efficient ligand for the Cu-catalyzed N-arylation of imidazoles with aryl and heteroaryl halides. A combination of CuI/BtH was found to be an efficient and inexpensive catalyst system to carry out the N-arylation of imidazoles affording the corresponding products in good to excellent yields.     

N-arylation of azaheterocycles with aryl and heteroaryl halides catalyzed by iminodiacetic acid resin-chelated copper complex

<正>Iminodiacetic acid resin-chelated copper(Ⅱ) complex is effective in cross-coupling reactions between azaheterocycles and aryl or heteroaryl halides,providing N-arylated products in good to excellent yields.The copper catalyst is air stable and can be readily recovered and reused with minimal loss of activity for three runs.     

水相中底物促进的铜催化氨基醇N-芳基化反应

在水相体系中, 利用铜催化一系列氨基醇类底物(1.2 mmol)与碘代芳烃(1.0 mmol)进行N-芳基化反应. 由于氨基醇具有双齿配位及相转移催化能力, 该反应利用氨基醇类底物自身的促进作用, 在不使用外加配体与相转移催化剂的温和条件下以高收率获得了氨基醇N-芳基化产物(64%-93%).     

Ligand-free copper nanoparticle promoted N-arylation of azoles with aryl and heteroaryl iodides

A relatively mild, efficient, and inexpensive method for the nucleophilic aromatic substitution of the N–H heterocycles with various aryl and heteroaryl iodides using copper nanoparticles (Cu-NP) is reported. The coupling reaction has been successfully achieved with moderate to good yields.     

Syntheses, crystal structure and properties of two novel coordination polymers with the flexible tetrazole-1-acetic acid (Htza)

Two new coordination polymers, [Ag(tza)]_∞ (1) (Htza=tetrazole-1-acetic acid) and [Cu(tza)₂]_∞ (2) have been prepared at room temperature and characterized by X-ray crystallography, IR, UV-vis, fluorescence spectra and magnetism analysis. Compound 1 exhibits extended helical chains through bridging ligand tza. The AgAg interactions between the adjacent chains form a 3-D framework featuring the extended tza-connected Ag chains that obviously affect the photoluminescent property. Compound 2 features undulated layered structure with hourglass-shaped [Cu₄(tza)₄] as subunits with the weak ferromagnetic interactions between Cu(II) ions, which are further stabilized by inter-lamellar CHO hydrogen bonds in the resulting 3-D supramolecular framework.     

N-arylation of indoles with aryl halides using copper/glycerol as a mild and highly efficient recyclable catalytic system

A simple, efficient, and inexpensive copper catalyzed protocol has been developed for cross-coupling of indoles with aryl halides by using glycerol as a green recyclable solvent and DMSO as an additive. The reaction was carried out at low catalyst loading furnishing various N-aryl indoles in good to excellent yield. This copper/glycerol mixture was recycled up to four runs without any loss in its catalytic activity.     

Practical copper-catalyzed N-arylation of nitrogen heterocycles with aryl halides under ligand and additive free conditions

N-arylation of a wide variety of nitrogen heterocycles with aryl iodides catalyzed by copper iodide under mild ligand and additive free conditions (ⁿBu₄NBr, PhMe, NaOH, reflux, 22 h) was accomplished in good to excellent yields (up to 95%) and substrate conversions (up to 99%).     

Alkoxycarbonylation of aryl iodides catalyzed by Pd with a thiourea type ligand under balloon pressure of CO

Palladium-catalyzed alkoxycarbonylation of aryl iodides with a thiourea-oxazoline type ligand has been achieved under mild conditions. Various functional groups were tolerated and the yields were from moderate to excellent.     

