Rovibrational spectroscopy of the Fermi-interacting ν4 = 1 and ν3 = ν6 = 1 levels of DCF3

The high-resolution infrared spectrum of deuterated fluoroform (DCF₃) was studied in the 700 and 1200 cm⁻¹ regions, with the aim of assigning and analyzing the ν₄ CF₃ asymmetric stretching vibration. The Fermi-type anharmonic coupling between the ν₄ = 1 and ν₃ = ν₆ = 1 rovibrational levels, already mentioned in an early work of Ruoff et al. [Spectrochimica Acta Part A 31A (1975) 1099-1100], was studied here for the first time under high resolution. Assignments in the ν₃ + ν₆/ν₄ band system were confirmed and extended by the identification of the ν₃ + ν₆ − ν₆ and ν₄-ν₆ bands in the 700 cm⁻¹ region, the latter being enhanced near the Fermi crossings of the studied levels. Data from both the hot and difference bands were included in the analysis. The close separation of the studied vibrational levels of about 14.8 cm⁻¹ produces a large variety of resonance crossings which involve levels with . Besides the Fermi () and Coriolis () resonances, they were accounted for by inclusion of additional higher-order ( and ) interaction terms between the vibrational states. The least-squares fit of more that 16,000 vibration-rotation transitions provides a quantitative reproduction of data in all bands.     

The rotational spectra of the υ8 = υ9 = 1 and υ6 = υ7 = 1 interacting vibrational states of nitric acid (HNO3)

The analysis of the rotational spectrum of HNO₃ has been extended to include the υ₈ = υ₉ = 1 state at 1205.7 cm⁻¹ and the υ₆ = υ₇ = 1 state at 1223.4 cm⁻¹. Based on 78-519 GHz data, the assignments in the 8¹9¹ vibrational state have been significantly expanded from the previously reported microwave measurements [T.M. Goyette, F.C. De Lucia, J. Mol. Spectrosc. 139 (1990) 241-243]. A new microwave analysis is also reported for the 6¹7¹ vibrational state. A simultaneous analysis takes into account the localized ΔK_a = ±2 Fermi resonances between the vibrational states, describes the torsional splitting of 3.3 and 1.4 MHz for the 8¹9¹ and 6¹7¹ states respectively, and fits to experimental accuracy over 1500 rotational transition frequencies that extend up to J = 59. Infrared energy levels [A. Perrin, J.-M. Flaud, F. Keller, A. Goldman, R. D. Blatherwick, F. J. Murcray, C. P. Rinsland, J. Mol. Spectrosc. 194 (1999) 113-123] were also included in the analysis and fit to experimental accuracy. Measurement of strongly perturbed transitions in each vibrational state provide a determination of the band origin difference of 17.733184(17) cm⁻¹. The rotational constants agree well with those predicted by vibrational-rotational constants of the fundamental modes. Furthermore, the analysis will provide a very accurate simulation of the infrared spectrum of HNO₃ in the 8.3 μm region.     

Flexible broadcasting and multicasting in 4λ × 10 Gb/s AOPR TWDM PON system

In this letter, we propose a new architecture of Time Wavelength Division Multiplexing Passive Optical Network (TWDM PON) system to support dynamic multi wavelength allocation (DMWA) in both upstream and downstream directions using an integrated semiconductor optical amplifier (SOA) and arrayed waveguide grating (AWG) with multi wavelength select continuous wave (CW) pump probe signal module. The significance of this architecture is the flexible routing function with the capability of multicasting and broadcasting between multiple optical line terminal (OLT) PON port with multiple optical distribution network (ODN) link using a new wavelength tuning free (WTF) OLT transmitter module to eliminate wavelength tuning delay in downstream signal utilizing multicasting Cross Gain Modulation (XGM) wavelength conversion. The experimental results show that 4λ × 10-Gb/s TWDM PON system can be used to connect 4096 users with the conventional fixed wavelength OLT transceivers with 36 dB link loss.     

