Multi-wall carbon nanotube counter electrodes for dye-sensitized solar cells prepared by electrophoretic deposition

In this study, electrophoretic deposition (EPD) was employed to fabricate multi-wall carbon nanotube (MWCNT) counter electrodes (CEs) for dye-sensitized solar cells (DSSCs). Firstly, raw MWCNTs were functionalized by means of an acid mixture solution and then subjected to EPD. The results obtained from Raman spectroscopy, Fourier transform infrared spectroscopy, field-emission scanning electron microscope, and cyclic voltammogram demonstrated that the defects and open ends on the MWCNTs can be obtained via chemical functionalization and thus facilitate the enhancement in the electrocatalytic activity for I₃⁻ reduction of MWCNT CEs. In addition to optimizing chemical functionalization of MWCNTs surface, the optimal thickness of MWCNT CEs prepared by EPD was also investigated. Additionally, consecutive cyclic voltammetric tests demonstrated that the MWCNT CE fabricated by EPD possessed excellent electrochemical stability. In comparison with MWCNT CEs fabricated by tape-casting approach, MWCNT CEs prepared by EPD presented a superior adhesion between MWCNT deposits and conducting glass substrates. Therefore, MWCNT CEs fabricated by EPD can be of great potential for use in low-cost plastic DSSCs.     

Fabrication of double-walled carbon nanotube counter electrodes for dye-sensitized solar sells

Double-walled carbon nanotubes (DWCNTs) have been studied for counter-electrode application in dye-sensitized solar cells (DSCs). Mesoporous TiO2 films are prepared from the commercial TiO2 nanopowders by screen-printing technique on optically transparent-conducting glasses. A metal-free organic dye (indoline dye D102) is used as a sensitizer. DWCNTs are applied to substitute for platinum as counter-electrode materials. Morphological and electrochemical properties of the formed counter electrodes are investigated by scanning electronic microscopy and electrochemical impedance spectroscopy, respectively. The electronic and ionic processes in platinum and DWCNT-based DSCs are analyzed and discussed. The catalytic activity and DSC performance of DWCNTs and Pt are compared. A conversion efficiency of 6.07% has been obtained for DWCNT counter-electrode DSCs. This efficiency is comparable to that of platinum counter-electrode-based devices.     

Transferred vertically aligned N-doped carbon nanotube arrays: use in dye-sensitized solar cells as counter electrodes

We prepared vertically aligned nitrogen doped carbon nanotubes (CNTs) on a rigid glass substrate or flexible plastic substrate via a 'growth-detachment-transfer' process and the vertically aligned N-doped CNT arrays are employed as counter electrodes for novel dye-sensitized solar cells.     

Application of carbon materials as counter electrodes of dye-sensitized solar cells

Hard carbon spherule (HCS) has been investigated as a counter electrode for dye-sensitized solar cells. The overall conversion efficiency of the cell reached 5.7%, which is comparable to 6.5% of the counter electrode of platinum-sputtered fluorine-doped tin oxide used in Grätzel-type solar cells under the same experimental condition. It is found that the photovoltaic performance was strongly affected by the specific surface areas of the carbon materials.     

Platinum/carbon black composites as counter electrodes for high-performance dye-sensitized solar cells

Journal of Solid State Electrochemistry - Low-cost counter electrodes for dye-sensitized solar cells (DSSCs) are prepared using platinum/carbon black (Pt/CB) composites via a spin-coating process....     

High-performance Pt-NiO nanosheet-based counter electrodes for dye-sensitized solar cells

High-performance counter electrodes for dye-sensitized solar cells (DSSCs) are fabricated with platinum-nickel oxide (Pt-NiO) nanosheets as catalytic materials. Firstly, the Pt-Ni nanosheets are synthesized via galvanic replacement reaction between pre-synthesized Ni nanosheets and an aqueous H₂PtCl₆ solution. Secondly, after thermal treatment in air, the Pt-Ni alloys are turned to Pt-NiO nanosheets. The related data of cyclic voltammetry, electrochemical impedance spectroscopy, and Tafel polarization reveal that Pt-NiO counter electrodes show highly catalytic activity and low charge transfer resistance. The DSSC with Pt-NiO counter electrode exhibits power conversion efficiency (PCE) of 8.40 %, which is lower than that of the DSSC containing commercial available Pt counter electrode (9.15 %) under full sunlight illumination (100 mW cm^?2, AM1.5G). However, owing to the extremely high transparency of Pt-NiO counter electrode, when putting an Ag mirror behind the back side of the DSSC, the reflected light can bring great enhanced PCE (11.27 %).     

Non-precious transition metal-based counter electrodes for dye-sensitized solar cells

Journal of Solid State Electrochemistry - A non-platinum metal catalyst, TiNx-C, was synthesized through the high-pressure pyrolysis method, which was characterized using a transmission electron...     

Economical Pt-free catalysts for counter electrodes of dye-sensitized solar cells

Three classes (carbides, nitrides and oxides) of nanoscaled early-transition-metal catalysts have been proposed to replace the expensive Pt catalyst as counter electrodes (CEs) in dye-sensitized solar cells (DSCs). Of these catalysts, Cr(3)C(2), CrN, VC(N), VN, TiC, TiC(N), TiN, and V(2)O(3) all showed excellent catalytic activity for the reduction of I(3)(-) to I(-) in the electrolyte. Further, VC embedded in mesoporous carbon (VC-MC) was prepared through in situ synthesis. The I(3)(-)/I(-) DSC based on the VC-MC CE reached a high power conversion efficiency (PCE) of 7.63%, comparable to the photovoltaic performance of the DSC using a Pt CE (7.50%). In addition, the carbide catalysts demonstrated catalytic activity higher than that of Pt for the regeneration of a new organic redox couple of T(2)/T(-). The T(2)/T(-) DSCs using TiC and VC-MC CEs showed PCEs of 4.96 and 5.15%, much higher than that of the DSC using a Pt CE (3.66%). This work expands the list of potential CE catalysts, which can help reduce the cost of DSCs and thereby encourage their fundamental research and commercial application.     

