毛细管电泳流动注射-负压进样装置的研究

设计了一种用于毛细管电泳系统的流动注射-负压进样装置。样品由蠕动泵输送到进样阀后再由缓冲液带到分离毛细管入口,由毛细管出口端施加的负压引入。进样时间由自制精密控时电路控制,经进样条件的优化,能获得良好的重现性。实验中两种阳离子峰面积和迁移时间的RSD(n=8)≤2.7%,优于传统重力进样,而且操作简便;与非接触电导检测器组装成流动注射-毛细管电泳系统,可实现快速、高效的在线分析。初步应用于无机阳离子的分离,取得了满意的结果。     

A separation carrier in high-speed proteome analysis by capillary electrophoresis.

We obtained a high-efficiency separation carrier for proteome analysis by capillary electrophoresis. The addition of curdlan or laminaran to the run buffer hastened the migration time without any degradation in resolution. We propose that for the development of the separation carrier it is necessary to synthetically analyze each of the following mobility factors of electroosmotic flow: buffer ionic strength, additional disturbance and adsorption. The total analysis for buffer and additive will be useful for designing high-throughput screening (HTS) systems for proteome analysis without annoying adsorption.     

Unsteady transport phenomena in free-flow electrophoresis--prerequisite of ultrafast sample cleaning in microfluidic devices

The evolution partial differential equations describing the transport processes induced by hydrodynamic flow in free-flow electrophoresis (FFE) are solved by the generalized dispersion theory. Our theoretical analysis demonstrates that the central injection of solutes into a relatively fast hydrodynamic flow enables to transport them to the channel outlet well before they are spread through the width of the channel and their migration is negatively affected by a contact with walls. In this case, the axial zone spreading decreases by increasing the linear velocity of hydrodynamic flow. The resulting dependencies of convective and dispersion coefficients on the velocity of flow and parameters of the separation channel show the optimum separation conditions with respect to resolution and analysis time. Due to the unsteady character of transport processes, effective FFE separations can potentially be performed in a microfluidic device in seconds. This is a reasonable time to separate low-molecular mass impurities in the electric field. Thus, a fast and efficient sample cleaning before subsequent analysis by electrospray ionization-mass spectrometry (ESI-MS) or another separation method can be performed.     

Direct chiral resolution of lactic acid in food products by capillary electrophoresis

Chiral resolution of native DL-lactic acid was performed by capillary electrophoresis using 2-hydroxypropyl-beta-cyclodextrin as a chiral selector. Various factors affecting chiral resolution, migration time, and peak area of lactic acid were studied. The running conditions for optimum separation of lactic acid were found to be 90 mM phosphate buffer (pH 6.0) containing 240 mM 2-hydroxypropyl-beta-cyclodextrin with an effective voltage of -30 kV at 16 degrees C, using direct detection at 200 nm. In order to enhance the sensitivity, sample injection was done under a pressure of 50 mbar for 200 s. On-line sample concentration was accomplished by sample stacking. With this system, D- and L-lactic acids in food products were analyzed successfully.     

Chemometric approach to the treatment of benzodiazepine separation and peak broadening in capillary electrophoresis.

A chemometric methodology was used to study capillary efficiency and the separation of ten benzodiazepines in capillary electrophoresis. The resolution between two adjacent peaks on the electropherogram was estimated and the overall quality of the separation was assessed by means of a new response function. The nature (methanol or acetonitrile) and proportion of the organic modifier both in the background electrolyte and the sample buffer and the injection time were considered. The results predicted that if the sample had a lower dielectric constant than the background electrolyte buffer then a much larger injection volume could be used. The computer optimization routine was experimentally validated and the result demonstrated that the fastest electrophoretic reparation was obtained with acetonitrile (7 min instead of 9 min with methanol).     

Determination of creatinine in human serum by short-end injection capillary zone electrophoresis

A new ultra-rapid free-solution capillary zone electrophoresis method to measure serum creatinine is presented. Procedural parameters such as injection mode, concentration and pH of phosphate running buffer and acidic deproteinization of serum samples were investigated. Short-end injection permits a decrease of the analysis time by injecting samples at the outlet end of a silica capillary closest to the detection window, so reducing the migration distance. Thus, when a capillary with an effective length of 10.2 cm and a 40 mmol/L sodium phosphate buffer pH 2.35 was used, the obtained migration time of the creatinine peak was the shortest never described before, about 1.1 min. These conditions give a good reproducibility of the migration times (coefficient of variation, CV% < 0.5) and the peak areas (CV% < 2.8). Intra- and interassay CV were 3.06 and 6.26%, respectively, and analytical recovery was 99.4%. We compared our proposed method to Jaffé colorimetric assay, by measuring serum creatinine in 128 normal subjects. The obtained data were analyzed by the Passing and Bablok regression and Bland-Altman test. Creatinine concentration in healthy subjects was also used to investigate on its relationships with plasma thiols levels.     