Interaction of H2S with α-Fe2O3(0 0 0 1) surface

The atomic-scale structural changes in an α-Fe₂O₃ (hematite) (0 0 0 1) surface induced by sulfidation and subsequent oxidation processes were studied by X-ray photoemission spectroscopy, LEED, and X-ray standing wave (XSW) measurements. Annealing the α-Fe₂O₃(0 0 0 1) with a H₂S partial pressure of 1 × 10⁻⁷ Torr produced iron sulfides on the surface as the sulfur atoms reacted with the substrate Fe ions. The oxidation state of the substrate Fe changed from 3+ to 2+ as a result of the sulfidation. The XSW measured distance of the sulfur atomic-layer from the unrelaxed substrate oxygen layer was 3.16 Å. The sulfide phase consisted of three surface domains identified by LEED. Formation of the two-dimensional FeS₂ phase with structural parameters consistent with an outermost layer of (1 1 1) pyrite has been proposed. Atomic oxygen exposure oxidized the surface sulfide to a sulfate () and regenerated the α-Fe₂O₃(0 0 0 1) substrate, which was indicated by a (1 × 1) LEED pattern and the re-oxidization of Fe to 3+.     

Elastic properties of mono- and poly-crystalline PbO-type FeSe1−xTex (x = 0–1.0): A first-principles study

The structural parameters of the alloys are obtained as non-magnetic cases for which justification is provided. The elastic coefficients and various moduli of the monocrystalline FeSe_1−xTe_x system as a function of doping are predicted for the first time using density functional method. The bulk moduli, shear moduli, Young’s moduli, Poisson’s ratios, velocities of sound and Debye temperature of the corresponding poly-crystalline aggregates have been calculated and the results discussed.     

High resolution infrared spectrum and global analysis of ν5, ν12, and ν12 + ν6 − ν6 in CH3SiH3

The vibration-torsion-rotation spectrum of CH₃SiH₃ has been measured from 470 to 725 cm⁻¹ at near-Doppler resolution. The full-width at half - maximum of the lines observed near 600 cm⁻¹ was 0.0011 cm⁻¹. The spectra were obtained using a Bruker IFS 125 HR Fourier transform spectrometer with the broadband source radiation being supplied from the synchrotron emission of the storage ring at the Canadian Light Source. Three vibrational bands were investigated: the lowest lying perpendicular fundamental ν₁₂ centred near 524 cm⁻¹, the lowest lying parallel fundamental ν₅ near 703 cm⁻¹, and the torsional hot band ν₁₂ + ν₆ − ν₆ near 534 cm⁻¹. For ν₁₂ and ν₅, the resolution and sensitivity are much improved over those in earlier studies, with many of the torsional multiplets now being resolved even in the cases where the upper levels are unperturbed. The primary motivation for the present work was the hot band, here reported for the first time, where the dependence of the silyl rock in ν₁₂ on the torsional motion is much more pronounced. In addition, for the vibrational ground state (gs), two “forbidden” high torsional overtones v₆ = 3 ← 0 and 5 ← 0 have been observed that become allowed through resonant mixing of the upper states with ν₁₂ and ν₅, respectively. In each case, two (K, σ) series have been measured where the mixing is largest. Here σ = 0, 1, −1 labels the torsional sub-levels. Using the Fourier transform waveguide spectrometer at E. T. H., the three σ-components of the (J = 1 ← 0) transition in ν₁₂ + ν₆ were observed, and a series of direct l-doubling transitions in ν₁₂ + ν₆ were measured for σ = 0. In a global fit, all the new data have been analysed along with the frequencies for other transitions obtained in earlier investigations. The analysis takes into account the relevant interactions among the torsional stacks of levels in the gs, ν₁₂, and ν₅. These include the previously known (gs, ν₁₂) Coriolis-like and (gs, ν₅) Fermi-like interactions along with a higher order (ν₁₂, ν₅) Coriolis-like coupling introduced here. This last is responsible for the strong perturbation of the ν₅ series with K = 10, 11, and 12, and of the corresponding hot band series. A good fit to 9282 frequencies including 7942 new measurements was obtained both with the Free Rotor model in which the torsion is classified as a rotation, and with the High Barrier model in which the torsion is classified as a vibration. The Hamiltonian is discussed with emphasis on the new terms required for treating ν₁₂ + ν₆ − ν₆.     

