A model study for coatings containing hexamethoxymethylmelamine

Using a model reaction we have studied the crosslinking chemistry of hydroxy-functional polymers and hexamethoxymethylmelamine. The transetherification of optically active monofunctional alcohols and hexamethoxymethylmelamine was monitored with polarimetry and ¹H-NMR. The reaction rate constants for both the forward (k₁) and the backward (k_?1) reaction of the sulphonic-acid-catalyzed alcoholysis were determined. Primary and secondary alcohols showed the same reaction rate and activation energy (E_a = 96 kJ/mol) for the forward reaction. However, the backward reaction in the equilibrium is considerably slower for primary alcohols than for secondary alcohols, with activation energies of E_a = 96 and 79 kJ/mol, respectively. When amine salts of sulphonic acids are used as catalysts, the E_a is increased from 97 to 116 kJ/mol in the case of primary alcohols. In concentrated aprotic solutions the reaction order in acid is 2.5. The same order in acid is found for the alcoholysis of acetaldehyde diethyl acetal. All the results strongly support the statement that the crosslinking reaction proceeds by an Sn-1 mechanism. The results of this model study are compared with results obtained in network-forming reactions. The important role of the evaporation of the condensation product methanol is discussed.     

呋喃西林水溶液在光和热作用下的稳定性

The influence of both light and heat on the stability of nitrofurazone aqueous solution was studied. Results show that in either heating experiments or the exposure to light at high temperatures, the degradation rate obeyed zero-order kinetics. The total rate constant ktotal caused by both light and heat can be divided into two parts: ktotal =kdark klight, where kdark and klight are the degradation rate constants caused by heat and light, respectively. The klight can be expressed as klight=Alight*exp(-Ea,light/RT)*E, where E is the illuminance of light, and Alight and Ea,light both are experimental constants. The values of these kinetic parameters were determined based on the experiments in the dark and upon exposure to three different light sources. Results show that the values of Alight and Ea, light varied with the light source. To save time, labor, and drugs, exponential heating experiments were employed and compared with the isothermal experiments. Results indicated that kinetic parameters obtained by exponential heating experiments are comparable to those obtained by isothermal experiments either in the dark or upon exposure to light.     

Kinetics of the oxidative degradation of d-xylose in the presence and absence of cationic and anionic surfactants

The oxidative degradation of d-xylose by cerium(IV) has been found to be slow in acidic aqueous solution with the evidence of autocatalysis. The reaction is accelerated in the cetyltrimethylammonium bromide (CTAB) micellar medium but sodium dodecyl sulfate (an anionic surfactant) has no effect. The pseudo first-order rate constants have been determined at different [reductant], [oxidant], [H₂SO₄], temperature, and [CTAB]. The reaction rate increased with increasing [d-xylose] and decreased with increase in [H₂SO₄]. The CTAB-micelle-catalyzed kinetic results can be interpreted by the pseudophase model. The kinetic parameters such as association constant (K _s), micellar medium rate constant (k _m), and activation parameters (E _a, ΔH ^# and ΔS ^#) are evaluated and the reaction mechanism is proposed. The reaction rate is inhibited by electrolytes and the results provide an evidence for the exclusion of the reactive species from the reaction site.     

Tempo-initiated oxidation of o-phenylenediamine to 2,3-diaminophenazine

The oxidation reaction of o-phenylenediamine (PDA) to 2,3-diaminophenazine (DAP) initiated by 2,2,6,6-tetramethyl-1-piperidinyloxyl (TEMPO) has been investigated in methanol at ambient temperature. The oxidation of PDA was followed by electronic spectroscopy and the rate constants were determined according to the rate law -d[PDA]/dt = k _obs[PDA][TEMPO]. The rate constant, activation enthalpy and entropy at 323 K are as follows: k _obs (dm³ mol^-1 s^-1) = (3.60±0.13) × 10^-6, E _a (kJ mol^-1) = 76±11, DH (kJ mol^-1) = 74±10, DS (J mol^-1 K^-1) = -122±31.     

