Sorption onto insoluble β-cyclodextrin polymer for 2,4-dinitrophenol

The sorption of β-cyclodextrin polymer (β-CDP) towards 2,4-dinitrophenol (2,4-DNP) in aqueous solutions was investigated. The influence of sorption conditions including initial 2,4-DNP concentration, contact time and pH on sorption capability were discussed. The sorption isotherm can be correlated to Freundlich model. The maximum sorption capacity of 2,4-DNP for β-CDP was measured to be 192?mg/g with the initial concentration at 1,000?mg/L at 303?K. The β-CDP was easily recovered by ethanol as washing solvent and they could be used as a kind of recyclable sorbents.     

A New Synthetic Route for 2,4-Dibromo-5-fluorobenzoic Acid

Fluoroquinolonesareeffectivemedicinesagainstbacteria,evenagainsttumor.Overtenexcellentfluoroquinol0nemedicineshavebeen0nthemarket.Duet0thehigherselectivity,yieldatbrondnationof3-flu0rotoluenethanchlorination,and0theradvantages'-',2,4-dibromo-5-flu0r0benzoicacidhasreplaced2,4-dichloro-5-fluor0-benzoicacidandbecomethekeystartingmaterialofpreparingfluoroquinoIonemedicines'.S0itisofgreatsignificancetofindaneffectivesyntheticpathfor2,4-dibromo-5-fluor0benz0icacid.Therehavebeenproposedtwomethodsf0r…     

Die 2,4-Dinitrophenylhydrazone von ges?ttigten Aldehyden, ges?ttigten Methylketonen, 2-Enolen und 2,4-Dienolen

Ohne Zusammenfassung     

Synthesis of (E) α,2,4-Trinitrostilbenes from (E) 2,4-Dinitrostilbenes

Abstract

A convenient synthesis of (E) α,2,4-trinitrostilbenes 2a–d from (E) 2,4-dinitrostilbenes la–e by direct nitration is reported. Isomerization of the trans geometry of the reactant stilbenes to cis in the products was found. The structures of stilbenes 2a, 2c and 2d were confirmed by XRD.     

Improved Procedure for the Preparation of cis‐2,4‐Dimethylglutaranhydride

Addition of 2.5 mol% DBU to a mixture of isomeric 2,4‐dimethylglutaric anhydrides in ethyl acetate promotes crystallization‐induced transformation, affording the pure cis‐2,4‐dimethylglutaric anhydride in 87% yield.     

Immune Complex Transfer Enzyme Immunoassay for Anti-Thyroglobulin IgG Using 2,4-Dinitrophenyl-thyroglobulin,Biotinyl-thyroglobulin and Streptavidin-β-D-galactosidase Conjugate

Abstract

A sensitive enzyme immunoassay (immune complex transfer enzyme immunoassay) for anti-thyroglobulin IgG in serum is described. Anti-thyroglobulin IgG in serum was reacted simultaneously with 2,4-dinitrophenyl-thyroglobulin and biotinyl-thyroglobulin. The immune complex formed of the three components was trapped onto polystyrene balls coated with (anti-2,4-dinitrophenyl group) IgG and, after washing, reacted with streptavidin-β-D-galactosidase conjugate. After washing, the immune complex was eluted from the polystyrene balls with εN-2,4-dinitrophenyl-L-lysine and transferred to polystyrene balls coated with (anti-human IgG γ-chain) IgG. β-D-Galactosidase activity bound to the last polystyrene balls was assayed by fluorometry. Biotinylthyroglobulin and streptavidin-β-D-galactosidase conjugate could be prepared more easily than thyroglobulin-β-D-galactosidase conjugate used in the previous immunoassay. Inactive β-D-galactosidase, used to eliminate interference by anti-β-D-galactosidase antibodies in the previous immunoassay, was not required. The present immunoassay was 300-fold more sensitive than the conventional enzyme immunoassay, although 10-fold less sensitive than the previous immunoassay. Antithyroglobulin IgG was demonstrated in all patients with autoimmune thyroid diseases and 54% of healthy subjects.     

