Amperometric glucose-sensing electrode based on carbon paste containing poly (ethylene glycol)-modified glucose oxidase and cobalt octaethoxyphthalocyanine

An amperometric enzyme electrode for glucose was prepared by incorporating poly (ethylene glycol)-modified glucose oxidase and cobalt octaethoxyphthalocyanine [CoPc(OEt)₈], a new mediator, into a carbon paste matrix. The polymer-modified enzyme exhibited a higher activity than the native enzyme in the hydrophobic carbon paste medium. CoPc(OEt)₈ could oxidize the enzyme at more negative potentials than unsubstituted cobalt phthalocyanine (CoPc). Further, the CoPc(OEt)₈-mediated enzyme electrode showed a high stability: the electrode response to glucose did not decrease for at least 4 weeks (or for 700 assays), whereas the glucose response from a CoPc-mediated enzyme electrode fell to half of the initial value within 2 weeks (or after 300 assays). CoPc(OEt)₈, a paraffin-oil soluble derivative of CoPc, incorporated in the bulk of carbon paste, diffused towards the electrode surface so as to renew continuously the electrode surface, which resulted in the high stability of the new mediator-based enzyme electrode.     

Effect of detonation nanodiamonds on the electrocatalytic activity of asymmetric cobalt phthalocyanine: Covalent versus non-covalent linking

We report on the effect of detonation nanodiamonds (DNDs) on electrocatalytic properties of an asymmetrically substituted cobalt phthalocyanine (CoPc). The incorporation of DNDs onto cobalt phthalocyanine enhances its electrochemical behaviour. An asymmetrical CoPc alone, when π-π stacked (CoPc-DNDs(ππ)) or covalently linked (CoPc@DNDs) to DNDs is used to modify a glassy carbon electrode (GCE) for the electrocatalytic detection of hydrazine. In addition, the GCE was modified by sequentially adding CoPc and DNDs onto its surface, represented as GCE/CoPc-DNDs(seq) when CoPc is placed before DNDs on the electrode and GCE/DNDs-CoPc(seq) when DNDs are placed before CoPc, where seq represents sequential. The obtained catalytic rate for the detection of hydrazine on GCE/CoPc@DNDs was 9.3×10⁴ M⁻¹.s⁻¹ with a limit of detection as 0.33 μM. GCE/CoPc@DNDs gave better electrocatalytic activities when compared to its counterparts.     

A cobalt(II) phthalocyanine with indole substituents: formation,characterization and electrocatalytic studies

Herein, we report the formation of a new cobalt(II) phthalocyanine (CoPc) containing peripheral tetra-substituted indole (CoPc-ind, 2) moieties. The derivatized phthalonitrile, 4-(indole-4-oxy)phthalonitrile (1) as well its corresponding metal complex was characterized by NMR (for 1), IR– and UV–Vis spectroscopy as well as TOF mass spectrometry and elemental analysis (for 2). The electrochemical properties of the N₄-macrocyclic metal complex were investigated using cyclic- and square-wave voltammetry as well as corroborated by UV–Vis spectroelectrochemistry. The CoPc was electrodeposited onto the surface of a Pt working electrode followed by the immobilization of multiwalled carbon nanotubes (MWCNTs) onto the modified working electrode surface. The electrocatalytic activity of the resultant modified electrode toward dopamine revealed a lower ΔE value of 80?mV versus Ag|AgCl for the modified (2-MWCNTs) Pt electrode compared to the bare Pt electrode (ΔE?=?280?mV vs. Ag|AgCl). The diffusion- and convection-controlled electron-transfer kinetics of the chemically modified electrode were evaluated by chronoamperometry and rotating disk electrode techniques. Electrochemical impedance spectroscopic studies revealed that the 2-MWCNTs Pt electrode had a lower charge-transfer resistance and a higher apparent electron-transfer rate constant.     