1H-苯并三唑-1-乙酸稀土配合物的合成、表征及性质

溶液法合成了铕、铽与1H-苯并三唑-1-乙酸及1,10-邻菲啰啉的稀土配合物。通过元素分析、稀土配位滴定、摩尔电导、红外光谱、紫外光谱等手段对配合物进行了表征。结果表明,配合物的可能组成为Ln(L)3phen(Ln=Eu(III),Tb(III);HL=1H-苯并三唑-1-乙酸,Hbtaa;phen=1,10-邻菲啰啉)。利用荧光光谱、热分析和电化学方法讨论了配合物性质。荧光光谱表明配合物均有较好的发光性能。     

Ninhydrin: an efficient ligand for the Cu-catalyzed N-arylation of nitrogen-containing heterocycles with aryl halides

Cu₂O/ninhydrin was found to be an efficient catalyst system for the N-arylation of nitrogen-containing heterocycles with aryl and heteroaryl iodides, bromides and even unactivated chlorides to give the products in moderate to excellent yields.     

Nickel-catalyzed decarboxylative coupling of an alkynyl carboxylic acid with aryl iodides

A decarboxylative coupling reaction with an alkynyl carboxylic acid and aryl iodides in the presence of a nickel catalyst was developed. When the reaction was conducted with NiCl₂ (10 mol%), Xantphos (15 mol%), Mn (1.0 equiv), and Cs₂CO₃ (1.5 equiv), the desired diaryl alkynes were formed in moderated to good yields. Furthermore, this method does not produce the diyne, which is formed in the homocoupling of alkynyl carboxylic acids.     

2-(Trimethylsilyl)ethanol as a new alcohol equivalent for copper-catalyzed coupling of aryl iodides

2-(Trimethylsilyl)ethanol as a new alcohol equivalent has been employed for copper-catalyzed coupling of aryl iodides. Using mild reaction conditions, it has been observed that substituted phenols and phenols with sensitive functional groups can be readily prepared.     

Synthesis,structures, and characterization of cadmium(II), cobalt(II), and copper(II) metal polymers with tetrazole-1-acetate

Three new coordination polymers {[Cd(tza)(2,2′-bpy)(H₂O)](ClO₄)} _n 1, {[Co(tza)(2,2′-bpy)(H₂O)](ClO₄)} _n 2, and {[Cu(tza)(phen)](ClO₄)} _n 3 (Htza = tetrazole-1-acetic acid, 2,2′-bpy = 2,2′-bipyridyl, phen = 1,10-phenanthroline) were synthesized and characterized by X-ray single-crystal diffraction, elemental analysis, and IR spectra. Complexes 1 and 2 exhibit 3-D architectures formed by π–π interaction of 2,2′-bpy ligands interlinking to the adjacent 2-D layers. Complex 3 is a 1-D zigzag double chain and the 3-D structure is formed by π–π stacking interaction of phen and nonclassical hydrogen bonding.     

A fast and efficient method for the preparation of aryl azides using stable aryl diazonium silica sulfates under mild conditions

An efficient, fast, and straightforward procedure for the synthesis of aromatic azides using aryl diazonium silica sulfates and sodium azide at room temperature under mild conditions is described. The use of inexpensive materials, simple and clean work-up, short reaction times and good yields are advantages of this method.     

Cu-catalyzed decarboxylative iodination of aryl carboxylic acids with NaI: A practical entry to aryl iodides under aerobic conditions

A simple and practical Cu-catalyzed decarboxylative iodination has been well established under aerobic condition, which provides a useful method to synthesize aryl iodides in moderate to good yields with the use of (hetero)aryl carboxylic acids and NaI as starting materials. Thiabendazole has been prepared via a three-step procedure to show synthetic practicability of the protocol.     

Copper-catalyzed direct preparation of diaryl sulfides from aryl iodides using potassium thiocyanate as a sulfur transfer reagent

A method for direct preparation of diaryl sulfides from aryl iodides using potassium thiocyanate as a sulfur-transfer agent is reported. A catalyst system comprising of a simple copper salt, tetrabutylammonium bromide as a phase-transfer agent and water as the solvent is used. Microwave heating at 200 °C for 60 min allows for the conversion of a range of aryl iodides to the corresponding diaryl sulfides.