The Mg-oppenauer oxidation as a mild method for the synthesis of aryl and metallocenyl ketones

Magnesium alkoxides undergo a hydride-transfer oxidation with benzaldehyde as the oxidant. This magnesium variant of the Oppenauer oxidation was used for the synthesis of polyfunctional biaryl ketones. LiCl was found to promote this reaction by enhancing the solubility of magnesium alkoxides. This mild oxidation method was especially useful for preparing ketones bearing a metallocenyl unit as well as various new ferrocenyl ketones and tricarbonylchromium complexes. This last class of ketones was reduced with the CBS catalyst (CBS=Corey-Bakshi-Shibata, diphenyl oxazaborolidine) to chiral benzhydrol complexes with high enantioselectivity enabling an asymmetric synthesis of electron-rich or -poor benzhydryl alcohols (up to 94 % ee).     

Synthesis of fluorine-substituted [2.2]paracyclophane-based carbene precursors for copper-catalyzed enantioselective boration of α,β-unsaturated ketones

Fluorine-substituted [2.2]paracyclophane-based carbene precursors have been successfully synthesized and applied to copper-catalyzed asymmetric β-boration of α,β-unsaturated ketones. Fluorination of the planar chiral carbenes has a beneficial impact on the catalytic performance of the relevant complexes. A variety of chiral β-boryl ketones were obtained in excellent yields (up to 99%) and with high enantioselectivities (up to 99% ee).     

Highly efficient hydrophosphonylation of aldehydes and unactivated ketones catalyzed by methylene-linked pyrrolyl rare earth metal amido complexes

A series of rare earth metal amido complexes bearing methylene-linked pyrrolyl-amido ligands were prepared through silylamine elimination reactions and displayed high catalytic activities in hydrophosphonylations of aldehydes and unactivated ketones under solvent-free conditions for liquid substrates. Treatment of [(Me(3)Si)(2)N](3)Ln(μ-Cl)Li(THF)(3) with 2-(2,6-Me(2)C(6)H(3)NHCH(2))C(4)H(3)NH (1, 1 equiv) in toluene afforded the corresponding trivalent rare earth metal amides of formula {(μ-η(5):η(1)):η(1)-2-[(2,6-Me(2)C(6)H(3))NCH(2)](C(4)H(3)N)LnN(SiMe(3))(2)}(2) [Ln=Y (2), Nd (3), Sm (4), Dy (5), Yb (6)] in moderate to good yields. All compounds were fully characterized by spectroscopic methods and elemental analyses. The yttrium complex was also characterized by (1)H NMR spectroscopic analyses. The structures of complexes 2, 3, 4, and 6 were determined by single-crystal X-ray analyses. Study of the catalytic activities of the complexes showed that these rare earth metal amido complexes were excellent catalysts for hydrophosphonylations of aldehydes and unactivated ketones. The catalyzed reactions between diethyl phosphite and aldehydes in the presence of the rare earth metal amido complexes (0.1 mol%) afforded the products in high yields (up to 99%) at room temperature in short times of 5 to 10 min. Furthermore, the catalytic addition of diethyl phosphite to unactivated ketones also afforded the products in high yields of up to 99% with employment of low loadings (0.1 to 0.5 mol%) of the rare earth metal amido complexes at room temperature in short times of 20 min. The system works well for a wide range of unactivated aliphatic, aromatic or heteroaromatic ketones, especially for substituted benzophenones, giving the corresponding α-hydroxy diaryl phosphonates in moderate to high yields.     

Dramatic ligand effect in catalytic asymmetric reductive aldol reaction of allenic esters to ketones

A general catalytic asymmetric reductive aldol reaction of allenic esters to ketones is described. Two distinct constitutional isomers were selectively produced depending on the reaction conditions. A combination of CuOAc/(R)-DTBM-SEGPHOS/PCy3 as the catalyst predominantly produced gamma-cis-products in high yield with excellent enantioselectivity (up to 99% ee). The reaction was applicable to both aromatic and aliphatic ketones, including unsaturated ketones. On the other hand, CuF-Taniaphos complexes produced alpha-aldol products with high diastereo- and enantioselectivity (up to 84% ee). The new Taniaphos derivative L3, containing di(3,5-xylyl)phosphine and morpholine units, produced optimum results in the alpha-selective reaction. The products are versatile chiral building blocks in organic synthesis. Furthermore, the basic reaction pattern (i.e., conjugate addition-aldol reaction) was extended to a catalytic enantioselective alkylative aldol reaction to ketones using dialkylzinc reagents as the initiator.     

