Cone di-ionisable calix[4]arene-1,3-crown-5 ligands with elongated pendant side arms: synthesis and metal ion extraction

Abstract

Syntheses of p-H-calix[4]arene-1,3-crown-5 and p-tert-butylcalix[4]arene-1,3-crown-5 ligands with two elongated, proton-ionisable side arms in the cone conformation are described. For solvent extractions from aqueous solution into chloroform, the influence of lengthening the lower rim proton-ionisable side arms and addition of para substituents to the upper rim of the calix[4]crown scaffold on the efficiency and selectivity of metal cation solvent extraction are evaluated.     

Di-ionizable p-tert-butylcalix[4]arene-1,2-crown-3 ligands in cone and 1,2-alternate conformations: synthesis and metal ion extraction

Novel di-ionizable p-tert-butylcalix[4]arene-1,2-crown-3 ligands in cone and 1,2-alternate conformations were prepared as potential metal ion extractants. Selective bridging of proximal hydroxyl groups of the calix[4]arene platform by a crown-3 polyether unit was achieved under Mitsunobu reaction conditions. In addition to the carboxylic acid group, the acidity tunable N-(X)sulfonyl oxyacetamide functions [OCH(2)C(O)NHSO(2)X] with X group variation from methyl to phenyl to p-nitrophenyl to trifluomethyl were used as the proton-ionizable groups. Conformations and regioselectivities of the new ligands were established by (1)H and (13)C NMR spectroscopy. Competitive solvent extractions of alkali metal cations and of alkaline earth metal cations from aqueous solutions into chloroform were performed, as were single species extractions of lead(ii) and mercury(ii).     

Di-ionizable p-tert-butylcalix[4]arene-1,2-crown-5 and -crown-6 compounds in the cone conformation: synthesis and alkaline earth metal cation extraction

Di-ionizable p-tert-butylcalix[4]arene-1,2-crown-5 and -crown-6 ethers in the cone conformation were prepared and their conformations and regioselectivities were verified by NMR spectroscopy. The metal ion-complexing properties of these ligands were evaluated by competitive solvent extractions of alkaline earth metal cations from water into chloroform. The ligands were found to be efficient extractants with selectivity for Ba(2+). The maximal loadings were 95-100% as calculated for formation of 1 : 1 ionized ligand-metal ion complexes. With the variation of proton-ionizable groups, which were oxyacetic acid moieties and N-(X)sulfonyl oxyacetamide units with X = methyl, phenyl, 4-nitrophenyl, and trifluoromethyl, "tunable" acidity was obtained.     

Di-ionizable calix[4]arene-1,2-crown-5 and -crown-6 ethers in cone conformations: synthesis and divalent metal ion extraction

Two series of di-ionizable calix[4]arene-1,2-crown-5 and -crown-6 ethers in cone conformations are synthesized. The ionizable groups are oxyacetic acid moieties and N-(X)sulfonyl oxyacetamide units with X=methyl, phenyl, 4-nitrophenyl, and trifluoromethyl, which ‘tunes’ their acidity. For competitive solvent extraction of alkaline earth metal cations from aqueous solutions into chloroform, the new ligands with N-(X)sulfonyl carbamoyl groups are efficient extractants with Ba²⁺ selectivity. On the other hand, the dicarboxylic acid analogues exhibit little selectivity in extraction of alkaline earth metal cations. For single species extractions of Pb²⁺, the ligands with both types of ionizable groups show very good extractions abilities. In single species extractions of Hg²⁺, the N-(X)sulfonyl carboxamide ligands are highly efficient, in contrast to the dicarboxylic acid compounds. Influences of the ionizable group identity, the crown ether ring size, and the presence of upper-rim p-tert-butyl groups on divalent metal ion extraction are explored.     