Simultaneous determination of deoxycytidine diphosphate and deoxycytidine triphosphate by capillary electrophoresis with transient isotachophoretic stacking: a sensitive monitoring method for ribonucleotide reductase activity

A simple and rapid capillary electrophoretic method was developed for simultaneous determination of sub‐micromolar 2′‐deoxycytidine 5′‐diphosphate (dCDP) and 2′‐deoxycytidine 5′‐triphosphate (dCTP) levels in enzyme assays without using radioactively labeled substrates. The separation was performed at 25°C using MES in the BGE as the terminating ion, the chloride ions in the sample buffer as the leading ion, and PEG 4000 in the BGE as the EOF suppressor for sample stacking by transient isotachophoresis (tITP). Several parameters affecting the separation were investigated, including the pH of the BGE, the concentration of sodium chloride in the sample buffer, and the concentrations of MES and PEG 4000 in the running buffer. Good separation with high separation efficiency was achieved within 6 min under optimal conditions. In comparison with the simple CZE method, the present tITP‐CZE method enabled a 150‐fold increase in the injection time without any decrease in resolution and the sensitivity was enhanced up to two orders of magnitude with the new method. The linear range of the method was 0.1–10 μM for dCDP and dCTP. The limits of detection of dCDP and dCTP were 85 and 73 nM, respectively. The proposed method was successfully applied for the activity assay of ribonucleotide reductase from Hep G2 and Sf9 cells.     

Intracellular adenosine 5'-triphosphate, adenosine 5'-diphosphate, and adenosine 5'-monophosphate detection by short-end injection capillary electrophoresis using methylcellulose as the effective electroosmostic flow suppressor

We present a new rapid CE method to measure adenine nucleotides adenosine 5'-triphosphate (ATP), adenosine 5'-diphosphate (ADP), and adenosine 5'-monophosphate (AMP) in cells. The short-end injection mode allows a decrease in the analysis time by injecting samples at the outlet end of a silica capillary closest to the detection window, reducing the migration distance. Moreover, the use of methylcellulose (MC) as run buffer additive to suppress EOF permits to further reduce the migration times of analytes. Thus, when a capillary with an effective length of 10.2 cm was used with a 60 mmol/L sodium acetate buffer pH 3.80 in the presence of 0.01% of MC, the migration time of analytes were 1.35 min for ATP, 1.85 min for ADP, and 4.64 min for AMP. These conditions gave a good reproducibility for intra- and interassay (CV <4 and 8%, respectively) and all the procedure demonstrated an excellent analytical recovery (from 98.3 to 99 %). The method suitability was proved both on red blood cells and in spermatozoa. We compared our proposed method to a spectrophotometric assay, by measuring ATP levels in 40 spermatozoa samples. The obtained data were analyzed by the Passing and Bablok regression and Bland-Altman test.     

Effects of sample matrix and injection plug on dsDNA migration in capillary gel electrophoresis

Reproducible DNA migration times are required for accurate basepair assignment in restriction fragment mapping and polymerase chain reaction product identification. Our data shows DNA migration time shifts with changes in sample ionic strength. Secondly, loss of resolution with replaceable polyacrylamide gels was observed when increasing the length of the sample plug with pressure injection. An easy way to correct for the migration time shifts is to incorporate an internal DNA standard directly into the separation process by consecutively injecting the DNA sample and the DNA standard. This allows for compensation of any possible migration time variation caused by high ionic strength sample matrices. Also high-resolution separations can be maintained with large injection volumes (long injection plug) by using consecutive injections of 0.1 M Tris-acetate buffer and the DNA sample.     