A Facile Method for the Preparation of Pure cis‐2,4‐Pentanediol

Abstract

The isolation of diastereomerically pure cis‐2,4‐pentanediol from a crude mixture of both cis‐ and trans‐2,4‐pentanediols is described through a short procedure involving thermodynamic acetal formation with acetophenone, followed by hydrogenolysis of the acetal protecting group.     

An improved procedure for the generation and selective trapping of 2,4′-dilithiophenylethyne

2,4′-Dilithiophenylethyne, prepared by treatment of 4-bromophenylethyne with two equivalents of butyllithium, reacts selectively with electrophilic reagents at the 4′-position provided the correct temperature and solvent combination are employed. The successive addition of two different electrophiles gives the 2,4′-dialkylated product in a regioselective manner.     

Synthesis,characterization, and visible light–induced photocatalytic evaluation of WO3/NaNbO3 composites for the degradation of 2,4-D herbicide

In this research study, WO₃/NaNbO₃-coupled photocatalysts were synthesized at three WO₃ mass ratios (15, 85, and 95 wt%) and characterized. These composites were characterized via X-ray powder diffraction, N₂ physisorption, UV–Vis diffuse reflectance spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, transmission electron microscopy, and photoluminescence techniques. For comparison, bare WO₃ and NaNbO₃ were also synthesized and characterized. 2,4-Dichlorophenoxyacetic acid (2,4-D) was degraded under visible light to evaluate its photocatalytic performance. The WO₃ (95 wt%)/NaNbO₃ composite showed higher photocatalytic activity than pure WO₃ and NaNbO₃ and even than the 15 and 85 wt% coupled materials; thus, the combination with the highest ratio of WO₃ with respect to NaNbO₃ showed increased photocatalytic activity compared with the bare materials.     

The roughened silver–palladium cathode for electrocatalytic reductive dechlorination of 2,4-Dichlorophenoxyacetic acid

The roughened silver–palladium (Pd/Ag(r)) electrode was fabricated by a convenient metallic replacement reaction, and its electrocatalytic property towards reductive dechlorination of 2,4-Dichlorophenoxyacetic acid (2,4-D) in basic aqueous solution have been evaluated. Experimental evidence is presented that Pd/Ag(r) exhibited powerful electrocatalytic activity for dechlorination of 2,4-D. In addition, a new dechlorination mechanism of 2,4-D was proposed, in which the formation of adsorbed 2,4-D on Ag is a key step.     

Tetrablock Copolymers Based on Oligoether Diols, 2,4-toluene diisocyanate,Isophorone Diisocyanate,and Methylene-bis-о-chloroaniline

Tetrablock polyurethane ureas with mixed soft segments and dissimilar hard urethane urea blocks, based on oligo(propylene oxide)diol, oligo(tetramethylene oxide)diol, 2,4-toluene diisocyanate, isophorone diisocyanate, and methylene-bis-o-chloroaniline as a low-molecular-mass chain extender were synthesized and studied. The fragmentary ordering of the polymer chains of the new polyurethane urea was proved by rheokinetic data. The structure–property relationship for the polymer was found. The new polyurethane ureas surpass in the true strength the available diblock polyurethane ureas with poly(propylene oxide) soft segments by a factor of 1.5. The strength properties of the new tetrablock polyurethane ureas only weakly depend on the strain rate varied in the range 0.56–0.006 s^–1.

     

REACTION OF HINDERD α,β - UNSATURATED KETONES WITH 2,4-BIS(4-METHOXYPHENYL)-1,3,2,4- DITHIADIPHOSPHETANE-2,4-DISULFIDE

Abstract

Six new hindered α,β-unsaturated ketones (22c-h) were prepared. Though the reaction of α,β-unsaturated ketones (22a,b) with 2,4-bis(4-methoxyphenyl)-1,3,2,4-dithiadiphosphet-ane-2,4-disultide (23) in refluxing benzene gave the corresponding 2-arylidene-1-thiotetral-one dimers (26a,b) and 3H-1,2-thiaphospholene-2-sulfides (28a,b), the reaction of hindered α,β-unsaturated ketones (22d-h) with 2,4-bis(4-methoxyphenyl)-1,3,2,4-dithiadiphosphet-ane-2,4-disultide (23) in retluxing benzene gave only identified 3H-1,2-thiaphospholene-2-sulfides (28c-g).     

