Composition of Ta2O5 stacked films on N2O- and NH3-nitrided Si

The composition and microstructure of rf sputtered 20 nm Ta₂O₅ on N₂O or NH₃ Rapid Thermal Nitrided (RTN) Si substrates have been investigated by X-ray photoelectron spectroscopy. RTN at 800 and 850 °C is effective to suppress active oxidation of Si. There is no evidence for the presence of SiO₂ at Si interface. A lightly nitrided surface is established in both cases without a formation of detectable oxynitride layer at Si. A layered nature of the films is observed, with stoichiometric tantalum pentoxide at and close to the films’ surface. In the depth, the films are mixed ones whose composition depends on the nitridation ambient. N₂O treatment stimulates oxidation processes during the film deposition while NH₃ nitridation results to a less effective oxidation and produces Ta-silicate like film. The correlation between the composition of the interfacial regions and the nitridation gas is also discussed. The results suggest that hydrogen, as a component of nitridation ambient, plays significant role in the reactions controlling the exact composition of the deposited Ta₂O₅, activating reactions with nitrogen. Nitrogen related reactions likely occur with NH₃ processing but do not with N₂O one. The presence of nitrogen feature is not detected in N₂O-samples spectra at all. In the integration perspective, preliminary RTN of Si in N₂O or NH₃ could be a suitable way to produce layered Ta₂O₅-based films with more or less presence of tantalum silicate with a trace of nitrogen, either only at the interface with Si (N₂O-process) or in the whole film (NH₃-process).     

Charge trapping at Pt/high-k dielectric (Ta2O5) interface

A detailed analysis of the effects of constant low current injection was done, both in accumulation (J=0.001-0.2 mA cm⁻²) and in inversion (J=0.001-0.04 mA/cm²). The samples under investigation were metal-insulator-silicon structures containing high-k dielectric Ta₂O₅ radio frequency sputtered on p-type Si wafers, with Pt metal gate electrodes. The obtained results were compared with the ones obtained for Al gate samples. This experiment confirms the occurrence of charge trapping in the case of high-work-function Pt as metal. The effect has been attributed to emitting of electrons into the Pt conduction band during which creation of empty traps in the dielectric occurs, which then attract electrons injected in the dielectric. In order to examine the reversibility of the process, successive short runs as well as long runs (up to 10000 s) were performed.     

Microstructure and interfacial properties of HfO2-Al2O3 nanolaminate films

High-k HfO₂-Al₂O₃ composite gate dielectric thin films on Si(1 0 0) have been deposited by means of magnetron sputtering. The microstructure and interfacial characteristics of the HfO₂-Al₂O₃ films have been investigated by using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and spectroscopic ellipsometry (SE). Analysis by XRD has confirmed that an amorphous structure of the HfO₂-Al₂O₃ composite films is maintained up to an annealing temperature of 800 °C, which is much higher than that of pure HfO₂ thin films. FTIR characterization indicates that the growth of the interfacial SiO₂ layer is effectively suppressed when the annealing temperature is as low as 800 °C, which is also confirmed by spectroscopy ellipsometry measurement. These results clearly show that the crystallization temperature of the nanolaminate HfO₂-Al₂O₃ composite films has been increased compared to pure HfO₂ films. Al₂O₃ as a passivation barrier for HfO₂ high-k dielectrics prevents oxygen diffusion and the interfacial layer growth effectively.     

Stabilization of a very high-k crystalline ZrO2 phase by post deposition annealing of atomic layer deposited ZrO2/La2O3 dielectrics on germanium

The impact of the ZrO₂/La₂O₃ film thickness ratio and the post deposition annealing in the temperature range between 400 °C and 600 °C on the electrical properties of ultrathin ZrO₂/La₂O₃ high-k dielectrics grown by atomic layer deposition on (1 0 0) germanium is investigated. As-deposited stacks have a relative dielectric constant of 24 which is increased to a value of 35 after annealing at 500 °C due to the stabilization of tetragonal/cubic ZrO₂ phases. This effect depends on the absolute thickness of ZrO₂ within the dielectric stack and is limited due to possible interfacial reactions at the oxide/Ge interface. We show that adequate processing leads to very high-k dielectrics with EOT values below 1 nm, leakage current densities in the range of 0.01 A/cm², and interface trap densities in the range of 2-5 × 10¹² eV⁻¹ cm⁻².     

