Effect of the thermal and hydrothermal treatment on textural properties of Zr-MCM-41 mesoporous molecular sieve

Zr-containing mesoporous molecular sieves were synthesized by hydrothermal method using cetyltrimethyl ammonium bromide as a template and sodium silicate and zirconium sulfate as raw materials. The structure and morphology of the synthesized samples were characterized via various physicochemical methods, including X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, solid state nuclear magnetic resonance (²⁹Si MAS-NMR) techniques, thermal gravimetric-differential scanning calorimeter (TG-DSC) and N₂ physical adsorption, respectively. The effect of the different initial ZrO₂:SiO₂ molar ratio, the different thermal treatment temperature and the different hydrothermal treatment time on textural property was investigated. The experimental results reveal that the as synthesized samples possess a typical mesoporous structure of MCM-41. On the other hand, the specific surface area and pore volume of the synthesized Zr-MCM-41 mesoporous molecular sieve decrease with the increase of the amount of zirconium incorporated in the starting material, the rise of thermal treatment temperature and the prolonging of hydrothermal treatment time, the mesoporous ordering becomes poor. Also, when the molar ratio of ZrO₂:SiO₂ in the starting material is 0.1, the mesoporous structure of the Zr-MCM-41 mesoporous molecular sieve still retains after calcination at 750 °C for 3 h or hydrothermal treatment at 100 °C for 6 d, and have specific surface areas of 423.9 and 563.9 m²/g, respectively.     

Thermal stability and surface acidity of mesoporous silica doubly doped by incorporation of sulfate and zirconium ions

A sulfated Si-Zr-MCM-41 solid with highly ordered mesostructure was synthesized through a templated synthesis route where the CTAB surfactant was used as template. During the synthesis procedure, various amounts of (NH₄)₂SO₄ were added into the mixed solution of Zr and Si precursors to in situ sulfate the MCM-41 solids, aiming to enhance the acidity and thermal stability. The resultant materials showed a long-range ordered hexagonal arrangement with high surface area larger than 797 m²/g and an average pore size distributed at approximate 2.5-2.8 nm. The high-resolution TEM observations confirmed that the order of the mesostructure gained when the molar ratio of SO₄²⁻/(ZrO₂ + SiO₂) increased from 0.1 to 0.3 but decreased as it reached 0.5, which is consistent with the results of ²⁹Si MAS-NMR and XRD analysis. Compared to Si-MCM-41, the (Q² + Q³)/Q⁴ ratio derived from the NMR spectra of the Zr-doped sample was higher, indicating that zirconium atoms were incorporated into the silica framework. Unexpectedly, in situ sulfation does not enhance the surface Brönsted acidity, most likely due to the sulfur retained within the bulk of the materials; however, it indeed improved the thermal stability of the solid and long-range order of the structure.     

Synthesis and characterization of ionic liquid-functionalized alumino-silicate MCM-41 hybrid mesoporous materials

Ionic liquid-functionalized alumino-silicate MCM-41 hybrid mesoporous materials have been synthesized with two-step approach, by means of in situ skeleton doping with aluminium and post surface grafting with N-methylimidazole ionic liquid groups. The samples were characterized by X-ray diffraction (XRD), high resolution transmission electron microscope (HRTEM), N₂ adsorption-desorption, Fourier transform infrared (FTIR) spectra, ²⁷Al and ¹³C MAS NMR spectra and temperature-programmed desorption (TPD) of NH₃. The results indicated that the bifunctionalized MCM-41 possessed ordered mesostructure. Aluminium was efficiently introduced into the framework of the mesostructure, generating Lewis and Brönsted acid sites. N-methylimidazole ionic liquid groups were covalently grafted onto the surface of mesoporous materials. The as-synthesized bifunctional MCM-41 showed good catalytic performance in the coupling reaction of CO₂ and propylene oxide.     

Catalytic performance of grafted Al-MCM-41 in hydroisomerization of n-dodecane

Pt/Al-MCM-41 samples with constant metal loading but various Si/Al ratios were prepared by reacting pure silica MCM-41 with different concentrations of polyaluminum chloride (PAC) aqueous solutions. It is observed that the molar ratio of Si/Al decreases from 24.3 to 11.2 when increase the PAC concentration from 0.1 M to 2.0 M. A better retention of structural integrity could be seen when the PAC concentration is below 1.0 M. The Lewis acid increases while incorporating aluminum into the framework of MCM-41, while the Brönsted acid reaches a maximum value when the PAC concentration is 1.0 M. Hydroisomerization of n-dodecane was carried out over these Pt/Al-MCM-41 samples. It is demonstrated that increasing the aluminum content generally can trigger a higher n-dodecane conversion, but a lower isomers selectivity due to the increasing strong Brönsted acid sites. And the Pt/Al-MCM-41 post-synthesized by the PAC concentration at 1.0 M shows highest isomers selectivity and yield corresponding to the maximum medium Brönsted acid quantities (24.15 μmol/g).     