Non-universal dielectric relaxation in SrFeO3 − δ

SrFeO_3 − δ compound is prepared by the thermal decomposition method followed by ball milling. Analysis of Mössbauer spectrum and X-ray diffraction study proves the presence of multi-phase nature, i.e., Sr₈Fe₈O₂₃ and Sr₄Fe₄O₁₁ phases at room temperature. Furthermore, the Mössbauer spectrum at room temperature evidenced the presence of major Fe^3.5+ which is the resultant of equal contributions of Fe⁴⁺ and Fe³⁺. The Nyquist plot at all measured temperatures (80–230 K) suggests that the dielectric response is well associated with single relaxation time (exponential parameter, n∼1$n\sim 1$) i.e., the Debye-type. Modulus analysis exhibits the non-universal dielectric behaviour (stretched exponential parameter, β>1$\beta >1$) below 230 K and the Debye-type responds (β∼1$\beta \sim 1$) at and above 230 K. The Debye-type behaviour exhibited by SrFeO_2.81 at around room temperature in its defect state offers a new opening for this material for multifunctional applications.     

A theoretical analysis on coherent double resonant absorptive lineshape in closely spaced transitions for λ − type five level system

Under Doppler free double resonant condition, an open five level system with three closely spaced upper levels and a pair of closely spaced lower levels, is allowed to interact with two electromagnetic fields. In the domain of semiclassical formulation of atom-field interaction, the optical Bloch equations involving the density matrix elements are constructed. These coupled optical Bloch equations are unsolvable in closed analytical form. We use the perturbation method for getting the approximate analytical solutions to the coupled optical Bloch equations. The absorptive signal lineshape corresponding to pump frequency Ω₁ and signal frequency Ω₂ is obtained. We also obtain the absorptive signal line shape by interchanging the pump and signal (i.e., the pump frequency is Ω₂ and the signal frequency is Ω₁) mutually. The interferences between the probability amplitudes for different energy levels involving the dipole allowed and the dipole forbidden transitions give rise to the field dependent and field independent quantum coherence respectively. With the suitable manipulation of the coherence between the two lower levels, the signal lineshapes for on-resonance and off-resonance pump positions are explored in a great detail. The off-resonance pump leads to the two-photon absorption and hence the signature of the nonlinear resonances. On the other hand, the on-resonance pump positions lead to the Rabi splitting. The shifts of the resonance peak positions are explored as a function of pump intensity and the level spacings of the closely spaced levels.     

Synthesis and characterization of (h 0 h)-oriented silicalite-1 films on α-Al2O3 substrates

A simple and well-designed synthesis procedure is proposed to fabricate silicalite-1 films on porous α-Al₂O₃ substrates on purpose of preventing the aluminum leaching. The continuous and 2 μm thick seed layer of silicalite-1 crystals is fabricated by using a spin coater. The first-time seeded growth is performed to synthesize a thin layer of intergrown ZSM-5 crystals on the silicalite-1 seed layer, where the use of low alkalinity and short synthesis time is to reduce the aluminum leaching. The intergrown layer of ZSM-5 crystals serves as a barrier to block the aluminum leaching from porous α-Al₂O₃ substrates in the second-time seeded growth, leading to the formation of ca. 11 μm thick intergrown and oriented silicalite-1 films with an extremely high Si/Al ratio. According to SEM images and XRD measurements, the as-synthesized silicalite-1 film is dense, continuous, and (1 0 1)-oriented. The electron probe microanalysis (EPMA) of the resulting film demonstrates that there is no aluminum leaching in the second-time seeded growth. The leaking tests confirm that non-zeolitic pores in the silicalite-1 film are negligible.     