Crystal Structures and Spectroscopy of Anti-2,4-bis（3-R-phenyl）pentane-2,4-diols （R = Me, SMe）

Two anti-2,4-bis(3-R-phenyl)pentane-2,4-diols (1, R = Me; 2, R = SMe) have been synthesized and were characterized by X-ray diffraction, IR and UV spectra. X-ray diffractions indicate that intra- and intermolecular hydrogen bonding interactions form one-dimensional (1D) ribbons. The adjacent infinite 1D ribbons result in 3D supramolecular structures. The dihedral angles between every two benzene rings in the two diols are 31.61(12) and 31.80(7)°, respectively. UV absorption spectra of the title compounds were recorded in MeOH, C2H5OH, CH3CN, n-BuOH and cyclohexane solvents with different dielectric constants.     

Die Chromatographie der 2,4-Dinitrophenylhydrazone einiger Ketone, Aldehyde und Ketos?uren

Ohne Zusammenfassung     

1,3-Diphosphetane-2,4-diyles--Cryptocarbenes?

1,3-Diphosphetane-2,4-diyles ( A ) possess a diradical molecular structure. Experimental studies reveal interconversions of different valence isomers of the diradicals. As a consequence of the facile thermal ring opening of 1,3-diphosphetane-2.4-diyles A , we obtained crypto-phosphinocarbenes ( B ), confirmed by the results of intramolecular rearrangements as well as reactions with multiple bonded systems. A new range of five- and six-membered phosphorus heterocycles are isolated, including transition-metal complexes. The mechanism for the ring-expansion are predicted by quantum chemical calculations.     

Über das 2,4-Dimethylphloroglucin

Ohne Zusammenfassung     

Preparation and characterization of 2,4–D butyl ester capsule suspension for mitigation of its drift risk

A novel capsule suspension (CS) formulation was prepared by in situ polymerization of melamine formaldehyde (MF) resin which was the first time to be used to encapsulate 2,4–D butyl ester. The prepared 2,4–D butyl ester capsule suspensions were studied by ultraviolet spectrophotometer (UV), laser particle size analyzer, Optical microscopy (OM), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Results showed that the encapsulation efficiency reached 93.23%, and the mean particle size (D₅₀) could be reduced to 13.80 µm by adding 4% Tween80. OM and SEM images illustrated that the core-shell structure related largely to the stability of emulsion. The spherical microcapsules possessed with rougher outer surface and the shell was about 1.5-2.0 µm thick with good methanol tolerance. Then, the formation of pre-polymer, shell material and microcapsules were revealed by FT-IR. Finally, experiments showed that the 2,4–D butyl ester CS exhibited a sustained releasing behavior in water, which could reach to 14 days.     

Poly[3,3-bis(azidomethyl)oxetane]–2,4-dinitro-2,4-diazapentane

Constructing phase diagrams for the mixtures of semicrystalline polymers and low molecular mass substances by DSC can meet with difficulties in the case of slow polymer crystallization. A problem of this kind is encountered for high-energy compositions poly[3,3-bis(azidomethyl)oxetane] (PBAMO)–2,4-dinitro-2,4-diazapentane (DNAP). In this study, the experimental phase diagram PBAMO–DNAP is constructed by an optical method, which makes it possible to visualize structural transformations. The kinetic studies by DSC and XRD reveal that 30–50 days of storing a homogenized PBAMO–DNAP mixture at room temperature are needed to attain stationary values of the crystallinity degree and heat of fusion. Even after that, the DSC method cannot deliver a solubility curve of DNAP in PBAMO, which is naturally generated by the optical method. This curve separates a domain of physical gels, effectively crosslinked by polymer crystallites and swollen with the plasticizer molecules, from a two-phase domain, in which the above gel reaches osmotic equilibrium with the pure plasticizer. It is also shown that the melting temperature of DNAP drops with growing the PBAMO content in the mixture, which is consistent with a decrease in the mean size of plasticizer crystals formed in polymer pores during the previous cooling.