H and P solid-state NMR of trimethylphosphine adsorbed on heteropolytungstate supported on silica

Trimethylphosphine (TMP) has been used as an NMR probe in order to determine the acidity of Keggin-type 12-tungstophosphoric heteropolyacid (HPW), pure and supported on silica, dehydrated at 473 K. Adsorption of TMP on pure dehydrated HPW leads to the formation of trimethylphosphonium ions (TMPH⁺) characteristic of the presence of strong Brönsted acid sites. TMP replaces the water molecules lost by dryness and allows the Keggin secondary structure to recover.Silica interacts with TMP by two kinds of acid sites: with weak acid support sites through the isolated silanol groups and with strong Brönsted acid, which lead to the formation of TMPH⁺, through the hydrogen-bonded silanol groups. Silica only interacts with HPW through its isolated silanol groups.     

Synthesis and characterization of Co (Ni or Cu)-MCM-41 mesoporous molecular sieves with different amount of metal obtained by using microwave irradiation method

Co (Ni or Cu)-MCM-41 mesoporous molecular sieves with different amount of metal were synthesized by using cetyltrimethyl ammonium bromide as a template and by a novel microwave irradiation method. These samples were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and N₂ physical adsorption. The experimental results show that Co (Ni or Cu)-MCM-41 mesoporous molecular sieves were successfully synthesized. When the as-synthesized samples were calcined at 550 °C for 10 h, the template was effectively removed. Under microwave irradiation condition, Co-MCM-41 mesoporous molecular sieves have specific surface areas in a range of 745.7-1188.8 m²/g and average pore sizes in a range of 2.46-2.75 nm; Ni-MCM-41 mesoporous molecular sieves have specific surface areas in a range of 625.8-1161.3 m²/g and average pore sizes of ca. 2.7 nm; Cu-MCM-41 mesoporous molecular sieves have specific surface areas in a range of 601.6-1142.9 m²/g and average pore sizes in a range of 2.46-2.76 nm. On the other hand, with increasing the introduced metal amount, the specific surface area and pore volume of the synthesized Co (Ni or Cu)-MCM-41 mesoporous molecular sieves became small, and the mesoporous ordering of the samples became poor. Under the comparable synthesis conditions, the synthesized Co-MCM-41 mesoporous molecular sieve has a bigger specific surface area and a more uniform pore distribution as compared with the synthesized Ni-MCM-41and Cu-MCM-41 mesoporous molecular sieves.     

Stability and textural properties of cobalt incorporated MCM-48 mesoporous molecular sieve

Transition metal cobalt incorporated MCM-48 mesoporous molecular sieves (CoMCM-48) with different Co contents were synthesized hydrothermally at 120 °C for 24 h by directly adding fluoride ions to the initial gel. The resulting materials were characterized by means of XRD, TEM, FT-IR, UV-vis, TPR and N₂ physical adsorption, respectively. The effect of various factors, such as the Si/Co molar ratio, calcination temperature and hydrothermal treatment time, on the crystalline structure and textural properties of CoMCM-48 was investigated in detail. The results show that the CoMCM-48 mesoporous materials with high specific surface area were successfully synthesized. A small amount substitution of Co for Si in MCM-48 did not significantly change the textural properties while the higher cobalt incorporated leads to decrease of the surface area and deterioration of structural regularity. Furthermore, the resulting CoMCM-48 still retained the cubic mesoporous framework even after calcination at 800 °C for 4 h or hydrothermal treatment at 100 °C for 24 h.     

Assessment of surface acidity in mesoporous materials containing aluminum and titanium

The surface acidity of mesoporous molecular sieves of aluminum and titanium was evaluated using four different techniques: n-butylamine volumetry, cyclohexylamine thermodesorption, temperature-programmed desorption of ammonia and adsorption of pyridine. The nature, strength and concentration of the acid sites were determined and correlated to the results of a probe reaction of anthracene oxidation to 9,10-anthraquinone (in liquid phase). In general, the surface acidity was highly influenced by the nature, location and coordination of the metal species (Al and Ti) in the mesoporous samples. Moderate to strong Brönsted acid sites were identified for the Al-MCM-41 sample in a large temperature range. For mesoporous materials containing Ti, the acidity was represented by a combination of weak to moderate Brönsted and Lewis acid sites. The Ti-HMS sample exhibits a higher acidity of moderate strength together with a well-balanced concentration of Brönsted and Lewis acid sites, which enhanced both conversion and selectivity in the oxidation reaction of anthracene.     