Oxidation mechanism and ferryl domain formation on the α-Fe2O3 (0 0 0 1) surface

Recent experimental evidence calls for a reinterpretation of the oxidized structure in chemically distinct domains of the hematite (0 0 0 1) surface as the ferryl (FeO) termination rather than the bulk terminated O₃-Fe-Fe-R structure. Although this interpretation is consistent with experimental data and ab initio thermodynamics calculations, it raises serious questions about how molecular oxygen can be dissociated on a surface where reactive iron centers are slightly more than 5 Å apart. Here, we propose a novel cooperative bimolecular mechanism that provides a reasonable pathway for the formation of the unusual ferryl surface termination and should be readily reversible, which is important for understanding the function of hematite surfaces as an oxidation catalyst.     

Stability, oxygen permeability and chemical expansion of Sr(Fe,Al)O3 − δ- and Sr(Co,Fe)O3 − δ-based membranes

Perovskite-type SrFe_0.7Al_0.3O_3 − δ and SrCo_0.8Fe_0.2O_3 − δ, and two related dual-phase composites with nominal compositions (SrFeO_3 − δ)_0.7(SrAl₂O₄)_0.3 and (SrCo_0.8Fe_0.2O_3 − δ)_0.7(SrAl₂O₄)_0.3, were comparatively studied employing controlled-atmosphere dilatometry, thermogravimetry, Mössbauer spectroscopy, and measurements of steady-state oxygen permeation fluxes through dense ceramic membranes. The composite materials display lower thermal and chemical expansion compared to the parent single-phase perovskites. The thermal expansion coefficients at 1023-1223 K are however still high, (20-23) × 10^− 6 K^− 1 at atmospheric oxygen pressure and (17-18) × 10^− 6 K^− 1 at p(O₂) = 10 Pa, thus limiting the range of possible membrane reactor configurations. Sr(Co,Fe)O_3 − δ-based materials exhibit extensive vacancy-ordering processes in inert atmospheres, resulting in a slow relaxation of the oxygen nonstoichiometry, chemical expansion and oxygen permeation fluxes. In comparison to Sr(Fe,Al)O_3 − δ, the stability of cobalt-containing ceramics in CO₂ is also poor, which leads to a partial blocking of the membrane surface by decomposition products and degradation of the oxygen transport. Thermogravimetric analysis showed that the interaction with carbon dioxide occurs even at elevated temperatures, up to 1223 K. Under high oxygen chemical potential gradients such as air/(H₂-H₂O), the composite membranes showed kinetically stable operation without bulk decomposition at 1073 K. The kinetic stabilization associated with surface-limited oxygen permeation was confirmed by the conversion-electron Mössbauer spectroscopy analysis of one (SrFeO_3 − δ)_0.7(SrAl₂O₄)_0.3 membrane exposed to dry CH₄ at 1173 K, where no traces of Fe²⁺ and metallic iron were detected in the reduced surface layer.     

Adsorption and decomposition of γ-butyrolactone on Pd(1 1 1) and Pt(1 1 1)

