Catalytic enantioselective diboration of cyclic dienes. A modified ligand with general utility

The enantioselective 1,4-diboration of cyclic dienes with a new taddol-derived phosphonite ligand occurs with excellent enantioselectivity. Oxidation delivers the derived 1,4-diol, whereas homologation can be used to deliver a chiral 1,6-diol.     

Brillouin scattering and optical Kerr effect study of dimethacrylates: temperature effects

In this paper we report a temperature study of Brillouin scattering and optical Kerr effect in the ethane-1,2-diol dimethacrylate, pentane-1,5-diol dimethacrylate and hexane-1,6-diol dimethacrylate belonging to the series of dimethacrylate homologues. Using these methods we have studied the temperature behaviour of the hypersonic velocity, adiabatic compressibility and optical Kerr constant in the temperature range from 283 to 323 K.

The obtained results are compared to those obtained earlier from Brillouin scattering and optical Kerr effect experiments for butane-1,4-diol dimethacrylate and 2,2′-thiodiethyl dimethacrylate (a sulfur-containing monomer). The results are also discussed in terms of changes in the intermolecular interactions and arrangement in the liquid compounds under study.     

The flammability properties of copolyesters and copolycarbonates containing acetylenes

The flammability properties of copolyesters and copolycarbonates containing varying percentages of 2-butyne-1,4-diol and 2,4-hexadiyne-1,6-diol were studied by use of oxygen index and dynamic thermogravimetry. The char formation was found to increase with increasing polymer unsaturation. For nonconjugated acetylenes there is an increase in the oxygen index with increasing unsaturation in a polymer. In contrast, conjugated acetylenes dramatically decrease the oxygen index of a polymer system.     

A chemical study of 2-butyne-1,4-diol

Commercial grade 2-butyne-1,4-diol has been used in electroplating for several years. In laboratory experiments, its presence in the electrolyte increases the current efficiency of zinc electro-winning. Its chemical behaviour in solution is not well known. The present paper indicates that the brownish technical grade 2-butyne-1,4-diol contains the monomer, the dimer and some trimer. Pure monomeric 2-butyne-1,4-diol is a white solid obtained by evaporation of the technical grade product. The monomer is slowly transformed into dimer and possibly into a trimer when dissolved in water. Various analytical techniques were used in the study of this system. Factor analysis with column cross-validation was applied to chromatographic data to help in the resolution of the system.     

Syntheses and structures of isomeric [6.6]- and [8.8]cyclophanes with 1,4-dioxabut-2-yne and 1,6-dioxahexa-2,4-diyne bridges

All three isomers (ortho, meta, and para) of [8.8]cyclophane bearing 1,6-dioxahexa-2,4-diyne bridges have been synthesized and structually characterized by single-crystal X-ray crystallography to determine the conformation of the cyclophanes and their cavity dimensions. The three isomeric [6.6]cyclophanes bearing 1,4-dioxabut-2-yne bridges have also been synthesized from but-2-yne-1,4-diol ditosylate and the isomeric dihydroxybenzenes. The [6.6]orthocyclophane has been structurally characterized by single-crystal X-ray crystallography. The energy-minimized structures from the semiempirical AM1 calculations of these cyclophanes compare very well with the structures obtained by X-ray crystallography.     

Thermodynamic properties of linear polyurethanes based on 1,6-hexamethylenediisocyanate with butane-1,4-diol and hexane-1,6-diol in the temperature range from T → 0 to 460 K

The temperature dependences of the heat capacity of partially crystalline linear polyurethanes based on 1,6-hexamethylenediisocyanate with butane-1,4-diol and hexane-1,6-diol were studied for the first time in a temperature range of 6–460 K by the methods of adiabatic vacuum and dynamic calorimetry. Physical changes in the state of polyurethanes were revealed and characterized; the standard thermodynamic functions, namely, C _p °(T), H°(T)-H°(0), S°(T), and G°(T)-H°(0), were calculated from the obtained experimental data in the temperature range from T → 0 to 460 K for the polymers in the crystalline, glassy, highly elastic, and liquid states. The energies of combustion of the polymers were measured by the bomb calorimetry method, and the standard thermodynamic characteristics of their formation at 298.15 K were calculated. The thermodynamic characteristics of bulk polycondensation of 1,6-hexamethylenediisocyanate with butane-1,4-diol and hexane-1,6-diol to form linear aliphatic polyurethanes-{4,6} and-{6,6} were determined in the range from T → 0 to 350 K at p° = 0.1 MPa. The thermodynamic properties of the polyurethanes under study and polymers of isomeric structure were compared. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 817–823, May, 2006.     

Exploiting predisposition in the stereoselective synthesis of mono-, bi- and tetracyclic oxygen heterocycles: equilibration between,and trapping of,alternative di- and tetraacetals

The desymmetrisation of 1,4-difuran-2-ylbutane-1,4-diol by Sharpless asymmetric oxidation gave the corresponding desymmetrised product in > 96% ee. However, the product existed as a mixture of two interconverting isomers, both of which were mixtures of anomers. The product could be trapped in high yield with a range of reagents to give stable adducts with embedded pyran-3-one, 1,6-dioxaspiro[4.5]decane or pyrano[3,2-b]pyran ring systems. The strategy was also applied in the interconversion between alternative tetracycles and, under acidic conditions, this process was thermodynamically controlled. The selectivity of the process was rationalised by molecular modelling using the HF/6-31G* parameter set.     