Adsorptive removal and kinetics of methylene blue from aqueous solution using NiO/MCM-41 composite

Highly ordered mesoporous material MCM-41 was synthesized from tetraethylorthosilicate (TEOS) as Si source and cetyltrimethylammonium bromide (CTAB) as template. Well-dispersed NiO nanoparticles were introduced into the highly ordered mesoporous MCM-41 by chemical precipitation method to prepare the highly ordered mesoporous NiO/MCM-41 composite. X-ray diffraction (XRD) analysis, transmission electron microscopy (TEM) and high-resolution TEM (HRTEM), and nitrogen adsorption–desorption measurement were used to examine the morphology and the microstructure of the obtained composite. The morphological study clearly revealed that the synthesized NiO/MCM-41 composite has a highly ordered mesoporous structure with a specific surface area of 435.9 m² g⁻¹. A possible formation mechanism is preliminary proposed for the formation of the nanostructure. The adsorption performance of NiO/MCM-41 composite as an adsorbent was further demonstrated in the removal azo dyes of methyl orange (MO), Congo red (CR), methylene blue (MB) and rhodaming B (RB) under visible light irradiation and dark, respectively. The kinetics and mechanism of removal methylene blue were studied. The results show that NiO/MCM-41 composite has a good removal capacity for organic pollutant MB from the wastewater under the room temperature. Compared with MCM-41 and NiO nanoparticles, 54.2% and 100% higher removal rate were obtained by the NiO/MCM-41 composite.     

A novel one-step synthesis of mesostructured silica-pillared clay with highly ordered gallery organic-inorganic hybrid frame

A new class of organic-inorganic hybrid mesostructured silica-pillared clay (HSPC) has been prepared through the surfactant directed assembly of organosilica in the galleries of montmorillonite. The surfactant templates were removed from the pores by solvent-extraction. The products were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), nitrogen adsorption-desorption measurements, solid-state ²⁹Si and ¹³C NMR, and Fourier-transform infrared (FT-IR) spectra. XRD patterns indicated a regular interstratifications of the clay layers for HSPCs. Depending on loading of phenyl groups, HSPCs had BET surface areas of 395-602 m² g⁻¹, pore volumes of 0.34-0.79 cm³g⁻¹, and the framework pore sizes in the supermicropore to small mesopore range (1.3-2.6 nm). HSPCs were hydrophobic and acidic. The number of silanol groups on the surface of HSPC materials has been titrated by a surface reaction with hexamethyldisilazane, followed by quantification of the liberated NH₃. Based on this method extracted HPCHs have high silanol numbers, a very important feature with respect to the amount of catalytic sites that can eventually be grafted onto the surface.     

Fabrication and application of highly ordered mesoporous Co3O4, NiO, and their metals

Highly ordered mesoporous Co₃O₄, NiO, and their metals were synthesized by nanocasting method using there corresponding mesoporous SBA-15 silica as a template. The obtained porous metal oxides have high surface areas, large pore volume, and a narrow pore size distribution. The N₂-adsorption data for mesoporous metal oxides have provided the BET area of 257.7 m² g⁻¹ and the total pore volume of 0.46 cm³ g⁻¹. The mesoporous metals were employed as a catalyst in the synthesis of (S)-3-pyrrolidinol from chiral (S)-4-chloro-3-hydroxybutyronitrile, and a high yield to (S)-3-pyrrolidinol-salt was obtained on the mesoporous Co metal catalyst.     

Applicability of classical methods of pore size analysis for MCM-41 and SBA-15 silicas

Two most popular ordered mesoporous silicas, MCM-41 and SBA-15, exhibiting uniform mesopores of approximately cylindrical shapes, have been used as model adsorbents for verification, improvement and/or development of adsorption-based methods for characterization nanoporous materials. While the applicability of the classical methods for pore size analysis was widely examined by employing MCM-41 materials, the large-pore materials such as SBA-15 did not find adequate usage for this type of studies. The current work addresses the issue of applicability of classical methods such as Barrett-Joyner-Hallenda (BJH) and Broekhoff-de Boer (BdB) methods for pore size analysis of mesoporous silicas by using MCM-41 and SBA-15 materials as model adsorbents. In addition, the Kruk-Jaroniec-Sayari (KJS) method, which is based on the BJH algorithm and experimental relations for the pore width and statistical film thickness, is discussed too. While the MCM-41 materials cover the range of small mesopores (about 2-7 nm), the inclusion of SBA-15 materials allowed us to examine the range of the pore diameters up to about 12 nm. The high quality MCM-41 and SBA-15 samples are used to discuss the applicability and limitations of the aforementioned characterization methods and to propose some recommendations for pore size analysis of these materials.     