New Strategy for Dehydrogenase Amperometric Biosensors Using Surfactant to Enhance the Sensitivity of Diaphorase/Ferrocene Modified Carbon Paste Electrodes for Electrocatalytic Oxidation of NADH

A carbon paste electrode (CPE) modified with diaphorase (DAP) and ferrocene (FcH) has been developed for determination of NADH at low working potential. The sensitivity and operational stability, towards the detection of the reduced form of the nicotinamide adenine dinucleotide (NADH) in flow injection analysis (FIA), were greatly improved (5 times) upon adding Tween 20 into the electrode matrix. The magnitude of the amperometric signal was dependent on DAP, FcH and surfactant loading, into the modified carbon paste electrode. A rapid and repeatable response was observed to the variation of NADH concentration in the vicinity of the electrode surface. Such advantages of the DAP/FcH/Tween 20 modified carbon paste were successfully used in the construction of L ‐lactate dehydrogenase modified electrodes. The use of this new approach can be generalized to other dehydrogenases and represents a decisive step for a versatile preparation method of amperometric biosensors.     

Electrocatalytic Reduction and Flow Injection Analysis of Organic Peroxides at Polymeric Tetra-Amino Iron Phthalocyanine Modified Electrode

Abstract

It has been demonstrated that tetra-amino iron phthalocyanine can be polymerized onto a glassy carbon electrode by electrooxidation of the monomer in solution. Organic peroxides can be catalytically reduced at such polymeric film modified electrode. While on a bare glassy carbon electrode, none of the peroxides can be reduced within the potential range studied. When used in flow injection analysis, the modified electrode permits the detection of these compounds by reduction mechanism at higher potentials without the interference from oxygen. The response is stable and has a wide dynamic range.     

Cobalt phthalocyanine-graphene complex for electro-catalytic oxidation of dopamine

Cobalt phthalocyanine-graphene(CoPc-Gr) complex are fabricated through π-π interaction of each components,with CoPc adsorbed/inserted on/in the graphene sheets.The obtained complex could be used in the electro-chemical detection of various medicines.CoPc-Gr modified glassy electrode shows excellent response to the electro-oxidation of dopamine(DA) and ascorbic acid(AA),much better than those of CoPc,graphene oxide(GrO) or graphene(Gr) modified electrode.Significantly,the detection of dopamine is a diffusion-controlled process,highly selective,and has a low detection limit and broad linear range.     

Electrocatalytic Oxidation of 2‐Thiouracil and 2‐Thiobarbituric Acid at a Carbon‐Paste Electrode Modified with Cobalt Phthalocyanine

Voltammetric behavior of two mercaptopyrimidine derivatives (2‐thiouracil and 2‐thiobarbituric acid) has been studied by cyclic voltammetry at a cobalt phthalocyanine (CoPc)‐modified carbon‐paste electrode. The results of voltammetric determinations showed that the CoPc in the matrix of modified electrode acts as catalyst for electrooxidation of these thiols (RSH), lowering the overpotential of the reaction and significantly increasing the sensitivity for detection of thiols in neutral conditions. The results of voltammetric and polarization measurements in solutions with various pHs were used for prediction of the mechanism of electrocatalytic oxidation at the surface of modified electrode. These results showed that at the modified electrode, electrochemical oxidation of thiolate anion (RS^?) is the rate‐determining step. It was found that the modified electrode exhibits good selectivity for catalytic oxidation of mercaptopyrimidines over other biologically important mercaptans such as cysteine, glutathione and thioglycolic acid. The results demonstrate that the peak current for thiol oxidation has a linear variation with the concentration in the range of 1×10^?2–1×10^?5 M. This system can be used for sensitive and selective voltammetric detection of mercaptopyrimidine derivatives.     

Flow injection analysis of zinc pyrithione in hair care products on a cobalt phthalocyanine modified screen-printed carbon electrode

Zinc pyrithione (ZPT) is an antibacterial and antifungal reagent that is often utilized for the antidandruff activity in hair-care shampoos with a composition level up to 1% in the formulation. It has some adverse effects to human and animal if consumed orally. A disposable type of cobalt phthalocyanide modified screen-printed carbon electrode (CoPc/SPE) in couple with flow injection analysis (FIA) was developed for easy and selective analysis of ZPT in commercial hair-care products. Under the optimized FIA conditions, the CoPc/SPE yielded a linear calibration plot in the window of 6–576 μM with sensitivity and detection limit of 1.65 nA μM⁻¹ and 0.9 μM (i.e. 1.42 pg in 5 μl sample loop), respectively, in 0.1 M KOH solution at an applied potential of 0.3 V versus Ag/AgCl. Since the approach is simple, easy, selective, and inexpensive, it offers a potential application of daily ZPT analysis in hair-care products.     