Di-ionizable calix[4]arene-1,3-crown-4 ligands in 1,3-alternate,cone, and partial-cone conformations: synthesis and metal ion extractions

Di-ionizable calix[4]arene-1,3-crown-4 compounds locked in 1,3-alternate, cone, and partial-cone conformations are synthesized for evaluation in metal ion separations. The ionizable functions include carboxylic acid and N-(X)sulfonyl carboxamide groups in which the acidity is tuned by variation of the electron-withdrawing ability of X. Similar synthetic routes were employed for preparation of the cone and 1,3-alternate ligand series. A different preparative route utilizing protection and deprotection was required to obtain the partial-cone analogues. Ligand conformations were confirmed by their proton and/or carbon NMR spectra. X-ray diffraction verified an unusual 1,2-alternate conformation in the solid-state for one synthetic intermediate. Effects of ligand conformation and ionizable group variations on competitive solvent extractions of alkali and alkaline earth metal cations from aqueous solutions into chloroform were assessed. Single species solvent extractions of Hg²⁺ and Pb²⁺ were also performed.     

Di-ionizable p-tert-butylcalix[4]arene-1,2-monothiacrown-3 ligands in the cone conformation: synthesis and metal ion extraction

A series of di-ionizable calix[4]arene-1,2-crown-3 compounds with a sulfur-containing unit bridging the proximate phenolic oxygens have been synthesized. The ionizable groups are oxyacetic acid and N-(X)sulfonyl oxyacetamide groups with X=methyl, phenyl, 4-nitrophenyl, and trifluoromethyl, which ‘tunes’ the acidity of the latter. The efficiency and selectivity of these novel ligands are assessed for competitive solvent extractions of alkali metal cations and of alkaline earth metal cations from aqueous solutions into chloroform. Also the efficiencies for single species extractions of Pb²⁺ and of Hg²⁺ are determined. The results are compared with those reported previously for related ligands in which only oxygen heteroatoms are present in the crown ether unit.     

Metal ion complexation in acetonitrile by cone,di-ionised calix[4]arene-1,2-crown ethers with two pendant dansyl fluorophores

Four cone calix[4]arene-1,2-crown ethers each with two ionisable side arms containing dansyl groups are synthesised. The crown ether ring on the lower rim is varied from crown-4 to crown-5 with hydrogen or tert-butyl groups on the para position of the upper rim. Di(tetramethylammonium) salts of the di-ionised ligands are utilised for spectrofluorimetric titration experiments in MeCN. The influence of alkali metal, alkaline earth metal and selected transition and heavy metal (Co²⁺, Fe²⁺, Hg²⁺, Mn²⁺, Pb²⁺, Zn²⁺ and Fe³⁺) cations on the spectroscopic properties of the two dansyl groups linked to the lower rim of the conformationally locked, di-ionised calix[4]arene-1,2-crown ether frameworks is investigated by emission spectrophotometry. All of the metal cations induce red shifts in the emission spectra of the di-ionised ligands. The metal cations produce enhancement or quenching of the fluorescence emissions. Changes in the fluorescence emission as a function of the metal cation identity, the lower rim crown ether ring size and the absence or presence of upper rim tert-butyl groups are investigated.     

Synthesis and alkaline earth metal cation extraction by proton di-ionizable p-tert-butylcalix[4]arene-crown-5 compounds in cone, partial-cone and 1,3-alternate conformations

Synthetic strategies for novel, proton di-ionizable p-tert-butylcalix[4]arene-crown-5 compounds in cone, partial-cone and 1,3-alternate conformations are reported. Selective linkage of the two diametrical phenolic oxygens in p-tert-butylcalix[4]arene with tetraethylene glycol ditosylate gave 1,3-bridged p-tert-butylcalix[4]arene-crown-5. The two remaining phenolic units were alkylated using NaH and KH as the bases to give the cone and partial-cone conformers, respectively. Preparation of the 1,3-alternate conformers utilized a different sequence in which O-alkylation was followed by crown ether ring formation. Structures of these new ligands were elucidated by (1)H and (13)C NMR spectroscopy. These proton-ionizable ligands were tested for their solvent extraction properties toward alkaline earth metal cations. Surprising differences in their extraction behaviors are noted compared to those reported previously for di-ionizable p-tert-butylcalix[4]arenecrown-6 analogues.     