Chelation-Controlled Regioselection in Palladium-Catalyzed Carbonyl Allylation by 4-Pentene-1,3-Diol or Its Cyclic Carbonate

With cat. PdCl₂(PhCN)₂ and SnCl₂, 4-pentene-1,3-diol caused regioselective carbonyl allylation at 3-position in DMF to produce 2-substituted 3-vinyltetrahydrofurans and/or 1-substituted 2-vinylbutane-1,4-diols, and cyclic carbonate of 4-pentene-1,3-diol caused regioselective carbonyl allylation at terminal 5-position in THF to produce 1-substituted 3-hexene-1,6-diols.     

酶促Michael-aldol串联反应合成四氢噻吩类化合物

在水介质和40℃条件下,碱性蛋白酶催化2,5-二羟基-1,4-二噻烷与N-苯基马来酰亚胺间的Michael-aldol反应,合成了四氢噻吩类化合物,反应取得了93%的产率及3∶1的非对映选择性。该方法具有反应条件温和、反应时间短、后处理简单等优点。     

一种简便合成2-丁炔-1,4-二醇衍生物的新方法

由2-丁炔-1,4-二醇可以很方便地得到2-丁炔-1,4-二氯,这一试剂在有机合成中有着广泛的应用。而在其它条件相同的情况下,制备2-丁炔-1,4-二溴并未得到相应较好的结果。我们用无水苯为反应溶剂,以温和的 (PPh3)PBr2作为卤代试剂(冰浴下液溴逐滴滴入PPh3苯溶剂中当场生成)卤化2-丁炔-1,4-二醇,选择性合成得到2-丁炔-1,4-二溴衍生物。同时也实现了2-丁炔-1,4-二醋酸酯的合成。     

Conformation inversion of an inositol derivative by use of silyl ethers: a modified route to 3,6-di-O-substituted-L-ido-tetrahydroxyazepane derivatives

The trans-diequatorial 3,4-diol of 2,5-di-O-benzyl-D-chiro-inositol cleaved selectively with the periodate ion in the presence of the trans-diaxial 1,6-diol to give a dialdehyde (dialdose) from which 3,6-di-O-benzyl-D-manno-tetrahydroxyazepane (1) was made. The trans-diaxial 1,6-diol of 3,4-di-O-allyl-2,5-di-O-benzyl-D-chiro-inositol was not cleaved satisfactorily by periodate, but replacement of the allyl substituents with tert-butyldimethylsilyl groups caused conformational inversion of the inositol ring, and the resulting trans-diequatorial 1,6-diol cleaved efficiently to give a dialdehyde from which 3,6-di-O-benzyl-L-ido-tetrahydroxyazepane (2) can be prepared.     

Effect of structure on the thermal degradation and flame retardancy of hexolic anhydride based polyesters

Based on the anhydrides like hexolic (5,6,7,8,10,10-hexachloro -3a,4,4a,5,8,8a,9,9a-octahydro-5,8-methanonaphtho-[2,3-c]-furan-1,3-dione), maleic and phthalic and diols like 1,4-butanediol, cis-2-butene-1,4-diol and 2,3-dichloro-2-butene-1,4-diol, a family of polyesters has been synthesized using azeotropic condensation technique. The structural characterizations of the polyesters have been carried out using infra-red, 1^H - and ¹³C- nuclear magnetic resonance spectroscopic methods. The thermal properties of the polyesters have been studied using thermogravimetric technique. The off-line pyrolysis of these materials was done. The qualitative and semi-quantitative analyses of the volatiles as well as the heavy mass fractions of the degradation products were carried out using a gas chromatograph coupled to a mass selective detector (GC-MSD). Thermogravimetric data indicate that the thermal stability and the char residue of the polyester resins decrease in the order 1,4-butanediol based>cis-2-butene-1,4-diol based>2,3-dichloro-2-butene-1,4-diol based polyesters. The GC-MSD data indicate that the amount of flame cooling agents (hexa-, isomeric penta-, tetra- and isomeric tri-chlorocyclopentadienes) produced during the pyrolysis of the polyesters increases in the order 2,3-dichloro-2-butene-1,4-diol based<cis-2-butene-1,4-diol based<1,4-butanediol based polyesters. The trends observed in these two parameters which are contributing factors to the flame retardancy of the polyester materials were suitably explained on the basis of the effect of the structural changes in the diol part of the polyesters on the primary degradation mechanism, the β-chain scission process.     