钴卟啉修饰碳纤维束葡萄糖酶微电极的研究

生物电化学传感器的微型化研究是目前生物传感器研究中的一个很活跃的方向。我们曾用钴卟啉修饰碳纤维柱电极,并以它为基底制成了葡萄糖微传感器。为加强电极的抗折断能力,本文把约1千支碳纤维(φ9μm)做成碳纤维束盘微电极,在其表面修饰四苯基钴卟啉后,以其为基底制成了葡萄糖酶电极。将其用于流动注射分析,可以大大提高线性响应上限。     

Use of inherently conducting polymers and pulsed amperometry in flow injection analysis to detect oligonucleotides

Pulsed amperometry has been used to detect and discriminate between different base-pair oligonucleotides using flow injection analysis with polypyrrole modified electrodes. Oligonucleotides with 20-repeat units were immobilized as the sole counter anion during polymerisation of pyrrole onto a glassy carbon (GC) electrode. The modified electrode was then used in a flow injection analysis (FIA) set-up to selectively detect complementary oligonucleotides. Results showed that complementary oligo(dG)(20) and non-complementary oligonucleotides can be distinguished by using the oligo(dC)(20) modified electrode.     

Effect of Various Deposition Techniques,Electrode Materials and Posttreatment with Tetrabutylammonium and Tetrabutylphosphonium Salts on the Electrochemical Behavior and Stability of Various Prussian Blue Modified Electrodes

The effect of various deposition techniques, electrode materials and posttreatment with tetrabutylammonium and tetrabutylphosphonium salts on the electrochemical behavior and stability of various Prussian blue (PB) modified electrodes, namely PB modified glassy carbon electrodes, silicate‐film supported PB modified glassy carbon electrodes, PB‐doped silicate glassy carbon electrodes, PB modified carbon ceramic electrodes using electrochemical deposition and PB modified carbon ceramic electrodes using chemical deposition is reported. Cyclic voltammetry and amperometric measurements of hydrogen peroxide were performed in a flow injection system while the carrier phosphate buffer (pH 7.0) with a flow rate of 0.8 mL min^?1 was propelled into the electrochemical flow through cell housing the PB modified working electrode as well as an Ag|AgCl|0.1 M KCl reference and a Pt auxiliary electrode. The results showed that the deposition procedure, electrode material and posttreatment with additional chemicals can significantly alter the stability and electrochemical behavior of the PB film. Among the studied PB modified electrodes, those based on carbon ceramic electrodes modified with a film of electropolymerized PB showed the best electrochemical stability.     

碳载钴酞菁催化剂的一步法制备及其在碱性条件下对氧的电催化还原

通过固相加热,一步合成了以VulcanXC-72(碳黑)为载体的碳载钴酞菁(CoPc/C)复合催化剂,其可用作空气电极的氧还原催化剂。通过X射线衍射、红外光谱等测试技术对催化剂进行了表征。利用极化曲线和交流阻抗(EIS)方法测试了其在碱性介质(6mol/LKOH)中对氧还原的催化性能。结果显示,得到的产物为CoPc/C复合物,平均粒径30nm。以磷酸处理的碳黑为载体,在600℃下制备的CoPc/C复合催化剂表现出最佳的催化活性。以其制备的电极在空气气氛下-0.03V(Hg/HgO)电位时即可产生明显氧还原电流,-0.2V时电流密度达90×10-3A/cm2。     

聚对氨基苯磺酸修饰玻碳电极不可逆双安培法测定酪氨酸

在玻碳电极上成功地制备了聚对氨基苯磺酸修饰电极(P-p-ABSA/GCE),研究了酪氨酸在该修饰电极上的电化学行为.将此修饰电极用于流动注射不可逆双安培体系的构建,建立了流动注射双安培法直接测定酪氨酸的方法.在0 V外加电压下,在0.005 mol/L硫酸载液中,酪氨酸的氧化峰峰电流与其浓度在2.0×10-6 ～2.0×10-4 mol/L范围内呈良好的线性关系,方法的检出限(S/N=3)为1.0×10-7 mol/L.连续测定1.00×10-5 mol/L的酪氨酸标准溶液,电流值的相对标准偏差(RSD)为1.48%(n=20).该方法具有较高的选择性和灵敏度,应用于测定复方氨基酸注射液中酪氨酸的含量的测定,结果比较满意.     