Absolute rate constants for the addition of hydroxymethyl radicals to alkenes in methanol solution

Absolute rate constants and their temperature dependencies were determined for the addition of hydroxymethyl radicals (CH₂OH) to 20 mono- or 1,1-disubstituted alkenes (CH₂ = CXY) in methanol by time-resolved electron spin resonance spectroscopy. With the alkene substituents the rate constants at 298 K (k₂₉₈) vary from 180 M^?1s^?1 (ethyl vinylether) to 2.1 middot; 10⁶ M^?1s^?1 (acrolein). The frequency factors obey log A/M^?1s^?1 = 8.1 ± 0.1, whereas the activation energies (E_a) range from 11.6 kJ/mol (methacrylonitrile) to 35.7 kJ/mol (ethyl vinylether). As shown by good correlations with the alkene electron affinities (EA), log k₂₉₈/M^?1s^?1 = 5.57 + 1.53 · EA/eV (R² = 0.820) and E_a = 15.86 ? 7.38 · EA/eV (R² = 0.773), hydroxymethyl is a nucleophilic radical, and its addition rates are strongly influenced by polar effects. No apparent correlation was found between E_a or log k₂₉₈ with the overall reaction enthalpy. © 1995 John Wiley & Sons, Inc.     

Kinetics and mechanism of the reaction of allyl chloride with trichlorosilane catalyzed by carbon‐supported platinum

The kinetics of substrate conversions in the commercially important hydrosilylation of allyl chloride with trichlorosilane, catalyzed by active carbon‐supported platinum, as well as the yields of the main product (3‐chloropropyltrichlorosilane) and by‐products (tetrachlorosilane, propyltrichlorosilane) have been studied. On the basis of the measurements performed, the pseudo first‐order rate constants (k_obs, k₁ and k₂ from the model of competitive reactions) and activation energy (E_a = 11 kcal mol^?1 (46.2 kJ mol^?1)) were determined. The data obtained point to a non‐linear dependence of k_obs on the catalyst amount. From the kinetic relationships, the kinetic equation was deduced. All the results of kinetic, IR spectroscopic and thermogravimetric measurements, as well as the derived kinetic equation, have confirmed the general model of consecutive–competitive reaction involving the formation of a surface complex C₁ which can decompose in two directions according to the Chalk–Harrod mechanism. Copyright © 2003 John Wiley & Sons, Ltd.     

Chain transfer by addition–substitution–fragmentation mechanism. I. End–functional polymers by a single-step free radical transfer reaction: Use of a new allylic linear peroxyketal

A new chain transfer agent, ethyl 2-[1-(1-n-butoxyethylperoxy) ethyl] propenoate (EBEPEP) was used in the free radical polymerization of methyl methacrylate (MMA), styrene (St), and butyl acrylate (BA) to produce end-functional polymers by a radical addition–substitution–fragmentation mechanism. The chain transfer constants (C_tr) for EBEPEP in the three monomers polymerization at 60°C were determined from measurements of the degrees of polymerization. The C_tr were determined to be 0.086, 0.91, and 0.63 in MMA, St, and BA, respectively. EBEPEP behaves nearly as an “azeotropic” transfer agent for styrene at 60°C. The activation energy, E_atr, for the chain transfer reaction of EBEPEP with PMMA radicals was determined to be 29.5 kJ/mol. Thermal stability of peroxyketal EBEPEP in the polymerization medium was estimated from the DSC measurements of the activation energy, E_ath = 133.5 kJ/mol, and the rate constants, k_th, of the thermolysis to various temperature. © 1994 John Wiley & Sons, Inc.     

Study of catalase immobilized on a silicate matrix for non-aqueous biocatalysis

Catalytic activity of catalase (CAT) immobilized on a modified silicate matrix to mediate decomposition of meta-chloroperoxibenzoic acid (3-CPBA) in acetonitrile has been investigated by means of quantitative UV-spectrophotometry. Under the selected experimental conditions, the kinetic parameters: the apparent Michaelis constat (K _M ), the apparent maximum rate of enzymatic reaction (V _max ^app ), the first order specific rate constants (k _sp ), the energy of activation (E _a ) and the pre-exponential factor of the Arrhenius equation (Z₀) were calculated. Conclusions regarding the rate-limiting step of the overall catalytic process were drawn from the calculated values of the Gibbs energy of activation ΔG^*, the enthalpy of activation ΔH^*, and the entropy of activation ΔS^*.     

