富勒烯配合物C60Pd(Ph2PCH2CH2CH2CH2PPh2)的合成和光电性能

本文在惰性气氛中通过取代反应合成出富勒烯金属配合物C₆₀Pd(Ph₂PCH₂CH₂CH₂CH₂PPh₂)，采用元素分析、红外光谱、紫外可见光谱、光电子能谱以及X射线粉末衍射等手段对产物进行表征,同时研究了产物的氧化还原性能及热稳定性能。此外，在光电化学电池中测定了C₆₀Pd(Ph₂PCH₂CH₂CH₂CH₂PPh₂)在GaAs电极上形成n+n型异质结的光伏效应，结果表明：产物具有优良的光电转化性能，尤其是在BQ/H2Q介质电对中，光生电压最大达到212 mV；当C₆₀Pd(Ph₂PCH₂CH₂CH₂CH₂PPh₂)薄膜厚度为1 μm时，光伏效应值最大。     

Phase equilibria and glass formation in the As2S3-TlAs2S2Se2 section of the As2S3-As2Se3-TlS system

Alloys in the As₂S₃-TlAs₂S₂Se₂ section of the As₂S₃-As₂Se₃-TlS ternary system were studied and a phase diagram was constructed using physicochemical methods (differential thermal analysis, microstructural analysis, X-ray powder diffraction, also microhardness and density measurements). The diagram in the As₂S₃-TlAs₂S₂Se₂ section is a non-quasi-binary diagonal section of the As₂S₃-As₂Se₃-TlSe quasi-ternary system. It was found that all the alloys in the section under ordinary conditions are obtained in the vitreous state. At low As₂S₃ concentrations in the section, solid solutions form up to 2.5 mol %, and at low TlAs₂S₂Se₂ concentrations, their extent is 3 mol %.     

Solubility in the Na2Cr2O7-(NH4)2Cr2O7-K2Cr2O7-H2O system

Solubility in the Na₂Cr₂O₇-(NH₄)₂Cr₂O₇-K₂Cr₂O₇-H₂O four-component water-salt system at 25, 50, and 75°C was studied for the first time. Phase field boundaries for individual salts and potassium and ammonium dichromate solid solutions, monovariant lines, and invariant points were determined. Experimental data were used to optimize the looped isohydric process of potassium dichromate preparation involving additional salts.     

Polymorphism in the Sc2Si2O7-Y2Si2O7 system

This paper examines the structural changes with temperature and composition in the Sc₂Si₂O₇-Y₂Si₂O₇ system; members of this system are expected to form in the intergranular region of Si₃N₄ and SiC structural ceramics when sintered with the aid of Y₂O₃ and Sc₂O₃ mixtures. A set of different compositions have been synthesized using the sol-gel method to obtain a xerogel, which has been calcined at temperatures between 1300 and 1750 °C during different times. The temperature-composition diagram of the system, obtained from powder XRD data, is dominated by the β-RE₂Si₂O₇ polymorph, with γ-RE₂Si₂O₇ and δ-RE₂Si₂O₇ showing very reduced stability fields. Isotherms at 1300 and 1600 °C have been analysed in detail to evaluate the solid solubility of the components. Although, the XRD data show a complete solid solubility of β-Sc₂Si₂O₇ in β-Y₂Si₂O₇ at 1300 °C, the ²⁹Si MAS-NMR spectra indicate a local structural change at x ca. 1.15 (Sc_2−xY_xSi₂O₇) related to the configuration of the Si tetrahedron, which does not affect the long-range order of the β-RE₂Si₂O₇ structure. Finally, it is interesting to note that, although Sc₂Si₂O₇ shows a unique stable polymorph (β), Sc³⁺ is able to replace Y³⁺ in γ-Y₂Si₂O₇ in the compositional range 1.86?x?2 (where x is Sc_2−xY_xSi₂O₇) as well as in δ-Y₂Si₂O₇ for compositions much closer to the pure Y₂Si₂O₇.     

