A new spectrophotometric method for the determination of dithianon in commercial formulations and its residues in foodstuffs

A new, simple, and rapid spectrophotometric method for the microdetermination of dithianon, on the basis of its reaction with a dithiocarbamate, is described. The red color, which develops instantaneously when mixing the fungicide with the reagent in acetonitrile, is stable for at least 1 h and is measured at 520 nm. Beer's law is applicable up to 12 micrograms/mL dithianon concentration. The method has been successfully adapted to the analysis of the fungicide in commercial formulations and its residues on grains and apple (fruit and leaves). A photometric titration method for formulation analysis of the fungicide has also been developed.     

New,simple and validated kinetics spectrophotometric method for determination of moxifloxacine in its pharmaceutical formulations

The objective of this research was to develop a kinetic spectrophotometric method for determination of moxifloxacine (MOXF) in pure form and pharmaceutical formulations. The method was based on the formation of a colored N-vinyl chlorobenzoquinone derivative of MOXF by its reaction with 2,3,5,6-tetrachloro-1,4-benzoquinone in presence of acetaldehyde.The formation of the colored product was monitored spectrophotometrically by measuring the absorbance at 652 nm. Factors affecting the reaction were studied and optimized. The stoichiometry of the reaction was determined, and the reaction pathway was postulated. The activation energy of the reaction was calculated and found to be 6.65 kJ mol^?1. Under the optimized conditions, the initial rate and fixed time (at 5 min) methods were utilized for constructing the calibration graphs. The graphs were linear in concentration ranges 5–100 and 15–150 μg ml^?1 with limit of detection of 2.0 and 5.0 μg ml^?1 for the initial rate and fixed time methods, respectively. The analytical performance for both methods was fully validated, and the results were satisfactory. No interference was observed from the excipients that are commonly present in the pharmaceutical formulations. The proposed method was successfully applied to the determination of MOXF in its pharmaceutical formulations. The label claim percentages were 101.25 ± 0.73% and 100.92 ± 0.65% for the initial rate and fixed time method, respectively. Statistical comparison of the results with those obtained by a reference spectrophotometric method showed excellent agreement between the accuracy and precision of the two methods. The proposed method has great value in its application to the analysis of MOXF in quality control laboratories.     

A rapid spectrophotometric method for determination of piperazine

A spectrophotometric method has been developed for the determination of piperazine and its salts (citrate, phosphate, and tartrate) without prior separation, based on the interaction of piperazine or any of its salts with phenothiazine and N-bromosuccinimide in aqueous methanol. The products exhibit absorption maxima at 448, 595 and 645 nm. Measurements are made at 595 nm. Beer's law is obeyed in the concentration range 0.5-5 mug/ml for piperazine salts and 0.5-3 mug/ml for piperazine hexahydrate. The method is rapid, simple and successful for analysis of some pharmaceutical preparations.     

A simple and rapid spectrophotometric method for the determination of nitrite by its decolorizing effect on peroxovanadate complex

A rapid, simple, and most economical spectrophotometric method was proposed for the determination of nitrite in various water samples, soil samples, and roots of leguminous plants. The method is based on decolorizing effect of nitrite on complex formed between hydrogen peroxide and vanadate in acidic medium. The decolorization of that complex by nitrite was exploited to monitor the reaction spectrophotometrically at 470 nm.The method was optimized for effect of concentrations of ammonium metavanadate, hydrogen peroxide, various acids, concentrations of sulphuric acid, order of reagents addition and color stability. The color of the complex was found to be stable for about 2 days, and the stability constant of the complex was also calculated by modified Job's method. The linearity range of the calibration graph was over 6.67-66.7 microg ml(-1) of nitrite with molar absorptivity, 0.276 x 10(3) mol(-1) l cm(-1) and Sandell's sensitivity, 0.1667 microg cm(-2). The method was applied successfully for the determination of nitrite in soil samples, various wastewater samples and roots of leguminous plants.     

A simple spectrophotometric method for the determination of minoxidil

A simple and sensitive method for the determination of minoxidil using 3-methyl-2-benzothiazolinone hydrazone (MBTH) and Fe(III) as the coloring agent is described. The method is sensitive to permit the determination of 0.5–4.5 μg ml⁻¹ of minoxidil at 500 nm. The accuracy and precision of the method were checked by high-performance liquid chromatography.     

