High work function of Al-doped zinc-oxide thin films as transparent conductive anodes in organic light-emitting devices

Deposition of Al-doped ZnO (AZO) films with various film thicknesses on glass substrates was performed to investigate the feasibility of using AZO films as anode electrodes in organic light-emitting devices (OLEDs). The electrical resistivity of the AZO films with a 180-nm thickness was 4.085 × 10⁻² Ω cm, and the average optical transmittance in the visible range was 80.2%. The surface work function for the AZO films, determined from the secondary electron emission coefficients obtained with a focused ion beam, was as high as 4.62 eV. These results indicate that AZO films grown on glass substrates hold promise for potential applications as anode electrodes in high-efficiency OLEDs.     

Effect of annealing on optical and structural properties of ZnS/MnS and MnS/ZnS superlattices thin films for solar energy application

ZnS/MnS super lattice thin films were grown on glass substrates by Chemical Bath Deposition technique. Equimolar aqueous solutions of ZnCl₂:thiourea and MnCl₂·2H₂O:thiourea were taken separately. The substrates were placed vertically in the beakers containing the precursor described above, and the films are deposited at 85 °C for an hour. The as deposited films are annealed at 200 °C for about two hours. X-ray diffractometry method was used to obtain structural characterization. The UV–vis absorption spectrometry was employed to find the optical properties. The refractive-index, dielectric constant, optical conductivity, electrical conductivity and extinction coefficient were determined by various equations based on the data. The valence band and conduction band offset voltages for ZnS/MnS were determined as 0.7 eV and 0.1 eV respectively and for MnS/ZnS were 0.4 eV and 0.3 eV respectively. The band alignment of both superlattice was found to be as Type I.     

Highly conducting and transparent Ti-doped CdO films by pulsed laser deposition

Titanium-doped cadmium oxide thin films were deposited on quartz substrate by pulsed laser deposition technique. The effect of substrate temperature on structural, optical and electrical properties was studied. The films grown at high temperature show (2 0 0) preferred orientation, while films grown at low temperature have both (1 1 1) and (2 0 0) orientation. These films are highly transparent (63-79%) in visible region, and transmittance of the films depends on growth temperature. The band gap of the films varies from 2.70 eV to 2.84 eV for various temperatures. It is observed that resistivity increases with growth temperature after attaining minimum at 150 °C, while carrier concentration continuously decreases with temperature. The low resistivity, high transmittance and wide band gap titanium-doped CdO films could be an excellent candidate for future optoelectronic and photovoltaic applications.     

Pulsed laser deposition and characterization of nitrogen-substituted SrTiO3 thin films

Nitrogen-substituted cubic perovskite-type SrTiO₃ thin films were deposited in a one-step process using pulsed reactive crossed beam laser ablation (PRCLA) and RF-plasma assisted pulsed laser deposition (RF-PLD). Both techniques yield preferentially oriented films on SrTiO₃(0 0 1), LaAlO₃(0 0 1) and MgO(0 0 1) substrates with the unit cell parameters within 0.390(5) < a < 0.394(9) nm. The nitrogen content is higher in films deposited by PRCLA (0.84-2.40 at.%) as compared to films deposited by RF-PLD with nitrogen plasma (0.10-0.66 at.%). PRCLA with an ammonia gas pulse leads to a higher nitrogen content compared to the films grown with a nitrogen gas pulse, while films deposited by RF-PLD with ammonia plasma reveal only minor nitrogen contents (<0.10 at.%). The amount of the incorporated nitrogen can be tuned by adjusting the deposition parameters. Films deposited by PRCLA have a lower roughness of 1-3 nm compared to 12-18 nm for the films grown by RF-PLD. PRCLA yields partially reduced films, which exhibit electronic conductivity, while films deposited by RF-PLD are insulating. There is also a pronounced influence of the substrate material on the resistivity of the films deposited by PRCLA: films grown on SrTiO₃ substrates exhibit a metallic-like behaviour, while the corresponding films grown on MgO and LaAlO₃ substrates reveal a metal-to-semiconductor/insulator transition. Nitrogen incorporation into the SrTiO₃ films results in an increased optical absorption at 370-500 nm which is associated with N(2p) localized states with the energy about 0.7 eV higher than the valence band energy in strontium titanate. The optical band gap energies in the studied N-substituted SrTiO₃ films are 3.35-3.40 eV.     

