The use of laser-induced breakdown spectroscopy for the determination of fluorine concentration in glass ionomer cement

The influence of He atmosphere and gate width in laser-induced breakdown spectroscopy (LIBS) determination of fluorine concentration was investigated in detail. The measurements were realized on two double pulse LIBS devices featuring different parameters. Calibration curves, describing the relationship between the fluorine concentration and the corresponding intensity of the LIBS signal, were constructed for both LIBS devices, with and without He flow, respectively. Detection limits achieved were in the range 1.18-0.47 wt.%. The best LOD value was obtained in He atmosphere. The LIBS measurement of fluorine content is influenced by different gate widths and the atmosphere in the working chamber. The proposed method was successfully applied to the determination of fluorine concentration in glass ionomer cements.     

Parametric study of a fiber-optic laser-induced breakdown spectroscopy probe for analysis of aluminum alloys

In the present work we demonstrate a fiber-optic laser-induced breakdown spectroscopy (FO LIBS) system for delivering laser energy to a sample surface to produce a spark as well as to collect the resulting radiation from the laser-induced spark. In order to improve the signal/background (S/B) ratio, various experimental parameters, such as laser energy, gate delay and width, detector gain, lenses of different focal lengths and sample surface, were tested. In order to provide high reliability and repeatability in the analysis, we also measured plasma parameters, such as electron density and plasma temperature, and determined their influence on the measurement results. The performance of FO LIBS was also compared with that of a LIBS system that does not use a fiber to transmit the laser beam. LIBS spectra with a good S/B were recorded at 2-μs gate delay and width. LIBS spectra of six different Al alloy samples were recorded to obtain calibration data. We were able to obtain linear calibration data for numerous elements (Cr, Zn, Fe, Ni, Mn, Mg and Cu). A linear calibration curve for LIBS intensity ratio vs. concentration ratio reduces the effect of physical variables (i.e. shot-to-shot power fluctuation, sample-to-surface distance, and physical properties of the samples). Our results reveal that this system may be useful in designing a high-temperature LIBS probe for measuring the elemental composition of Al melt.     

Laser induced breakdown spectroscopy of soils, rocks and ice at subzero temperatures in simulated martian conditions

We applied Laser Induced Breakdown Spectroscopy (LIBS) on moist soil/rock samples in simulated Martian conditions. The signal behavior as a function of the surface temperature in the range from + 25 °C to − 60 °C was studied at pressure of 7 mbar. We observed the strong signal oscillations below 0 °C with different negative peaks, whose position, width and magnitude depend on the surface roughness. In some cases, the signal was reduced for one order of magnitude with consequences for the LIBS analytical capability. We attribute such a signal behavior to the presence of supercooled water inside the surface pores, which freezing point depends on the pore size. On a same rock samples with different grades of the surface polishing, the signal has different temperature dependence. Its decrease was always registered close to 0 °C, corresponding to the freezing/melting of normal disordered ice, which can be present inside larger pores and scratching. An amount of the signal reduction at the phase transition temperatures does not seem to change with the laser energy density in the examined range. Comparative measurements were performed on a frozen water solution. A large depression, for two orders of magnitude, of the LIBS intensity was observed close to − 50 °C. The same negative peak, but with a smaller magnitude, was also registered on some rock/soil samples. Ablation rates and plasma parameters as a function of the sample temperature are also discussed, and their consequences for in-situ analyses.     

Comparisons between LIBS and ICP/OES

In the framework of the development of new techniques, the ability of laser-induced breakdown spectroscopy (LIBS) to analyse remotely complex aqueous solutions was investigated. The jet configuration with a collimated gas stream was chosen because it appeared to be the most promising method for the LIBS probe, particularly in terms of sensitivity and repeatability. For emission collection, the echelle spectrometer offers a simultaneously recorded wavelength range from the UV to the near IR and is interesting for multielemental analysis for LIBS and also for inductively coupled plasma (ICP) optical emission spectroscopy (OES). The importance of parameters influencing the quantitative results of LIBS such as multispecies analysis, sheath gas, use of an internal standard and temporal parameters for analysis is described. LIBS quantitative data have been directly compared with results from the more standard ICP/OES technique.     

