La~2NiO~4催化制备纳米碳管

制备了四方结构复合氧化物La~2NiO~4,并以其为催化剂前体,甲烷和一氧化碳为碳,合成出大量高纯度的纳米碳管。XRD结果表明La~2NiO~4经还原后,在La~2O~3的隔离作用下Ni晶粒实现纳米级均匀分散。利用TEM,HRTEM,SEM,XRD,Raman等手段对所制备的纳米碳管进行了观察和表征。所制备的纳米碳管管径均匀、石墨化程度较高,该法制备纳米碳管工艺简单、产量较高,产品易于纯化。     

高被引文章

A Cu₃(BTC)₂ (copper(Ⅱ) benzene 1, 3, 5-tricarboxylate) metal organic framework (MOF) catalyst was successfully prepared through an electrochemical route and used for selective catalytic reduction of nitrogen oxide (NO_x) with NH₃ for the first time. After systematically optimizing the reaction conditions such as solvents, voltage, electrolyte concentration, and reaction time, pure Cu₃(BTC)₂ with high crystallinity was obtained in 97.2% yield. The physicochemical properties of the catalyst were determined using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), Raman spectroscopy, in situ Fourier transform infrared (FTIR) spectroscopy, temperature-programmed desorption (TPD), and X-ray photoelectron spectroscopy (XPS). TGA results indicated that the framework was stable up to 310℃. The catalytic activity of Cu₃(BTC)₂ was evaluated using NO conversion as a model reaction. The Cu₃(BTC)₂ activation temperature significantly affected the catalytic activity. The Cu₃(BTC)₂ sample activated at 240℃ had the best catalytic activity and gave NO conversion of 90% at 220-280℃. A reaction mechanism was proposed based on the in situ FTIR spectroscopy results.     

NiO亚微米球的制备及其光催化性质

在混合溶剂体系中,通过简单的二步方法成功合成了NiO亚微米球。第一步,以Ni(CH3COO)2和精氨酸为主要反应物,160℃溶剂热反应8 h制备出前驱体;第二步,煅烧前驱体成功合成了NiO产物。利用X射线粉末衍射(XRD),扫描电子显微镜(SEM),透射电子显微镜(TEM),热重分析(TGA)等手段对产物进行了表征。在紫外光照射下,研究不同光催化剂对甲基橙溶液降解效果。结果表明,NiO亚微米球在紫外光照射条件下对甲基橙溶液有光降解作用。     

In situ carbon nanotube synthesis by the reduction of NiO/γ-Al2O3 catalyst in methane

The synthesis of carbon nanotubes (CNTs) via chemical vapour deposition of methane on NiO/γ-Al2O3 catalyst has been investigated. The reduction behavior of NiO/γ-Al2O3 by methane was studied using thermogravimetric (TG) and X-ray diffraction (XRD) techniques. It was found that the NiO supported on γ-Al2O3, was reduced to Ni⁰ in methane atmosphere in the temperature range of 710--770 ℃. The catalytic activity of NiO/γ-Al2O3 for CNTs synthesis by in situ chemical vapour deposition of methane during the reduction was also investigated. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to observe the CNTs produced at various reduction temperatures. The results indicated that the reduction temperature exhibits obvious influence on the morphology and the yield of CNTs. CNTs with the diameter of about 20 nm were obtained at reduction temperature of 750 ℃, and higher reduction temperature (such as 800 and 850 ℃) led to an increase in CNTs diameter and a decrease in CNTs yield.     

MOF-derived hollow NiO–ZnO composite micropolyhedra and their application in catalytic thermal decomposition of ammonium perchlorate

Ni(II)-doped Zn-based coordination polymer particles (Ni(II)-doped Zn-CPPs) with controllable shape and size were successfully synthesized by solvothermal method, which further transformed to porous ZnO–NiO composite micropolyhedra without significant alterations in shape by calcination in air. Those products were characterized by powder X-ray diffraction (XRD), field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), infrared spectroscopy (IR) and gas adsorption measurements. The catalytic activity of ZnO–NiO composites for the thermal decomposition of ammonium perchlorate (AP) was investigated. The result shows that all ZnO–NiO composites efficiently catalyzed the thermal decomposition of AP, and NiO–ZnO composite hollow octahedrons have the highest catalytic efficiency compared with that of most materials reported to now, indicating that porous ZnO–NiO composite micropolyhedra could be a promising candidate material for application in AP-based propellant.     