Investigation on the effect of Zr doping in ZnO thin films by spray pyrolysis

Zirconium doped zinc oxide thin films with enhanced optical transparency were prepared on Corning 1737 glass substrates at the substrate temperature of 400 °C by spray pyrolysis method for various doping concentrations of zirconium (IV) chloride in the spray solution. The X-ray diffraction studies reveal that the films exhibit hexagonal crystal structure with polycrystalline grains oriented along (0 0 2) direction. The crystalline quality of the films is found to be deteriorating with the increase of doping concentration and acquires amorphous state for higher concentration of 8 at.% in precursor solution. The average transmittance for 5 at.% (solution) zirconium doped ZnO film is significantly increased to ∼92% in the visible region of 500-800 nm. The room temperature photoluminescence (PL) spectra of films show a band edge between 3.41 and 3.2 eV and strong blue emission at 2.8 eV irrespective of doping concentration and however intensity increases consistently with doping levels. The vacuum annealing at 400 °C reduced the resistivity of the films significantly due to the coalescence of grains and the lowest resistivity of 2 × 10⁻³ Ω cm is observed for 3 at.% (solution) Zr doped ZnO films which envisages that it is a good candidate for stable TCO material.     

Laser-assisted synthesis of semiconductor chromium disilicide films

Different photo-assisted techniques were employed for chromium disilicide (CrSi₂) semiconductor film fabrication. Flash evaporation of CrSi₂ powder on the Si substrate heated to ∼740 K leads to the formation (according to XRD study) of amorphous films. Post-annealing at 920 K leads to the formation of polycrystalline CrSi₂ phase. Crystallization is improved by further annealing with 1500 Q-Switched Nd:YAG laser pulses. Optical properties of the as deposited and annealed CrSi₂ films have been investigated in the 240-1100 nm spectral range by using spectroscopic ellipsometry. The formation of CrSi₂ semiconductor phase was additionally confirmed by the temperature dependence of electrical resistance of the films treated by Q-switched Nd:YAG laser. The band gap for intrinsic conductivity results E_g ≅ 0.2 eV. Backward laser-induced film transfer (LIFT) was also used for CrSi₂ film deposition from bulk material on Si substrates. Pulsed CO₂ laser was employed for this purpose, because of transparency of silicon at the 10.6 μm wavelength. Measurements of the electrical resistance of the deposited films as a function of temperature showed their semiconductor behavior (E_g = 6 × 10⁻⁴ eV). Chromium disilicide films were also deposited by congruent pulsed laser ablation deposition on Si substrates either at room temperature or heated to about 740 K. In this last case the deposit exhibits semiconducting properties with E_g ≅ 0.18 eV.     

X-ray diffraction study of the molecular propolis films deposited from an alcohol solution onto the cleavage surfaces of layered V<Subscript>2</Subscript>VI<Subscript>3</Subscript> compounds

The structures of the molecular propolis films deposited from an alcohol solution on the (0001) cleavage surface of layered bismuth selenide and telluride are studied by X-ray diffraction. Despite the chemical interaction between the semiconductor substrates and the organic-substance components, the molecular structural ordering of the propolis films is shown to be identical to that in the films of this substance on the surface of amorphous glass substrates. The chemical and deformation interaction between the organic substance and the layered V₂VI₃ compounds is found to result in the formation of an organic-inorganic sandwich nanostructure at a distance of ∼0.3 μm from the layered crystal-propolis film interface.     

Structural and optical properties of YSZ thin films grown by PLD technique

We report on the structural and optical properties of yttria stabilized zirconia (YSZ) thin films grown by pulsed laser deposition (PLD) technique and in situ crystallized at different substrate temperatures (T_s = 400 °C, 500 °C and 600 °C). Yttria-stabilized zirconia target of ∼1 in. diameter (∼95% density) was fabricated by solid state reaction method for thin film deposition by PLD. The YSZ thin films were grown on an optically polished quartz substrates and the deposition time was 30 min for all the films. XRD analysis shows cubic crystalline phase of YSZ films with preferred orientation along 〈1 1 1〉. The surface roughness was determined by AFM for the films deposited at different substrate temperatures. The nano-sized surface roughness is found to increase with the increase of deposition temperatures. For the optical analysis, a UV-vis-NIR spectrophotometer was used and the optical band gap of ∼5.7 eV was calculated from transmittance curves.     

Characterization of semiconductor nanostructures formed by using ultrathin Si oxide technology

We present a method to form semiconductor nanodots on Si substrates by using ultrathin Si oxide technology and the results on their optical properties. We can form ultra-small semiconductor nanodots with the size of ∼5 nm and ultra-high density of ∼10¹² cm⁻² on Si surfaces covered with ultrathin SiO₂ films of ∼0.3 nm thickness. We focus on photoluminescence and electroluminescence properties of Ge nanodots embedded in Si films. These structures exhibit intense luminescence in the energy region of about 0.8 eV.     