A rapid spectrophotometric method for determination of zinc in milk

1-(2',3'-Dihydroxypyridyl-4'-azo)benzene-4-sulphonic acid and the corresponding 5'-chloro-substituted acid are proposed as sensitive reagents for zinc. Cyanide masking and selective demasking of zinc can be used to deal with the interference of many metal ions, cadmium can be masked with semithiocarbazide, and thiosulphate can be used for masking Hg(II), Pd(II) and Os(VIII). The molar absorptivities are about 1.3 x 10(5) 1.mole(-1).cm(-1). The method has been used for determinating zinc in milk.     

A simple spectrophotometric method for determination of carbosulfan and propoxur

A new spectrophotometric method for the determination of carbosulfan and propoxur is described, based on coupling their hydrolysis products with diazotized 2-aminobenzophenone to give orange species having an absorption maximum at 465 and 475 nm respectively. Beer's law is obeyed from 0.5 to 10 ppm.     

Amperometric and spectrophotometric determination of carbaryl in natural waters and commercial formulations

The work presented describes the development and evaluation of two flow-injection analysis (FIA) systems for the automated determination of carbaryl in spiked natural waters and commercial formulations. Samples are injected directly into the system where they are subjected to alkaline hydrolysis thus forming 1-naphthol. This product is readily oxidised at a glassy carbon electrode. The electrochemical behaviour of 1-naphthol allows the development of an FIA system with an amperometric detector in which 1-naphthol determination, and thus measurement of carbaryl concentration, can be performed. Linear response over the range 1.0×10^–7 to 1.0×10^–5 mol L^–1, with a sampling rate of 80 samples h^–1, was recorded. The detection limit was 1.0×10^–8 mol L^–1. Another FIA manifold was constructed but this used a colorimetric detector. The methodology was based on the coupling of 1-naphthol with phenylhydrazine hydrochloride to produce a red complex which has maximum absorbance at 495 nm. The response was linear from 1.0×10^–5 to 1.5×10^–3 mol L^–1 with a detection limit of 1.0×10^–6 mol L^–1. Sample-throughput was about 60 samples h^–1. Validation of the results provided by the two FIA methodologies was performed by comparing them with results from a standard HPLC–UV technique. The relative deviation was <5%. Recovery trials were also carried out and the values obtained ranged from 97.0 to 102.0% for both methods. The repeatability (RSD, %) of 12 consecutive injections of one sample was 0.8% and 1.6% for the amperometric and colorimetric systems, respectively.     

A rapid method for spectrophotometric determination of molybdenum in alloy steels

Summary A Rapid Method for Spectrophotometric Determination of Molybdenum in Alloy Steels Molybdenum (VI) forms an orange-red coloured mixed-ligand complex with perazine dimalonate and thiocyanate at room temperature (27°) in hydrochloric acid. The complex is soluble in ethanol. It exhibits absorption maximum at 460 nm. Beer's law is valid over the molybdenum concentration range 0.1–14.0,g/ml. Sandell's sensitivity of the reaction is 0.9·10^–3 g Mo/cm² and the molar extinction coefficient is 1.06·10⁴ 1·mol^–1·cm^–1 at 460 nm. The stoichiometry of the complex is (Perazine·H) [MoO(SCN)₄] as shown by Job's method, equilibrium shift method and elemental analyses of the isolated complex. The proposed method has been used for the determination of molybdenum in ores, alloy steels and in synthetic mixtures containing chromium, tungsten, iron, cobalt, nickel and copper.Presented at the 36th Pittsburgh Conference and Exposition on Analytical Chemistry and Applied Spectroscopy, New Orleans, February 25-March 1, 1985.     

A simple spectrophotometric method for determination of isoxsuprine hydrochloride in pharmaceuticals

A spectrophotometric method has been developed for the determination of isoxsuprine hydrochloride and its dosage forms, based on its coupling reaction with diazotized sulphanilic acid. The yellow chromophore has an absorption maximum at 440 nm. Beer's law holds over the range 0.8-8 mu/ml in the final solution.     

A simple and green analytical method for determination of glyphosate in commercial formulations and water by diffuse reflectance spectroscopy

This article describes a simple, inexpensive, and environmentally friendly method for the monitoring of glyphosate using diffuse reflectance spectroscopy. The proposed method is based on reflectance measurements of the colored compound produced from the spot test reaction between glyphosate and p-dimethylaminocinnamaldehyde (p-DAC) in acid medium, using a filter paper as solid support. Experimental designs were used to optimize the analytical conditions. All reflectance measurements were carried out at 495 nm. Under optimal conditions, the glyphosate calibration graphs obtained by plotting the optical density of the reflectance signal (AR) against the concentration were linear in the range 50-500 μg mL(-1), with a correlation coefficient of 0.9987. The limit of detection (LOD) for glyphosate was 7.28 μg mL(-1). The technique was successfully applied to the direct determination of glyphosate in commercial formulations, as well as in water samples (river water, pure water and mineral drinking water) after a previous clean-up or pre-concentration step. Recoveries were in the ranges 93.2-102.6% and 91.3-102.9% for the commercial formulations and water samples, respectively.     