Preparation of polypyrrole/multi-walled carbon nanotube hybrids by electropolymerization combined with a coating method for counter electrodes in dye-sensitized solar cells

In this work, multi-wall carbon nanotubes coated with polypyrrole (PPy/MWCNT) have been used as counter electrode (CE) materials for dye-sensitized solar cells (DSSCs). PPy was deposited onto fluorine-doped tin-oxide-coated glass by electrochemical polymerization of pyrrole. Three surfactants were used in the preparation of the hybrids: cationic cetyltrimethylammonium bromide, anionic sodium dodecylbenzenesulfonate (DBSNa), and non-ionic polyoxyethylene sorbitan monolaurate (Tween20). The morphologies of the PPy and PPy/MWCNT hybrids were investigated using scanning electron spectroscopy. Chemical composition of the prepared CEs was determined by X-ray photoelectron spectroscopy and Fourier-transformed infrared spectroscopy. The catalytic activity of the PPy and PPy/MWCNT layers was evaluated using cyclic voltammetry, and the photovoltaic properties of DSSCs with PPy and PPy/MWCNT CEs were characterized using I–V measurements. PPy/MWCNT samples that were prepared by electrochemical polymerization showed the best results when the anionic surfactant DBSNa was used during polymerization. The photoelectric conversion efficiency of PPy/MWCNT prepared by electrochemical polymerization was 2.9%, which was 59% of that of Pt CE (4.9%).     

Economical and effective sulfide catalysts for dye-sensitized solar cells as counter electrodes

Molybdenum sulfide (MoS(2)) and tungsten sulfide (WS(2)) are proposed as counter electrode (CE) catalysts in a I(3)(-)/I(-) and T(2)/T(-) based dye-sensitized solar cells (DSCs) system. The I(3)(-)/I(-) based DSCs using MoS(2) and WS(2) CEs achieved power conversion efficiencies of 7.59% and 7.73%, respectively.     

Synthesis of various carbon incorporated flower-like MoS2 microspheres as counter electrode for dye-sensitized solar cells

Journal of Solid State Electrochemistry - A flower-like molybdenum disulfide microspheres and various carbon materials (acetylene black, vulcan carbon, multi-walled carbon nanotubes, carbon...     

低成本WS_2染料敏化电池对电极的低温制备

采用简单的方法,在低温条件下制作了高效的WS2对电极,并用X射线衍射仪(XRD)、显微共焦拉曼光谱仪(Raman)和扫描电子显微镜(SEM)对材料的物理特性进行了表征.WS_2对电极的电化学催化活性用循环伏安(CV)和光电流密度-电压特性(I-V)来评价.利用所制备WS_2对电极组装的染料敏化太阳能电池的光电转换效率为5.48%略低于Pt对电极(6.6%).研究表明WS_2是一种很有前景的染料敏化太阳能电池Pt对电极替代材料.     

Spray coated multi-wall carbon nanotube counter electrode for tri-iodide (I3-) reduction in dye-sensitized solar cells

Spray coated multi-wall carbon nanotube (CNT) film on fluorine-doped tin oxide glass substrate has been investigated as a counter electrode for tri-iodide reduction in dye-sensitized solar cells. The photovoltaic parameters, in particular, the fill factor shows a strong dependency on the spraying time of multi-wall CNTs. Under one sun illumination (100 mW cm⁻², AM 1.5 G), the device shows a maximum energy conversion efficiency of 7.59%. Electrochemical impedance spectroscopy analysis reveals a decrease in the charge transfer resistance of multi-wall CNT counter electrode with increase of spraying time; leads to an improvement in the photovoltaic parameters.     

Highly interconnected ordered mesoporous carbon-carbon nanotube nanocomposites: Pt-free, highly efficient, and durable counter electrodes for dye-sensitized solar cells

We report the preparation of highly interconnected ordered mesoporous carbon-carbon nanotube nanocomposites which show Pt-like dye-sensitized solar cell (DSSC) efficiency and remarkable long-term durability as DSSC counter electrodes.     

Electrospun NiCo2S4 with extraordinary electrocatalytic activity as counter electrodes for dye-sensitized solar cells

Journal of Solid State Electrochemistry - The performance of dye-sensitized solar cells (DSSCs) is critically dependent on the catalytic activity of their counter electrode (CE) materials. There...     

Transparent graphene/PEDOT–PSS composite films as counter electrodes of dye-sensitized solar cells

Composite films of graphene and polystyreneslufonate doped poly(3,4-ethylenedioxythiophene) (graphene/PEDOT–PSS) were deposited on indium tin oxide (ITO) substrates by spin coating at room temperature and applied as counter electrodes of dye-sensitized solar cells (DSSCs). A 60 nm thick composite film (contained 1 wt% graphene) coated ITO electrode exhibited high transmittance (>80%) at visible wavelengths and high electrocatalytic activity. The energy conversion efficiency of the cell with this film as counter electrode reached 4.5%, which is comparable to 6.3% of the cell with platinum counter electrode under the same experimental condition.     

Employing electrostatic self-assembly of tailored nickel sulfide nanoparticles for quasi-solid-state dye-sensitized solar cells with Pt-free counter electrodes

A low cost, low-temperature processable, highly efficient nickel sulfide counter electrode is demonstrated. Using the tailored, preformed nickel sulfide nanoparticles and electrostatic self-assembly, a novel counter electrode was fabricated that exceeded the efficiency of a conventional Pt-based cell.