Chiral Phebox-rhodium complexes as catalysts for asymmetric direct aldol reaction

Chiral bis(oxazolinyl)phenyl-rhodium complexes act as catalysts in the combination of AgOTf for direct aldol reaction of ketones and aromatic aldehydes to give the corresponding β-hydroxyketones in high anti-selectivity and a good to high enantioselectivity up to 91% ee.     

Palladium-catalyzed asymmetric arylation,vinylation, and allenylation of tert-cyclobutanols via enantioselective C-C bond cleavage

A novel enantioselective C-C bond cleavage has been achieved using palladium catalysts and chiral N,P-bidentate ligands in the asymmetric arylation, vinylation, and allenylation of tert-cyclobutanols. In these reactions, the enantioselective beta-carbon elimination of Pd(II) alcoholate formed in situ is the key step. Treatment of tert-cyclobutanols with arylating reagents in toluene in the presence of Pd(OAc)(2), a chiral ferrocene-containing N,P-bidentate ligand, and Cs(2)CO(3) affords optically active gamma-arylated ketones in excellent yields with high enantioselectivity (up to 95% ee). When vinylating reagents are used in place of arylating ones, the asymmetric vinylation also proceeds to afford optically active gamma-vinylated ketones in high yields with good to high enantioselectivity. When propargylic acetates are used, which are known to generate (sigma-allenyl)palladium complexes with Pd(0) species, asymmetric allenylation occurs to afford optically active gamma-allenylated ketones in moderate to good yields with moderate to high enantioselectivity.     

Synthesis of spiro diphosphines and their application in asymmetric hydrogenation of ketones

Synthesis of chiral diphosphine ligands containing a spiro scaffold was described. The ruthenium complexes of these spiro ligands were found to have extremely high activities (S/C up to 100 000) and enantioselectivities (ee up to 99.5%) in the asymmetric hydrogenation of aromatic, heteroaromatic, and alpha,beta-unsaturated ketones.     

New and efficient catalysts for enantioselective borohydride reduction of ketones and imines

Optically active aldiminato cobalt(II) complexes have been found to catalyze the enantioselective reduction of ketones with sodium borohydride affording the corresponding optically active secondary alcohols in high chemical yields with high enantioselectivities. The enantioselective borohydride reduction is also applicable to not only C=O bonds in aromatic ketones but also to C=N bonds in aromatic imines.     

Transfer hydrogenation of ketones catalyzed by 2,6‐bis(triazinyl)pyridine ruthenium complexes: The influence of alkyl arms

The transfer hydrogenation of ketones catalyzed by transition metal complexes has attracted much attention. A series of ruthenium(II) complexes bearing 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)pyridine ligands (R-BTPs) were synthesized and characterized by NMR analysis and X-ray diffraction. These ruthenium(II) complexes were applied in the transfer hydrogenation of ketones. Their different catalytic activity were attributed to the alkyl arms on the 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)pyridine. As the length of the alkyl arms rising, the catalytic activities of the complex catalysts decreased. By means of 0.4 mol % catalyst RuCl₂(PPh₃)(3-methylbutyl-BTP) in refluxing 2-propanol, a variety of ketones were reduced to their corresponding alcohols with >95% conversion over a period of 3 h. © 2019 Elsevier Science. All rights reserved.     

Rhodium(I) complexes with N-heterocyclic carbenes bearing a 2,3,4,5-tetraphenylphenyl and its higher dendritic frameworks

Novel rhodium(I) complexes with N-heterocyclic carbenes bearing a 2,3,4,5-tetraphenylphenyl and its higher dendritic frameworks were synthesized and the complexes were used as catalysts in rhodium-catalyzed hydrosilylation of alpha,beta-unsaturated ketones to show high 1,4-adduct selectivity.     

手性羰基铁体系催化酮的不对称氢转移氢化

手性羰基铁络合物很少被用于芳香酮的不对称氢转移氢化.利用不同的羰基铁络合物与手性双胺双膦配体现场络合,形成手性胺膦铁催化体系.考察了它们对多种芳香酮的不对称氢转移催化氢化性能.结果表明,三核的手性胺膦铁簇合物是催化芳香酮不对称氢转移氢化的较好体系.当用三核的铁簇合物[Et₃NH]⁺[HFe₃(CO)₁₁]^-体系催化1,1-二苯基丙酮的氢化时,最高可获得98%的对映选择性.通过现场红外光谱测定,揣测羰基铁簇合物Fe₃(CO)₁₂在催化反应过程中保持三核的簇合物的簇骼不变.     

