X-ray reflectivity measurements of layer-by-layer films at the solid/liquid interface

In this Letter, we present a method for the decoration of layer-by-layer (LbL) structures by heavy metal ions, which allows X-ray reflectivity (XRR) measurements at the solid/water interface. The improved contrast has allowed us to obtain well-structured X-ray reflectivity curves from samples at the liquid/solid interface that can be used for the film structure modeling. The developed technique was also used to follow the formation of complexes between DNA and the LbL multilayer. The XRR data are confirmed by independent null-ellipsometric measurements at the solid/liquid interface on the very same architectures.     

Structure of thin block copolymer films studied by X-ray reflectivity

Summary X-ray reflectivity may be used to determine the internal structure of thin polymer films. An electron density difference of 10% for polystyrene and polyisoprene is sufficient to distinguish between a random distribution of lamellae, complete orientation parallel to the substrate surface and a surface induced formation of lamellae. The disappearance of the lamellar Bragg-peaks, with heating of the film, shows the transition into the disordered state.     

Structure of adsorption layers of ionic surfactants at the solid/liquid interface

A large number of experimental results of different surfactant adsorption systems (mainly on the silicas) obtained from both equilibrium and kinetic studies under different conditions are interpreted by a model of small individual surface aggregates. The adsorption model is contrasted with the influences of various factors, including electrostatic interaction, hydrophobic interaction, concentrations, types of coions, types of counterions, surfactant structure, alkyl chain length, types of head groups, neutral electrolytes, pH, adsorbent structure, porosity, surface charge density, and surface polarity.Dedicated to Frau Professor Dr. Elsa Ullmann on the occasion of her 80th birthday     

New insights into the solid–liquid interface exploiting neutron reflectivity

1. Download : Download high-res image (158KB)
2. Download : Download full-size image

     

X-ray reflectivity study of polymer assembly at air-water interface

X-ray reflectivity (XR) measurements were carried out for amphiphilic diblock copolymer monolayers on water surface. From XR data, the layer thickness, and surface and interface roughnesses could be determined as a function of surface pressure. The XR experiments were performed using an ‘Air–Water Interface X-ray Reflectometer’ with conventional X-ray source (Cu target) in our laboratory. LB trough was equipped to the reflectometer, so the in situ measurements could be carried out for spread monolayers on water surface at different surface pressures. Kiessig fringes were observed for specular measurement for amphiphilic diblock copolymer, poly(α-methylstyrene)-poly(decyl 4-vinylpyridine) (P(α MSt)-b-P(4VP-C₁₀H₂₁I)) monolayers on water surface. It was observed that the thickness of the monolayer became thicker with increasing surface pressure. By curve fitting for the data obtained for the monolayer at surface pressure of 37 mN m^-1, the thicknesses of P(αMSt)₅₀ and P(4VP-C₁₀H₂₁I)₅₀ layers was determined to be 21 and 22 Å, respectively. Because the chain length of P(αMSt)₅₀ is calculated to be 126 Å in all-trans conformation, it was indicated that the molecules did not get aligned even when they were pressedto become such a dense state.     

Graphene oxide hydrogel at solid/liquid interface

A strong solid/liquid interfacial interaction is found between porous alumina and graphene oxide (GO) aqueous dispersion, which promotes a fast enrichment of GO on the alumina surface and results in the formation of a GO hydrogel.     

Adsorption of adenine derivatives on a gold electrode studied by specular reflectivity measurement

The adsorption of adenine, deoxyadenosine, deoxyadenosine-5′-monophosphate,-diphosphate and-triphosphate on a gold electrode has been studied by specular reflectivity measurement in 0.1 M NaClO₄ solution. In the presence of these compounds, a marked decrease in reflectivity was found on reflectivity-potential curves in the potential region more positive than ?0.8 V vs. Ag/AgCl, the decrease being ascribed to the adsorption of them. The magnitude of change in reflectivity was dependent on both the concentration and the electrode potential. The reflectivity change observed in the negative potential region was analyzed quantitatively according to the procedure previously described. The results were elucidated on the basis of the same isotherm as used by Green and Dahms in their adsorption study of aromatic hydrocarbons, and the number of solvent molecules being replaced through the adsorption of one organic molecule and the free energy change of adsorption were obtained. The former is suggestive of a flat orientation of the adsorbed molecule in contact with its adenine moiety on the electrode surface. It is also suggested from the latter that the presence of phosphate groups leads to a decrease in ΔG_ad⁰ resulting from their hydrophilic properties and a repulsive interaction between these groups and the negative charges on the surface.     