Some studies on the solid solutions in the systems Sr2Nb2O7Eu2Nb2O7 and Sr2Ta2O7Eu2Ta2O7

Preparation of new solid solutions containing divalent europium have been tried in the systems Eu₂Nb₂O₇Sr₂Nb₂O₇ and Eu₂Ta₂O₇Sr₂Ta₂O₇. These solid solutions described as Eu_2xSr_2(1?x)M₂O₇ (M = Nb and Ta) exist in a pure orthorhombic phase in a limited region of x from 0 to about 0.5. The compounds with compositions close to Eu₂M₂O₇ exist but techniques have not been found to prepare them in pure form.     

P2O5对Li2O-SiO2-Al2O3-K2O-ZnO体系微晶玻璃析晶性能的影响

采用差热分析、X射线衍射及扫描电镜分析手段研究了P₂O₅对Li₂O-SiO₂-Al₂O₃-K₂O-ZnO体系牙科微晶玻璃析晶性能的影响, 并确定了P₂O₅的最适含量. 结果发现P₂O₅是该玻璃体系的有效成核剂, 未添加P₂O₅的玻璃体系成核密度低, 热处理后不能形成微晶体, 且主晶相为硅酸锂; 添加P₂O₅使玻璃在热处理后形成以二硅酸锂为主晶相的微晶玻璃. 该玻璃体系中添加4.5 wt%的P₂O₅可以得到较高体积含量和理想显微结构的牙科二硅酸锂微晶玻璃. P₂O₅含量为6 wt%的基质玻璃发生乳浊, 呈不透明的乳白色.     

Li2O-TiO2-SiO2-P2O5和Li2O-TiO2-Al2O3-P2O5体系锂离子固体电解质的制备及性能研究

一些具有NASICON型网格结构的固体电解质具有高的电导率和好的稳定性,NASICON的意思是Na Super Ionic Conductor[1]。当NaZr2(PO4)3中P5 被Si4 部分取代时便可以得到具有NASICON结构的Na1 xZr2SixP3-xO12体系,其具有高的钠离子电导率。然而有相同结构的Li1 xZr2SixP3-xO12体系的离子电导率却很低,这是因为Li 半径太小,而NASICON三维网格结构的离子通道太大,两者不匹配而使电导率下降[2]。但当LiZr2(PO4)3中Zr4 被离子半径小些的Ti4 取代,所得LiTi2(PO4)3的通道就与Li 半径相匹配,适合于锂离子的迁移,从而使其电导率…     

KCl-KBO2-K2CO3, K2MoO4-KBO2-K2CO3, and K2WO4-KBO2-K2CO3 ternary systems

phase diagrams of KCl-KBO₂-K₂CO₃, K₂MoO₄-KBO₂-K₂CO₃, and K₂WO₄-KBO₂-K₂CO₃ ternary systems were studied by a calculation-experimental method and differential thermal analysis (DTA). The coordinates of ternary eutectics were determined to be E ₁: 622°C, 8.5 mol % KBO₂, 56.5 mol % KCl, and 35 mol % K₂CO₃; E ₂: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂MoO₄; E ₃: 710°C, 23 mol % KBO₂, 43 mol % K₂CO₃, and 34 mol % K₂WO₄. The specific heats of melting of the eutectics were determined.     

Interaction in the Ga2S3-Y2O2S system

The phase diagram of the Ga₂S₃-Y₂O₂S system has been investigated by differential thermal, X-ray powder diffraction, microstructural, and thermodynamic analyses. It has been established that the system is eutectic, and solubility at 295 K from the Ga₂S₃ side reaches 3 mol % Y₂O₂S. The coordinates of the eutectic point are 14 mol % Y₂O₂S and 1320 K.     

The rate coefficients for the thermal decomposition of CCl3O2NO2

The thermal decomposition of CCl₃O₂NO₂ has been reevaluated based on new rate data for the reaction of Cl + NO₂. The revised rate coefficient for CCl₃O₂NO₂ thermal decay at about 1 atm total pressure (mainly N₂) is 1.42 × 10¹⁶ × exp(?11500/T) s^?1 from 268–298 K.     