Diastereoselective Synthesis of Cyclododeca-1,6-diallenes ( = cyclododeca-l,2,6,7-tetraenes)

The synthesis of substituted cyclododeca-1,6-diallenes.( = cyclododeca-1,2,6,7-tetraenes) from cyclododeca-5,11-diyne-1,4-diols is described (Schemes 1 and 3). The ca. 1:1 mixtures of the stereoisomers of the cyclododeca-1,6-diallenes were formed in high yields from the ca. 1:1 diastereoisomer mixtures of the 1,4-disubstituted cyclododeca-5,11-diynes by reactions with Me₂CuLi or t-BuMgCl/Cu^II. In mechanistically relevant experiments with the pure diastereoisomers of 1,4-dimethylcyclododeca-5,11-diyne-1,4-diol, it is demonstrated that the configuration is conserved in these reactions. The first synthesis of a 1-substituted cyclododeca-2,8-diyne bearing only one propargylic leaving group gives access to a mixed 12-membered allen-yne (Scheme 5).     

Development of new methods for the synthesis of 2,3-bis(nitroxymethyl)-2,3-dinitrobutane-1,4-diol dinitrate and its intermediates

Known methods for the synthesis of 2,3-bis(nitroxymethyl)-2,3-dinitrobutane-1,4-diol dinitrate and its intermediates were investigated. New procedures were developed for the preparation of these compounds. 2,3-Bis(nitroxymethyl)-2,3-dinitrobutane-1,4-diol dinitrate was studied by X-ray diffraction.

     

Procedures for recovery of crystalline 2-butyne-1,4-diol from industrial aqueous solutions and for its purification

Four procedures for recovery of crystalline 2-butyne-1,4-diol from aqueous solutions and for its purification were examined. Samples of crystalline 2-butyne-1,4-diol containing 98.5 to 99.9 wt % target product were obtained.     

De novo synthesis of oligosaccharides using a palladium-catalyzed glycosylation reaction

The natural all d- and/or unnatural all l-1,4- and 1,6-oligosaccharides were synthesized from furan alcohols using a palladium-catalyzed glycosylation reaction. The 1,4- and 1,6-alpha-manno-disaccharides were achieved in seven total steps starting from chiral furan alcohols. Similarly, 1,4- and 1,6-alpha-manno-trisaccharides were also synthesized in nine total steps. Key to the overall efficiency of this process was the use of highly diastereoselective palladium-catalyzed glycosylations, reductions, and dihydroxylations.     

Enantioselective photoconversion of pyridones into β-lactam derivatives in inclusion complexes with optically active host compounds

Irradiation of inclusion complexes of pyridones and optically active host compounds, (R,R)-(-)-1,6-di(o-chlorophenyl)-1,6-diphenylhexa-2,4-diyne-1,6-diol and (R,R)-(-)-trans-4,5-bis(hydroxydiphenylmethyl)-2,2-dimethyl-1,3-dioxacyclopentane, in the solid state gave optically active β-lactam derivatives.     

Synthesis and Herbicidal Activity of Some Substituted 1,3-Dioxacycloalkanes and gem-Dichlorocyclopropanes

Russian Journal of General Chemistry - Starting from ethylene glycol and cis-butene-1,4-diol, 1,3-dioxacycloalkanes derivatives with carbo- and heterocyclic fragments were obtained and...     

Electrolytic reduction of 2-butyne-1,4-diol as a route to trans-2-butene-1,4-diol

The effect of the cathode material on the electrochemical transformations of 2-butyne-1,4-diol at atmospheric pressure was studied by chromatographic analysis. The optimal parameters of the selective synthesis of trans-2-butene-1,4-diol were determined.     

Ab initio conformational studies on diols and binary diol-water systems using DFT methods. Intramolecular hydrogen bonding and 1:1 complex formation with water

Studies on the conformational equilibrium for the following diols, ethane-1,2-diol (12EG, CAS 107-21-1), 2R-D-(-)-propane-1,2-diol (12PG, CAS 4254-14-2), (2S,3S)-L-(+)-butane-2,3-diol (L23BD, CAS 19132-06-0), and (2S,3R)-meso-butane-2,3-diol (m23BD, CAS 5341-95-7), are described using Gaussian ab initio calculations involving density functional theory (DFT) methods. We also report in this article results on the stability and conformation for the 1:1 water-diol complex formed by ethane-1,2-diol, propane-1,2-diol, and L- and meso-butane-2,3-diol. The relative stability of the intramolecular (internal) hydrogen bond in a range of diols (n = 2 to 6), based on ab initio geometry optimization and determination of the -O...H- distance, dOH, and -O-H...O- angle, theta, increases through the sequence 1,2 approximately equals 2,3 < 1,3 < 1,4 approximately equals 1,5 approximately equals 1,6, as judged from the bond linearity and -O...H- separation. Quantum mechanical and topological analysis of possible intramolecular hydrogen bonding in this complete series of diols provides convincing evidence for this in diols in which the hydroxyl groups are separated by three or more carbon atoms, that is, in (n, n+m) diols for m > or = 2, but not for ethane-1,2-diol or other vicinal diols, which do not satisfy Popelier's topological and electron density criteria based on the AIM theory of Bader. Based on these criteria it is unlikely that vicinal diols are in fact capable of forming an intramolecular hydrogen bond, in spite of geometric and spectroscopic data in the literature suggesting otherwise.