Supramolecular nanopatterns self-assembled by adenine-thymine quartets at the liquid/solid interface

By means of scanning tunneling microscopy (STM), we have observed for the first time well-ordered supramolecular nanopatterns formed by mixing two complementary DNA bases: adenine (A) and thymine (T), respectively, at the liquid/solid interface. By mixing A and T at a specific mixing molar ratio, cyclic structures that were distinctly different from the structures observed by the individual base molecules separately were formed. From an interplay between the STM findings and self-consistent charge density-functional based tight-binding (SCC-DFTB) calculation method, we suggest formation of A-T-A-T quartets constructed on the basis of A-T base pairing. The formation of the A-T-A-T quartets opens new avenues to use DNA base pairing as a way to form nanoscale surface architecture and biocompatible patterned surfaces particularly via host-guest complexation that might be suitable for drug design, where the target can be trapped inside the cavities of the molecular containers.     

Alkane/Alcohol mixed monolayers at the solid/liquid interface

In this work, we present the behavior of solid monolayers of binary mixtures of alkanes and alcohols adsorbed on the surface of graphite from their liquid mixtures. We demonstrate that solid monolayers form for all the combinations investigated here. Differential scanning calorimetry (DSC) is used to identify the surface phase behavior of these mixtures, and elastic neutron incoherent scattering has been used to determine the composition of the mixed monolayers inferred by the calorimetry. The mixing behavior of the alcohol/alkane monolayer mixtures is compared quantitatively with alkane/alkane and alcohol/alcohol mixtures using a regular solution approach to model the incomplete mixing in the solid monolayer with preferential adsorption determining the surface composition. This analysis indicates the preferential adsorption of alcohols over alkanes of comparable alkyl chain length and even preferential adsorption of shorter alcohols over longer alkanes, which contrasts strongly with mixtures of alkane/alkane and alcohol/alcohol of different alkyl chain lengths where the longer homologue is always found to preferentially adsorb over the shorter. The alcohol/alkane mixtures are all found to phase separate to a significant extent in the adsorbed layer mixtures even when molecules are of a similar size. Again, this contrasts strongly with alkane/alkane and alcohol/alcohol mixtures where, although phase separation is found for molecules of significantly different size, good mixing is found for similar size species.     

Self-assembly at the liquid/solid interface: STM reveals

The liquid/solid interface provides an ideal environment to investigate self-assembly phenomena, and scanning tunneling microscopy (STM) is the preferred methodology to probe the structure and the properties of physisorbed monolayers on the nanoscale. Physisorbed monolayers are of relevance in areas such as lubrication, patterning of surfaces on the nanoscale, and thin film based organic electronic devices, to name a few. It's important to gain insight in the factors which control the ordering of molecules at the liquid/solid interface in view of the targeted properties. STM provides detailed insight into the importance of molecule-substrate (epitaxy) and molecule-molecule interactions (hydrogen bonding, metal complexation, and fluorophobic/fluorophilic interactions) to direct the ordering of both achiral and chiral molecules on the atomically flat surface. By controlling the location and orientation of functional groups, chemical reactions can be induced at the liquid/solid interface, via external stimuli, such as light, or by controlled manipulation with the STM tip. The electronic properties of the self-assembled physisorbed molecules can be probed by taking advantage of the operation principle of STM, revealing spatially resolved intramolecular differences within these physisorbed molecules.     