制备方法对Fe2O3/Al2O3-ZrO2在乙苯脱氢反应中催化性能的影响

为提高含铁催化剂的脱氢活性,采用浸渍法和一步沉淀法制备了Fe、Al和Zr含量相同的F4AZ10-imp和F4AZ10-pre催化剂,在550 ℃考察了其在乙苯CO₂氧化脱氢制苯乙烯反应过程中的催化性能,并结合XRD、N₂-吸附、NH₃-TPD、CO₂-TPD和H₂-TPR等表征手段对催化剂进行了分析。结果表明,与浸渍法相比,一步沉淀法制备的催化剂更有利于活性组分Fe₂O₃在催化剂表面的分散及反应物CO₂的转化。     

Intermolecular forces for D2, N2, O2, F2 and CO2

The intermolecular potentials for D₂, N₂, O₂, F₂ and CO₂ are determined on the basis of the second virial coeffincients, the polarizabilities parallel and perpendicular to the molecular axes, and the electric quadrupole moment. The repulsive parts of the potentials are taken from the corresponding Kihara core-potentials. Effects of the octopolar induction are taken into consideration in a unique way. The potential depends on relative orientations of the two molecules as well as the distance r between the molecular centers. This dependence is shown in graphs. A measure of the anisotropy of the potential depth is 0.72 for CO₂ 0.36 for D₂, and smaller than 0.27 for N₂ O₂ and F₂. The remarkable anisotropy for CO₂ and D₂ is due to strong electrostatic quadrupole interactions.     

A theoretical study of the reaction of SiH2 with C2H2 and C2D2

Potential energy surfaces of the reaction of SiH₂ and C₂H₂ (and C₂D₂) have been calculated by means of ab initio molecular orbital theory at the QCISD/6-311G++(2df, 2p)//MP2/6-31G(d, p) level with corrections for the triple excitations to the QCISD energies. The barrier heights for the two reaction channels of the adduct, thus calculated, were further utilized for the dynamical calculation of the rate constants in the framework of quantum statistical Rice-Ramsperger-Kassel theory. Contributions of the rate constants of the various pathways to the total rate constant (K_T) for the disappearance of the reactants are critically examined and compared with experiment. The pressure dependence of K_T(C₂H₂) is primarily due to the formation of silirene. K_T(C₂D₂) is consistently higher than K_T(C₂H₂). The standard heat of formation of silirene is predicted to be 72.1 ± 3 kcal/mol. Rearrangement of silirene to vinylsilylene requires an activation energy smaller than that to silylacetylene.     

The preparation of NbH5(Me2PCH2CH2Me2)2 and NbHL2(Me2PCH2CH2PMe2)2 (L = CO or C2H4)

MMe₅(dmpe) (M = Nb or Ta, dmpe = Me₂PCH₂CH₂PMe₂) reacts with H₂ (500 atm) and dmpe in THF at 60°C to give MH₅(dmpe)_2? NbH₅(dmpe)₂ readily reacts with two mol of CO or ethylene (L) to give NbHL₂(dmpe)₂. The exchange of the hydride ligand with the ethylene protons in NbH(C₂H₄)₂(dmpe)₂ is not rapid on the ¹H NMR time scale (60 MHz) at 95°C.     

SnSbBiTe4-2Bi2Te3 join of the SnTe-Bi2Te3-Sb2Te3 quasi-ternary system

This is the first study of the SnSbBiTe₄-2Bi₂Te₃ join of the SnTe-Bi₂Te₃-Sb₂Te₃ quasi-ternary system by the methods of complex physicochemical analysis over a wide range of concentrations. A phase diagram was constructed for the title quasi-binary join. The system was found to be of the eutectic type; the eutectic coordinates are 65 mol % Bi₂Te₃ and 675 K. The starting components were shown to form solid solutions with extents of 20 mol %. Alloys with compositions lying within the Bi₂Te₃-based solid solution region were found to be n-type semiconductors.     