Sodium glycylglycine as effective electrolyte run buffer for ascorbic and uric acid separation by CZE: a comparison with two other CE assays

A new CE method for ascorbic acid (AA) and uric acid (UA) detection in human plasma has been developed. Analytes were resolved in less than 4 min by employing sodium glycylglycine (Glygly) as electrolyte run buffer at pH 8.0. Using the diode array detector ability to measure multiple wavelengths simultaneously, detection was optimized by monitoring the run at 262 nm for AA and at 288 nm for UA. Electrophoretic parameters such as resolution, migration times, efficiency, and peak areas of this new method were compared to those obtained by the two CE assays described in literature, in which the analytes separation was achieved by using sodium borate (that allows faster migration times but poor resolution) or tricine (with the highest resolution but elevated migration times) as electrolyte run buffer. Sodium Glygly allows to obtain the same good resolution given by the tricine buffer but with the faster analysis times of the sodium borate run buffer. Ascorbate and urate levels were measured in 35 healthy volunteers by the three methods and the obtained data were compared by three different statistical tests (mountain plot, Passing-Bablok regression, and Bland-Altman test) in order to verify the accuracy of our proposed method.     

Application of capillary zone electrophoresis to the screening of some angiotensin II receptor antagonists

A capillary zone electrophoretic (CZE) method was optimized for the separation of five angiotensin II receptor antagonists (Losartan, Irbesartan, Valsartan, Telmisartan and Eprosartan) and two of their metabolites (EXP 3174 and Candesartan M1) by means of experimental design methodologies. The aim of this study was to define rapidly experimental conditions under which the analytes can be resolved for quantitation. The effects of the buffer (pH, concentration and composition), the organic modifier and voltage were studied. Critical factors were identified in a screening design (fractional factorial design) and sequentially an optimization design (central composite design) was used to choose optimal conditions for separation. The most favorable electrophoretic conditions were found by setting the resolution at a threshold value (Rs < or = 1.5) and minimizing, if possible, analysis time. Successful results were obtained with a 50 mM potassium dihydrogen phosphate:boric acid (25:75 v/v) buffer at pH 5.5 in the presence of 5% methanol and application of a 25 kV voltage. Analysis time was 8 min in a conventional fused-silica capillary (50 cm effective length) in a normal cationic mode (anode at the inlet and cathode at the outlet) after hydrostatical sample injection for 30 s.     

Separation of cold medicine ingredients by capillary electrophoresis

This study demonstrates the separation of cold medicine ingredients (e.g., phenylpropanolamine, dextromethorphan, chlorpheniramine maleate, and paracetamol) by capillary zone electrophoresis and micellar electrokinetic chromatography. Factors affecting their separations were the buffer pH and the concentrations of buffer, surfactant and organic modifiers. Optimum results were obtained with a 10 mM sodium dihydrogen-phosphate-sodium tetraborate buffer containing 50 mM sodium dodecyl sulfate (SDS) and 5% methanol (MeOH), pH 9.0. The carrier electrolyte gave a baseline separation of phenylpropanolamine, dextromethorphan, chlorpheniramine maleate, and paracetamol with a resolution of 1.2, and the total migration time was 11.38 min.     

Multivariate evaluation of the separation performance in micellar electrokinetic capillary chromatography of peptides: Optimization

Summary A simultaneous optimization of resolution, efficiency and migration times of enkephalin-related peptides in micellar electrokinetic capillary chromatography (MEKC) was performed. Six experimental variables; the surfactant concentration, the percentage of organic modifier, the ionic strength of the buffer, the injected plug length, the applied temperature and the sample solution composition were studied via central composite design (CCD). Large differences in separation performance were observed at a commonly used level of organic modifier in the background electrolyte. Partial least squares regression of the responses revealed that the experimental domain was too large and complicated to be explained by the model. A new CCD model was obtained with improved prediction ability at narrower ranges of the experimental factors, especially of the organic modifier. A conflict between maximum resolution and efficiency within the shortest analysis time was observed. Therefore, constraints were set on maximal resolution and analysis time, while solving for maximum efficiency. Optimal operating conditions were found at 35 mM sodium dodecyl sulfate (SDS), 5% v/v of acetonitrile, 1.9 mm injected plug length, 35°C and sample solution with no added micelles, giving high efficiency and resolution at short analysis time. The value predicted by the model was found to agree very well to the observed values, at the optimal experimental conditions, even on a new capillary.     