Dynamics of CO at the solid/liquid interface studied by modeling and simulation of CO electro-oxidation on Pt and PtRu electrodes

We consider theoretical models for CO monolayer oxidation on stepped Pt single-crystal electrodes and Ru-modified Pt(111) electrodes. For both systems, our aim is to assess the importance of CO surface diffusion in reproducing the experimental chronoamperometry or voltammetry. By comparing the simulations with the experimental chronoamperometric transients for CO oxidation on a series of stepped Pt surfaces, it was concluded that mixing of CO on the Pt(111) terrace is good, implying rapid diffusion (N. P. Lebedeva, M. T. M. Koper, J. M. Feliu and R. A. van Santen, J. Phys. Chem. B, submitted). We discuss here a more detailed model in which the CO adsorbed on steps is converted into CO adsorbed on terraces as the oxygen-containing species occupy the steps (as observed experimentally on stepped Pt in UHV), followed by a subsequent oxidation of the latter, to reproduce the observed chronoamperometry on stepped surfaces with a higher step density. On Ru-modified Pt(111), the experimentally observed splitting of the CO stripping voltammetry into two stripping peaks, may suggest a slow diffusion of CO on Pt(111). This apparent contradiction with the conclusions of the experiments on stepped surfaces, is resolved by assuming a weaker CO binding to a Pt atom which has Ru neighbors than to "bulk" Pt(111), in agreement with recent quantum-chemical calculations. This makes the effective diffusion from the uncovered Pt(111) surface to the perimeter of the Ru islands, which are considered to be the active sites in CO oxidation electrocatalysis on PtRu surfaces, very slow. Different models for the reaction are considered, and discussed in terms of their ability to explain experimental observations.     

Ion-association aggregation of an anionic porphyrin at the liquid/liquid interface studied by second harmonic generation spectroscopy

Interfacial ion-association adsorption and aggregation of a water-soluble porphyrin, tetrakis(4-sulfonatephenyl)porphyrin (TPPS) diacid, which was promoted by a cationic cetyltrimethylammonium ion (CTA(+)), was studied by second harmonic generation (SHG) spectroscopy. Comparing the interfacial SH spectrum with the transmission absorption spectrum of TPPS in the aqueous solution elucidated the aggregation behavior of TPPS at the heptane/water interface. The time-dependent SHG spectra for TPPS aggregation and the interfacial tension lowering in the presence of CTA(+) were discussed on the basis of an electrostatic adsorption model. Then, it was suggested that TPPS diacid was highly concentrated by the ion-association with CTA(+) at the interface, which was the intermediate state before the final aggregated state.     

Tuning molecular orientation with STM at the solid/liquid interface

Triptycene molecular orientation has been tuned with a STM tip at a Cu(111) surface in solution from flat, to tilt, to vertical. The tuning is completely bias dependent and reversible. The study is important in the fields of nanoscience and technology.     

Two-dimensional self-assembly of linear molecular rods at the liquid/solid interface

We report on the synthesis and scanning tunneling microscopy (STM) studies of a series of linear molecular rods (1-5) comprising different numbers and/or spatial arrangements of perfluorinated benzene and benzene subunits interlinked with diacetylenes in the para position and decorated with or without terminal dodecyl chains. The molecules organize themselves into well-ordered 2D crystal structures at the liquid/solid interface through intermolecular and molecule-substrate interactions. Whereas the molecules substituted by dodecyl chains form the lamellar structures with alternating rigid core rows and alkyl chain rows, the unsubstituted ones change the orientation of the rigid backbones with respect to the lamellar axis. The molecular arrangement is not influenced by fluoro substituents on any phenyl ring of the backbone, which suggests that the interactions between the π-conjugated backbones are dominated by close packing rather than by the dipole moments of the rods or fluorine-based intermolecular interactions.     