Structural study of the NaCdVO4-Cd3V2O8 and CdO-V2O5 sections of the ternary system Na2O-CdO-V2O5

The NaCdVO₄-Cd₃V₂O₈ and CdO-V₂O₅ sections of the ternary system Na₂O-CdO-V₂O₅ have been studied and the crystal structures of Cd₃V₂O₈ and Cd₁₈V₈O₃₈ compounds were determined from single-crystal X-ray diffraction data. Cd₃V₂O₈ crystallizes with the maricite-type structure in space group Pnma, a=9.8133(10) Å, b=6.9882(10) Å, c=5.3251(10) Å and Z=4, whereas Cd₁₈V₈O₃₈ crystallizes in space group P1 with a new-type structure, a=8.5761(14), b=8.607(3), c=12.896(2) Å, α=95.64(1), β=102.45(1), γ=108.42(1)° and Z=1. The Cd₃V₂O₈ structure is made up of Cd1O₄ infinite chains of edge-sharing Cd1O₆ octahedra which are parallel to the b direction. The Cd1O₄ chains are linked together by VO₄ tetrahedra and strongly distorted Cd2O₄ tetrahedra. The structure of Cd₁₈V₈O₃₈ is based on an ordered three-dimensional framework of cadmium and vanadium polyhedra that share corners. The distorted CdO₆ octahedra, CdO₅ trigonal bipyramids and CdO₅ square pyramids share corners, edges or faces.     

Synthesis and characterization of inorganic solid electrolytes of Li2O-SiO2-P2O5 and Li2O-TiO2-SiO2-P2O5 systems

The lithium-ion-conducting inorganic solid electrolytes in the oxide systems Li₂O-SiO₂-P₂O₅ and Li₂O-TiO₂-SiO₂-P₂O₅ were prepared by the solid-state reaction, and the electrolyte pellet made by cold-pressing method had diameter of 13 mm and was about 1 mm thick. Phase identification and surface morphology of the products were carried out by X-ray diffraction and scanning electron microscopy. Ionic conductivity of the pellets was investigated through ac impedance. The results show that the adding of other cations can improve the ionic conductivity of the solid electrolyte, and the sintering temperature and duration can influence the ionic conductivity. The maximum ionic conductivity in the samples is 9.9 × 10⁻⁴ S/cm in the Li₂O-TiO₂-SiO₂-P₂O₅ system. Original Russian Text ? W. Li, M. Wang, Z.H. Li, X.F. Shang, H. Wang, Y.W. Wang, Y.B. Xu, 2007, published in Elektrokhimiya, 2007, Vol. 43, No. 11, pp. 1341–1345.     

Li2SO4-Na2SO4-H2O和Li2SO4- K2SO4-H2O溶液的体积性质

本文用高精度数字式振荡管密度计测定了288K至318K温度范围内Li₂SO₄ + Na₂SO₄ + H₂O和 Li₂SO₄ + K₂SO₄ + H₂O三元体系的密度。混合溶液的离子强度范围从0.1到4.5 mol.kg_–1,混合溶液中Na₂SO₄和K₂SO₄的离子强度分数为0.2,0.4,0.6和0.8。用密度实验值拟合得到了不同温度下Pitzer离子相互作用模型混合参数θ_V和 ψ_V,模型的计算值与实验值的偏差在±0.002 g.cm_–3以内。用Pitzer模型计算了不同离子强度下三元体系的混合体积。     

High-temperature equilibria and critical phenomena in the Na2CO3-NaCl-H2O and Na2CO3-Na2WO4-H2O systems

Phase equilibria in the Na₂CO₃-NaCl-H₂O and Na₂CO₃-Na₂WO₄-H₂O ternary systems formed by type 1 salts (NaCl, Na₂WO₄) and a type 2 salt (Na₂CO₃) were experimentally studied at temperatures from 425 to 500°C and pressures from 30 to 160 MPa with the contents of type 1 salts from 10 to 30 wt %. Transition from supercritical homogeneous fluid equilibria of the Na₂CO₃-H₂O system to heterogeneous equilibria of the title ternary systems was studied in the presence or absence of liquid phase immiscibility in the type 1 subsystems.