A highly sensitive CE-UV method with dynamic coating of silica-fused capillaries for monitoring of nucleotide pyrophosphatase/phosphodiesterase reactions

A new highly sensitive capillary electrophoresis (CE) method applying dynamic coating and on-line stacking for the monitoring of nucleotide pyrophosphatases/phosphodiesterases (NPPs) and the screening of inhibitors was developed. NPP1 and NPP3 are membrane glycoproteins that catalyze the hydrolysis nucleotides, e.g. convert adenosine 5'-triphosphate to adenosine 5'-monophosphate (AMP) and pyrophosphate. Enzymatic reactions were performed and directly subjected to CE analysis. Since the enzymatic activity was low, standard methods were insufficient. The detection of nanomolar AMP and other nucleotides could be achieved by field-enhanced sample injection and the addition of polybrene to the running buffer. The polycationic polymer caused a dynamic coating of the silica-fused capillary, resulting in a reversed electroosmotic flow. The nucleotides migrated in the direction of the electroosmotic flow, whereas the positively charged polybrene molecules moved in the opposite direction, resulting in a narrow sample zone over a long injection time. Using this on-line sensitivity enhancement technique, a more than 70-fold enrichment was achieved for AMP (limit of detection, 46 nM) along with a short migration time (5 min) without compromising separation efficiency and peak shape. The optimized CE conditions were as follows: fused-silica capillary (30 cm effective lengthx75 mum), electrokinetic injection for 60 s, 50 mM phosphate buffer pH 6.5, 0.002% polybrene, constant current of -60 muA, UV detection at 210 nm, uridine 5'-monophosphate as the internal standard. The new method was used to study enzyme kinetics and inhibitors. It opens an easy way to determine the activities of slowly metabolizing enzymes such as NPPs, which are of considerable interest as novel drug targets.     

Determination of baicalein, baicalin and quercetin in Scutellariae Radix and its preparations by capillary electrophoresis with electrochemical detection

A method based on capillary electrophoresis with electrochemical detection (CE-ED) was developed for the determination of baicalein, baicalin and quercetin in Scutellariae Radix and its pharmaceutical preparations. The effects of some important factors such as the acidity and concentration of running buffer, separation voltage, injection time, and the potential of working electrode were investigated to acquire the optimum condition. The working electrode was a 300-mum diameter carbon disc electrode positioned opposite the outlet of capillary. The three analytes could be well separated within 12 min in a 40 cm length capillary at the separation voltage of 12 kV in a 100 mmol l(-1) borate buffer (pH 9.0). The response was linear over three orders of magnitude with detection limits (S/N=3) ranged from 0.224 to 0.548 mumol l(-1) for all three analytes. This proposed method demonstrated good long-term stability and reproducibility with R.S.D. of less than 5% for both migration time and peak current (n=7). It has been successfully applied to analyze the actual samples with satisfactory assay results.     

Highly sensitive simultaneous detection of cultured cellular thiols by laser induced fluorescence-capillary electrophoresis

We have recently described a new method to determine physiological thiols, in which the quantification of plasma homocysteine, cysteine, cysteinylglycine, glutathione, and glutamylcysteine was achieved after derivatization with 5-iodoacetamidofluorescein. Samples were separated and measured by capillary electrophoresis with laser-induced fluorescence in an uncoated fused-silica capillary, using a phosphate/borate run buffer and the organic base N-Methyl-D-glucamine as effective electrolyte addictive to obtain a baseline peak separation. In this paper, we propose an improvement of our method useful for the analysis of the intracellular thiols in different cultured cells. In particular, we studied run buffer and injection conditions in order to increase the sensitivity of the assay and we found that, by incrementing two times the injected volume and using the water plug before the sample injection, the sensitivity of our previous method was increased by about ten times. To maintain a good resolution between peaks, particularly between homocysteine and the internal standard d-penicillamine, we lengthened the run time by incrementing the concentration of the electrolyte buffer and the organic base d-glucamine and by decreasing the cartridge temperature from 40 to 25 degrees C. After these changes in electrophoretical parameters, cellular thiols were baseline-resolved in less than 14 min instead of 9 min as in our previous method, but the limit of quantification is increased from 50 to 1 nmol/L. This new procedure allows also to measure the intracellular thiols commonly found at low concentration, such as cysteinylglycine, glutamylcysteine, and homocysteine. The new analytical method performance was assessed by measuring the intracellular thiols in three different cell lines, i.e., HUVEC, ECV304, and R1 stem cells.     