Design,construction and assessment of a field-deployable laser-induced breakdown spectrometer for remote elemental sensing

A field-deployable laser-induced breakdown spectrometer for measurements in the hundreds of meters range has been presented. The system is capable of elemental analysis with no previous preparation and in near real time, with the only requirement of a free line-of-sight between the instrument and the sample. Main factors influencing LIBS performance at stand-off distances are outlined. LIBS signal is shown to depend on range of analysis, peak power, beam quality, laser wavelength and optics dimensions. A careful control of focusing conditions has been shown to be of importance to avoid interferences from air breakdown by the stand-off focused beam.     

Evaluation of grinding methods for pellets preparation aiming at the analysis of plant materials by laser induced breakdown spectrometry

It has been demonstrated that laser induced breakdown spectrometry (LIBS) can be used as an alternative method for the determination of macro (P, K, Ca, Mg) and micronutrients (B, Fe, Cu, Mn, Zn) in pellets of plant materials. However, information is required regarding the sample preparation for plant analysis by LIBS. In this work, methods involving cryogenic grinding and planetary ball milling were evaluated for leaves comminution before pellets preparation. The particle sizes were associated to chemical sample properties such as fiber and cellulose contents, as well as to pellets porosity and density. The pellets were ablated at 30 different sites by applying 25 laser pulses per site (Nd:YAG@1064 nm, 5 ns, 10 Hz, 25 J cm⁻²). The plasma emission collected by lenses was directed through an optical fiber towards a high resolution echelle spectrometer equipped with an ICCD. Delay time and integration time gate were fixed at 2.0 and 4.5 μs, respectively. Experiments carried out with pellets of sugarcane, orange tree and soy leaves showed a significant effect of the plant species for choosing the most appropriate grinding conditions. By using ball milling with agate materials, 20 min grinding for orange tree and soy, and 60 min for sugarcane leaves led to particle size distributions generally lower than 75 μm. Cryogenic grinding yielded similar particle size distributions after 10 min for orange tree, 20 min for soy and 30 min for sugarcane leaves. There was up to 50% emission signal enhancement on LIBS measurements for most elements by improving particle size distribution and consequently the pellet porosity.     

Rapid in-situ analysis of liquid steel by laser-induced breakdown spectroscopy

Laser-induced breakdown spectroscopy (LIBS) denotes a technique where a pulsed laser beam is used to ablate small amounts of the target material. The characteristic optical emission line intensities of the excited species in the laser-generated plasma allow a quantitative chemical analysis of the target material. LIBS is a fast, non-contact method allowing large working distances between the sample under investigation and the detection system. These properties make LIBS applicable to process control in metallurgy. We describe an apparatus designed for rapid in-situ analysis of solid and molten metals at variable distances of up to 1.5 m. A variable lens system allows compensation for varying positions of the liquid steel surface. The LIBS signal is guided by a fiber optic bundle of 12-m length to the spectrometer. Analysis of an element's concentration takes 7 s. Laboratory experiments using an induction furnace showed that the addition of admixtures to liquid steel results in rapid response of the system. Results including the in-situ monitoring of Cr, Cu, Mn and Ni within certain concentration ranges are presented (Cr: 0.11–13.8 wt.%; Cu: 0.044–0.54 wt.%; Mn: 1.38–2.5 wt.%; Ni: 0.049–5.92 wt.%).     

微波诱导等离子体离子迁移谱仪性能及影响因素的研究

离子迁移谱仪的性能受到多种因素的影响,如漂移管电场强度离子门脉冲宽度、离子源工作条件、漂移管尺寸、离子门加工工艺和屏蔽网透过率等。在实际应用中需要对漂移管电场强度和离子门脉冲宽度进行调整以平衡灵敏度和分辨率。本研究详细研究了漂移管电场强度和离子门脉冲宽度对微波诱导等离子体离子迁移谱( MIPI-IMS)分辨率和灵敏度的影响。实验结果表明,存在一个最佳电场强度值使得分辨率达到最大,而且不同离子门脉冲宽度对应的最佳电场强度值不同;增大电场强度和离子门脉冲宽度有利于灵敏度的提升。与其它离子流较弱的离子源相比,离子流较大的微波诱导等离子体离子源在实际应用中对离子门脉冲宽度和漂移管电场强度有更多的选择。此研究结果有助于MIPI-IMS仪器性能的提升。将异丙醇用于测试MIPI-IMS的性能,结果表明,MIPI-IMS在保持较低检出限(7.7×10-11, V/V)的同时,分辨率可以达到66。     