Effect of Ti doping on Ta2O5 stacks with Ru and Al gates

The Ti-doped Ta₂O₅ thin films (<10 nm) obtained by rf sputtering are studied with respect to their composition, dielectric and electrical properties. The incorporation of Ti is performed by two methods - a surface doping, where a thin Ti layer is deposited on the top of Ta₂O₅ and a bulk doping where the Ti layer is sandwiched between two layers of Ta₂O₅. The effect of the process parameters (the method and level of doping) on the elemental distribution in-depth of the films is investigated by the time of flight secondary ion mass spectroscopy (ToF-SIMS). The Ti and Ta₂O₅ are intermixed throughout the whole thickness but the layers are very inhomogeneous. Two sub-layers exist in all the samples — a near interfacial region which is a mixture of Ta-, Ti-, Si-oxides as well as TaSiO, and an upper Ti-doped Ta₂O₅ sub-layer. For both methods of doping, Ti tends to pile-up at the Si interface. The electrical characterisation is performed on capacitors with Al- and Ru-gate electrodes. The two types of MIS structures exhibit distinctly different electrical behavior: the Ru gate provides higher dielectric permittivity while the stacks with Al electrode are better in terms of leakage currents. The specific metal-dielectric reactions and metal-induced electrically active defects for each metal electrode/high-k dielectric stack define its particular electrical behavior. It is demonstrated that the Ti doping of Ta₂O₅ is a way of remarkable improvement of leakage characteristics (the current reduction with more than four orders of magnitude as compared with undoped Ta₂O₅) of Ru-gated capacitors which originates from Ti induced suppression of the oxygen vacancy related defects.     

Fabrication and characterization of La-doped HfO2 gate dielectrics by metal-organic chemical vapor deposition

La-doped HfO₂ gate dielectric thin films have been deposited on Si substrates using La(acac)₃ and Hf(acac)₄ (acac = 2,4-pentanedionate) mixing sources by low-pressure metal-organic chemical vapor deposition (MOCVD). The structure, thermal stability, and electrical properties of La-doped HfO₂ films have been investigated. Inductive coupled plasma analyses confirm that the La content ranging from 1 to 5 mol% is involved in the films. The films show smaller roughness of ∼0.5 nm and improved thermal stability up to 750 °C. The La-doped HfO₂ films on Pt-coated Si and fused quartz substrates have an intrinsic dielectric constant of ∼28 at 1 MHz and a band gap of 5.6 eV, respectively. X-ray photoelectron spectroscopy analyses reveal that the interfacial layer is Hf-based silicate. The reliable value of equivalent oxide thickness (EOT) around 1.2 nm has been obtained, but with a large leakage current density of 3 A/cm² at V_g = 1V + V_fb. MOCVD-derived La-doped HfO₂ is demonstrated to be a potential high-k gate dielectric film for next generation metal oxide semiconductor field effect transistor applications.     

Stability of La2O3 and GeO2 passivated Ge surfaces during ALD of ZrO2 high-k dielectric

La₂O₃ grown by atomic layer deposition (ALD) and thermally grown GeO₂ are used to establish effective electrical surface passivations on n-type (1 0 0)-Ge substrates for high-k ZrO₂ dielectrics, grown by ALD at 250 °C substrate temperature. The electrical characterization of MOS capacitors indicates an impact of the Ge-surface passivation on the interfacial trap density and the frequency dependent capacitance in the inversion regime. Lower interface trap densities can be obtained for GeO₂ based passivation even though a chemical decomposition of the oxidation states occur during the ALD of ZrO₂. As a consequence the formation of a ZrGeO_x compound inside the ZrO₂ matrix and a decline of the interfacial GeO₂ are observed. The La₂O₃ passivation provides a stable amorphous lanthanum germanate phase at the Ge interface but also traces of Zr germanate are indicated by X-ray-Photoelectron-Spectroscopy and Transmission-Electron-Microscopy.     

Stress-induced leakage currents of the RF sputtered Ta2O5 on N-implanted silicon

The electrical (C-V and I-V) and reliability (constant current stress technique) properties of RF sputtered 30 nm thick Ta₂O₅ on N-implanted Si have been investigated. The dependence on the parameters of both Ta₂O₅ and the implanted interfacial layers on the stress time are discussed. The leakage current characteristics are analyzed by previously proposed comprehensive model. It is established that the reliability of the Ta₂O₅-based capacitors can be effectively improved if the Si substrate is a subject to preliminary N-implantation—markedly smaller stress induced leakage current as compared to the films on bare Si are detected. The stress mainly affects the properties of the interfacial layer and the generation of neutral traps is identified to be the primary cause for the stress-induced degradation. It is concluded that the implantation results in a strengthening of the interfacial layer against stress degradation.     