Relationship between the photoluminescence and conductivity of undoped ZnO thin films grown with various oxygen pressures

The pulsed laser deposition (PLD) technique is used to deposit undoped ZnO thin films on glass substrates at 150 °C with different oxygen pressures of 40, 80, 100 and 150 mTorr. X-ray diffraction (XRD) and atomic force microscopy (AFM) studies indicated that the obtained ZnO thin films were hexagonal wurtzite-type structures with strong (0 0 2) c-axis orientation. The relationship between photoluminescence and the conductivity of the ZnO thin films grown by pulsed laser deposition at various oxygen pressures was also discussed. The intensity of the deep-level-emission (DLE) and conductivity generally increased as the oxygen pressure decreased. The intensity of DLE peak was generally proportional to the conductivity. The band gap energy values, determined from transmittance spectra, were around 3.30-3.34 eV, and decreased when the oxygen pressure increased.     

Effects of the substrate temperature on the properties of CuIn5S8 thin films

Structural, optical and electrical properties of CuIn₅S₈ thin films grown by thermal evaporation have been studied relating the effects of substrate heating conditions of these properties. The CuIn₅S₈ thin films were carried out at substrate temperatures in the temperature range 100-300 °C. The effects of heated substrate on their physico-chemical properties were investigated using X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), optical transmission and hot probe method. X-ray diffraction revealed that the films are strong preferred orientation along the (3 1 1) plane upon substrate temperature 200 °C and amorphous for the substrate temperatures below 200 °C. No secondary phases are observed for all the films. The composition is greatly affected by heated substrate. From the optical transmission and reflection, an important absorption coefficient exceeds 10⁵ cm⁻¹ at 800 nm was found. As increasing the substrate temperature, the optical energy band gap decreases from 1.70 eV for the unheated films to 1.25 eV for the deposited films at 300 °C. It was found that CuIn₅S₈ thin film is an n-type semiconductor at 250° C.     

Role of crystal orientation on the magnetic properties of CoFe2O4 thin films grown on Si (1 0 0) and Al2O3 (0 0 0 1) substrates using pulsed laser deposition

We report the influence of crystal orientation on the magnetic properties of CoFe₂O₄ (CFO) thin films grown on single crystal Si (1 0 0) and c-cut sapphire (Al₂O₃) (0 0 0 1) substrates using pulsed laser deposition technique. The thickness was varied from 200 to 50 nm for CFO films grown on Si substrates, while it was fixed at 200 nm for CFO films grown on Al₂O₃ substrates. We observed that the 200 and 100 nm thick CFO-Si films grew in both (1 1 1) and (3 1 1) directions and displayed out-of-plane anisotropy, whereas the 50 nm thick CFO-Si film showed only an (1 1 1) orientation and an in-plane anisotropy. The 200 nm thick CFO film grown on an Al₂O₃ substrate was also found to show a complete (1 1 1) orientation and a strong in-plane anisotropy. These observations pointed to a definite relation between the crystalline orientation and the observed magnetic anisotropy in the CFO thin films.     

Photoluminescence properties of nitrogen-doped ZnO films deposited on ZnO single crystal substrates by the plasma-assisted reactive evaporation method

Photoluminescence (PL) spectra of nitrogen-doped ZnO films (ZnO:N films) grown epitaxially on n-type ZnO single crystal substrates by using the plasma-assisted reactive evaporation method were measured at 5 K. In PL spectra, free exciton emission at about 3.375 eV was very strong and emissions at 3.334 and 3.31 eV were observed. These two emissions are discussed in this paper. The nitrogen concentration in ZnO:N films measured by secondary ion mass spectroscopy was 10^19-20 cm⁻³. Current-voltage characteristics of the junction consisting of an n-type ZnO single crystal substrate and ZnO:N film showed good rectification. Also, ultraviolet radiation and visible light were emitted from this junction under a forward bias at room temperature. It is therefore thought that ZnO:N films have good crystallinity and that doped nitrogen atoms play a role as acceptors in ZnO:N films to form a good pn junction. From these phenomena and the excitation intensity dependency of PL spectra, emissions at 3.334 and 3.31 eV were assigned to neutral acceptor-bound exciton (A⁰X) emission and a donor-acceptor pair (DAP) emission due to doped nitrogen, respectively.     

X-ray diffraction investigation of the structure of propolis films

The structure of films of a biological organic material (propolis) on inorganic substrates is investigated for the first time. It is established that, despite the complex chemical composition (involving more than 300 different components), the propolis films prepared from an alcohol solution on amorphous glass substrates and on semiconductor substrates with a small number of dangling bonds have a crystal structure.     

