The Pressurized Hollow Cylinder or Disk Problem for Functionally Graded Isotropic Linearly Elastic Materials

The purpose of this research is to investigate the effects of material inhomogeneity on the response of linearly elastic isotropic hollow circular cylinders or disks under uniform internal or external pressure. The work is motivated by the recent research activity on functionally graded materials (FGMs), i.e., materials with spatially varying properties tailored to satisfy particular engineering applications. The analog of the classic Lamé problem for a pressurized homogeneous isotropic hollow circular cylinder or disk is considered. The special case of a body with Young"s modulus depending on the radial coordinate only, and with constant Poisson"s ratio, is examined. It is shown that the stress response of the inhomogeneous cylinder (or disk) is significantly different from that of the homogeneous body. For example, the maximum hoop stress does not, in general, occur on the inner surface in contrast with the situation for the homogeneous material. The results are illustrated using a specific radially inhomogeneous material model for which explicit exact solutions are obtained. This revised version was published online in August 2006 with corrections to the Cover Date.     

Solving the Stress Problem for Hollow Cylinders with Corrugated Elliptical Cross Section

The paper presents an approach based on three-dimensional elastic equations to solve boundary-value stress problems for hollow cylinders with corrugated elliptical cross section. Discrete Fourier series are used to make the problem one-dimensional and then to solve it by the stable discrete orthogonalization method. Solutions for cylinders of different thicknesses are presented     

Dynamics of Linear Piezoelectric Rods

A one-dimensional model of a linear piezoelectric thin rod is deduced from three-dimensional piezoelectricity by introducing suitable internal constraints and appropriate hypotheses on the electric displacement field.     

特征值为二重根的压电材料异材界面端奇异性

横观各向同性压电材料的特征值的不同,其一般解的形式也不同,压电结合材料问题的求解,可以归结为寻找合适的调和函数,针对材料特征值为二重根（s1^2≠s2^2=s3^2)的情况,将变量分离形式的调和函数作特征展开,推导了横观各向同性压电材料轴对称异材界面端附近的奇民异应力场和奇异电位移场,给出院 决定奇异性的特性方程,结果表明,电位移场和应力场具有相同的奇异性,奇异性次数不仅与界面端形状以及材料的机械性质有关。也与材料的压电特性有关。     

功能梯度压电材料圆环位移和电势边值问题的精确解

圆环形的压电材料器件在智能结构中得到了广泛的应用。本文推导了横观各向同性功能梯度压电材料圆环在内、外边界上给定位移和电势情况下的一般解。极化方向在圆环的半径方向,材料常数的梯度方向也设定在半径方向,并可表示为半径r的幂,本构关系为线性。然后推导了压电圆环外壁固定、接地,内壁沿垂向有一微小位移、电势分别为余弦分布和均匀分布的问题的精确解,并计算了该问题在这两种电势情况下产生的无量纲形式的径向和环向位移、电势、应力及电位移沿径向分布的数值结果。计算中考虑了不同的材料梯度,以及内壁的位移与电势的不同比例。     

The Stress Response of Functionally Graded Isotropic Linearly Elastic Rotating Disks

The purpose of this research is to investigate the effects of material inhomogeneity on the response of linearly elastic isotropic solid circular disks or cylinders, rotating at constant angular velocity about a central axis. The work is motivated by the recent research activity on functionally graded materials (FGMs), i.e., materials with spatially varying properties tailored to satisfy particular engineering applications. The analog of the classic problem for a homogeneous isotropic rotating solid disk or cylinder is considered. The special case of a body with Young"s modulus depending on the radial coordinate only, and with constant Poisson"s ratio, is examined. For the case when the Young"s modulus has a power-law dependence on the radial coordinate, explicit exact solutions are obtained. It is shown that the stress response of the inhomogeneous disk (or cylinder) is significantly different from that of the homogeneous body. For example, the maximum radial and hoop stresses do not, in general, occur at the center as in the case for the homogeneous material. Furthermore, for the case where the Young"s modulus increases with radial distance from the center, it is shown that radially symmetric solutions exist provided the rate of growth of the Young"s modulus is, at most, cubic in the radial variable. It is also shown for the general inhomogeneous isotropic case how the material inhomogeneity may be tailored so that the radial and hoop stress are identical throughout the disk. This revised version was published online in August 2006 with corrections to the Cover Date.     

功能梯度压电带中裂纹对SH波的散射

研究功能梯度压电带中裂纹对SH波的散射问题,为了便于分析,材料性质假定为指数模型,并假设裂纹面上的边界条件为电渗透型的.根据压电理论得到压电体的状态方程,利用Fourier积分变换,问题转化为对偶积分方程的求解.用Copson方法求解积分方程.求得了裂纹尖端动应力强度因子、电位移强度因子的解析表达式,最后数值结果显示了标准动应力强度因子与入射波数、材料参数、带宽、波数以及入射角之间的关系.     

功能梯度压电/压磁双材料的周期界面裂纹问题

研究反平面载荷作用下压电/压磁双材料的周期界面裂纹问题,压电/压磁双材料由有限厚度的功能梯度压电层和功能梯度压磁层粘结而成.为便于分析,假设压电层和压磁层的材料性质沿着裂纹的法线方向呈指数变化,基于分离变量和Hilbert核奇异积分方程方法,获得应力强度因子的数值解.数值算例讨论层厚、周期带长度、梯度参数以及材料参数变动等对应力强度因子的影响.结果发现层厚以及裂纹间距的增大会降低裂纹尖端应力强度因子,梯度参数的改变对应力强度因子也有显著的影响.材料参数变动的讨论发现弹性参数的变动对应力强度因子影响最大,其次为电参数,磁参数的变动对应力强度因子影响最小.