Detection of zinc and lead in water using evaporative preconcentration and single-particle laser-induced breakdown spectroscopy

A novel laser-induced breakdown spectroscopy (LIBS)-based measurement method for metals in water is demonstrated. In the presented technology a small amount of sodium chloride is dissolved in the sample solution before spraying the sample into a tubular oven. After water removal monodisperse dry NaCl aerosol particles are formed where trace metals are present as additives. A single-particle LIBS analysis is then triggered with a scattering based particle detection system. Benefits are the highly increased metal concentration in the LIBS focal volume and the static NaCl-matrix which can be exploited in the signal processing procedure. Emitted light from the emerged plasma plume is collected with wide angle optics and dispersed with a grating spectrometer. In an aqueous solution, the respective limits of detection for zinc and lead were 0.3 ppm and 0.1 ppm using a relatively low 14 mJ laser pulse energy. Zn/Na peak intensity ratio calibration curve for zinc concentration was also determined and LIBS signal dependence on laser pulse energy was investigated.     

Fast quantitative determination of platinum in liquid samples by laser-induced breakdown spectroscopy

The potential of laser-induced breakdown spectroscopy (LIBS) for the rapid determination of platinum in liquid silicone oils has been evaluated in the framework of on-line process control. A comparison of LIBS sensitivity between three setups designed for liquid analysis (static, liquid jet and flowing liquid) was performed using a 266 nm Nd/YAG laser irradiation. Best results were obtained using the flowing liquid setup and a similar limit of detection was obtained using the liquid jet. The effect of different buffer gases (Ar, He, N(2), etc.) on the signal sensitivity was studied in liquid jet analysis and best values were obtained with a nitrogen sheath gas. Detection limits were in the 100 mg/kg range for both setups. Quantitative determination of platinum in real liquid samples was also investigated using both liquid jet and flowing liquid setups. Calibration curves were plotted for Pt with the liquid jet and the flowing liquid setups under optimised temporal acquisition parameters (delay time and gate width). A normalisation using a silicon line was applied and recovery ranged from 3 to 15% for Pt in catalyst samples with both setups showing that LIBS is a sensitive and accurate method for on-line applications.     

Double pulse laser-induced breakdown spectroscopy of explosives: Initial study towards improved discrimination

Detecting trace explosive residues at standoff distances in real-time is a difficult problem. One method ideally suited for real-time standoff detection is laser-induced breakdown spectroscopy (LIBS). However, atmospheric oxygen and nitrogen contributes to the LIBS signal from the oxygen- and nitrogen-containing explosive compounds, complicating the discrimination of explosives from other organic materials. While bathing the sample in an inert gas will remove atmospheric oxygen and nitrogen interference, it cannot practically be applied for standoff LIBS. Alternatively, we have investigated the potential of double pulse LIBS to improve the discrimination of explosives by diminishing the contribution of atmospheric oxygen and nitrogen to the LIBS signal. These initial studies compare the close-contact (< 1 m) LIBS spectra of explosives using single pulse LIBS in argon with double pulse LIBS in atmosphere. We have demonstrated improved discrimination of an explosive and an organic interferent using double pulse LIBS to reduce the air entrained in the analytical plasma.     

Preliminary studies of laser-induced breakdown spectrometry for the determination of Ba,Cd, Cr and Pb in toys

The performance of laser-induced breakdown spectrometry (LIBS) for the determination of Ba, Cd, Cr and Pb in toys has been evaluated by using a Nd:YAG laser operating at 1064 nm and an Echelle spectrometer with intensified charge-coupled device detector. Samples were purchased in different cities of São Paulo State market and analyzed directly without sample preparation. Laser-induced breakdown spectrometry experimental conditions (number of pulses, delay time, integration time gate and pulse energy) were optimized by using a Doehlert design. Laser-induced breakdown spectrometry signals correlated reasonably well with inductively coupled plasma optical emission spectrometry (ICP OES) concentrations after microwave-assisted acid digestion of selected samples. Thermal analysis was used for polymer identification and scanning electron microscopy to visualize differences in crater geometry of different polymers employed for toy fabrication. Results indicate that laser-induced breakdown spectrometry can be proposed as a rapid screening method for investigation of potentially toxic elements in toys. The unique application of laser-induced breakdown spectrometry for identification of contaminants in successive layers of ink and polymer is also demonstrated.     