Dielectric properties of continuous composition spreaded MgO-Ta2O5 thin films

The dielectric properties of MgO-Ta₂O₅ continuous composition spread (CCS) thin films were investigated. The MgO-Ta₂O₅ CCS thin films were deposited on Pt/Ti/SiO₂/Si substrates by off-Axis RF magnetron sputtering system, and then the films were annealed at 350 °C with rapid thermal annealing system in vacuum. The dielectric constant and loss of MgO-Ta₂O₅ CCS thin films were plotted via 1500 micron-step measuring. The specific point of Ta₂O₅-MgO CCS thin film (post annealed at 350 °C) showing superior dielectric properties of high dielectric constant (k ∼ 28) and low dielectric loss (tan δ < 0⋅004) at 1 MHz were found in the area of 3-5 mm apart from Ta₂O₅ side on the substrate. The cation's composition of thin film was Mg:Ta = 0.4:2 at%.     

Effects of N2 and NH3 remote plasma nitridation on the structural and electrical characteristics of the HfO2 gate dielectrics

The remote plasma nitridation (RPN) of an HfO₂ film using N₂ and NH₃ has been investigated comparatively. X-ray photoelectron spectroscopy and Auger electron spectroscopy analyses after post-deposition annealing (PDA) at 700 °C show that a large amount of nitrogen is present in the bulk film as well as in the interfacial layer for the HfO₂ film nitrided with NH₃-RPN. It is also shown that the interfacial layer formed during RPN and PDA is a nitrogen-rich Hf-silicate. The C-V characteristics of an HfO_xN_y gate dielectric nitrided with NH₃-RPN have a smaller equivalent oxide thickness than that nitrided with N₂-RPN in spite of its thicker interfacial layer.     

Structural and dielectric properties of Ru-based gate/Hf-doped Ta2O5 stacks

Hf-doped Ta₂O₅ thin films are studied with respect to their composition, dielectric and electrical properties. The incorporation of Hf is performed by sputtering of a 0.7 nm thick Hf layer on top of Ta₂O₅ and subsequent annealing to stimulate diffusion of Hf into Ta₂O₅ and their intermixing. The elemental in-depth distribution of the films is investigated by the time of flight secondary ion mass spectroscopy (ToF-SIMS), which has revealed that Hf and Ta₂O₅ are intermixed throughout the whole thickness. Two sub-layers exist in all the samples - an upper homogeneous Hf-doped Ta₂O₅ sub-layer and a near interfacial region which is a mixture of Ta- and Si-oxides. The X-ray reflectivity (XRR) analysis shows existence of interfacial layer with a thickness of about 1.9-2 nm, irrespectively of the total thickness of the stacks. Metal-oxide-Si structures with Ru and RuO₂ metal electrodes have been prepared and investigated in terms of dielectric constant, effective work function (EWF) and interfacial layer parameters. The influence of post-metallization annealing steps on these parameters was also studied.     

The interface reaction of high-k La2Hf2O7/Si thin film grown by pulsed laser deposition

The La₂Hf₂O₇ films have been deposited on Si (1 0 0) substrate by using pulsed laser deposition (PLD) method. X-ray diffraction (XRD) demonstrates that the as-grown film is amorphous and crystallizes after 1000 °C annealing. The interface structure is systematically studied by Synchrotron X-ray reflectivity (XRR), Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS). Silicide, silicate and SiO_x formations from interfacial reaction are observed on the surface of the Si substrate in the as-grown film. The impact of silicide formation on the electrical properties is revealed by capacitance-voltage (C-V) measurements. By post-deposition annealing (PDA), silicide can be effectively eliminated and C-V property is obviously improved.     

Composition depth profiles of Bi3.15Nd0.85Ti3O12 thin films studied by X-ray photoelectron spectroscopy

In the present work, X-ray photoelectron spectroscopy (XPS) was used to investigate the composition depth profiles of Bi_3.15Nd_0.85Ti₃O₁₂ (BNT) ferroelectric thin film, which was prepared on Pt(1 1 1)/Ti/SiO₂/Si(1 0 0) substrates by chemical solution deposition (CSD). It is shown that there are three distinct regions formed in BNT film, which are surface layer, bulk film and interface layer. The surface of film is found to consist of one outermost Bi-rich region. High resolution spectra of the O 1s peak in the surface can be decomposed into two components of metallic oxide oxygen and surface adsorbed oxygen. The distribution of component elements is nearly uniform within the bulk film. In the bulk film, high resolution XPS spectra of O 1s, Bi 4f, Nd 3d, Ti 2p are in agreement with the element chemical states of the BNT system. The interfacial layer is formed through the interdiffusion between the BNT film and Pt electrode. In addition, the Ar⁺-ion sputtering changes lots of Bi³⁺ ions into Bi⁰ due to weak Bi-O bond and high etching energy.     