A Study on Production of Carbon Nanotubes by CH_4 Decomposition over LaNiO_3,La_4Ni_3O_(10),La_3Ni_2O_7 and La_2NiO_4

IntroductionIn the present study, by employing the citric acid complex method1, we prepared a series of perovskite-type oxides, viz. LaNiO3, La4Ni3O10, La3Ni2O7 and La2NiO4 for the growth of CNTs. After H2 reduction, the catalysts turn into La2O3 and active component Ni0 of various sizes. By means of CH4 decomposition over the reduced catalysts, high quality CNTs with dissimilar diameters can be generated in mass amount. In this paper, we attempt to make a comparison on the structure…     

预还原催化剂LaNiO3, La4Ni3O10, La3Ni2O7和La2NiO4 催化分解CH4制碳纳米管 的研究

通过预还原的LaNiO3,La4Ni3O10,La3Ni2O7和La2NiO4催化分解CH4可以制备大量高度石墨化的碳纳米管。还原前后的催化剂的结构和组分通过X射线衍射(XRD)测定。所制得的碳纳米管由扫描电镜(TEM)、X射线光电子能谱(XPS)表征。碳纳米管在空气在的热氧化性由热重实验(TG)测定。实验结果表明不同催化剂前驱中的La/Ni比会影响碳纳米管的管径分布和石墨化程度。La/Ni比越小,碳纳米管的管径越大,石墨化程度越高。     

Nano NiO/AlMCM‐41, a green synergistic,highly efficient and recyclable catalyst for the reduction of nitrophenols

Highly ordered mesoporous molecular sieves AlMCM‐41 and a new NiO/AlMCM‐41 nanocomposite were synthesized using a sol–gel method. Fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X‐ray spectroscopy (EDX), and N₂ adsorption desorption analyses were used to examine the structure, morphology, size and phase composition of the synthesized NiO/AlMCM‐41 nanocomposites. AlMCM‐41 embedded with NiO nanoparticles was subsequently prepared using different nickel loadings in a direct synthetic route. The results show the successful deposition of NiO nanoparticles onto the framework of AlMCM‐41. AlMCM‐41 provides enormous benefits such as environmentally safe, economic viability and porosity when used as support for NiO nanoparticles. The excellent catalytic activities of AlMCM‐41 and NiO/AlMCM‐41 were investigated for the reduction of nitrophenols (4‐NP, 2‐NP) to aminophenols (4‐AP, 2‐AP) in water at ambient temperature. The best observed performance of reduction of NP with 100% conversion into analogous amino derivatives occurred within 6 min with an estimated rate constant of 0.46 min^?1. The efficiency of reduction was observed to increase as a function of NiO enrichment. The NiO/AlMCM‐41 nanocomposite could be recycled and reused up to five times without noticeable change in its structure and activity. These properties make NiO/AlMCM‐41 nanocomposite an ideal platform to study various heterogeneous catalytic processes which can have application in purification, catalysis, sensing devices, and green chemistry.     

Preparation and characterization of NiO nanoparticles from thermal decomposition of the [Ni(en)3](NO3)2 complex: A facile and low-temperature route

NiO nanoparticles with an average size of 15 nm were easily prepared via the thermal decomposition of the tris(ethylenediamine)Ni(II) nitrate complex [Ni(en)₃](NO₃)₂ as a new precursor at low temperature, and the nanoparticles were characterized by thermal analysis (TGA/DTA), X-ray diffraction (XRD), Fourier-transformed infrared spectroscopy (FT-IR), UV-Vis spectroscopy, BET specific surface area measurement, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and magnetic measurements. The magnetic measurements confirm that the product shows a ferromagnetic behavior at room temperature, which may be ascribed to a size confinement effect. The NiO nanoparticles prepared by this method could be an appropriate photocatalytic material due to a strong absorption band at 325 nm. This method is simple, fast, safe, low-cost and also suitable for industrial production of high purity NiO nanoparticles for applied purposes.     

Simple Transformation of Hierarchical Hollow Structures by Reduction of Metal–Organic Frameworks and Their Catalytic Activity in the Oxidation of Benzyl Alcohol

Metal–organic framework (MOF)-based derivatives have been found to be promising heterogeneous catalysts for organic transformations. Herein, hollow-structure Cu-MOFs derived by reduction of Cu₃(BTC)₂ (BTC=1,3,5-benzenetricarboxylate; denoted as RCB) were prepared by using hydrazine hydrate as a reducing agent under various conditions. The influence of hydrazine hydrate induced the structure of Cu₃(BTC)₂ and led to dynamic variation in the interior and exterior as well as oxidation states of the Cu ion. The synthesized materials were characterized by SEM, TEM, N₂ sorption isotherms, XRD, and XPS. The product of the catalytic reaction was observed by GC-MS. In addition, the prepared RCBs were found to have excellent catalytic activity and selectivity for benzyl alcohol oxidation when assisted by 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO).     