The adsorption and thermal chemistry of γ-butyrolactone (GBL) on the (1 1 1) surface of Pd and Pt has been investigated using a combination of high resolution electron energy loss spectroscopy (HREELS) and temperature programmed desorption (TPD). HREELS results indicate that GBL adsorbs at 160 K on both surfaces through its oxygenate functionality. On Pd(1 1 1), adsorbed GBL undergoes ring-opening and decarbonylation by 273 K to produce adsorbed CO and surface hydrocarbon species. On Pt(1 1 1), very little dissociation is observed using HREELS, with almost all of the GBL simply desorbing. TPD results are consistent with decarbonylation and subsequent dehydrogenation reactions on Pd(1 1 1), although small amounts of CO₂ are also detected. TPD results from Pt(1 1 1) indicate that a small proportion of adsorbed GBL (perhaps on defect sites) does undergo ring-opening to produce CO, CO₂, and H₂. These results suggest that the primary dissociation pathway for GBL on Pd(1 1 1) is through O-C scission at the carbonyl position. Through comparisons with previously published studies of cyclic oxygenates, these results also demonstrate how ring strain and functionality affect the ring-opening rate and mechanism.     

Defect structure and oxide ion transport in Sr- and Cr-doped LaCoO3 − δ

The results of oxygen nonstoichiometry, δ, measured by means of coulometric technique as a function of oxygen partial pressure, p_o2, in temperature range 1223 ≤ T, K ≤ 1323 are presented for the perovskite-type doped with chromium solely LaCo_0.7Cr_0.3O_3 − δ and simultaneously doped both with strontium and chromium La_0.7Sr_0.3Co_0.7Cr_0.3O_3 − δ cobaltites. The limit stability of the latter was found to exceed that of undoped cobaltite LaCoO_3 − δ on six orders of magnitude of p_o2 at a given temperature. The modeling of the defect structure of these perovskites was carried out and its adequate model was found. Chemical and self-diffusion coefficients of oxygen vacancies and oxygen ionic conductivity and ionic transport numbers were measured for the first time for La_0.7Sr_0.3Co_0.7Cr_0.3O_3 − δ as a function of oxygen partial pressure p_o2and temperature in the ranges − 4 ≤ log(p_o2, atm) ≤ 0 and 1223 ≤ T, K ≤ 1323, respectively. The additional substitution of Sr for La in LaCo_0.7Cr_0.3O_3 − δ was shown to lead to noticeable increase of ionic conductivity and oxygen chemical diffusion coefficient at given values of oxygen partial pressure and temperature as compared to lanthanum cobaltite doped with chromium solely. Self-diffusion coefficient of oxygen vacancies and their mobility in La_0.7Sr_0.3Co_0.7Cr_0.3O_3 − δ were found to be dependent on oxygen partial pressure and nonstoichiometry unlike undoped and doped with chromium lanthanum cobaltites.     

Oxygen nonstoichiometry, thermo-chemical stability and lattice expansion of La0.6Sr0.4FeO3 − δ

The oxygen nonstoichiometry of La_0.6Sr_0.4FeO_3 − δ was measured at intermediate temperatures (773 to 1173 K) between 1 bar and the decomposition oxygen partial pressure by thermogravimetry and coulometric titration. The decomposition of the ABO₃ perovskite phase was found to occur at low oxygen partial pressures (below 10^− 20 bar). Using an atmosphere-controlled high-temperature XRD setup, the rhombohedral lattice parameters were obtained between 10^− 4 and 1 bar at 773 to 1173 K. A phase transition from rhombohedral to cubic might be expected to occur at high temperatures and for δ near the plateau at δ = [Sr] / 2. The lattice expansion was separated into “pure” thermal and chemically induced expansion by combining the lattice parameters with the oxygen nonstoichiometry data. The linear thermal expansion was formulated with a “pure” thermal expansion coefficient of α_th = 11.052 · 10^− 6 K^− 1 and a chemical expansion coefficient of α_chem = 1.994 · 10^− 2.The results were compared with previous data obtained for La_0.6Sr_0.4Co_1 − yFe_yO_3 − δ with y = 0.2-0.8. La_0.6Sr_0.4FeO_3 − δ was confirmed to show the highest thermo-chemical stability. While the chemical expansion of La_0.6Sr_0.4Co_1 − yFe_yO_3 − δ seems little affected by the iron content, the thermal expansion coefficient was the lowest for La_0.6Sr_0.4FeO_3 − δ.     