Flow Injection Analysis of Iodate Reduction on PEDOT Modified Electrode

Poly‐(3,4‐ethylenedioxythiophene) (PEDOT) films were electrodeposited by cyclic voltammetry on glassy carbon electrode at different anodic potentials in the range of 1.0–1.5 V (Ag/AgCl) and its electrocatalytic properties towards reduction of iodate were reported. The effect of the pH of the solution on the response of PEDOT electrode towards iodate also studied. The modified electrode was employed successfully as an amperometric sensor for iodate in a flow injection apparatus. The repeatability of the method for 14 injections of a μM iodate solution was 7%. Interference from other oxidant anions such as nitrate was not noticeable, whereas bromate, chlorate and nitrite interfere at slight levels.     

Electrochemical Preparation of Poly(Malachite Green) Film Modified Nafion‐Coated Glassy Carbon Electrode and Its Electrocatalytic Behavior Towards NADH,Dopamine and Ascorbic Acid

Poly(malachite green) film modified Nafion‐coated glassy carbon electrodes have been prepared by potentiodynamic cycling in malachite green solution. The pH of polymerisation solution has only minor effect on film formation. Electrochemical quartz crystal microbalance (EQCM) was used to monitor the growth of the poly(malachite green) film. Cyclic voltammogram of the poly(malachite green) film shows a redox couple with well‐defined peaks. The redox response of the modified electrode was found to be depending on the pH of the contacting solution. The peak potentials were shifted to a less positive region with increasing pH and the dependence of the peak potential was found to be 56 mV per pH unit. The electrocatalytic behavior of poly(malachite green) film modified Nafion‐coated glassy carbon electrodes was tested towards oxidation of NADH, dopamine, and ascorbic acid. The oxidation of dopamine and ascorbic acid occurred at less positive potential on poly(malachite green) film compared to bare glassy carbon electrode. In the case of NADH, the overpotential was reduced substantially on modified electrode. Finally, the feasibility of utilizing poly(malachite green) film electrode in analytical estimation of ascorbic acid was demonstrated in flow injection analysis.     

酞菁钴及其衍生物修饰电极对分子氧的电催化还原

在玻碳电极上采用吸附法制备了四溴代酞菁钴(CoPcBr₄)、酞菁钴(CoPc)和四-α-(2,2,4-三甲基-3-戊氧基)酞菁钴(CoPc(OC₈H₁₇)₄)修饰电极。利用循环伏安法和线性扫描伏安法研究了修饰电极在酸性介质中对分子氧的电催化还原,比较了不同取代基的酞菁钴对电催化性质的影响。结果表明,它们对分子氧还原均具有良好的电催化活性,其中酞菁钴和四-α-(2,2,4-三甲基-3-戊氧基)酞菁钴对O₂的催化是2电子还原生成H₂O₂,与裸电极相比,O₂的还原峰电位分别向正方向移动了0.33和0.48 V。而四溴代酞菁钴修饰电极在-0.1和-0.7 V附近产生的2个还原峰,说明它催化O₂到H₂O₂的还原以后还可以促进H₂O₂继续还原到H₂O,最终实现O₂的4电子还原。     

Bioelectrochemical studies on catalase modified glassy carbon paste electrodes

The enzyme catalase (EC: 1.11.1.6) has been covalently coupled onto the surface of glassy carbon (GC) powder matrix using a 16 atom spacer arm. The enzyme coupled powder was made into a paste electrode that was used to study the electrochemical properties. Standard electrochemical techniques like cyclic voltammetry, differential pulse voltammetry and flow injection analysis studies were carried out using this paste electrode. The cyclic voltammogram of the modified paste exhibited a clear increase in the reduction peak at −180 mV in the presence of hydrogen peroxide. The potential at which maximum Faradaic activity was observed was determined using differential pulse voltammetry, which showed a clear peak at −100 mV. This potential was used to monitor the response of the electrode to varying substrate concentrations using a home made setup for flow injection analysis. A linear increase in the current values in the range 0.1–1 mM hydrogen peroxide concentration was observed in our system.     