Application of Hadamard transformation to MEKC

The Hadamard transform (HT) technique, which permits the S/N in CE to be improved, was applied to MEKC. Multiple sample injection of fluorescent analytes according to a Hadamard code sequence was performed using an optically gated sample injection technique, in which a sample plug was produced based on photodegradation by irradiation with an intense laser beam. The capillary and reservoirs were filled with a sample solution containing buffer components and SDS as a pseudostationary phase. A preliminary study confirmed that fluorescein ion could be photobleached in the presence of SDS. The optically gated sample injection technique was then applied to multiple sample injection, based on a Hadamard matrix. The S/N in the electropherogram obtained by HT-MEKC was improved substantially compared to that obtained by a single injection method. When the technique was applied to the separation of several amino acids labeled with FITC, the S/N ratio for each amino acid was enhanced, without any evidence of degradation in separation resolution. Moreover, HT-MEKC was applied to the analysis of amino acids contained in a Japanese beverage, resulting in improved S/Ns for the amino acids.     

Micellar electrokinetic chromatography as a fast screening method for the determination of 1,4-dihydropyridine calcium antagonists

A micellar electrokinetic chromatographic method (MEKC) was optimized for the separation of six calcium antagonists. The effects of the buffer (concentration and pH), concentration of sodium dodecyl sulphate (SDS), the organic modifier, the injection time, and the voltage applied were studied. A final appropriate electrolyte of 50 mM borate buffer, pH 8.2, containing 20 mM SDS and 15% (v/v) acetonitrile was found to provide the optimum separation with respect to resolution and migration time. The samples were introduced hydrostatically for 4 s at 50 mbar injection pressure and the applied voltage was +25 kV. The screening of the six compounds was achieved in less than 15 min: nifedipine (migration time, tm = 6.9 min), nimodipine (tm = 10.1 min), felodipine (tm = 12.2 min), nicardipine hydrochloride (tm = 12.7 min), lacidipine (tm = 13.5 min) and amlodipine besylate (tm = 14.1 min, tm = 8 min). The method developed showed to be linear at least up to 70 micrograms/ml with a detection limit of about 5 micrograms/ml for each compound. The within-day and inter-day area reproducibility (R.S.D.) were, respectively, lower than 4.8 and 8.6% for six replicate samples.     

Determination of histamine and histidine by capillary zone electrophoresis with pre-column naphthalene-2,3-dicarboxaldehyde derivatization and fluorescence detection

A rapid and sensitive method was developed for the simultaneous determination of histamine and histidine by capillary zone electrophoresis with lamp-induced fluorescence detection. A fluoregenic derivatization reagent, naphthalene-2,3-dicarboxaldehyde (NDA) was successfully applied to label the histamine and histidine respectively. The derivatization conditions and separation parameters including pH and concentration of electrolyte and sample injection were optimized in detail. The optimal derivatization reaction was performed with 1.0 mM NDA, 20 mM NaCN, and 20 mM borate buffer, pH 9.1 for 15 min. The separation of NDA-tagged histamine and histidine could be achieved in less than 200 s with 40 mM phosphate buffer (pH 5.8) as the running buffer. The detection limits for histamine and histidine were 5.5 x 10(-9) and 3.8 x 10(-9) M, respectively (S/N = 3). The relative standard derivations for migration time and peak height of derivatives were less than 1.5 and 5.0%, respectively. The method was successfully applied to the analysis of histamine and histidine in the P815 mastocytoma cells and the beer samples.     

Assay of melamine in milk products with a pH‐mediated stacking technique in capillary electrophoresis

A pH‐mediated stacking method in capillary electrophoresis as an assay for low concentrations of melamine in milk products was established. Real samples were treated with acetone and sodium acetate and injected directly after centrifugation and filtration. Several experimental factors, such as buffer pH, buffer concentration, sample matrix, injection/sweeping ratio, sweeping time/voltages, separation voltages, as well as sample pretreatment, which affected stacking and separation, were investigated and optimized. Under the selected condition, a low LOD of 0.01 μmol/L (S/N = 5) and a wide range of linearity of 0.01～1.0 μmol/L could be easily achieved with a good reproducibility (RSDs < 5.8% for both migration time and peak area) and an acceptable recovery of 94.0～103.2% (for milk, infant formula, yogurt, and milk products). The proposed method was suitable for routine assay of melamine in real milk samples.