Comparison of antibody and albumin catalyzed hydrolysis of steroidalp-nitrophenylcarbonates

A monoclonal antibody (MAb) was produced against thep-nitrophenylphosphate derivative of 3α,5β-lithocholic acid, a transition-state analog for hydrolysis of a steroidalp-nitrophenylcarbonate. The indicated reaction was catalyzed by this Ab with kinetic constants k_cat = 4.0 × 10^-2min and K_m = 3.3 μM at pH 9.0 and 35°C. The Ab also hydrolyzed the isomericp-nitrophenylcarbonate of 3β,5β-lithocholic acid with k_cat = 8.4 × 10^-2/min and K_m = 1.0 μM. Bovine serum albumin (BSA) was found to catalyze the same reactions with similar turnover rates and Michaelis constants of 15 and 14 μM, respectively. Although the BSA-catalyzed reaction was only weakly inhibited by the phosphate ester TSA (IC₅₀ ca. 40 μM), the Ab-catalyzed reaction was completely inhibited at less than 1 μM of the TSA. The relative rates and efficiencies of the MAbcatalyzed and BSA-catalyzed reactions are discussed in the context of the hydrophobic sites and intrinsic reactivity of the protein surfaces, and the induction of groups on the Ab to enhance the enzymatic function.     

Simulaaneous ethanol and cellobiose inhibition of cellulose hydrolysis studied with integrated equations assuming constant or variable substrate concentration

The integrated forms of the Michaelis-Menten equation assuming variable substrate (depletion) or constant substrate concentration were used to study the effect of the simultaneous presence of two exoglucanase Cel7A inhibitors (cellobiose and ethanol) on the kinetics of cellulose hydrolysis. The kinetic parameters obtained, assuming constant substrate (K _m =21 mM, K _ic =0.035 mM; K _icl =1.5×10¹⁵mM; k _cat=12 h⁻¹) or assuming variable substrate (K _m =16 mM, K _ic =0.037 mM; K _icl =5.8×10¹⁴ mM; k _cat=9 h⁻¹), showed a good similarity between these two alternative methodologies and pointed out that bothethanol and cellobiose are competitive inhibitors. Nevertheless, ethanol is a very weak inhibitor, as shown by the large value estimated for the kinetic constant K _icl . In addition, assuming different concentrations of initial accessible substrate present in the reaction, both inhibition and velocity constants are at the same order of magnitude, which is consistent with the obtained values. The possibility of using this kind of methodology to determine kinetic constants in general kinetic studies is discussed, and several integrated equations of different Michaelis-Menten kinetic models are presented. Also examined is the possibility of determining inhibition constants without knowledge of the true accessible substrate concentration.     

Steady-State Kinetics of Aminopeptidase Catalysis: A Stopped-Flow Radiationless Energy Transfer Study

Stopped-flow radiationless energy transfer experiments have been carried out to investigate the hydrolysis of some dansyl peptide substrates (S) catalyzed by aminopeptidase (E). RET between enzyme tryptophanyl residues and the dansyl group in the substrate allowed direct observation and quantitation of the enzyme-substrate (ES) complexes. Analysis of the stopped-flow RET traces gives k_cat = 1.32 s^?1 and K_M = 47 μM for Leu-Ala-NH(CH₂)₂NH-Dns (Leu-Ala-DED) and k_cat = 4.80 s^?1 and K_M = 196 μM for Leu-Gly-NH(CH₂)₂NH-Dns (Leu-Gly-DED). The activation energies of the enzymatic reactions were determined from the Arrhenius plots to be 57 and 38 kJ mol^?1 for Leu-Ala-DED and Leu-Gly-DED, respectively. The kinetic results indicate that the enzyme binds Leu-Ala-DED more tightly than Leu-Gly-DED as revealed by a small value of K_M. That this enzyme catalyzes the turnover of Leu-Gly-DED more efficiently than Leu-Ala-DED is reflected in a large value of k_cat and a small activation energy. The RET signals during the hydrolysis of Leu-Val-NH(CH₂)₂NH-Dns were extremely weak probably because of the inefficient energy transfer in the ES complex or the retention of the product in the enzyme after completion of the reaction. Aminopeptidase was inactive towards the dansyl compounds of the single amino acid studied. This fact may be due to an unfavorable conformation of these compounds in the ES complexes (small k_cat) or a weak binding of the substrates to the enzyme (large K_M) or both.     