Copper-carbene complexes as catalysts in the synthesis of functionalized styrenes and aliphatic alkenes

(NHC)-Cu (NHC = N-heterocyclic carbene) complexes efficiently catalyzed the methylenation of a variety of aliphatic and aromatic aldehydes and ketones in the presence of trimethylsilyldiazomethane, triphenylphosphine, and 2-propanol. The copper catalysts are not only inexpensive compared to rhodium complexes, but they also exhibit better functional group compatibility with aromatic aldehydes and ketones. Indeed very high yields were obtained for the formation of styrenes containing nitro, trifluoromethyl, amino, and ester groups, as well as for pyridine-, pyrrole-, and indole-substituted alkenes.     

树状功能高分子负载锡配合物的合成及其催化酮的Baeyer-Villiger氧化反应性能研究

通过固相合成方法将聚酰胺-胺树状分子担载于氯球上,对其外围分别用2,4-二羟基苯甲醛和邻羟基苯甲醛进行修饰,再与SnCl2.2H2O反应,形成配体不同的两类树状高分子锡配合物.将此类配合物用作30%的双氧水氧化酮的Baeyer-Villiger反应的非均相催化剂,具有较好的催化活性.2-金刚烷酮、环己酮、3-甲基-2-戊酮等都转化为相应的酯和内酯,底物的转化率和产物选择性均较高.对2-羟基苯甲醛、2,4-二羟基苯甲醛和邻羟基苯甲醛修饰的不同类型催化剂催化下的反应进行比较,发现配体对锡的担载量和催化活性均有不同程度的影响.其中邻羟基苯甲醛修饰的配合物因具有较高的锡担载量而具有了最佳的催化活性.此催化体系使用环境友好的低浓度双氧水为氧化剂,催化剂制备方法简单、催化反应完成时间短、催化剂在多次重复利用后活性没有明显降低,可回收和重复利用.     

Direct observation of beta-aryl eliminations from Rh(I) alkoxides

beta-Aryl eliminations from a series of rhodium(I) alkoxides to form rhodium aryl complexes and free ketones are reported. Tertiary phenylmethoxide complexes [Rh(PEt3)n(OCPhRR')] (n = 2, 3) were prepared via alcoholysis of {Rh(PEt3)2[N(SiMe3)2} by the corresponding alcohols HOCPhRR' in the presence and absence of added PEt3. Heating of these complexes in the presence of added PEt3 generated the rhodium phenyl complex, (PEt3)3RhPh, and the corresponding ketones in good to high yields. Kinetic results are most consistent with irreversible beta-phenyl elimination from a bisphosphine-ligated rhodium alkoxide complex. Such bisphosphine complexes result from ligand dissociation from the trisphosphine complexes and have been isolated in some cases. The bisphosphine complexes are stabilized by Rh-Cphenyl interactions, as evidenced by an X-ray structure, and this structure with a metal-aryl interaction likely illustrates the pathway for C-C bond cleavage.     

Highly Efficient Hydrophosphonylation of Aldehydes and Unactivated Ketones Catalyzed by Methylene‐Linked Pyrrolyl Rare Earth Metal Amido Complexes

A series of rare earth metal amido complexes bearing methylene‐linked pyrrolyl‐amido ligands were prepared through silylamine elimination reactions and displayed high catalytic activities in hydrophosphonylations of aldehydes and unactivated ketones under solvent‐free conditions for liquid substrates. Treatment of [(Me₃Si)₂N]₃Ln(μ‐Cl)Li(THF)₃ with 2‐(2,6‐Me₂C₆H₃NHCH₂)C₄H₃NH ( 1 , 1 equiv) in toluene afforded the corresponding trivalent rare earth metal amides of formula {(μ‐η⁵:η¹):η¹‐2‐[(2,6‐Me₂C₆H₃)NCH₂](C₄H₃N)LnN(SiMe₃)₂}₂ [Ln=Y ( 2 ), Nd ( 3 ), Sm ( 4 ), Dy ( 5 ), Yb ( 6 )] in moderate to good yields. All compounds were fully characterized by spectroscopic methods and elemental analyses. The yttrium complex was also characterized by ¹H NMR spectroscopic analyses. The structures of complexes 2 , 3 , 4 , and 6 were determined by single‐crystal X‐ray analyses. Study of the catalytic activities of the complexes showed that these rare earth metal amido complexes were excellent catalysts for hydrophosphonylations of aldehydes and unactivated ketones. The catalyzed reactions between diethyl phosphite and aldehydes in the presence of the rare earth metal amido complexes (0.1 mol %) afforded the products in high yields (up to 99 %) at room temperature in short times of 5 to 10 min. Furthermore, the catalytic addition of diethyl phosphite to unactivated ketones also afforded the products in high yields of up to 99 % with employment of low loadings (0.1 to 0.5 mol %) of the rare earth metal amido complexes at room temperature in short times of 20 min. The system works well for a wide range of unactivated aliphatic, aromatic or heteroaromatic ketones, especially for substituted benzophenones, giving the corresponding α‐hydroxy diaryl phosphonates in moderate to high yields.     