Production of High Purity Multi-Walled Carbon Nanotubes from Catalytic Decomposition of Methane

Acid-based purification process of multi-walled carbon nanotubes (MWNTs) produced via catalytic decomposition of methane with NiO/TiO2 as a catalyst is described. By combining the oxidation in air and the acid refluxes, the impurities, such as amorphous carbon, carbon nanoparticles, and the NiO/TiO2 catalyst, are eliminated. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images confirm the removal of the impurities. The percentage of the carbon nanotubes purity was analyzed using thermal gravimetric analysis (TGA). Using this process, 99.9 wt% purity of MWNTs was obtained.     

LiFeO_2包覆MCFC氧化镍阴极的制备及性能研究

以硝酸锂和硝酸铁为原料 ,柠檬酸作燃料 ,采用燃烧合成法制备了铁酸锂包覆的多孔氧化镍阴极 .X_射线衍射技术 (XRD)、X_射线能量散射谱 (EDAX)和电子显微镜 (TEM和SEM )分析表明 ,在氧化镍颗粒表面的包覆层是由直径小于 10 0nm的铁酸锂微粒所构成 ,并与氧化镍颗粒紧密烧结在一起 ,有效地减少了氧化镍与熔融碳酸盐的接触面积 ,从而降低了氧化镍的溶解度 .同时 ,本文还研究了该阴极在熔融碳酸盐燃料电池中的电性能 ,并与未包覆的NiO阴极进行比较     

Simple and low-temperature synthesis of NiO nanoparticles through solid-state thermal decomposition of the hexa(ammine)Ni(II) nitrate, [Ni(NH3)6](NO3)2, complex

NiO nanoparticles with an average size of about 12 nm were easily prepared via the thermal decomposition of hexa(ammine)Ni(II) nitrate complex, [Ni(NH₃)₆](NO₃)₂, at low temperature of 250 °C. The product was characterized by thermal analysis (TGA/DTA), X-ray diffraction (XRD), Fourier-transformed infrared spectroscopy (FT-IR), UV-Vis spectroscopy, BET specific surface area measurement, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), and magnetic measurement. The magnetic measurement revealed a small hysteresis loop at room temperature, confirming a superparamagnetic (weak ferromagnetic) nature of the synthesized NiO nanoparticles. Indeed, the NiO nanoparticles prepared by this method could be an appropriate semiconductor material due to the optical band gap of 3.35 eV which shows a red shift in comparison with the previous reports. This method is simple, fast, safe, low-cost and also suitable for industrial production of high purity NiO nanoparticles for applied purposes.     

Synthesis of Well-Dispersed NiO Nanoparticles with a Room Temperature Ionic Liquid

NiO nanoparticles have been prepared in a room temperature ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF₄). The morphology and microstructures of the NiO nanoparticles were investigated by transmission electron microscopy (TEM) and x-ray diffraction (XRD). The TEM micrographs indicated that the nanoparticles are uniform hexagons and well-dispersed. From the XRD patterns, the nanoparticles could be identified as cubic phase. In the reaction, bmimBF₄ is likely to act as a stabilizer and as a template, controlling the dispersion and morphology of the product.     

Fly ash supported NiO as an efficient catalyst for the synthesis of xanthene and its molecular docking study against plasmodium glutathione reductase

A novel fly ash supported NiO (FA–NiO) nanocomposite solid heterogeneous catalyst has been prepared by impregnation of Ni(NO₃)₂ · 6H₂O on thermally activated fly ash (FA) support. FT-IR spectroscopy, X-ray diffraction analysis, scanning electron microscopy, TEM and BET techniques were employed to characterize the catalyst. The catalytic adeptness of FA–NiO was tested and optimized in xanthene formation. Catalyst gave very high yield and good purity. Stability of the catalyst could be promising as it easily recovered and reused giving a similar yield up to four cycles. FA–NiO is an efficient catalyst providing an environmentally clean process for xanthene formation and for developing a revolutionary way to use the majority of waste fly ash. Further, we have also performed docking simulation between 1ONF and a xanthene molecule to evaluate binding orientation and affinity of the ligand.     

不同结构及氮掺杂NiO/rGO氧还原催化剂的制备与性能研究

本文以还原氧化石墨烯（rGO）为载体制备了片状NiO/rGO和球形NiO/N-rGO结构的氧还原催化剂. 通过X-射线衍射（XRD）、Raman（拉曼）测试、X-射线光电子能谱（XPS）、扫描电子显微镜（SEM）和透射电子显微镜（TEM）等方法表征了两种催化剂的结构和形貌. 采用循环伏安法（CV）、Tafel曲线、线性扫描伏安法（LSV）、旋转圆盘电极（RDE）和旋转环盘电极（RRDE）等技术测试研究了两种催化剂的电化学催化氧还原性能. 研究结果表明,球形NiO/N-rGO催化剂催化氧还原的峰电流密度和起始电位（0.89 V vs. RHE）与商业化的Pt/C（20%）催化剂相近. 旋转圆盘电极（RDE）和旋转环盘电极（RRDE）测试证明,在碱性电解液中NiO/rGO和NiO/N-rGO催化的氧还原反应均主要通过4?鄄电子途径反应途径发生,球形NiO/N-rGO催化剂展现出替代Pt/C基催化剂的潜力.     