A kinetic study of the oxidation of L-ascorbic acid by chromium(VI)

The reaction between chromium(VI) and L-ascorbic acid has been studied by spectrophotometry in the presence of aqueous citrate buffers in the pH range 5.69–7.21. The reaction is slowed down by an increase of the ionic strength. At constant ionic strength, manganese(II) ion does not exert any appreciable inhibition effect on the reaction rate. The rate law found is where K_p is the equilibrium constant for protonation of chromate ion and k_r is the rate constant for the redox reaction between the active forms of the oxidant (hydrogenchromate ion) and the reductant (L-hydrogenascorbate ion). The activation parameters associated with rate constant k_r are E_a = 20.4 ± 0.9 kJ mol^?1, ΔH^≠ = 17.9 ± 0.9 kJ mol^?1, and ΔS^≠=?152 ± 3 J K^?1 mol^?1. The reaction thermodynamic magnitudes associated with equilibrium constant K_p are ΔH⁰ = 16.5 ± 1.1 kJ mol^?1 and ΔS⁰ = 167 ± 4 J K^?1 mol^?1. A mechanism in accordance with the experimental data is proposed for the reaction. © 1993 John Wiley & Sons, Inc.     

A quartz crystal microbalance study of β-cyclodextrin self assembly on gold and complexation of immobilized β-cyclodextrin with adamantane derivatives

Quartz crystal microbalance (QCM) was used to study the self-assembly of per-6-thio-β-cyclodextrin (t₇-βCD) on gold surfaces, and the subsequent inclusion interactions of immobilized βCD with adamantane-poly(ethylene glycol) (5,000 MW, AD-PEG), 1-adamantanecarboxylic acid (AD-C) and 1-adamantylamine (AD-A). From a 50 μM solution of t₇-βCD in 60:40 DMSO:H₂O, a t₇-βCD layer was formed on gold with surface density of 71.7 ± 2.7 pmol/cm², corresponding to 80 ± 3% of close-packed monolayer coverage. Gold sensors with immobilized t₇-βCD were then exposed alternately to six different concentrations of AD-PEG, 500 μM AD-C or 500 μM AD-A aqueous solutions for association, and water for dissociation. Association of AD-PEG conformed to a Langmuir isotherm, with a best fit equilibrium constant K = 125,000 ± 18,000 M⁻¹. For AD-C and AD-A, association (k _a ) and dissociation (k _d ) rate constants were extracted from kinetic profiles by fitting to the Langmuir model, and equilibrium constants were calculated. The parameters for AD-C were found to be: k _a = 100 ± 5 M⁻¹ s⁻¹, k _d = 110 (±18) × 10⁻⁴ s⁻¹, and K = 9,400 ± 1,700 M⁻¹. For AD-A, k _a = 58 ± 6 M⁻¹ s⁻¹, k _d = 154 (±7) × 10⁻⁴ s⁻¹, and K = 3,800 ± 400 M⁻¹. The results demonstrate the utility of QCM as a tool for studying small molecule surface adsorption and guest–host interactions on surfaces. More specifically, the kinetic and thermodynamic data of AD-C, AD-A, and AD-PEG inclusion with immobilized t₇-βCD form a basis for further surface association studies of AD-X conjugates to advance surface sensory and coupling applications.     