Use of the vacuum ultraviolet spectral region for laser-induced breakdown spectroscopy-based Martian geology and exploration

Several elements important to planetary geology (e.g. Br, C, Cl, P, S) and the human exploration of Mars (e.g. toxic elements such as As) have strong emission lines in the purge and vacuum ultraviolet (VUV) spectral region (100–200 nm). This spectral region has not been extensively studied for space applications using geological samples. We studied emissions from the laser-induced breakdown spectroscopy (LIBS) plasma in this region using a sample chamber filled with 7 torr (930 Pa) of CO₂ to simulate the Martian atmosphere. Pressures down to 0.02 torr were also used to evaluate the effect of the residual CO₂ on the spectra and to begin investigating the use of VUV-LIBS for airless bodies such as asteroids and the Moon. Spectra were recorded using a 0.3-m vacuum spectrometer with an intensified CCD (ICCD) camera. The effects of time delay and laser energy on LIBS detection at reduced pressure were examined. The effect of ambient CO₂ on the detection of C in soil was also evaluated. Lines useful for the spectrochemical analysis of As, Br, C, Cl, P, and S were determined and calibration curves were prepared for these elements. Although LIBS is being developed for stand-off analysis at many meters distance, the experiments reported here were aimed at in-situ (close-up) analysis.     

Combined Raman spectrometer/laser-induced breakdown spectrometer for the next ESA mission to Mars

Among the different instruments that have been pre-selected to be on-board the Pasteur payload on ExoMars is the Raman/laser induced breakdown spectroscopy (LIBS) instrument. Raman spectroscopy and LIBS will be integrated into a single instrument sharing many hardware commonalities. An international team under the lead of TNO has been gathered to produce a design concept for a combined Raman spectrometer/LIBS elegant bread-board (EBB). The instrument is based on a specially designed, extremely compact, spectrometer with high resolution over a large wavelength range, suitable for both Raman spectroscopy and LIBS measurements. Low mass, size and power consumption are the main drivers of the instrument's design concept. In this paper, science objectives for the combined instrument are detailed. Background information on Raman spectroscopy and LIBS are presented, focussing on the synergy of these two techniques. In the last section, the instrument concept resulting from the assessment of the feasibility of the combined Raman/LIBS EBB is presented.     

Laser-Induced Breakdown Spectroscopy for Mars surface analysis: capabilities at stand-off distances and detection of chlorine and sulfur elements

An international consortium is studying the feasibility of performing in situ geochemical analysis of Mars soils and rocks at stand-off distances up to several meters using the Laser-Induced Breakdown Spectroscopy (LIBS) technique. Stand-off analysis for Martian exploration imposes particular requirements on instrumentation, and it is necessary to first test the performance of such a system in the laboratory. In this paper, we test the capabilities of two different experimental setups. The first one is dedicated to the qualitative analysis of metals and rocks at distances between 3 and 12 m. With the second one, we have obtained quantitative results for aluminum alloys and developed a spectral database under Martian conditions for sulfur and chlorine, two elements that are geologically interesting but generally difficult to detect by LIBS under standard conditions (atmospheric pressure, close distance). These studies were carried out to determine an optimal instrumental design for in situ Mars analysis. The quality of analytical results affected by the optical elements and spectrometer has been particularly highlighted.     

Analytical optimization of some parameters of a Laser-Induced Breakdown Spectroscopy experiment

Laser-Induced Breakdown Spectroscopy (LIBS) experiments are performed on standard metallic samples, in air at atmospheric pressure, using a Nd:YAG laser at 1064 nm and a fiber located close to the plasma to collect its emission. This configuration is chosen because it is representative of many LIBS setups. The influence of several experimental parameters is studied in order to optimize the analytical performances: signal-to-background ratio (SBR), line intensity and repeatability. Temporal parameters of the detector are adjusted for each measurement to maximize the SBR. The signal is found to linearly depend on the pulse energy over our range of investigation. This behavior is related to the increase of the number of vaporized atoms when the pulse energy increases. Complementary measurements of plasma dimensions support our conclusions. We show the existence of an optimum fluence on the sample that gives the highest signal and the lowest relative standard deviation (RSD), and which does not depend on the pulse energy. Finally we demonstrate that ablation is much more efficient using a laser beam with a high numerical aperture, other experimental parameters being unchanged, because of a less pronounced laser shielding by the plasma. Analytical consequences of this result are discussed.     