Catalytic enantioselective borohydride reduction of ortho-fluorinated benzophenones

[reaction: see text] In the presence of the optically active ketoiminatocobalt(II) complexes, the enantioselective borohydride reduction of benzophenones was successfully completed. The fluorine atom on the ortho position of the benzophenone and aryl ketones proved effective for obtaining high enantioselectivities. The combined use of modified lithium borohydride afforded the corresponding benzhydrols and arylcarbinols in high yield and high enantioselectivity (88-96% ee).     

Air-stable catalysts for highly efficient and enantioselective hydrogenation of aromatic ketones

A series of chiral trans-[RuCl(2)(dipyridylphosphine)(1,2-diamine)] complexes have been synthesized and characterized by NMR and single-crystal X-ray diffraction studies. These Ru complexes combined with (CH(3))(3)COK in 2-propanol formed a very effective catalyst system for the hydrogenation of a diverse range of simple aromatic ketones with high activity (substrate-to-catalyst ratio up to 100 000) and excellent enantioselectivity (up to >99.9%). The catalyst system was also found to be stable in solution even under a normal atmosphere.     

Ruthenium complexes of phosphine-aminophosphine ligands

Ruthenium complexes of phosphinoferrocenylaminophosphine ligands (BoPhoz™ ligands) have been prepared by combining the ligands with tris(triphenylphosphine)ruthenium dichloride and precipitating the complexes. The optimal species exhibit high enantioselectivities for the asymmetric hydrogenation of functionalized ketones, particularly β-ketoesters.     

NHC–Copper(I) Halide‐Catalyzed Direct Alkynylation of Trifluoromethyl Ketones on Water

An efficient and easily scalable NHC–copper(I) halide‐catalyzed addition of terminal alkynes to 1,1,1‐trifluoromethyl ketones, carried out on water for the first time, is reported. A series of addition reactions were performed with as little as 0.1–2.0 mol % of [(NHC)CuX] (X=Cl, Br, I, OAc, OTf) complexes, providing tertiary propargylic trifluoromethyl alcohols in high yields and with excellent chemoselectivity from a broad range of aryl‐ and more challenging alkyl‐substituted trifluoromethyl ketones (TFMKs). DFT calculations were performed to rationalize the correlation between the yield of catalytic alkynylation and the sterics of N‐heterocyclic carbenes (NHCs), expressed as buried volume (%VBur), indicating that steric effects dominate the yield of the reaction. Additional DFT calculations shed some light on the differential reactivity of [(NHC)CuX] complexes in the alkynylation of TFMKs. The first enantioselective version of a direct alkynylation in the presence of C₁‐symmetric NHC–copper(I) complexes is also presented.     

New iron(II) α-iminopyridine complexes and their catalytic activity in the oxidation of activated methylene groups and secondary alcohols to ketones

A set of iron(II) complexes of the general formula [Fe(OTf)(2)L(2)] was synthesized in 32 to 78% isolated yields, where L represents a bidentate α-iminopyridine ligand. Four of the iron complexes were characterized structurally, revealing a rich coordination chemistry, because the coordination geometry of the iron complexes strongly depends on the substitution pattern exhibited by the ligands L. The catalytic activity of the new complexes was demonstrated in the oxidation of cyclohexane, activated methylene groups and secondary alcohols to the corresponding ketones utilizing H(2)O(2) and t-BuOOH as the oxidants. The oxidation of activated methylene groups and secondary alcohols to the corresponding ketones with t-BuOOH gave isolated yields between 22 and 91% (4 h, room temperature, 3% catalyst load). The influence of the structure of the ligand on the activity of the corresponding metal complex is also reported. Furthermore, UV-vis experiments were performed which provided evidence for the formation of an [Fe-O-O-t-Bu] intermediate.