Di-ionizable p-tert-butylcalix[4]arene-1,3-crown-4 ligands: synthesis and alkaline earth metal cation extraction

A series of di-ionizable calix[4]arene-1,3-crown-4 compounds has been synthesized. The ionizable groups are oxyacetic acid and N-(X)sulfonyl oxyacetamide groups with X=methyl, phenyl, 4-nitrophenyl and trifluoromethyl, which ‘tunes’ the acidity of the latter. The efficiency and selectivity of these novel ligands are assessed with competitive solvent extractions of alkaline earth metal cations from aqueous solutions into chloroform. The results are compared with those reported previously for calix[4]arene-crown analogues with crown-6 and crown-5 rings.     

Allosteric bindings of thiacalix[4]arene-based receptors with 1,3-alternate conformation having two different side arms

A novel ditopic receptor possessing two complexation sites such as crown ether and 2-pyridylmethyl groups bearing 1,3-alternate conformation based on thiacalix[4]arene was prepared. The binding behaviors with Li⁺ and Ag⁺ have been examined by ¹H NMR titration experiment. The exclusive formation of mononuclear complexes of 1,3-alternate-5 with Li⁺ and Ag⁺ was observed even though the formation of the heterogeneous dinuclear complexes was expected. The decomplexation of Li⁺ from the crown moiety of 1:1 complex 1,3-alternate-5?Li⁺ to form the Ag⁺?1,3-alternate-5 complex by addition of AgSO₃CF₃ clearly shows that pyridyl moiety works as an efficient switch-off of the recognition ability of the crown moiety. We have also developed the construction of hydrogen-bonding self-assembly heterodimeric systems based on bis(4-pyridyl) and dicarboxylic acid thiacalix[4]arene derivatives in 1,3-alternate conformation. Their supramolecular behaviors are studied by ¹H NMR titration experiments with K⁺ and Ag⁺ ions. Although the values of the dimerization constants are relatively small, the stability of the dimers is strong enough to overcome only small conformational changes upon complex formation.     

Di-ionizable p-tert-butylcalix[4]arene-1,2-crown-4 ligands: synthesis and high divalent metal ion extraction selectivity

Di-ionizable p-tert-butylcalix[4]arene-1,2-crown-4 ethers in the cone conformation are synthesized with their conformation and regioselectivity verified by NMR spectroscopy. The new ligands are efficient extractants with high selectivity for Ba²⁺ in competitive solvent extraction of alkaline earth metal cations from aqueous solutions into chloroform.     

3-[N-(4-甲基苯基)氨基羰基]-5-[4-(4-甲酸基苯甲氧基)苯亚甲基]-2,4-噻唑烷二酮的合成

以对甲苯胺和对甲基苯甲酸甲酯为起始原料,经NBS溴化、亲核取代、酸水解和Knoevenagel缩合等6步反应合成了抗细菌生物膜化合物—3-[N-(4-甲基苯基)氨基羰基]-5-[4-(4-甲酸基苯甲氧基)苯亚甲基]-2,4-噻唑烷二酮,总收率57.3％,其结构经1H NMR,ESI-MS和元素分析确证.     

Solvent extraction of barium picrate by p-tert-butylcalix[4]arene-tetrakis (N,N-diethylacetamide)

Summary From extraction experiments andg-activity measurements, the extraction constant of the Ba²⁺(aq)+2A^-(aq)+L(nb)?BaL²⁺(nb)+2A^-(nb) equilibrium in the two-phase water-nitrobenzene system (L = p-tert-butylcalix[4]arene-tetrakis (N,N-diethylacetamide); aq = aqueous phase, nb = nitrobenzene phase) was evaluated as logK_ex(BaL²⁺,2A^-)=6.5±0.1. Furthermore, the stability constant of the p-tert-butylcalix[4]arene-tetrakis (N,N-diethylacetamide)̵barium complex in nitrobenzene saturated with water was calculated for at 25 °C as logb_nb(BaL²⁺)=15.4±0.1.     