前驱物对NiO/SiO_2气凝胶催化剂性能的影响

分别用硝酸镍、醋酸镍和氯化镍为活性组分前驱物,正硅酸乙酯为硅源,采用 溶胶凝胶超临界流体干燥法制备了N-SiO_2,Ac-SiO_2和C-SiO_2催化剂,经TEM, TPR,XRD,IR等物性结构表征及催化加氢活性评价结果表明：前驱物对由溶胶凝胶 法制备催化剂中氧化镍的分散性,晶粒大小及与载体的相互作用都有明显的影响, N-SiO_2催化剂有Ni-O-Si键形成,NiO呈簇团结构,粒径最小,分散性最好,但加 氢活性最低;Ac-SiO_2和C-SiO_2催化剂中氧化镍呈微晶态,与载体相互作用较弱 。在三种催化剂中,NiO与载体相互作用强弱顺序为：N-SiO_2 > Ac-SiO_2 > C- SiO_2,但加氢活性大小顺序相反为：C-SiO_2 > Ac-SiO_2 > N-SiO_2;C-SiO_2催 化剂加氢活性和丁二酸酐的选择性均在99%以上。     

多级结构Ni@CuS复合物的合成及在提高催化还原4-硝基苯酚性能方面的应用

三种多级结构花状硫化铜通过水热法,利用纳米薄片自组装形成.加入有机分子聚乙烯吡咯烷酮或1, 3, 5-均苯三甲酸调控其片层密度.产物作为基板生长镍纳米颗粒.通过环境扫描电子显微镜(SEM), X射线衍射(XRD),透射电子显微镜(TEM)等对这种复合物的结构进行表征.利用紫外-可见吸收光谱,研究了产物作为催化剂催化还原4-硝基苯酚的性能.结果表明,长在具有最稀疏片层的样品(Ni@SUB2)上的镍纳米颗粒(NiNPs,直径5 nm左右)具有超低负载量,为0.469% (w). Ni@SUB2在三种Ni@SUB复合物中具有最好的催化性能.还原4-硝基苯酚的反应中, 4-硝基酚初始浓度为0.2 mmol·L^-1时Ni@SUB2在4 min中内转化率可以实现100%,而等量的纯Ni纳米颗粒转化率只有43%.增强的催化性能可以归结为镍纳米颗粒在硫化铜基板上得到良好分散,可以提供更多催化位点.同时硫化铜基板不溶于水,可以通过离心的方式回收催化剂,有利于环境保护.     

Ni/MgO-Al2O3催化剂上高温焦油组分的催化转化

采用分步浸渍法制备了MgO-Al2O3负载的Ni基催化剂, 并运用N2吸附、载射线衍射(XRD)、透射电子显微镜(TEM)等手段进行表征. 该催化剂用于甲苯或萘为焦油模拟化合物的高温焦炉煤气(COG)的常压加氢裂解反应, 并考察了H2浓度、H2S对催化剂活性的影响. 结果表明: 催化剂还原后, 表面形成均匀分散、直径为8-14 nm的金属Ni纳米颗粒; 在较低的水碳摩尔比(nH2O/nC=0.28)时, 甲苯就能完全转化并选择性地加氢裂解形成CH4, 测试的时间内(480 min), 催化剂没有明显的失活和积炭现象, 显示出好的反应活性、稳定性和耐硫能力. 制得的Ni/MgO-Al2O3催化剂有望应用于较低水含量(10%-15%(φ, 体积分数))的高温焦炉煤气中焦油的直接转化.     

Controllable synthesis of NiC2O4·2H2O nanorods precursor and applications in the synthesis of nickel-based nanostructures

A controllable synthesis of NiC₂O₄·2H₂O nanorods precursor was obtained via the microemulsion-mediated solvothermal method and a further synthesis of β-Ni(OH)₂ nanorods, nickel oxide (NiO) sub-microtubes, Ni nanospheres and flower-like nickel complexes nanostructures by using the precursor. The morphologies and crystalline structures were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and the X-ray powder diffraction (XRD). The morphologies and sizes of the precursors can be readily tuned by adjusting experimental parameters of the reverse microemulsion system. The synthesized β-Ni(OH)₂ nanorods composed of fine nanosheets shown excellent electrochemical performance as an electrode material in rechargeable battery systems.