LB films of rodlike phthalocyanine aggregates: specular X-ray reflectivity studies of the effect of interface modification on coherence and microstructure

We present here X-ray specular reflectivity (XRR) characterization of the ordering of Langmuir-Blodgett films of the liquid crystalline phthalocyanine (Pc) 2,3,9,10,16,17,23,34-octakis(2-benzyloxyethoxy)copper(II) phthalocyanine, 1, on Si(100) wafers with a native oxide layer and these same substrates modified with monolayers of varying percentages of methyl- and phenyl-terminated silanes. The central copper atom in these Pc's provides for high contrast in X-ray reflectivity for single-bilayer films of 1. The XRR data are modeled as arising from multiple layers of organic material, above and below the rows of copper atoms in the aligned Pc cores; variations in the total thickness of these films, and the spacing between the rows of copper atoms, are attributed to changes in the interaction with the substrate, and changes in the Pc orientation and side chain packing. The most pronounced effect on these parameters comes from variations in the ratio of the phenyl-silane versus methyl-silane content of the substrate modifiers and annealing of these films past their crystalline (K) --> liquid crystalline (LC) mesophase transition temperature. Transfer of multiple bilayers of this Pc leads to additional changes in the thickness of each layer, eventually forming a hexagonal close-packed array, reminiscent of bulk fibers of this material, as revealed by X-ray diffraction (XRD).     

Dynamic behaviour of hydrosoluble polymers at a solid/liquid interface

The behaviour of flexible hydrosoluble polymers of high molecular weight: polyacrylamide and two polyacids, poly(α, L-glutamic acid) and a copolymer of maleic acid was investigated in the context of their dynamic behaviour at solid/liquid interfaces. The adsorption rate is related to the structure of the surface in terms of remaining interacting surface sites. The desorption rate was measured by carrying out adsorption with radioactive labelled polymers, followed by exchange with unlabelled polymers. The slow exchange rate observed suggests a metastable equilibrium state owing to strong multisegment adsorption in the potential well of the surface. However, the “diffuse” polymer layer formed by loops which extend in the aqueous phase within distances of several hundred Angstroms “responds” reversibly to a change in the solvent composition. The latter effect was found by recording the hydrodynamic permeability of pores covered by the adsorbed polymer; the permeability to fluid flow is very sensitive to the loop layer thickness.     

Dynamic behavior of flexible polymers at a solid/liquid interface

The mean time spent by a macromolecule at a solid/liquid interface is analyzed in the region of adsorption saturation. The method consists of carrying out preliminary adsorption with radioactively labeled high-molecular-weight polyacrylamide and subsequently exposing the surface to a solution of unlabeled polyacrylamide. It was found that, apart from a small fraction of polymers “loosely” attached, the exchange between labeled and unlabeled polymers takes place at the interface at a very slow rate. Furthermore, desorption of surface molecules occurs only in the presence of a solution, and then the rate of desorption increases proportionally to the number of molecules in the solution. A mechanism based on a bimolecular chemical exchange process is proposed.     

Molecular patterning at a liquid/solid interface: the foldamer approach

Molecular patterning has received a lot of attention in the past decade; however, the functionalization of these surface-confined 2D patterns on the nanoscale level remains a challenge. Assembling 2D patterns from oligomeric foldamers turns out to be an interesting approach to accomplishing the controlled positioning of functional elements. We designed a family of peptidomimetic foldamers bearing a 2D turn element folding at the liquid/solid interface. The turning element was developed while studying derivatives with one turning unit. Furthermore, folding was found to be induced by the confinement of the surface. This achievement paves the way for the design of foldamers with multiple turns, providing a higher versatility in the functionalization of nanopatterns.     

Kinetic comparison between ferric ion and decamethyferrocene at the liquid/liquid interface as studied by scanning electrochemical microscopy

<正>Comparison in electron transfer(ET) processes from decamethyferrocene(DMFe) in nitrobenzene(NB) to ferric ion in aqueous phase was investigated for the first time by the scanning electrochemical microscopy(SECM).As compared with the system of Fe(CN)_6~(3-)-DMFe,the ET rate obtained from Fe~(3+)-DMFe was lower in spite of larger driving force,which may arise from the effect of reorganization energy.Otherwise,the effect of common ion on rate constants was also probed and results suggested additional complexity of the ET mechanism between Fe(CN)_6~(3-) and DMFe.