Growth, coalescence, and electrical resistivity of thin Pt films grown by dc magnetron sputtering on SiO2

Ultra thin platinum films were grown by dc magnetron sputtering on thermally oxidized Si (1 0 0) substrates. The electrical resistance of the films was monitored in situ during growth. The coalescence thickness was determined for various growth temperatures and found to increase from 1.1 nm for films grown at room temperature to 3.3 nm for films grown at 400 °C. A continuous film was formed at a thickness of 2.9 nm at room temperature and 7.5 nm at 400 °C. The room temperature electrical resistivity decreases with increased growth temperature, while the in-plain grain size and the surface roughness, measured with a scanning tunneling microscope (STM), increase. Furthermore, the temperature dependence of the film electrical resistance was explored at various stages during growth.     

Structural and optical characteristics of spin-coated ZnO thin films

Zinc oxide (ZnO) thin films were deposited onto glass substrates by spin-coating method, from a precursor solution containing zinc acetate, ethanol and ammonium hydroxide. After deposition, the films were heated at a temperature of 100 °C in order to remove unwanted materials. Finally, the films were annealed at 500 °C for complete oxidation. X-ray diffraction showed that ZnO films were polycrystalline and have a hexagonal (wurtzite) structure. The crystallites are preferentially oriented with (0 0 2) planes parallel to the substrate surface. The films have a high transparency (more than 75%) in the spectral range from 450 nm to 1300 nm. The analysis of absorption spectra shows the direct nature of band-to-band transitions. The optical bandgap energy ranges between 3.15 eV and 3.25 eV.Some correlations between the processing parameters (spinning speed, temperature of post deposition heat treatment) and structure and optical characteristics of the respective thin films were established.     

Effect of crystallinity on proton conductivity in yttrium-doped barium zirconate thin films

The effect of crystallinity on proton conductivity in amorphous, single crystal and polycrystal yttrium-doped barium zirconate (BYZ) thin films grown 120 nm in thickness on amorphous (quartz) and single crystal MgO(100) substrates has been studied. The conductivity was measured in the temperature range of 150 ~ 350 °C. By altering the film deposition temperature, varying degrees of crystallization and microstructure were observed by x-ray diffraction and transmission electron microscopy. The epitaxial BYZ film grown on MgO(100) substrate at 900 °C showed the highest proton conductivity among other samples with an activation energy of 0.45 eV, whereas polycrystalline and amorphous BYZ films showed lower conductivities due to grain boundaries in their granular microstructure.     

Dependence of the microstructural properties on the substrate temperature in strained CdTe (1 0 0)/GaAs (1 0 0) heterostructures

CdTe thin films were grown on GaAs (1 0 0) substrates by using molecular beam epitaxy at various temperatures. The bright-field transmission electron microscopy (TEM) images and the high-resolution TEM (HRTEM) images showed that the crystallinity of CdTe epilayers grown on GaAs substrates was improved by increasing the substrate temperature. The result of selected-area electron diffraction pattern (SADP) showed that the orientation of the grown CdTe thin films was the (1 0 0) orientation. The lattice constant the strain, and the stress of the CdTe thin film grown on the GaAs substrate were determined from the SADP result. Based on the SADP and HRTEM results, a possible atomic arrangement for the CdTe/GaAs heterostructure is presented.     

Optical properties of p-type CuAlO2 thin film grown by rf magnetron sputtering

We report the structural and optical properties of copper aluminium oxide (CuAlO₂) thin films, which were prepared on c-plane sapphire substrates by the radio frequency magnetron sputtering method. X-ray photoelectron spectroscopy (XPS) along with X-ray diffraction (XRD) analysis confirms that the films consist of delafossite CuAlO₂ phase only. The optical absorption studies show the indirect and direct bandgap is 1.8 eV and 3.45 eV, respectively. Room temperature photoluminescence (PL) measurements show three emission peaks at 360 nm (3.45 eV), 470 nm (2.63 eV) and 590 nm (2.1 eV). The first one is near band edge emission while the other two are originated from defects.     

Physical properties of ZnO thin films deposited by spray pyrolysis technique

Thin films of ZnO have been prepared on glass substrates at different thicknesses by spray pyrolysis technique using 0.2 M aqueous solution of zinc acetate. X-ray diffraction reveals that the films are polycrystalline in nature having hexagonal wurtzite type crystal structure. The resistivity at room temperature is of the order 10⁻² Ω cm and decreased as the temperature increased. Films are highly transparent in the visible region. The dependence of the refractive index, n, and extinction coefficient, k, on the wavelength for a sprayed film is also reported. Optical bandgap, E_g, has been reported for the films. A shift from E_g = 3.21 eV to 3.31 eV has been observed for deposited films.