Metal ion catalysis in the beta-elimination reactions of N-[2-(4-pyridyl)ethyl]quinuclidinium and N-[2-(2-pyridyl)ethyl]quinuclidinium in aqueous solution

Catalysis of the beta-elimination reaction of N-[2-(4-pyridyl)ethyl]quinuclidinium (1) and N-[2-(2-pyridyl)ethyl]quinuclidinium (2) by Zn(2+) and Cd(2+) in OH(-)/H(2)O (pH = 5.20-6.35, 50 degrees C, and mu = 1 M KCl) has been studied. In the presence of Zn(2+), the elimination reactions of both isomers occur from the Zn(2+)-complexed substrates (C). The equilibrium constants for the dissociation of the Zn(2+)-complexes are as follows: K(d) = 0.012 +/- 0.003 M (isomer 1) and K(d) = 0.065 +/- 0.020 M (isomer 2). The value of k(C)(H2O) for isomer 1 is 4.81 x 10(-6) s(-1). For isomer 2 both the rate constants for the "water" and OH(-)-induced reaction of the Zn(2+)-complexed substrate could be measured, despite the low concentration of OH(-) in the investigated reaction mixture [k(C)H2O)= 1.97 x 10(-6) s(-1) and k(C)(OH-)= 21.9 M(-1) s(-1), respectively]. The measured metal activating factor (MetAF), i.e., the reactivity ratio between the complexed and the uncomplexed substrate, is 8.1 x 10(4) for the OH(-)-induced elimination of 2. This high MetAF can be compared with the corresponding proton activating factor (Alunni, S.; Conti, A.; Palmizio Errico, R. J. Chem. Soc., Perkin Trans. 2 2000, 453), PAF = 1.5 x 10(6) and is in agreement with an E1cb irreversible mechanism (A(xh)D(E)* + D(N)) (Guthrie, R. D.; Jencks, W. P. Acc. Chem. Res. 1989, 22, 343). A value of k(C)(H2O)>or= 23 x 10(-7) s(-1) is estimated for the Cd(2+)-complexed isomer 2, while catalysis by Cd(2+) has not been observed for isomer 1.     

Solvent extraction of uranium(VI) by p-tert-butylcalix[n]-arene acetate

The solvent extraction of U(VI) by p-tert-butylcalix[n]-arene acetate (H _n L) (n=4, 6, 8) has been studied. The effects of acidity in aqueous phase and concentration of extractant in organic phase on the distribution ratio were examined. It has been found that the distribution ratio is proportional to [H⁺]⁻² and [H _n L]_(O) and the extracted complex species is UO₂H _n ⁻²L. The equilibrium constants of the extraction reactions have been determined. The reaction mechanism is discussed.     

Cu+ and Pt2+ complexes with a p-tert-butylcalix[4]arene fitted with two phosphine pendant arms

Reaction of 5,11,17,23-tetra-tert-butyl-25,27-dihydroxy-26,28-bis[{N-(2-diphenyl phosphino)phenyl}carboxyamidemethoxy]calix[4]arene with [Cu(CH₃CN)₄]ClO₄ and Pt(COD)Cl₂ gave two new complexes (1 and 2, respectively). Their structures were determined by X-ray analysis. Complex 1 has two seven-membered metallo-cycles and complex 2 has one five-membered metallo-cycle.     

p-tert-Butylcalix[4]arene-1,3-bis(allyloxyethoxy)ether coated capillaries for open-tubular electrochromatography.

The preparation and characterization of p-tert-butylcalix[4]arene-1,3-bis(allyloxyethoxy)ether (CA[4]-BAE) chemically coated capillaries via a free-radical reaction with vinyltriethoxysilane (VTES) that was attached onto the inner wall previously were carried out. IR spectra and decreased electroosmotic flow (EOF) suggested that the capillary was successfully coated with CA[4]-BAE. A slight slope of EOF versus pH at 5 < pH < 9 would help to make the separation reproducible. The CA[4]-BAE-coated capillary showed improved separations of toluidine isomers, naphthol isomers and polycyclic aromatic hydrocarbons (PAHs) compared with an uncoated capillary. The special selectivity indicates that there is a certain extent of host-guest interactions between the solutes and the CA[4]-BAE coating.