Layer structure variations of ultra-thin HfO2 films induced by post-deposition annealing

To meet challenges for a smaller transistor feature size, ultra-thin HfO₂ high-k dielectric has been used to replace SiO₂ for the gate dielectric. In order to accurately analyze the ultra-thin HfO₂ films by grazing incidence X-ray reflectivity (GIXRR), an appropriate material model with a proper layer structure is required. However, the accurate model is difficult to obtain, since the interfaces between layers of the ultra-thin HfO₂ films are not easily identified, especially when post-deposition annealing process is applied. In this paper, 3.0 nm HfO₂ films were prepared by atomic layer deposition on p-type silicon wafer, and annealed in Ar environment with temperatures up to 1000 °C. The layer structures and the role of the interfacial layer of the films in the post-deposition annealing processes were evaluated by X-ray diffraction and X-ray photoelectron spectroscopy (XPS). The experimental results and analysis showed that layer thicknesses, crystal phases and chemical structures of the ultra-thin HfO₂ films were significantly dependent on annealing temperatures. The binding energy shifts of Hf 4f, O 1s, and Si 2p elements revealed the formation of Hf silicate (Hf-O-Si bonding) with increasing annealing temperatures. Due to the silicate formation and increasing silicon oxide formation, the interface broadening is highly expected. The structure analysis of the GIXRR spectra using the modified material structure model from the XPS analysis confirmed the interfacial broadening induced by the post-deposition annealing.     

Assignment of surface IR absorption spectra observed in the oxidation reactions: 2H + H2O/Si(1 0 0) and H2O + H/Si(1 0 0)

Infrared reflection absorption spectroscopy that used buried metal layer substrates (BML-IRRAS) and density functional cluster calculations were employed to investigate the water related oxidation reactions of 2H + H₂O/Si(1 0 0)-(2 × 1), 2D + H₂O/Si(1 0 0)-(2 × 1), and H₂O + H/Si(1 0 0)-(2 × 1). In addition to the oxygen inserted coupled monohydrides, which were previously reported in the former reaction system, we report several other oxidized Si hydride species in our BML-IRRAS experiments. Three new pairs of vibrational bands are identified between 900 and 1000 cm⁻¹. These vibrational frequencies were calculated using Si9 and Si10 cluster models that included all possible structures from zero to five oxygen insertions into the top layer silicon atoms using a B3LYP gradient corrected density functional method with a polarized 6-31G** basis set for all atoms. The three pairs of vibrational modes are assigned to the scissoring modes of adjacent and isolated SiH₂ with zero, one, and two oxygen atoms inserted into the Si back bonds. All the other newly observed vibrational peaks related to Si oxidation are also assigned in this study. The Si-O stretching bands observed in the reaction 2D + H₂O/Si(1 0 0)-(2 × 1) show an isotope effect, which suggests that in the system 2H + H₂O/Si(1 0 0)-(2 × 1) also, hydrogen atom tunneling plays an important role for the insertion of oxygen atoms into Si back bonds that form oxidized adjacent dihydrides.     

Optical and electrical properties of plasma-oxidation derived HfO2 gate dielectric films

High-k gate dielectric HfO₂ thin films have been deposited on Si(1 0 0) by using plasma oxidation of sputtered metallic Hf thin films. The optical and electrical properties in relation to postdeposition annealing temperatures are investigated by spectroscopic ellipsometry (SE) and capacitance-voltage (C-V) characteristics in detail. X-ray diffraction (XRD) measurement shows that the as-deposited HfO₂ films are basically amorphous. Based on a parameterized Tauc-Lorentz dispersion mode, excellent agreement has been found between the experimental and the simulated spectra, and the optical constants of the as-deposited and annealed films related to the annealing temperature are systematically extracted. Increases in the refractive index n and extinction coefficient k, with increasing annealing temperature are observed due to the formation of more closely packed thin films and the enhancement of scattering effect in the targeted HfO₂ film. Change of the complex dielectric function and reduction of optical band gap with an increase in annealing temperature are discussed. The extracted direct band gap related to the structure varies from 5.77, 5.65, and 5.56 eV for the as-deposited and annealed thin films at 700 and 800 °C, respectively. It has been found from the C-V measurement the decrease of accumulation capacitance values upon annealing, which can be contributed to the growth of the interfacial layer with lower dielectric constant upon postannealing. The flat-band voltage shifts negatively due to positive charge generated during postannealing.     