Determination of Kinetic Parameters of Ethyl Methacrylate Polymerization Initiated by the Redox Pair SO2-tert-Butyl Hydroperoxide

Abstract

In the bulk polymerization of ethyl methacrylate with the redox initiator pair sulfur dioxide-tert-butyl hydroperoxide (SO₂-TBHP), the kinetic parameters were determined by the dead-end polymerization technique using the dilatometric method. Polymerization was conducted with various initiator pair compositions in the temperature interval of 12–35°C. An activation energy of 14.1 kJ/mol for [SO₂]/[TBHP] = 0.44 was determined for this temperature range. The values of k ² _p/k _t obtained in this study were in the interval 1.34 × 10^?4 to 1.11 × 10^?3 L/mol·s. The f/k _d ratios for the redox pair at different temperatures and for different initiator ratios were also calculated. The f/k _d ratios of the initiator pair changed between 15.1 and 187.6 seconds. The wide variations in these kinetic parameters were explained on the basis of competitive reactions between the redox pair and their reaction products.     

Pedagogic Interest of the H2O2, Cu2+, SCN-, OH- Oscillating Reaction

Chemical reactivity is generally taught by considering the chemical properties of the reacting entities (acid-base, oxidation-reduction, complexation, and precipitation) and the values of the corresponding equilibrium thermodynamic constants (K_a, E⁰ K_d, K_s). This approach, however, is not well-suited to the dynamic chemical systems that are often encountered in industrial and environmental chemistry where nonequilibrium conditions prevail. In this respect, oscillating reactions are a good illustration of the limits of equilibrium thermodynamics and show the need for a complementary dynamic nonequilibrium study. We describe here an oscillating reaction that is easy to carry out in an inorganic chemistry practical class as it uses common reactants (H₂O₂, KSCN, CuSO₄, NaOH). This example should enable students to obtain a more realistic grasp of chemical reactivity based on a comprehension of coupled reaction processes, similar to those encountered in population dynamics or in enzymatic regulation.     

Rheologic studies on chemical cross-linking kinetics for LDPE

Crosslinking reaction of LDPE resin in the presence of dicumyl peroxide(DCP) was studied by isothermal rheological measurements at different temperatures and non-isothermal differential scanning calorimetry(DSC) technique with different heating rates.The kinetic parameters of crosslinking reaction were calculated by both rheological and DSC measurements.The results reveal that with the increase of DCP contents,the apparent activation energy,E_a,ranges from about 140 kj/mol to 170 kj/mol and the order of crosslinking reaction,n,approaches unity.The influence of measurement frequency,ω,on crosslinking reaction was also investigated.It can be found that n does not change with the increase ofω, and E_a decreases slightly with the increase ofω.     

Kinetics of D,L–Lactide Polymerization Initiated with Zirconium Acetylacetonate

The kinetic of D,L-lactide polymerization in presence of biocompatible zirconium acetylacetonate initiator was studied by differential scanning calorimetry in isothermal mode at various temperatures and initiator concentrations. The enthalpy of D,L-lactide polymerization measured directly in DSC cell was found to be ΔH=−17.8±1.4 kJ mol⁻¹. Kinetic curves of D,L-lactide polymerization and propagation rate constants were determined for polymerization with zirconium acetylacetonate at concentrations of 250–1000 ppm and temperature of 160–220 °C. Using model or reversible polymerization the following kinetic and thermodynamic parameters were calculated: activation energy E_a=44.51±5.35 kJ mol⁻¹, preexponential constant lnA=15.47±1.38, entropy of polymerization ΔS=−25.14 J mol⁻¹ K⁻¹. The effect of reaction conditions on the molecular weight of poly(D,L-lactide) was shown.     