Effect of the Si/Ce molar ratio on the textural properties of rare earth element cerium incorporated mesoporous molecular sieves obtained room temperature

Rare earth Ce-incorporated MCM-41 mesoporous molecular sieves (CeMCM-41) were synthesized via a direct and nonhydrothermal method at room temperature from sodium silicate and ammonium cerium (IV) nitrate as raw materials. Cetyltrimethyl ammonium bromide (CTAB) was used as a template. The resultant samples were characterized by means of powder X-ray diffraction (XRD), transmission electron microscope (TEM), Fourier transform infrared spectroscopy (FT-IR), diffuse reflectance ultraviolet–visible spectroscopy (UV–vis) and N₂ physical adsorption, respectively. The effect of the Si/Ce molar ratio on the crystalline structure and textural properties of CeMCM-41 was also investigated. The experimental results show that ordered CeMCM-41 mesoporous molecular sieves were successfully synthesized at room temperature and the resultant mesoporous materials have specific surface areas in the range of 594–1369 m²/g and average pore sizes in the range of ca. 2.5–2.8 nm. It has been found that the structural properties are strongly related to the amounts of cerium incorporation. When the cerium content increased in the samples, the intensity of the peak (1 0 0) was gradually reduced, and the surface area and structural regularity were diminished.     

Highly selective epoxidation of styrene over mesoporous Au-Ti-SBA-15 via photocatalysis process: Synthesis, characterization, and catalytic application

Highly ordered Au-Ti-SBA-15 mesoporous molecular sieves were successfully synthesized by one-pot hydrothermal synthesis in acid medium, and were characterized by XRD, UV-vis, SEM, element-mapping, HRTEM, N₂ adsorption, XPS, ²⁹Si MAS NMR, NH₃-TPD and FT-IR. The as-prepared Au-Ti-SBA-15 samples were possessed of highly ordered mesostructures with larger pore diameter, pore volume and uniform mesopore size distribution. In the oxidation of styrene with H₂O₂ as the oxidant over Au-Ti-SBA-15 catalyst under photo-irradiation, reaction parameters, such as molar ratio of H₂O₂ to styrene, reaction time, solvent, the amount of catalyst, catalyst species, and the amount of 3% NaOH, were conditioned at length. As a result, highly selective epoxidation of styrene over catalyst was carried out perfectly for 10 min with high TOF of 4.75 × 10³ min⁻¹.     

Adsorption characterization of surfactant-templated ordered mesoporous silicas synthesized with and without hydrothermal treatment

This work reports a systematic study of ordered mesoporous silicas (OMSs) synthesized with and without hydrothermal treatment at 373 K for a series of surfactants of different alkyl chain length (from C10 to C18). For these samples nitrogen adsorption and small angle X-ray scattering (SAXS) data were measured to characterize their adsorption and surface properties. Namely, nitrogen adsorption isotherms were used to evaluate their specific surface area, pore volume and pore size distribution, whereas SAXS data provided information about their structural ordering. It is shown that while the room temperature synthesis afforded OMS samples with cubic MCM-48 structure, an additional 5-day hydrothermal treatment of these samples at 373 K caused their transformation to MCM-41 (two-dimensional hexagonal structure) and improved their pore uniformity, which was manifested by reducing the width of pore size distribution.     

An alternative method to remove PEO-PPO-PEO template in organic-inorganic mesoporous nanocomposites by sulfuric acid extraction

Sulfuric acid is used as an extraction agent to remove PEO-PPO-PEO templates in the organic-inorganic mesoporous nanocomposites from the triconstituent co-assembly which includes the low-polymerized phenolic resins, TEOS and triblock copolymer F127. The XRD and TEM results show well ordered mesostructure after extraction with sulfuric acid. As followed from the N₂ sorption isotherms the extracted composites possess high surface areas (332-367 m²/g), large pore volumes (0.66-0.78 cm³/g), and large pore sizes (about 10.7 nm). The FT-IR analysis reveals almost complete elimination of triblock copolymer F127, and the maintenance of organic groups. This method shows potentials in removing templates from nanocomposites containing functional moieties.     