The effect of PVA (Bi2O3-doped) interfacial layer and series resistance on electrical characteristics of Au/n-Si (110) Schottky barrier diodes (SBDs)

Two types of Schottky Barrier Diodes (SBDs) with and without PVA (Bi₂O₃-doped) polymeric interfacial layer, were fabricated and measured at room temperature in order to investigate the effects of the PVA (Bi₂O₃-doped) interfacial layer on the main electrical parameters such as the ideality factor (n), zero-bias barrier height (Φ_B0), series resistance (R_s) and interface-state density (N_ss). Electrical parameters of these two diodes were calculated from the current-voltage (I-V) characteristics and compared with each other. The values of Φ_B0, n and R_s for SBDs without polymeric interfacial layer are 0.71 eV, 1.44 and 4775 Ω, respectively. The values of Φ_B0, n and R_s for SBDs with PVA (Bi₂O₃-doped) polymeric interfacial layer are 0.74 eV, 3.49 and 10,030 Ω, respectively. For two SBDs, the energy density distribution profiles of interface states (N_ss) were obtained from forward-bias I-V measurements by taking the bias dependence of R_s of these devices into account. The values of N_ss obtained for the SBD with PVA (Bi₂O₃-doped) polymeric interfacial layer are smaller than those of the SBD without polymeric interfacial layer.     

Enhanced formation of periodic arrays of low-resistivity NiSi nanocontacts on (0 0 1)Si0.7Ge0.3 by nanosphere lithography with a thin interposing Si layer

In this study, we demonstrated significant enhancement of the formation of low-resistivity NiSi nanocontacts with controlled size on (0 0 1)Si_0.7Ge_0.3 substrates by combining the nanosphere lithography with the use of a new Ni/a-Si bilayer nanodot structure. Low-resistivity NiSi with an average size of 78 nm was observed to be the only silicide phase formed in samples annealed at 350-800 °C. The presence of the interposing Si layer with appropriate thickness was found to effectively prevent Ge segregation and maintain the interface stability in forming NiSi nanocontacts on (0 0 1)Si_0.7Ge_0.3. As the annealing temperature was increased to 900 °C, amorphous SiO_x nanowires were observed to grow from silicide nanocontact regions. The NSL technique in conjunction with a sacrificial Si interlayer process promises to be applicable in fabricating periodic arrays of other low-resistivity silicide nanocontacts on Si_1−xGe_x substrates without complex lithography.     

Photoluminescence of Si from Si nanocrystal-doped SiO2/Si multilayered sample

A multilayered Si nanocrystal-doped SiO₂/Si (or Si-nc:SiO₂/Si) sample structure is studied to acquire strong photoluminescence (PL) emission of Si via modulating excess Si concentration. The Si-nc:SiO₂ results from SiO thin film after thermal annealing. The total thickness of SiO layer remains 150 nm, and is partitioned equally into a number of sublayers (N = 3, 5, 10, or 30) by Si interlayers. For each N-layered sample, a maximal PL intensity of Si can be obtained via optimizing the thickness of Si interlayer (or d_Si). This maximal PL intensity varies with N, but the ratio of Si to O is nearly a constant. The brightest sample is found to be that of N = 10 and d_Si = 1 nm, whose PL intensity is ∼5 times that of N = 1 without additional Si doping, and ∼2.5 times that of Si-nc:SiO₂ prepared by co-evaporating of SiO and Si at the same optimized ratio of Si to O. Discussions are made based on PL, TEM, EDX and reflectance measurements.     

Thermal stability and chemical bonding states of AlOxNy/Si gate stacks revealed by synchrotron radiation photoemission spectroscopy

Annealing-temperature dependence of the thermal stability and chemical bonding states of AlO_xN_y/SiO₂/Si gate stacks grown by metalorganic chemical vapor deposition (MOCVD) using new chemistry was investigated by synchrotron radiation photoemission spectroscopy (SRPES). Results have confirmed the formation of the AlN and AlNO compounds in the as-deposited samples. Annealing the AlO_xN_y samples in N₂ ambient in 600-800 °C promotes the formation of SiO₂ component. Meanwhile, there is no formation of Al-O-Si and Al-Si binding states, suggesting no interdiffusion of Al with the Si substrate. A thermally induced reaction between Si and AlO_xN_y to form volatile SiO and Al₂O is suggested to be responsible for the full disappearance of the Al component that accompanies annealing at annealing temperature of 1000 °C. The released N due to the breakage of the Al-N bonding will react with the SiO₂ interfacial layer and lead to the formation of the Si₃-N-O/Si₂-N-O components at the top of Si substrate. These results indicate high temperature processing induced evolution of the interfacial chemistry and application range of AlO_xN_y/Si gate stacks in future CMOS devices.