Distribution of doped Mn at the Σ3 (1 1 2) grain boundary in Ge

Using first-principles density functional theory method, we have investigated the distribution and magnetism of doped Mn atoms in the vicinity of the Σ3 (1 1 2) grain boundary in Ge. We find that at low concentration, the substitutional sites are energetically favorable over the interstitial ones for Mn. The binding energy of Mn varies with lattice sites in the boundary region, and hence a non-uniform distribution of Mn nears the boundary. However, the average of their segregation energy is quite small, thus no remarkable grain boundary segregation of Mn is predicted. Due to volume expansion at the grain boundary, the spin polarization of Mn is slightly enhanced. Overall, we find that the magnetism of Mn-doped Ge is not sensitively dependent on the grain structure.     

The changes of capacitance-loss and current-voltage characteristics of LaMnO3 + δ/SrTiO3:Nb heterojunctions exposed to ambient air

Effects of moisture absorption on capacitance-loss and current-voltage characteristics of LaMnO_3 + δ/SrTiO₃:Nb heterojunction had been investigated after the heterojunctions were exposed to ambient air. The moisture-absorption-induced increases in loss tangent and breakdown voltage were observed, whereas no changes were found on capacitance and diffusion voltage. These results were discussed by the decrease of oxygen ions in LaMnO_3 + δ and the generation of hydroxide ions at grain boundaries. This work will favor both electronic transport analysis and future device applications.     

Surface and redox chemistry of Sm0.95Ce0.05Fe1 − xNixO3 − δ perovskites

A new series of perovskite materials with formula Sm_0.95Ce_0.05Fe_1 − xNi_xO_3 − δ (0 ≤ x ≤ 0.10) has been prepared by sol-gel combustion via a citrate precursor route. X-ray diffraction data showed that materials prepared by this method had a single orthorhombic phase belonging to the Pnma (62) space group. The study of powders sintered in air and in reducing atmospheres reveals that these materials do not show phase separation in air (up to 1350 °C) nor under 5% v/v H₂/N₂ (up to 700 °C), but a phase separation of Sm₂O₃ does occur at and above 800 °C under 5% v/v H₂/N₂ without deterioration of the perovskite phase. The surfaces of all the powders (fresh, in-situ reduced and ex-situ reduced) were Sm rich, and multiple oxidation states for Fe were observed. XP analysis of in-situ reduced samples (800 °C and above) shows that metallic Fe forms in all nickel doped materials except x = 0.07. The surface oxygen vacancies and percentages of lattice and adsorbed oxygen for this series of Ni doped materials were determined and the oxygen recapturing ability is explained in terms of the multiple oxidation states of Fe.     

Oxygen nonstoichiometry, defect structure and electrical properties of LaFe0.7Ni0.3O3 − δ

Oxygen nonstoichiometry (δ), total conductivity (σ) and thermoelectric power (S) of the LaFe_0.7Ni_0.3O_3 − δ sample have been studied as functions of temperature and oxygen partial pressure. Based on the results of the direct reduction of the sample in hydrogen flow at 1100 °C the absolute oxygen content (3 − δ) has been found to vary from 2.999 to 2.974 in the range of 1273-1373 K and 10^− 3-0.21 atm. The point defect equilibrium models have been proposed and fitted to the set of experimental data in the form of log p(O₂) = f(δ)_T dependences. The values of standard thermodynamic quantities of defect formation reactions have been assessed. The joint analysis of oxygen nonstoichiometry, total conductivity and thermoelectric power has been performed using a small-polaron approach. The values of partial conductivity, partial thermopower and mobilities of electronic charge carriers have been calculated. The p-type semiconducting behavior of LaFe_0.7Ni_0.3O_3 − δ has been explained by the higher mobility values of electron holes than those of electrons in the whole range of thermodynamic parameters studied.