Local equivalence ratio measurements in turbulent partially premixed flames using laser-induced breakdown spectroscopy

One of the most recently applied laser-based techniques in combustion environment is the laser-induced breakdown spectroscopy (LIBS). The technique has been extensively and successfully applied to elemental concentration measurements in solids and liquids. The LIBS signal is much weaker in gases and hence more work is required for quantitative measurements in flames. In the present work we used two orthogonal Nd:YAG lasers that operate at the fundamental wavelength with laser pulse energy of about 100 mJ/pulse. A Princeton-Instruments IMAX ICCD camera attached to a PI-Echelle spectrometer was used for signal detection. The lasers are focused using two 5-cm lenses. Several calibration points have been collected in well defined and homogeneous mixtures of air and fuel in order to be used as references for the measurements in turbulent partially premixed flames. This work shows that the application of the LIBS technique in a turbulent combustion environment is feasible and signal is enhanced by applying an orthogonal dual-pulse arrangement for air–fuel.     

Comparison of detection limits, for two metallic matrices, of laser-induced breakdown spectroscopy in the single and double-pulse configurations

Limits of detection have been studied for several elements in aluminium and steel alloys, at atmospheric pressure in air, by use of the single and collinear double-pulse configurations of laser-induced breakdown spectroscopy. For this purpose, calibration plots were constructed for Mg, Al, Si, Ti, Cr, Mn, Fe, Ni, and Cu using a set of certified aluminium alloy samples and a set of certified steel samples. The investigation included optimization of the experimental conditions to furnish the best signal-to-noise ratio. Inter-pulse delay, gate width, and acquisition delay were studied. The detection limits for the elements of interest were calculated under the optimum conditions for the double-pulse configuration and compared with those obtained under the optimum conditions for single-pulse configuration. Significantly improved detection limits were achieved, for all the elements investigated, and in both aluminium and steel, by use of the double-pulse configuration. The experimental findings are discussed in terms of the measured plasma conditions (particle and electron density, and temperature).     

Calibration Measurements in laser-induced breakdown spectroscopy using nanosecond and picosecond lasers

The influence of laser pulse duration on laser-induced breakdown spectroscopy (LIBS) calibration curves is investigated in the present work. Two Nd:YAG lasers providing pulses of 35 ps and 5 ns, respectively, both operating at 1064 nm, have been used to create plasmas on aluminium, manganese, iron, and silicon targets and on prepared stoichiometric samples of these metals in a matrix. The time-resolved, space-averaged plasma temperatures have been deduced using Boltzmann plots, while the electron number density has been determined from the broadening of spectral lines. The effect of laser pulse duration on the plasma characteristics is discussed, and comparisons are made with previously reported data measured under similar experimental conditions. The optimum experimental conditions (i.e., time delay, gate width, laser energy) have been determined for reliable use of LIBS for quantitative analysis for both pulse durations. For each of the metals of interest, calibration curves have been constructed for concentrations ranging up to 2%.     

Quantitative analysis of oxide materials by laser-induced breakdown spectroscopy with argon as an internal standard

Laser-induced breakdown spectroscopy (LIBS) is demonstrated as a quantitative technique for geochemical analysis. This study demonstrates the applicability of LIBS to multielemental analysis of minerals using argon as an internal standard. Laser-induced breakdown spectroscopy has been applied to measure elements in oxide form. In the present study, the contents of several oxides, such as Fe₂O₃, CaO and MgO, in geological samples from the Tierga Mine (Zaragoza, Spain) were analyzed by LIBS. An argon environment was used to eliminate interference from air at atmospheric pressure. Furthermore, argon was used as an internal standard. The result was enhanced signal and enhanced linearity of the calibration curves. The Fe₂O₃, CaO and MgO concentrations determined by LIBS were compared with the results obtained using another analytical technique, inductively coupled plasma optical emission spectrometry (ICP-OES). The concentrations found using LIBS were in good agreement with the values obtained by ICP-OES.