Electrocatalytic oxidation and flow detection of cysteine at an aquocobalamin adsorbed glassy carbon electrode

A chemically modified electrode (CME) constructed by adsorption of aquocobalamin (VB12a) onto a glassy carbon electrode surface was demonstrated to catalyze the electro-oxidation of cysteine, a sulfhydryl-containing compound. The sulfhydryl oxidation occurred at 0.54-0.88 V vs. Ag AgCl depending on pH value (3.0-10.0). The electrocatalytic behavior of cysteine is elucidated with respect to solution pH, operating potential and other variables as well as the CME preparation conditions. When used as the sensing electrode in flow injection amperometric detection, the CME permitted detection of the compound at 0.8 V. The detection limit was 1.7 pmol. The linear response range went up to 1.16 nmol. The stability of the CME was shown by RSD (4.2%) over 10 repeated injections.     

Nanobiocomposite Modified Carbon‐Ceramic Electrode Based on Nano‐TiO2‐Plant Tissue and Its Application for Electrocatalytic Oxidation of Dopamine

A new modified carbon‐ceramic electrode was prepared by incorporating TiO₂ nanoparticle into sol‐gel network by accompanying apple tissue. A mixture of fine graphite powder with 15 wt% of TiO₂ nanoparticle was used for the preparation of the carbon matrix and finally modification with a known amount weighted of apple tissue. The apple tissue containing polyphenol oxidase enzyme acts as molecular recognition element. The electrocatalytic oxidation of dopamine was investigated on the surface of the nanobiocomposite modified carbon‐ceramic electrode using cyclic voltammetry, chronoamperometry and amperometry techniques. Effect of pH, scan rate, TiO₂ percentage on the response of modified electrode was studied. The prepared modified electrode presented a linear range for dopamine from 5.0×10^?6 to 1.2×10^?3 M in buffered solutions with pH 7.4 by amperometry. The detection limit was 3.41×10^?6 M dopamine. The response of the modified carbon‐ceramic electrode and unmodified carbon‐ceramic electrode was compared.     

Fabrication of carbon microelectrodes with a micromolding technique and their use in microchip-based flow analyses

In this paper, we report a new technique to pattern carbon microelectrodes for use in microfluidics. This technique, termed micromolding of carbon inks, uses poly(dimethylsiloxane)(PDMS) microchannels to define the size of the microelectrode. First, PDMS microchannels of the approximate dimensions desired for the microelectrode are made by soft lithography. The PDMS is then reversibly sealed to a substrate and the microchannels are filled with carbon ink. After a heating step the PDMS mold is removed, leaving a carbon microelectrode with a size slightly smaller than the original PDMS microchannel. The resulting microelectrode (27 microm wide and 6 microm in height) can be reversibly sealed to a PDMS-based flow channel. Fluorescence microscopy showed that no leakage occurred around the chip/electrode seal, even up to flow rates of 10 microL min(-1). The electrode was characterized by microchip-based flow injection analysis. Injections of catechol in Hank's Balanced Salt Solution (pH 7.4), showed a linear response from 2 mM to 10 microM (r(2)= 0.995), with a sensitivity of 56.5 pA microM(-1) and an estimated limit of detection of 2 microM (0.27 picomole, S/N=3). Reproducibility of the electrode response was shown by repeated injections (n= 10) of a 500 microM catechol solution, resulting in a RSD of 4.6%. Finally, selectivity was demonstrated by coating the microelectrode with Nafion, a perfluoronated cation exchange polymer. Dopamine exhibited a response at the modified microelectrode while ascorbic acid was rejected by the Nafion-coating. These electrodes provide inexpensive detectors for microfluidic applications while also being viable alternatives to use of other carbon microelectrode materials, such as carbon fibers. Furthermore, the manner in which the microelectrodes are produced will be of interest to researchers who do not have access to state of the art microfabrication facilities.