Synthetic thermally reversible gel systems. IV

The polymerization kinetics in water of acrylylglycinamide (AG) initiated by K₂S₂O₈ was studied over the temperature range 40.0 to 60.0°C. Monomer concentration was varied from 7.8 × 10^?3 to 31.2 × 10^?3M and catalyst from 1.85 × to 11.10 × 10^?5M. The rate expression is ?d[M]/dt = R_p, = k_1.22[K₂S₂O₈]^0.5[M]^1.22, and the overall empirical rate constant, k_1.22 = 1.14 × 10¹¹e^?15,800/RT 1.^0.72 mole^?0.72 min^?1. To explain the dependence on monomer, a kinetic scheme which includes a bimolecular reaction (k₂) between monomer and initiator is suggested. The simplified expression which describes the initial rate of polymerization is: ?d[M]/dt = R_p, = k₄(2[I]/k₅)^1/2[M](k₁ + k₂[M])^1/2, where k₁, k₂, k₄ and k₅ are rate constants for S₂O₈ = decomposition, a bimolecular reaction between monomer and initiator, propagation, and termination, respectively. Individual bimolecular rate constants are expressed in liter/mole-min. The equation predicts a dependence on monomer concentration between 1.0 and 1.5 with 1.5 being approached a t high monomer concentrations. Plots of R_P²/[M]² versus [M] are linear, as predicted by the postulated reaction route and values for k₂ and k₄/k₅^1/2 were obtained from the slopes and intercepts of these plots. The temperature dependence of the bimolecular monomer-initiator reaction is k₂ = 5.19 × 10²¹e^?36,000/RT. Instead of the usual behavior, the k₄/k₅^1/2 ratio was found to decrease with temperature and the difference of activation energies, (E₄ ? E₅/2), is ?1.50 kcal. The temperature dependence of the propagation to square root of the termination rate constant ratio is k₄/k₅^1/2 = 6.16e^1500/RT. These rather unusual results may be related to the ability of AG polymers in water to form thermally reversible gels; even above the gel melting points, the polymers are considerably aggregated in solution. This would tend to make the bimolecular termination reaction more temperature dependent and also account for the high values (59–69) for the k₄/k₅^1/2 ratios. For similar temperatures, the overall rate constants for AG are approximately four times those for acrylamide.     

Thermal Decomposition Behavior and Non-isothermal Decomposition Reaction of Copper（ll） Salt of 4-Hydroxy-3,5-dinitropyridine Oxide and Its Application in Solid Rocket Propellant

The thermal decomposition behavior and kinetic parameters of the exothermic decomposition reactions of the title compound in a temperature‐programmed mode have been investigated by means of DSC, TG‐DTG and lower rate Thermolysis/FTIR. The possible reaction mechanism was proposed. The critical temperature of thermal explosion was calculated. The influence of the title compound on the combustion characteristic of composite modified double base propellant containing RDX has been explored with the strand burner. The results show that the kinetic model function in differential form, apparent activation energy E_a and pre‐exponential factor A of the major exothermic decomposition reaction are 1‐a,207.98 kJ*mol^?1 and 10^15.64 s^?1, respectively. The critical temperature of thermal explosion of the compound is 312.87 C. The kinetic equation of the major exothermic decomposition process of the title compound at 0.1 MPa could be expressed as: dα/dT=10^16.42 (1–α)e‐2.502×10⁴/T As an auxiliary catalyst, the title compound can help the main catalyst lead salt of 4‐hydroxy‐3,5dinitropyridine oxide to enhance the burning rate and reduce the pressure exponent of RDX‐CMDB propellant.     

1,3-THIAZOLIDINIC AND 2,4,5,6-TETRAHYDRO-1,3-THIAZINIC SPIROCHROMENES AND MEROCYANINES. SYNTHESIS,REACTIVITY AND PHOTOCHROMIC PROPERTIES

Abstract

The acid catalyzed rate for hydrolysis of methylphosponfluoridic acid has been determined at several hydrogen ion concentrations and temperatures. The acid hydrolysis is second order (in acid and substrate). Assumed rate expressions, observed rate constants, and hydrogen ion concentrations were used to calculate the thermodynamic equilibrium constant (K _a=0.56) and rate constants for acid catalysis. The activation energy E _a has been determined as 18.3 Kcal/mole. Finally, the acid catalyzed deuterolysis was determined to be about 1.47 times the rate of hydrolysis. The data suggest a two-step mechanism consisting of a rapid proton transfer, followed by slow hydration of the protonated complex.