Spectrophotometric method for determination of atrazine and its application to commercial formulations and real samples

A simple sensitive spectrophotometric method has been developed for the determination of atrazine in herbicide formulations and real samples. The method was based on the reaction of atrazine with pyridine to form a quaternary halide which in the presence of alkali forms a carbinol base. The heterocyclic ring of the carbinol base breaks and forms the glutaconic dialdehyde. The glutaconic dialdehyde group was coupled with sulfanilic acid to form a yellow coloured product having λ _max 450 nm or coupled with aniline to form a orange red coloured product having λ _max 480 nm. The Beer's law was obeyed over the range from 0.1 to 25 µg mL^?1 and molar absorptivity 1.5 × 10⁴ L mol^?1 cm^?1 for sulfanilic acid, and from 0.08 to 12 µg mL^?1 and molar absorptivity 1.3 × 10⁴ L mol^?1 cm^?1 for aniline were observed. The reaction conditions and other analytical parameters were optimised. The proposed method has been successfully applied for the analysis of commercial formulations and real samples.     

A rapid spectrophotometric method for the determination of carbon monoxide in ambient air

A sensitive spectrophotometric method for the determination of carbon monoxide is described, based on the reduction of palladium(II) by carbon monoxide. The resulting elemental palladium is reacted with iodate in acidic medium in the presence of chloride, to produce an ICl(-)(n) species that is readily extracted as an ion-pair with Pyronine-G into benzene. Measurement of the absorbance of the extract at 535 nm permits the determination of carbon monoxide down to 1 mul/l. in air. The effect of interfering gases is discussed. The method is suitable for determination of carbon monoxide in motor vehicle exhaust gases and ambient air.     

A rapid and precise computer-aided method for the spectrophotometric determination of substances in solution

The Newton—Raphson iteration method for the solution of mass-balance equations is used. Given accurate spectrophotometric data (absorbances, absorptivities) and equilibrium constants, this procedure permits rapid determination of substances in solution. The program is convenient to use and gives satisfactory results on a number of systems. The pyridoxal hydrochloride system was selected for evaluation of equilibrium constants and molar absorptivities from spectrophotometric and potentiometric data and was then used as the main test of the SPEDEAD program (SPEctrophotometric DEtermination by Absorbance Data).     

A rapid spectrophotometric method for the simultaneous determination of cumene and benzene in air

Summary The paper deals with recent analytical methods for the determination of cumene and benzene.In the method emphasized here cumene and benzene are determined at 258, 260 and 268 nm in n-heptane solution. The concentration is obtained graphically by means of a calibration diagram.Silica gel is used for the adsorption of benzene and cumene from air samples.

---

Zusammenfassung Die neueren analytischen Methoden zur Bestimmung von Cumol und Benzol werden besprochen.Nach der hier angegebenen Methode erfolgt die Bestimmung von Cumol und Benzol UV-spektrophotometrisch bei 258, 260 und 268 nm in n-Heptan. Die Konzentration wird graphisch mit Hilfe eines Eichdiagramms ermittelt.Für die Adsorption der gesuchten Stoffe aus Luft- und Gasproben wird Silicagel verwendet.

---

---

Technical assistance in this investigation was provided by Mrs. J. Krídlova.     

A simple and rapid chemical method for the determination of cephalosporins

A simple and rapid chemical assay for cephalosporins is described. It is a simple modification of the colorimetric determination of penicillins in which the narrow spectrum beta-lactamase (penicillinase) is replaced by a broad spectrum beta-lactamase (cephalosporinase) produced by Enterobacter cloacae. The method can be used for assay of fermentation broths as well as for pure cephalosporins.     

An oxidimetric method for the determination of thiophanatemethyl in commercial formulations

A simple, accurate and reliable titrimetric method is described for the determination of thiophanate-methyl, an important commercial fungicide. The method is based on its direct titration at room temperature with ammonium hexanitratocerate(IV) in sulphuric acid medium in the presence of potassium iodate as catalyst. The method permits detection of the end-point visually, potentiometrically or spectrophotometrically. The proposed method is recommended for routine determination of the fungicide in its commercial formulations.