Structure and acid-base properties of surface-modified mesoporous silica

A series of surface-modified mesoporous silica endowing with acid-base properties have been successfully synthesized in one pot by in situ introduction of zirconium and magnesium salts into the initial mixture of synthesizing mesoporous silica (SBA-15) and this method combines into a single step to form a novel material with a periodically ordered mesoporous backbone and specific chemical reactivity of the acid-basic sites. X-ray diffraction, high-resolution transmission electron microscopes (HRTEM), N₂ adsorption, FT-IR transmission spectra, ²⁹Si MAS NMR spectra, NH₃- and CO₂-temperature programmed desorption (TPD) are employed to characterize the titled mesoporous materials. The results indicate that the product possesses excellent acid-basic properties with well mesoporous structure, which make it promising for their application in heterogeneous catalysis and adsorption-separation processes.     

Single crystals of mesoporous tungstenosilicate W-MCM-48 molecular sieves for the conversion of methylcyclopentane (MCP)

Highly ordered W-MCM-48 mesoporous materials containing isolated W atoms in tetrahedral framework positions were successfully synthesized following the S⁺I⁻ pathway, up to a Si/W of 40. When tungsten content was increased up to a Si/W of 20, the ordered cubic structure was only partially maintained, and for a Si/W of 10 an amorphous phase was obtained. Highly isolated tetrahedral framework tungsten atoms in the W-MCM-48 with a Si/W of 40, have been identified by UV-vis band at 225 nm, IR-TF band at 970 cm⁻¹ and XRD. The W 4f XPS results suggest that the tungsten atoms exist in two oxidation states, W⁴⁺ and W⁵⁺. The morphology of the samples varies as a function of tungsten content. The W-MCM-48 samples with a Si/W ratio of 40 existed as crystals with a unique crystalline morphology consisting of cubes truncated rhombic dodecahedrons belonging to the cubic Ia3d space group, while the samples with a Si/W ratio of 20 exhibited a different morphology consisting of spheres and cubes truncated by rhombic dodecahedrons. A comparison of samples with Si/W of ∞, Si/W of 40 and Si/W of 20 was performed using the conversion of MCP carried out at 450 °C under H₂.     

A metal-ion-assisted assembly approach to synthesize disulfide-bridged periodical mesoporous organosilicas with high sulfide contents and efficient adsorption

Well-ordered two-dimensional (2D) hexagonal periodic mesoporous organosilicas (PMOs) with a high content of disulfide groups have been prepared by a simple metal-ions-assisted amphiphilic surfactant templating process under a strong acidic condition. Long-chain organic bridge silane, bis(triethoxysilylpropyl)disulfide (BTSPDS) was used as a precursor which can be co-condensed with tetraethoxysilane (TEOS) to assemble with the triblock copolymer Pluronic P123 template and to construct the mesostructured organic-inorganic frameworks. The content of disulfide functional groups is up to 20% (BTSPDS molar content in the initial silane mixture) incorporated into the framework. The obtained ordered mesoporous DS-PMO materials have relatively high BET surface area (∼580 m²/g), large uniform pore size (up to 6.3 nm) and thick pore walls (thickness up to 7.1 nm), because of the long-chain disulfide bridges. The metal ions such as Zn²⁺ formed the four-coordination complex with two sulfides of BTSPDS and ethylene oxide moieties of P123 template, which could enhance the interaction between the “soft” long disulfide groups and P123 template, thus improving the mesostructural regularity correspondingly. The disulfide-bridged PMO materials exhibit excellent hydrothermal stability in boiling water for 5 days, probably due to the thick pore walls. SEM images show that after the hydrothermal treatment, the morphology of the ordered disulfide-bridged PMO materials is retained, as that of the wheat-like SBA-15. Excellent adsorption efficiency (∼716 mg/g) for Hg²⁺ ions is observed, suggesting a potential application in removal of heavy metal ions in wastewater.     

Synthesis and characterization of MCM-41 decorated with CuO particles

CuO particles have decorated on the external surface of MCM-41 by in situ introducing cupric nitrate during the hydrothermal synthesis followed by the calcination. The textural and structural properties of CuO/MCM-41 are compared with those of pure MCM-41. The results show that CuO particles are about 40 nm in size and are not agglomerated. The addition of cupric nitrate to the synthesis gel leads to materials with somewhat reduced quality as evidenced from X-ray diffraction patterns and nitrogen adsorption measurements. CuO/MCM-41 is less ordered relative to pure MCM-41 and there are inter-aggregate pores resulting in a higher average pore diameter in the material. The formation of CuO particles on the external surface of MCM-41 and the possible reason for the less ordered structure of CuO/MCM-41 are also discussed in the present paper.